My Bluetooth keeps saying wrong pin with all my devices and even the car. Any ideas on how to troubleshoot this! Ps. I'm on 4.5.8 cleaned installed.
Thanks
Hello,
I'm getting the same issue with my OnePlus5.
I'm not able to connect any device with bluetooth and each time I try to pair a device (car, smartwatch, other smartphone galaxy S6), the other device shows a pin code and asks if the same on the OnePlus5 but nothing happens on my OnePlus5.
after few seconds (about 30), I get pairing failed message saying "Couldn't pair with DeviceName because of an incorrect PIN or passkey."
Could you please help how to solve the issue. Thanks in advance.
My Device is:
OnePlus 5
OS / Version : OxygenOS 4.5.14
Recovery (stock/twrp/autre) : stock
Root (oui/non) : no
not getting passkey/pin accept prompt on the phone. Smartwatch & phone see one another and the phone attempts pairing, while the smartwatch displays code, but then the phone does nothing, timing out and giving wrong code message. Running 5.02
How can I get the phone to take the next step, to display a passkey confirm prompt? Have I defeated the popup with some other sw e.g. Malware bytes?
p1gnone said:
not getting passkey/pin accept prompt on the phone. Smartwatch & phone see one another and the phone attempts pairing, while the smartwatch displays code, but then the phone does nothing, timing out and giving wrong code message. Running 5.02
How can I get the phone to take the next step, to display a passkey confirm prompt? Have I defeated the popup with some other sw e.g. Malware bytes?
Click to expand...
Click to collapse
It didn't work for me with my smartwatch if I choose Bluetooth LE.
What's your setup?
strongst said:
It didn't work for me with my smartwatch if I choose Bluetooth LE.
What's your setup?
Click to expand...
Click to collapse
OP5 with 5.02 Oos, rooted, twrp recovery.. what do mean by setup?
p1gnone said:
OP5 with 5.02 Oos, rooted, twrp recovery.. what do mean by setup?
Click to expand...
Click to collapse
Exactly that plus which Smartwatch and Bluetooth or Bluetooth LE
strongst said:
Exactly that plus which Smartwatch and Bluetooth or Bluetooth LE
Click to expand...
Click to collapse
LG Urbane3520 and the system Bluetooth. What do you mean by Bluetooth LE?
p1gnone said:
LG Urbane3520 and the system Bluetooth. What do you mean by Bluetooth LE?
Click to expand...
Click to collapse
How do you connect to the watch? With Bluetooth or Bluetooth LE. My Pebble Time Steel provides both, but with LE im also getting no pass key. That's why I'm asking about connection
strongst said:
How do you connect to the watch? With Bluetooth or Bluetooth LE. My Pebble Time Steel provides both, but with LE im also getting no pass key. That's why I'm asking about connection
Click to expand...
Click to collapse
My system/stock Bluetooth pairs just fine with headsets, GoogleHome, my cars A3 & A4, even with my Dell Laptop
Asking for if anyone with similar OP5/5.02 has had similar experience so to see if it is intrinsic or due to other sw interactions.
p1gnone said:
My system/stock Bluetooth pairs just fine with headsets, GoogleHome, my cars A3 & A4, even with my Dell Laptop
Asking for if anyone with similar OP5/5.02 has had similar experience so to see if it is intrinsic or due to other sw interactions.
Click to expand...
Click to collapse
Seems like a watch problem, cause I have also an audi A4(2016) and Bluetooth headsets and several connections to other cars and Bluetooth hands free
Maybe someone with the same Smartwatch and op5 can test?
strongst said:
Seems like a watch problem, cause I have also an audi A4(2016) and Bluetooth headsets and several connections to other cars and Bluetooth hands free
Maybe someone with the same Smartwatch and op5 can test?
Click to expand...
Click to collapse
New watch. Wife got it as a tester. Not sure its even in the market yet. Who among your associates has an OP5? Me? none.
Watch generates&displays passkey, sees phone
Phone sees watch
User starts pairing
Phone never prompts passkey acceptance
So this seems like the phone is the problem? not to me.
[other background] Paired just fine with an iphone7
SO your ultimate contribution was to suggest that find someone with the same hardware combo? LOL. The point of a forum is for far flung users to share related experience and insights.. SO your ultimate contribution was to suggest find someone with the same hardware combo? LOL.
p1gnone said:
New watch. Wife got it as a tester. Not sure its even in the market yet. Who among your associates has an OP5? Me? none.
Watch generates&displays passkey, sees phone
Phone sees watch
User starts pairing
Phone never prompts passkey acceptance
So this seems like the phone is the problem? not to me.
[other background] Paired just fine with an iphone7
SO your ultimate contribution was to suggest that find someone with the same hardware combo? LOL. The point of a forum is for far flung users to share related experience and insights.. SO your ultimate contribution was to suggest find someone with the same hardware combo? LOL.
Click to expand...
Click to collapse
It was not my ultimate contribution to find one with the same watch, just a suggestion, but... It's a new watch, new to the market and it didn't pair with your op5 but with an iPhone 7. Maybe it's a problem of the watch if it's new several phones wouldn't supported maybe.
And since other devices pair successfully with your op5, where to look further? Maybe you have another android phone and can check?
strongst said:
It was not my ultimate contribution to find one with the same watch, just a suggestion, but... It's a new watch, new to the market and it didn't pair with your op5 but with an iPhone 7. Maybe it's a problem of the watch if it's new several phones wouldn't supported maybe.
And since other devices pair successfully with your op5, where to look further? Maybe you have another android phone and can check?
Click to expand...
Click to collapse
Not due to the iphone7 pairing. It's unpaired now and it returns to stock when unpairing.
So yeah, will pair/attempt with the wife's S9+ this evening.
Thanks
Related
Hello all !
I just received my DZ09 smartwatch but I can't pair it with my LG G3 phone.
I think I'm going crazy ! :silly:
My watch can see my phone, but my phone can't see my watch !
Sometime I can see a device called "Misc" in my phone... but I can't connect with it.
When I try to pair my watch to my phone, the watch says "Pairing..." for 10 secondes and then "Pairing failed".
I don't receive any notification on my LG G3.
I tried to pair my watch on my colleagues phones and it works (Samsung S5, and other phones...).
Am I the only one who can't get it work ?
Can someone help me please?
Thanks!
Flo
hello_im_flo said:
Hello all !
I just received my DZ09 smartwatch but I can't pair it with my LG G3 phone.
I think I'm going crazy ! :silly:
My watch can see my phone, but my phone can't see my watch !
Sometime I can see a device called "Misc" in my phone... but I can't connect with it.
When I try to pair my watch to my phone, the watch says "Pairing..." for 10 secondes and then "Pairing failed".
I don't receive any notification on my LG G3.
I tried to pair my watch on my colleagues phones and it works (Samsung S5, and other phones...).
Am I the only one who can't get it work ?
Can someone help me please?
Thanks!
Flo
Click to expand...
Click to collapse
I have the exact same issue on my oneplus one, did you ever get it fixed? Thank you.
kyan31 said:
I have the exact same issue on my oneplus one, did you ever get it fixed? Thank you.
Click to expand...
Click to collapse
Try this app: com.mtk.btnotification
I have the same issue, where my phone (Nexus 4) cannot see my watch. My watch can see my phone, but the pairing fails.
From my computer (using a USB bluetooth adapter), I can pair with both the Nexus 4 and the DZ09, so I'm assuming that both of their bluetooth functionality is working.
Did either of you find a fix for this?
@dhruvdiatm, neither app (BTNotification or Mediatek Smartdevice) make a difference; it seems to be an issue with the bluetooth connectivity and not the specific apps that you use.
I also having same issue. But my other phone can.
The only one cannot search the smartwatch is Xiaomi Miui.
Anyone can help. Please.
This apk work for me in android 6.0: "Craig Smart Watch". (playstore apk, runners on photo)
Pros:
Bluetooth notify OK
Cons:
Pedometer Sync Fail.
For some reason, my phone and ZenWatch 2 randomly un-pair then try to pair a few seconds after. The weirdest part is that even this happens smart lock gets disabled. I have to be turned back on and add the watch as a trusted device again. It happens maybe once a week and while not a big deal, it is starting to get annoying.
Both are running the latest firmware and Android release. I have performed factory resets on the watch but I'm trying to avoid doing do on my phone. The watch is missing from the bluetooth devices menu do it's not an Android Wear app connection issue. Has this happened anyone?
gumbyx84 said:
For some reason, my phone and ZenWatch 2 randomly un-pair then try to pair a few seconds after. The weirdest part is that even this happens smart lock gets disabled. I have to be turned back on and add the watch as a trusted device again. It happens maybe once a week and while not a big deal, it is starting to get annoying.
Both are running the latest firmware and Android release. I have performed factory resets on the watch but I'm trying to avoid doing do on my phone. The watch is missing from the bluetooth devices menu do it's not an Android Wear app connection issue. Has this happened anyone?
Click to expand...
Click to collapse
I don't have a ZenWatch... I have a Pebble Time so I can't really help you but I did have issues trying to get mine to pair and not showing in the bluetooth screen. I found that I had to go into the watch and the settings / bluetooth before the watch would "broadcast" and be available to be "found" in the bluetooth list so that may be one thing you can check with the Zenwatch .. have the settings for the bluetooth open on the watch then try to find it on the Axon 7. I also couldn't pair it in that spot ... it kept giving me a "passcode" error. I had to go to the Pebble app on the phone and pair it through the app.
As for the random unpairing ... sorry to say I don't really have any suggestions on that .. that may be the watch itself ... my pebble has never unpaired once it has been connected.
JohnOrion said:
I don't have a ZenWatch... I have a Pebble Time so I can't really help you but I did have issues trying to get mine to pair and not showing in the bluetooth screen. I found that I had to go into the watch and the settings / bluetooth before the watch would "broadcast" and be available to be "found" in the bluetooth list so that may be one thing you can check with the Zenwatch .. have the settings for the bluetooth open on the watch then try to find it on the Axon 7. I also couldn't pair it in that spot ... it kept giving me a "passcode" error. I had to go to the Pebble app on the phone and pair it through the app.
As for the random unpairing ... sorry to say I don't really have any suggestions on that .. that may be the watch itself ... my pebble has never unpaired once it has been connected.
Click to expand...
Click to collapse
I didn't have this issue with my last phone (HTC m9) so I don't think it's the watch
gumbyx84 said:
I didn't have this issue with my last phone (HTC m9) so I don't think it's the watch
Click to expand...
Click to collapse
sorry for replying and giving you hope you had an answer ... I figured I would just relay my small issues because I never had those issues with my old Galaxy but had a bit with the Axon. Plus the Pebble doesn't use android wear so I really haven't had any experience with it ... sorry again for not actually providing any real help
I had the same issues with zenwatch and zenwatch 2 on different phones. So I just returned them. I assumed the zenwatch's just wouldn't work on Samsung devices. So maybe similar for you is and isn't the watch.
I currently have Samsung gear s2 working fine with phone. (There is issue with phone calls but that is great software issue on every phone other then Samsung)
I had the same issues with my zenwatch2. First the bluetooth devicelist on the phone was empty,no paired devices, i had to do a reset on the watch and pair it new.
This week i had the reconnect issue so i deactivated the audio playback in the zenwatchin settings, now everything works fine.
simsn said:
I had the same issues with my zenwatch2. First the bluetooth devicelist on the phone was empty,no paired devices, i had to do a reset on the watch and pair it new.
This week i had the reconnect issue so i deactivated the audio playback in the zenwatchin settings, now everything works fine.
Click to expand...
Click to collapse
I'll give that a try
I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.
Hi,
Did you get a solution ? I face the same problem and can't find any solution...
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....
I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?
Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk
yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.
Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.
I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10
i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11
Yes, it is strange. After some restarts and on/offs connection suddenly appears
Hi.
I have the 5, upgrade from HTC which I never though I would leave.
Don't know how good a galaxy S9 is but it can't be much better than this, an amazing jump from the HTC :0)
My Bluetooth picks up my car and bathroom speaker fine.
When I try and hook up my forerunner 645 music the connection just isn't there.
At first I thought it was the phone, then I imagined it was the 645, now...I just don't know.
When my Bluetooth is on (phone) it shows as 'Disconnected' in the menu system even though the bathroom speaker connects!
I've read that the pairing on a forerunner 645 can be weak but you would imagine it would work sometimes.
It says 'waiting for phone' on the watch but the watch doesn't show up after a phone-reboot.
Have tried all I know and am stuck.
Could it be the watch?
Can you guys can help?
Thanks for your time in advance, ste.
ste20man said:
Hi.
I have the 5, upgrade from HTC which I never though I would leave.
Don't know how good a galaxy S9 is but it can't be much better than this, an amazing jump from the HTC :0)
My Bluetooth picks up my car and bathroom speaker fine.
When I try and hook up my forerunner 645 music the connection just isn't there.
At first I thought it was the phone, then I imagined it was the 645, now...I just don't know.
When my Bluetooth is on (phone) it shows as 'Disconnected' in the menu system even though the bathroom speaker connects!
I've read that the pairing on a forerunner 645 can be weak but you would imagine it would work sometimes.
It says 'waiting for phone' on the watch but the watch doesn't show up after a phone-reboot.
Have tried all I know and am stuck.
Could it be the watch?
Can you guys can help?
Thanks for your time in advance, ste.
Click to expand...
Click to collapse
Please mention your current rom, latest betas and stables have improved bluetooth functionality. I don't have problems on several cars, headsets and Smartwatch...
Unsure of the Forerunner 645 Music right now.
strongst said:
Please mention your current rom, latest betas and stables have improved bluetooth functionality. I don't have problems on several cars, headsets and Smartwatch...
Click to expand...
Click to collapse
Have attached a screenshot of what I think the info is that you wanted.
Hope I got the right stuff.
I'm pretty sure my phone is up to date.
It picks up other Bluetooth, just not the watch, it's very patchy, that's what makes me think it's the watch and not the phone.
What do you reckon? I'm not that technically minded unfortunately.
Cheers, ste
ste20man said:
Have attached a screenshot of what I think the info is that you wanted.
Hope I got the right stuff.
I'm pretty sure my phone is up to date.
It picks up other Bluetooth, just not the watch, it's very patchy, that's what makes me think it's the watch and not the phone.
What do you reckon? I'm not that technically minded unfortunately.
Cheers, ste
Click to expand...
Click to collapse
Ok, but I think I can be the watch itself. Do you connect with an app? Is this app excluded from battery optimization?
Joying JY-VOS01N4GS w/ an SC-9853i 1.8GHz Octa-core, installed in a 1991 Toyota MR2 with a Honda K24A2 turbo engine swapped into it, controlled by an ECU called a Hondata KPro V4.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143309152617
I can install and run Hondata or RealDash apps on the stereo without issue, but I can't get it to connect to the ECU itself so I'm looking for suggestions. I've got a $20 no name tablet or a 7+ yrs old Samsung Note 3....all connect to the KPro without issue. Hondata, RealDash and Torque apps all connect without issue on the tablet or phone. New $350+ stereo...keeps giving me failed to connect error.
I'm open to rooting if needed, installing a different Bluetooth app, I have the pin to access developer options, etc....I just need it to connect and work.
m5james said:
Joying JY-VOS01N4GS w/ an SC-9853i 1.8GHz Octa-core, installed in a 1991 Toyota MR2 with a Honda K24A2 turbo engine swapped into it, controlled by an ECU called a Hondata KPro V4.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143309152617
I can install and run Hondata or RealDash apps on the stereo without issue, but I can't get it to connect to the ECU itself so I'm looking for suggestions. I've got a $20 no name tablet or a 7+ yrs old Samsung Note 3....all connect to the KPro without issue. Hondata, RealDash and Torque apps all connect without issue on the tablet or phone. New $350+ stereo...keeps giving me failed to connect error.
I'm open to rooting if needed, installing a different Bluetooth app, I have the pin to access developer options, etc....I just need it to connect and work.
Click to expand...
Click to collapse
It will not pair. Joying (actually FYT/SYU) crippled the bluetooth on their units. You can only pair with phones and a few OBD and TPMS BT devices.
For the rest: nothing.
And that is done onto the lowest compiled level including the MCU. Other drivers/apps/kernels/whatever will not work.
I've been writing Joying and they offered to sell me their OBDII dongle at a discount. I explained to them shortly before writing this post that the car doesn't have an OBDII port since it's a 91, lightly explained the engine sway, but I haven't heard anything yet. Why would they go through all that effort...just to force us to buy their $15 OBDII dongle?
What about universal Bluetooth dongle plugged into one of the USB cords? Or maybe even USB to USB? The ECU has a USB port that I use when I connect to my laptop to run KPro Manager (a Windows PC based program) and the RealDash app on Android does give me the option of Bluetooth, USB or serial input. I'm currently monitoring from this tablet which is completely illegible while driving, needs to be manually powered on/off and then reconnected to Bluetooth...not being able to see the gauges on a much larger screen and automatically reconnect when I start the car crushes EVERY reason why I bought this stereo. There's gotta be a way.
Wrote a long reply, stupid token expired...I'm gonna try this.
https://www.hondata.com/forum/viewtopic.php?t=18829
Bluetooth dongle didn't work, but I can't confirm if it's a dongle issue since I can connect to it but then the Hondata app says "Ignition not on" when it is. Nevertheless today I played around with the GF's cwr who has a Joying JY-HOS02P4 screen in hers, it's only 3 months old, and it'll connect to my Hondata just fine! Would it be as simple as taking the Bluetooth APK from her car and installing it on mine?
Bump for help...there's gotta be a way :/
Bumping again, hoping maybe someone can help.
Following - need this for ECUTEK bluetooth adapter in my GTR, otherwise the screen is worthless...
m5james said:
Bumping again, hoping maybe someone can help.
Click to expand...
Click to collapse
Like mentioned a couple of posts above. Joying crippled Bluetooth and there is simply no "normal" bluetooth stack.
You cannot alter the current BT app as it won't be signed correctly anymore and it will not even be visible anymore.
You cannot add another BT app as that will not have the correct signing either.
Your question is not new. This BT "not being able to pair" is already an issue since 2016. You would be the first to find a solution.
The only thing you can try is what I described in this post, based on info from ojuniour.
Having said that: you should also search the rest of the forum and not only stick to your own question. Otherwise you might already have tried what I described. It might work, it might not.
Surfer, thank you so much for the reply. I've read in depth and was fearful of that, but will try what is in the thread you linked. If you'd be so kind, couple questions that you may have answers to:
- I have a sofia 9853 with android 8.1 (upgrading to 9.0), does that make things better worse or same for the bluetooth situation?
- I've seen some talk on much older threads of using Comfast® CF-WU725B as an external/usb bluetooth solution? Did this (or an alternative dongle) ever or does it still work?
- I've also seen talk of used xposed modules to add bluetooth devices to the whitelist - is there any truth to this?
Surfer, thanks in advance, this is for a tesla screen in a GTR. By removing the stock screen we lose a ton of critical info that can only be gotten back through ecutek, which currently only has a bluetooth solution for android.
M5James - sorry for hijacking your thread, but hopefully this helps you as well
xadamadax said:
Surfer, thank you so much for the reply. I've read in depth and was fearful of that, but will try what is in the thread you linked. If you'd be so kind, couple questions that you may have answers to:
- I have a sofia 9853 with android 8.1 (upgrading to 9.0), does that make things better worse or same for the bluetooth situation?
- I've seen some talk on much older threads of using Comfast® CF-WU725B as an external/usb bluetooth solution? Did this (or an alternative dongle) ever or does it still work?
- I've also seen talk of used xposed modules to add bluetooth devices to the whitelist - is there any truth to this?
Click to expand...
Click to collapse
1. There is no Sofia 9853. There is a Intel Sofia AND an Intel SC9853i. Those are 2 different CPUs needing different ROMs.
2. No idea. Like mentioned: an external BT dongle has not worked till now, but I have never heard of that Confast one.
3. Xposed is not supported on the 9853i. Not on Android 8.1 and neither on 9.0
@surfer63, thank you again, your thread here (https://forum.xda-developers.com/an...qa-tips-info-roll-joying-fyt-sc9853i-t3979377) helped me tremendously
@m5james, on a whim i plugged in ecutek to usb via the usb mini port, and shockingly there is support for it. Maybe try the same with Hondata if there is an sort of interface on it.
surfer63 said:
Like mentioned a couple of posts above. Joying crippled Bluetooth and there is simply no "normal" bluetooth stack.
You cannot alter the current BT app as it won't be signed correctly anymore and it will not even be visible anymore.
You cannot add another BT app as that will not have the correct signing either.
Your question is not new. This BT "not being able to pair" is already an issue since 2016. You would be the first to find a solution.
The only thing you can try is what I described in this post, based on info from ojuniour.
Having said that: you should also search the rest of the forum and not only stick to your own question. Otherwise you might already have tried what I described. It might work, it might not.
Click to expand...
Click to collapse
Fair enough...honestly like 10 +/-yrs ago I was WAY more into custom ROMs, baking, etc etc but nowadays I feel like it's over my head again. The only reason why I asked about using other BT versions from other Joying devices is because the GF's similarily aged stereo was able to connect, but I understand the signing thing since our two stereos don't share the same OS and CPU.
xadamadax said:
M5James - sorry for hijacking your thread, but hopefully this helps you as well
Click to expand...
Click to collapse
You're fine, the more exposure the merrier...I'm not as good at this stuff as I used to be so I'm just hoping someone smarter than me can help
xadamadax said:
@surfer63, thank you again, your thread here (https://forum.xda-developers.com/an...qa-tips-info-roll-joying-fyt-sc9853i-t3979377) helped me tremendously
@m5james, on a whim i plugged in ecutek to usb via the usb mini port, and shockingly there is support for it. Maybe try the same with Hondata if there is an sort of interface on it.
Click to expand...
Click to collapse
Do you have a pic of how you physically hooked it up? I haven't touched much on this subject since my original post and honestly don't recall the connections at the moment but I do recall mine having a square port (I don't know it's official name) that allows me to connect via USB to a laptop. I think I even tried connecting directly to the stereo that way but no luck.
Hondata runs on the screen easily in both portrait and landscape mode but I prefer RealDash, which at doesn't like portrait mode...I'm hoping it's something I can adjust to fit myself since RealDash allows for customisable gauges.
@m5james that is a micro usb port you have, try connecting it to a usb port on the head unit (same way you would a laptop) and open your hondata app - with any luck you'll be in business. If one port doesn't work, try the other - good luck
If you guys want to use the bluetooth pairing with basically about anything then buy the "Stop" brand. Unit actually confess with 2 BT models. One for music and phone call, the other one is located in the android bluetooth setting that would enable you to pair with anything.
ojuniour said:
If you guys want to use the bluetooth pairing with basically about anything then buy the "Stop" brand. Unit actually confess with 2 BT models. One for music and phone call, the other one is located in the android bluetooth setting that would enable you to pair with anything.
Click to expand...
Click to collapse
I looked on eBay for "stop android DIN" and nothing comes up.
m5james said:
I looked on eBay for "stop android DIN" and nothing comes up.
Click to expand...
Click to collapse
lol my bad I mean Atoto.. Damn auto correction.
here is an example of one connecting to ecuTek obd bluetooth:
https://www.ft86club.com/forums/showthread.php?t=141515
xadamadax said:
@m5james that is a micro usb port you have, try connecting it to a usb port on the head unit (same way you would a laptop) and open your hondata app - with any luck you'll be in business. If one port doesn't work, try the other - good luck
Click to expand...
Click to collapse
Wait wait wait. Wait a minute.... Are you saying you are able to get the ecuTek OBD bluetooth to work in wired mode[ to the head unit] without connecting to it wirelessly through bluetooth?
And you are using the ecuTek App?