since service isn't working for the lineage roms, I decided on the next best thing the n - ify module
I don't want a boot loop though so that's why I'm asking this question
Tried it it | works
I just went ahead and tried it myself because there is a way to recover from xposed bootloops.
you wont have to worry because xposed works on this phone
Related
First of all I would like to state that I am running echo-rom, I would like to have posted in there but the thread is closed.
My first problem is that the expandable volume menu does not work, this happened to me before with other roms (all on TW) but I couldn't be bothered until now. Whenever I click the gear icon which should expand, it doesn't work. It works before (until I do something?). Anyway I flashed the rom yesterday and didn't bother configuring/customizing it until today. I will try to describe anything I did until the point I noticed it broke again.
I enabled xposed framework, with the modules: wanam xposed, enable battery stats for kitkat, gravitybox, app-settings and xposed torch.
I tweaked some stuff in wanam xposed and in the echo customization center.
Anyway I don't really know what caused it, if no one knows why I will try to pay attention next time when it happens.
The second problem is that whenever I try to swipe down to open my notification bar it doesn't want to work half the time. On my home screen the statusbar turns black (instead of transparent), so there is some sort of registration of touch? I proceed to let go of my finger and and then try again. I also thought that I could have misplaced my finger but I don't know why the statusbar would turn black then.
If anyone knows or has encountered this problem before please share,
much appreciated.
I dunno know but i tried exposed once with a slimrom and it messed my phone up really bad upto the point everything was force crashing. To me i think exposed is your problem. Try wiping data, cache, dalvik, and format system and boot with cwm recovery then flash official firmware for you phone. DO NOT USE 4.3 FIRMWARE IF YOUR ON A 4.4 ROM!! Look for 4.4 rom instead. Sammobile good site but need registraion and slow download for free users (about 1hour) after that try instakking. Your fav rom without xposed. Im 80% sure it will work
So I fixed it, I disabled both gravitybox and wanam xposed and after the reboot volume expand worked again, then I enabled wanam xposed again and it still worked. Either way gravitybox caused it, or it was caused by a conflict between the two.
Also the statusbar problem, my rom has an option where you double-tap the battery icon to change the style of it, I noticed by trying to swipe down from the battery icon it doesnt work. So there you have it. Problem solved
The reason is really simple. You don't read before you install the modules.
You can't use Gravitybox on a TW based rom. It's states that in the description. Gravitybox is for aosp only!
Same applies for the post from 189cutter. Wanam Xposed is only for TW based roms. Slimrom is clearly no TW based rom.
So if you want to use the modules, read if they are for your rom. Also make sure that there is no overlapping in functions, because that could cause strange problems as well.
Point taken but im never ever ever gonna use xpose or such things like it lol now im using cm m9 and its perfect lol
Hi guys,
I've been stuck with this problem for a month. PLEASE HELP otherwise I have to get rid of the phone...:crying:
I was on IMPERIUM 10 with XPOSED Framework active. One day it asked for an update of one of the standard module (I cant remember which one). After the process completed, I wasnt able anymore to use Wifi and BT. Even after reverting the module to the previous version or disabling XPOSED. Sometimes I could use WiFi and BT after a reset for a while, but again they turned off.
I've tried to reinstall IMPERIUM with full wipe, other SAMSUNG ROMs with XPOSED and CM11 (w/o XPOSED) but nothing. Besides, I've tried several modems (with ODIN) and NO SUCCESS as well.
Do you have any suggestion PLEASE?
Hello there, I've been using the V20(H918) for a little while now and was running WETA Rom 4.8.5 with Magisk 11.0. When Magisk 12.0 released after rebooting and being on for a minute or 2 my phone would suddenly go back to the T-mo splash screen as if it were soft rebooting and then would repeat this process. I thought it might have been a download or flash issue so I tried wiping and doing a fresh install but if I ever restarted the device the same issue would appear. I've tried selecting or deselecting a majority of the options in the aroma installer for WETA but nothing seems to work. The rom seems to work fine with SuperSU installed so I'm thinking it might be something about the way my phone is set up but I haven't been able to pinpoint exactly what it is and I really would like to use Magisk for the hide feature. Based on the thread it doesn't seem like there should be any issues and I'm unable to ask my question directly in the thread. I'm not very experienced with these kinds of things so I'm sorry if I'm not being specific enough or if the solution is obvious. Thanks for anyone's help and time with this issue!
survivingarch said:
Hello there, I've been using the V20(H918) for a little while now and was running WETA Rom 4.8.5 with Magisk 11.0. When Magisk 12.0 released after rebooting and being on for a minute or 2 my phone would suddenly go back to the T-mo splash screen as if it were soft rebooting and then would repeat this process. I thought it might have been a download or flash issue so I tried wiping and doing a fresh install but if I ever restarted the device the same issue would appear. I've tried selecting or deselecting a majority of the options in the aroma installer for WETA but nothing seems to work. The rom seems to work fine with SuperSU installed so I'm thinking it might be something about the way my phone is set up but I haven't been able to pinpoint exactly what it is and I really would like to use Magisk for the hide feature. Based on the thread it doesn't seem like there should be any issues and I'm unable to ask my question directly in the thread. I'm not very experienced with these kinds of things so I'm sorry if I'm not being specific enough or if the solution is obvious. Thanks for anyone's help and time with this issue!
Click to expand...
Click to collapse
alot of people have this problem with 12.0 flash the 11.0 and dont update
survivingarch said:
Hello there, I've been using the V20(H918) for a little while now and was running WETA Rom 4.8.5 with Magisk 11.0. When Magisk 12.0 released after rebooting and being on for a minute or 2 my phone would suddenly go back to the T-mo splash screen as if it were soft rebooting and then would repeat this process. I thought it might have been a download or flash issue so I tried wiping and doing a fresh install but if I ever restarted the device the same issue would appear. I've tried selecting or deselecting a majority of the options in the aroma installer for WETA but nothing seems to work. The rom seems to work fine with SuperSU installed so I'm thinking it might be something about the way my phone is set up but I haven't been able to pinpoint exactly what it is and I really would like to use Magisk for the hide feature. Based on the thread it doesn't seem like there should be any issues and I'm unable to ask my question directly in the thread. I'm not very experienced with these kinds of things so I'm sorry if I'm not being specific enough or if the solution is obvious. Thanks for anyone's help and time with this issue!
Click to expand...
Click to collapse
Im currently running weta rom with magisk 12.0 on my h918. However there are 2 possible differences between yours and mine. 1) you are not in the latest version of weta rom 4.9.4. 2) you are probably flashing the stock kernel that comes in the weta aroma installer. Try with konvergent or another kernel other than the one from weta rom. (as soon as i flashed the weta kernel my phone was experiencing the dame thing yours did , then after i flashed konvergent back it came back to normal)
jinkerz9430 said:
Im currently running weta rom with magisk 12.0 on my h918. However there are 2 possible differences between yours and mine. 1) you are not in the latest version of weta rom 4.9.4. 2) you are probably flashing the stock kernel that comes in the weta aroma installer. Try with konvergent or another kernel other than the one from weta rom. (as soon as i flashed the weta kernel my phone was experiencing the dame thing yours did , then after i flashed konvergent back it came back to normal)
Click to expand...
Click to collapse
Did what you said and everything seems to be running smoothly, thanks very much for your help! Hoping a more updated kernel that doesn't force SuperSU and works with magisk comes out soon!
Hello Guys,
pls help me.. after flashing cm13 RR ... when i m installing watsapp .. bootloop occurs.. camera 360 as well, i flashed stock fimware and the flashed cm13 rr ..but no luck
same problem
I have pretty much the same issue but it's not exclusive to whatsapp, other apps send the phone into a bootloop as well, this started a while ago, I installed the cm12 last year or so and it worked great for a long time, then after a while I tried to install the spotify app and things went south, phone went into bootloop so I deleted it from recovery mode and just ignored the issue. Yesterday I installed the cm13 hoping I would get a clean slate, I did everything right, full wipe, flashed the rom, gapps, patch and front cam fix and although everything kept crashing at first ( google launcher and pixel launcher) I eventually got it working, I installed messenger, worked fine, then tried to install whatsapp and it went into a bootloop. Anyone please help us.
DarudeNotSandstorm said:
I have pretty much the same issue but it's not exclusive to whatsapp, other apps send the phone into a bootloop as well, this started a while ago, I installed the cm12 last year or so and it worked great for a long time, then after a while I tried to install the spotify app and things went south, phone went into bootloop so I deleted it from recovery mode and just ignored the issue. Yesterday I installed the cm13 hoping I would get a clean slate, I did everything right, full wipe, flashed the rom, gapps, patch and front cam fix and although everything kept crashing at first ( google launcher and pixel launcher) I eventually got it working, I installed messenger, worked fine, then tried to install whatsapp and it went into a bootloop. Anyone please help us.
Click to expand...
Click to collapse
exactly.. we were on same page .. pls any one help us
I have the same issue on CM12. Phone get stuck in boot-loop after installing whatsapp latest version. I was able to get out of boot-loop after I deleted whatsapp app.
Its very important to use whatsapp. Please any fix for this?
I couldn't find a fix. The best you can do move to nougat ROMs like aicp or crdroid.
I installed crdroid and it's excellent
I too am now stuck on boot loop due to Whatsapp.
I do not need this app and will happily delete it, if this is what is causing the issues, but my problem is, how do I delete it now that I am stuck in a boot loop?
Enter safe mode and delete the app.
It's better to remove cm12 and install new ROM crdriod
GalaxyNote2_ said:
Enter safe mode and delete the app.
It's better to remove cm12 and install new ROM crdriod
Click to expand...
Click to collapse
Thanks for the reply.
This may sound a bit noob, but how do I get it into safe mode?
I have an Xperia Mini Pro SK17i
I managed to get it into recovery mode earlier, but cannot seem to get into safe mode
Yeah!
It happens in 5.1 / 6 custom roms!
Can any body help ??!!!
You need to read this thread. Every CM rom compiled before 2018 will have this problem.
https://forum.xda-developers.com/showpost.php?p=75391884&postcount=18
Hello guys! I know it's a common issue, but when I reboot my phone there's roughly a 50% chance it gets stuck on the boot screen and I have to reboot. It's surely caused by Magisk, but has someone found a fix already?
The bricks got more frequent and really annoying when I began to install some modules (Xposed, Viper ecc.). Sometimes it takes even 2-3 reboots to start my phone properly, and sometimes it boots without recognizing my sim card.
Is there a fix for this, or do I have to live with it?
Happened to me too. Got rid of magisk for now so running stock un rooted until this gets sorted. Haven't ran into the issue since un rooting.
BetaPix said:
Hello guys! I know it's a common issue, but when I reboot my phone there's roughly a 50% chance it gets stuck on the boot screen and I have to reboot. It's surely caused by Magisk, but has someone found a fix already?
The bricks got more frequent and really annoying when I began to install some modules (Xposed, Viper ecc.). Sometimes it takes even 2-3 reboots to start my phone properly, and sometimes it boots without recognizing my sim card.
Is there a fix for this, or do I have to live with it?
Click to expand...
Click to collapse
Xposed is not yet stable for Oreo. So just get rid of that first. Moreover, it depends on what Magisk version did you flash. V16.0 is the latest stable version and you are recommended to flash it only. I have been using magisk for a long time on both stock and custom rom and never had an issue.
Rowdyy Ronnie said:
Xposed is not yet stable for Oreo. So just get rid of that first. Moreover, it depends on what Magisk version did you flash. V16.0 is the latest stable version and you are recommended to flash it only. I have been using magisk for a long time on both stock and custom rom and never had an issue.
Click to expand...
Click to collapse
I flashed 16.0 too, but I have to say the issue became real even before I installed Xposed. Guess it's something Magisk-related
Try older Magisk, for example 15.3.
Same to me. Just reboot and it´s fine.
BetaPix said:
Hello guys! I know it's a common issue, but when I reboot my phone there's roughly a 50% chance it gets stuck on the boot screen and I have to reboot. It's surely caused by Magisk, but has someone found a fix already?
The bricks got more frequent and really annoying when I began to install some modules (Xposed, Viper ecc.). Sometimes it takes even 2-3 reboots to start my phone properly, and sometimes it boots without recognizing my sim card.
Is there a fix for this, or do I have to live with it?
Click to expand...
Click to collapse
Same. I don't have Xposed or other mods, so I think it's a Magisk's issue.
Made over 20 reboots in order to find the"right" combination of substratum themes the last two days.only 2-3 times i had stucked in reboot. I have magisk, xposed ,gravitybox .
Huh, I get this sometimes too. So it's Magisk v16 you say?
TrueMS said:
Try older Magisk, for example 15.3.
Click to expand...
Click to collapse
Good idea, will give that a go. I don't use any modules anyway, only use it for Safetynet-friendly root.
Same problem here.
I Will follow the topic.
Double post, Sorry!
With beta magisk v16.4 my mi A1 boot normaly...with v16.0 must force reboot 3 times out of 5
laugeek57 said:
With beta magisk v16.4 my mi A1 boot normaly...with v16.0 must force reboot 3 times out of 5
Click to expand...
Click to collapse
Currently testing 16.4b and no boot issues atm!
Must have been topjohnwu's boot operations code change.
Thank you really much