Friends,
I am in need of working (both sims and without Airplane mode error) stock rom back up file for my ZUK Z1 mobile.
If any of you found it anywhere of if you have the handset, please arrange to send me the link to download (better
if it is google docs link)
Related
Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.
Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse
reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected
Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?
Flashing your compatible Xperia Z3 device
DOWNLOAD LINK : MOD EDIT by @gregbradley Self advertising is not allowed. Especially when it is just a copy and paste from another site
There are 2 variants of Xperia Z3 that can be flashed with Android N Developer Preview, D6603 and D6653. Here’s how to get started:
Connect your compatible Z3 device to a computer with a USB cable.
Xperia Companion will open automatically
Make sure you have Xperia Companion version 1.1.24 or later. If not, download the latest version from here.
Hold down the ALT key on your computer and click on Software repair on the home screen, then follow the guide.
You’ll be asked to disconnect and turn off your device, then to reconnect whilst holding down the volume down key to start the software flashing.
You can return to factory settings at any time by connecting back to Xperia Companion and following the Software repair
Thread closed
This is a direct copy and paste from here
I solved the problem by manually let the FlashTool sync the devices databases from Github
1 - Connect to the internet
2- From FlashTool > Devices > Device Sync > Manual Sync
3- after it's done syncing close FlashTool and open it again..
4- it should say loaded ninety something devices (in my case 94)
5- choose flash > flashmode and choose a folder that contains any correct FTF (not corrupted FTF file) whatever the names of the files are..
you should now have your device(s) listed in the Firmwares box with the FTF files after expanding the device name..
if this method doesn't work for you simply install an older version of FlashTool
here is a link of Ver 0.9.18.6 for windows
https://www.androidfilehost.com/?fid=24562946973630873
Have a good flashing
thanks........it works
After hard reset mobile not working only showing sony logo. Connect to pc by flash tool its not showing any device connect.
Sumaiya basha said:
After hard reset mobile not working only showing sony logo. Connect to pc by flash tool its not showing any device connect.
Click to expand...
Click to collapse
Had the same problem with my Xperia T (LT30P). Just disconnect the battery and hold power and volume up for a few seconds (dunno if it does something, just repeating what i've read somewhere). After that it should connect to your pc just fine so you can flash another kernel and/or ROM.
Please delete this.
firmware detected but it is not able to flash as the drop down is not coming after pressing sony firmware
Click on very left arrow not in content..... Working 100%......click untill the end of the arrow
View attachment flashtool_2020-08-05_05-13-41.logflashtool is not flashing my xperia z3 it just stays in connect your device and says connected with usb debbugin of 2011 devices make sure mtp is off help asap
Didn't work in my case, tried on Flashtool v0.9.34 for windows and linux and v0.9.28 for windows, it refused to read the Xperia SO-02K firmware which I needed to flash for DRM keys backup.
Flashtool v0.9.18.6 and v0.9.15 for windows were both able to read it, but threw "root : this bundle is not valid" and "Cannot open bundle. Flash operation canceled" errors during flashing. I tried four different versions of the firmware and ultimately used newflasher v20 instead.
Greetings guys!
I've flashed stock rom (6.0) in my phone using SP flash tool with the setting "format all and download" and now I've lost my imei number and even in mtk engineering mode the CDS information is not present under the connectivity tab.
I thought that the problem was with the stock rom and so I flashed MIUI 9 rom by macBlaze. But still I can't get my imei number and there is no CDS information in the mtk engineering mode.
I'm really stuck here.
Any help would be greatly appreciated!!
Thank you
Screenshots:
https://drive.google.com/file/d/1sBNh3FnzkMq0cPUGfb2h3gZd_Jbyl26Q/view?usp=drivesdk
https://drive.google.com/file/d/18mYUN1PpplxPfyiFdGFRn37KAo7CvaWJ/view?usp=drivesdk
same thing is happened to me too
plz somebody help !!!!!!!!!
Maui Meta
try sp maui meta tool it will be able to fix your imei problem.
What is the main reason why imei is important in custom roms?
edarick said:
What is the main reason why imei is important in custom roms?
Click to expand...
Click to collapse
Imei controls the communication side of things,
Without it the device will not even acknowledge a sim card,
I've flashed stock rom in my karbon k9 smart 4g phone using SP flash tool with the setting "format all and download" and now I've lost my imei number and even in mtk engineering mode the CDS information is not present under the connectivity tab. i tried my downloading cds.apk aslo but mobile not allowing to install
I tried sn write tool also. but my windows 8 does not detecting my mobile using usb cable. please help me
Same Issue with My LAVA Iris 88s
I've flashed stock rom in my Lava Iris 88s smart 4g phone using SP flash tool with the setting "format all and download" and now I've lost my IMEI number and even in mtk engineering mode the CDS information is not present under the connectivity tab. I tried my downloading cds.apk, aslo but mobile not allowing to install. I am not able to root my mobile.
I tried SN write tool also. but my windows 8 does not detecting my mobile using usb cable. please help me
Hi Guys,
I'm trying restore my Mi 6 for loss baseband, wifi and IMEI. But i discover some files with call name "ENG Firmware", name by Xiaomi Files for recover devices (ex: the Huawei uses the name Board Software).
So, i found the files for the Mi 6 (Fastboot ROM). After pass by XiaoMIFlash, the devices entries in DIAG Mode in first boot and stay in "rooted mode" (prints attached).
The one of solutions'll be some user share the files (modemst1 and modemst2) for restore by fastboot (but this mode needs unlock bootloader and rooted device, i thing...
But, i've a problem: In DIAG Mode, the device stays connect and disconnect dynamically. I was happy because a tunnel end's light. When i applied the QCN file, not loading in application. Results: not solved "yet".
If someone have the same problem here, i can share the file without problems, since help me...
I finded the files for another Xiaomi platforms, but this files is very very very secret, classified, and VERY HARD to found in Internet, included the Mi 6 (Sagit).
Sorry again for my bad english, appreciate any helps...
darks0ldier