Related
Hi, I have a problem with my HD2. After having my phone for a few weeks it developed a mark underneath the LCD screen right down the middle. It didn't affect the touch screen, but was clearly visible. I informed HTC, they took the phone and replaced the LCD. Now, after having it back for for about 2 weeks the same has happened again (a mark underneath the screen, right in the middle about the size of a penny wide). I'm wondering if any one else has had this problem and whether it is my fault. I keep the phone in the back pocket of my jeans, and therefore put some weight on it on occasion. I'm not overly fat (12 stone) and have always kept all my phones in my back pocket. What do you guys think ? thanks
tobycgraham said:
Hi, I have a problem with my HD2. After having my phone for a few weeks it developed a mark underneath the LCD screen right down the middle. It didn't affect the touch screen, but was clearly visible. I informed HTC, they took the phone and replaced the LCD. Now, after having it back for for about 2 weeks the same has happened again (a mark underneath the screen, right in the middle about the size of a penny wide). I'm wondering if any one else has had this problem and whether it is my fault. I keep the phone in the back pocket of my jeans, and therefore put some weight on it on occasion. I'm not overly fat (12 stone) and have always kept all my phones in my back pocket. What do you guys think ? thanks
Click to expand...
Click to collapse
Kind of like an oily mark? There are several threads about it, some people find using a suction cup to suck the screen a little helps. Have a dig through the forum. (personally id send it back, if it happens AGAIN then id start looking at how i was carrying it around, for example, tight jeans pocket, , , , , )
EDIT - just reread the bit about back pocket,, ,there's your culprit!
Hello
There is no way you should be sitting down with the phone in your back pocket or even leaning on it ... the screen wasnt meant for that type of pressure
thanks for the reply, i've gone through the other threads.. Looks like another htc repair job. Having my phone in my back pocket is just much more comfortable (and doesnt affect the shape of your jeans/trousers) than having it in my front pocket. Oh well.. wont do it again after this.
You keep the phone in your back pocket...I think there's your answer! The screen is waay big on this phone as you know, you should keep it else where.
Same happened to me - got it replaced under warranty,
My MyTouch 3G Slide has a couple defects. The bezel or plastic housing that surrounds the upper portion of the device surrounding the screen has gaps in it around the seam that allows dust or any small particulate to enter under the screen. I have looked at several of the devices and they all have it to one degree or another. For instance, on my Slide I have 3 of these holes one of which has allowed a grain of sand under my screen. My wife's Slide has 4 of these holes or gaps and they are substantial on her phone. One XDA member has had this happen in the same spot that both my wife and my Slides are collecting dust.
While the light leaks or gaps in the bezel are a problem (for me) I think the real problem lies in the adhesive strip that connects the digitizer to the LCD screen. The way the digitizer is adhered to the LCD there shouldn't be any way for dust to have gotten in between the two pieces of hardware. I'd like to believe that it was just my particular phone but my wife's phone is having the exact same issue.
The phone really is phenomenal and I'm sure it was just a fluke that I've had issues (hoping so). Just keep an eye out for any issues similar to what I've mentioned above. I have really gone back and forth with this and I am definitely disappointed with having an issue(s) right out of the gate. My wife really likes the phone and after giving it some thought I like it as well ... a lot. I will return and reorder another couple Slides because this device is that awesome. Thanks for your thoughts/contributions to the thread.
I've tried to get some photos of the gaps but they are small and hard to photograph. To inspect your device: Go into a dark area and pull up your contacts, messaging app or a white web page in the browser with full screen brightness and inspect the seam of the plastic housing surrounding the touch screen on the top half of the slide. The gaps are almost like rectangular notches just below/above the corners of the screen in the seam. My theory is that these are artifacts from the plastic molding process that were exacerbated by poor/hasty assembly. I am definitely returning my Slides.
Its all true. After reading, and seeing the image posted by another member here, I checked my phone. I went into a dark room, opened up a site that has pretty much a white page, and I too noticed a gap at the bottom right hand corner of my screen. As of right now no dust/dirt has shown up under my screen, but what's to say that it won't later on. Heck, screw dirt. What if moisture finds its way in, and starts to fog up the screen from within? This could be a major problem later on down the road.
whew... just checked mine, noticed nothing like that, thank goodness.
[email protected] said:
whew... just checked mine, noticed nothing like that, thank goodness.
Click to expand...
Click to collapse
Strange, I've confirmed with everyone I know with a Slide (only black and white thus far) and everyone is seeing the same thing. What color Slide did you get? I wonder if the red Slide is manufactured differently? Anyway, that is awesome because I think the phone is GREAT other than the small gaps in the bezel.
I will say I took some compressed air and attempted to move the artifact under my screen just to see if air was moving through those gaps. The grain of sand or whatever it is did not budge. I'm just not sure what to think. I hate the idea of returning this phone ...
Mine is like that. Not that i care much as im returning it soon. But it does have gaps and light leakage all over the bottom of the screen, near the buttons.
i just check my and maybe i cant see it but i havent found anything... i have a red one
Re: My MT3G Slides (and others) Have A Defective Touch Screen Bezel
Initialy checked mine as well, black. I don't appear to have this problem either.
I will inspect further to verify.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
The only one I have is at the very bottom of the buttons, which might even just be the light hitting the glass at a specific angle. Other than that, no light leaks/cracks/blocks/whatever you call them on my screen area. Red Espresso.
I just swapped my white MTS for a Black one with no signs of cracks or light showing threw. TMO rep did not know of this problem and said he would send out an e-mail to other reps to let them know.
My day is now ruined
Yep, both bottom sides, right at the corners, above the buttons. I will not return it though, think instead a lil duct tape and some JB weld will do (seriously, a little touch of black silicon for a good seal, still sucks though). Screen cover seems to be blocking any dirt at the moment.
woow good looking out.. i was wondering how a spec of dust got to my screen. im planning on putting a piece of scotch tape over those regions (i have a red slide btw).
I have a red one and didn't see any leaks bottom or top. Thank goodness!
mtjnkee said:
seriously, a little touch of black silicon for a good seal
Click to expand...
Click to collapse
I hear you; I've been trying to find a way to keep the bezel sealed until I can get a case/cover for the phone. I literally have one tiny grain of sand at the bottom left hand corner of my screen. I so don't want to return the phone; I'm in love with the thing.
Glad to hear some of you have a better seal on the bezel.
I have some small light leak on the bottom, not an issue yet and I'm still within my 14 days so I might stop by the t mobile store tomorrow and try to get a replacement.
1. slight curved gaps at the corner edge where the top of the plastic curves down to turn into the sides. check
2. vertical rectangular light leak above home and genius keys. check
3. these lights only light up when hard keys are lit..when screen first lights up...light leaks are not there...once keys light up, light in the gaps light up. doesnt this mean the screen is sealed and there is no leak from the screen itself?
4. however, if you have a creaky top plastic housing, the seam running along the edge of the white plastic and grey plastic is not flush...on my 1st slide, i could see the screen light up in these 'cracks' of the seam...could debris get into screen this way then?
5. for those with debris already at lower left part of screen: pls do me a favor:
hold phone (sideways with back cover facing the ground) at just below eye level and try to see that left corner that is underneath the painted black surround of the screen..do you see white light when the screen is lit? if you look along the 'inside' edges along the rest of the phone, you will see that there should not be white light emitting out and should have a 'clean' look...there should basically be a solid black border...perhaps, if you guys have this white lighting show through, that could mean a separation of the screen somehow? btw, you do not have to be in a dark room to see this light along the inside edge....it is very noticable as the light comes thru where i think there should be no light. ps: when looking at the phone screen normally (ie from top down), screen looks perfect and this issue doesnt affect actual picture on screen.
my first slide had the light leaks but i didnt think anything of them as i thought they were related to the buttons only...but the issue i had spoke of in #5 above, i had this light coming thru along the whole edge of the bottom of the screen plus creaky top plastic housing.
I have dust under the entire screen of 2 Slides (Espresso), I couldn't notice it indoors but it is glaringly apparent when in the sun. The phones go back tomorrow. I've had my G1 for a year and a half with not a single spec of dust under the screen. I've had 2 MT3G Slides (Espresso) for 6 days and dust is under both screens; these devices are very cheaply made. Phone is lightning fast, screen size is great, physical keyboard is great, UI has some excellent features you can find nowhere else ... too bad I won't be keeping them. Been nice knowing you guys.
Seriously everyone be lucky that this is the only problem that people are having with this phone. You want to talk about shoddy build quality on first run devices, lets not even mention what the original PSP was like. If all that's wrong is that a few people have a bad bezel, then I'd say you made out well with the phone. NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
xenoletum said:
NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
Click to expand...
Click to collapse
Well I have to send them back as I ordered them online. 2 phones plus about 5 other people I know with these phones have dust blowing in under the defective bezel. It's unacceptable. Like I care about a PSP. What the hell does a PSP have to do with this? You didn't even comment on your phone having the light leaks/gaps or not. What is your point? You think folks should settle for inferior builds of an expensive phone? You can ignore whatever you'd like. I will wait for a better phone.
Wanted to add to my previous post about mine not having the leak... I have the red one.
Hello all,
I've got a week old Desire Z and the only thing thats bothering me is a few bits of dust in various corners of the screen, tiny bits not too large, other than this the phones perfect. I'm contemplating returning the device, however I'm worried the next one maybe worse off, and eventually dust is going to get under the screen it being a HTC, my previous Nexus One had the problem so did 3 other friends and a Desire, all which use similar sealing mechanisms.
Do any of you chaps suffer from the same problem?
Regards,
Akshay
I haven't noticed any dust in mine -- but I did in one of my previous phones.
As long as its not a big flake of dust right in the middle, I wouldn't sweat it. Like you said, the next one could be worse (unless you can go into a store and they'll let you open boxes and look)
Mine came with what appears to be a very slight scratch bottom right, but when the phone's on you cant see it at all
I have one on my screen too. It's not small, it's on the edge of the screen, right on top, below the HTC logo. When I pick up the phone, it's not visible much, but when you look at the phone lying on your desk then I see it and it bugs me.
I was hoping there is a way to get rid of it. Like turn the phone upside down and switch on vibration, or shake the phone. Any ideas?
schriss said:
I have one on my screen too. It's not small, it's on the edge of the screen, right on top, below the HTC logo. When I pick up the phone, it's not visible much, but when you look at the phone lying on your desk then I see it and it bugs me.
I was hoping there is a way to get rid of it. Like turn the phone upside down and switch on vibration, or shake the phone. Any ideas?
Click to expand...
Click to collapse
Anything in there is probably sandwiched in pretty good. Some things to consider trying are giving the phone some hard taps on the edge, to try to dislodge the dust and move it to a non-visible area (this could also shatter your screen or dislodge some important component) or maybe try dissembling the phone till you can get to the edge of the screen and try some high-pressure air...
aksd said:
Hello all,
I've got a week old Desire Z and the only thing thats bothering me is a few bits of dust in various corners of the screen, tiny bits not too large, other than this the phones perfect. I'm contemplating returning the device, however I'm worried the next one maybe worse off, and eventually dust is going to get under the screen it being a HTC, my previous Nexus One had the problem so did 3 other friends and a Desire, all which use similar sealing mechanisms.
Click to expand...
Click to collapse
I got dust in the bottom left hand corner of my screen. I went to sleep with a clear screen and woke up with a good portion of the corner pretty well dusted, about the diameter of a dime.
I sent it in for a warranty replacement, and it hasn't happened again with the new one in 5 months.
I'm done with HTC phones for now. Two of my last high end HTC phones had either dust or stuck/bad pixels and while materials seemed high quality, build quality was really poor. That dust was not there when I bought it, it must have made it in there, this should never be allowed to happen.
Hi all,
Got my UK TF101 today and loving it.
However the finish is not that good. The small plastic strip between the glass and the bronze edge of the casing has remnants of the glue used during the assembly and it won't come off. Looks like it has been rush assembled and makes it look tatty. Would be a shame to return it just for that but when you spend this money and see what finish iPads have you really want it to be mint.
Does any one else have this problem on their TF101?
Unless they have changed the manufacturing process for newer devices, there's no glue anywhere near the casing/bezel.
I have some glue on the top of the black strip on the top-left (when holding the tablet in landscape mode). I only noticed it when I had my desk lamp shining on it. It wasn't present on the other TF I had at the moment. Doesn't really bother me that much.
Yeah, mine arrived today and has the same thing. The rubber's not quite flush with the screen and its mount, but it really doesn't matter.
Overall very impressed with the device so far. I certainly won't be sending it back over that small defect. We live in an imperfect world..!
Yup. But eventually after some use it wore off.
Mine just arrived today I can see some remnants of what appears to be glue both bottom & left side. Also it appears that the 1/2 section on the rubber on the right side has been rubbed down.
Quite agree it won't affect the use of the device but when you see how sharp a finish the iPad has it is a shame to not be perfect on the TF101.
I called Comet and they were happy to do a swap. When I popped in to the local store the Customer Service Desk chap admitted I was the third person with this problem. He got another one from stock and it was better but still a bit of dried glue. He offered an exchange or 10% refund. I decided to go with the 10% refund so got £43 back. I can now live with the problem.
If others want to see what we are on about here is a pic of my bezel. Right hand side is as I would expect but the top strip is very messy and slightly raised compared to the flush fitting section.
aerotec said:
If others want to see what we are on about here is a pic of my bezel. Right hand side is as I would expect but the top strip is very messy and slightly raised compared to the flush fitting section.
Click to expand...
Click to collapse
Thx for the pic, it's good to see what you were describing. I've looked really closely at my device and I still cant see any glue on mine. It looks like the manufacturing process has changed since they started production, not for the better in this case it seems. That certainly is a fair amount of money off though.
Had glue on mine too, I thought it had been refurbed and returned it for another unit. This one was checked in store and appears perfect.
Does your S5 battery door creak/squeak when you put pressure in certain areas?
I have one that does creak/squeak when you put pressure where the Samsung logo is (under the auto focus), and another S5 that doesnt.
Does yours?
Put a good amount of pressure - is this normal?
Is your snapped on properly?
Sent from my SM-G900P using Tapatalk
Nope, mine doesn't make any noise at all when I put pressure on it. Like eyecon said above, you sure it's on securely? If so, perhaps there's a defect with your back cover. But yeah, that's definitely not normal behavior.
Ya if it squeaks, I'd get it exchanged since it may not be closing and snapping in properly, thus negative the water resistant seal
Sent from my SM-G900P using Tapatalk
no issues here, my battery door is strongly in place. But i do have some doubt about the rubber gasket in the back, if you guys want to take a look at my thread and post your findings it would be greatly appreciated
http://forum.xda-developers.com/showthread.php?t=2716219
U should get it exchanged with warranty.This should not happen.
Sent From HTC One Android Revolution 62.0 KitKat 4.4.2. Sixth Sense
BrandonPrice31 said:
Does your S5 battery door creak/squeak when you put pressure in certain areas?
I have one that does creak/squeak when you put pressure where the Samsung logo is (under the auto focus), and another S5 that doesnt.
Does yours?
Put a good amount of pressure - is this normal?
Click to expand...
Click to collapse
Mine does. I went to the store and asked for another to check on it and it did the same thing in the same location (in the middle of the power button side). I switched two covers on two phones and all combinations were with the exact same problem. Guess a bad batch or who knows what. It's driving me crazy . I'm waiting for my UAG case which I guess will cover up the issue.
Mine does. And it irritates me like anything. Going to the store to get it replaced.
Anyone else with this problem?
Sensamic said:
Anyone else with this problem?
Click to expand...
Click to collapse
If you have it go to your store and change it.
I have try that in the store and my was fine, but try it on the spot, so you don't have to go back again
I have the same problem and the Samsung support mean to me, I must send my phone to the Samsung repair. They are crazy, I don't like to send the complete phone to change 1 back cover, next week I wend to the provider where I bought the phone and then I see, maybe they'll change the cover
Yup, have that too but it doesn`t bother me a bit. I use a flipcase or s-view case anyway.
My wireless charging back cover creaks like mad. Worse place are just below the power button and above the camera lens.
Sent from my SM-G900F using Tapatalk
A phone that creaks bothers me a lot.
Today I started to notice this on my s5. It's mostly on the right side, but it can squeak a little if pressed in the middle. It's not something that is very audible but what worries me is if waterproofing is compromised or not.
Also, it's fully snapped on and o checked that multiple times
EDIT : Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not. Is it normal for water to enter there? Or is there a problem in the case?
Also, in most all of the inserts the cover clicks when i put it back on, except on that right side that i mentioned. Funny enough, the water leak on the heart rate sensor is on the left side of it.
griffin_1 said:
Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not.
Click to expand...
Click to collapse
Anyone can tell me if this is "normal" or if i should take it to warranty? Is a back case even covered under warranty?
griffin_1 said:
Today I started to notice this on my s5. It's mostly on the right side, but it can squeak a little if pressed in the middle. It's not something that is very audible but what worries me is if waterproofing is compromised or not.
Also, it's fully snapped on and o checked that multiple times
EDIT : Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not. Is it normal for water to enter there? Or is there a problem in the case?
Also, in most all of the inserts the cover clicks when i put it back on, except on that right side that i mentioned. Funny enough, the water leak on the heart rate sensor is on the left side of it.
Click to expand...
Click to collapse
Mine creaks on the right side as well, and I made sure the case is fully snapped all around. And just like yours, in most all of the inserts the cover clicks when i put it back on, except on that right side. Its annoying at times, but I learned to ignore it most of the time. I wnot bother exchanging or returning. Had the phone for couple months now.
crazyalee said:
Mine creaks on the right side as well, and I made sure the case is fully snapped all around. And just like yours, in most all of the inserts the cover clicks when i put it back on, except on that right side. Its annoying at times, but I learned to ignore it most of the time. I wnot bother exchanging or returning. Had the phone for couple months now.
Click to expand...
Click to collapse
Its something that only a few people seem to experience because i haven't found many reports of it, only a few. Probably some batches of phones with a production problem or not so good quality control, i don't know =/ But i do know that all the clips are snapped on or at least look like it.
I actually contacted Samsung about it but got the generic and expected reply to take it to a repair center to analyse the phone - which i didn't. My main concern would be any problems with waterproofing, but i just putted on a case and don't think much about it now actually.