[HELP]recovery bootloop after flash via odin(sm-g930v) - Verizon Samsung Galaxy S7 Questions & Answers

I got this phone a few week. After flash to nougat, my phone continue to recovery booting but did again. Recovery booting to erasing but did again so my phone recovery bootloop. Any with the same issues? What the solution of these problem?

vybercayer said:
I got this phone a few week. After flash to nougat, my phone continue to recovery booting but did again. Recovery booting to erasing but did again so my phone recovery bootloop. Any with the same issues? What the solution of these problem?
Click to expand...
Click to collapse
What did you flash to nougat with? What package?

gunz.jones said:
What did you flash to nougat with? What package?
Click to expand...
Click to collapse
I'm flash with stock firmware

vybercayer said:
I'm flash with stock firmware
Click to expand...
Click to collapse
That doesn't answer the question. Which stock firmware package are you flashing? Is it for the v, a, t? Where did you get the package?

gunz.jones said:
That doesn't answer the question. Which stock firmware package are you flashing? Is it for the v, a, t? Where did you get the package?
Click to expand...
Click to collapse
Hehe.. Sm-g930v from Sammobile

vybercayer said:
Hehe.. Sm-g930v from Sammobile
Click to expand...
Click to collapse
Go into recovery and clear cache and data if you haven't. If you have, flash all 4 files through odin again, including csc.

gunz.jones said:
Go into recovery and clear cache and data if you haven't. If you have, flash all 4 files through odin again, including csc.
Click to expand...
Click to collapse
Already, i did again for 4 times and same..

vybercayer said:
Already, i did again for 4 times and same..
Click to expand...
Click to collapse
I would check updato.com and redownload the latest nougat package

gunz.jones said:
I would check updato.com and redownload the latest nougat package
Click to expand...
Click to collapse
When i'm trying to flash v6.0.1 it's work but stuck at initialization and restart again and did again

Just fyi i already tried flash QF2,qf3,pi3,pe3 from g930u and g930v and still nothing.. have you a backup mm stock?

vybercayer said:
Just fyi i already tried flash QF2,qf3,pi3,pe3 from g930u and g930v and still nothing.. have you a backup mm stock?
Click to expand...
Click to collapse
No, I don't have a backup. I just load the firmware through Odin that I got from updato. I've never had any issues. What version of Odin are you using?

gunz.jones said:
No, I don't have a backup. I just load the firmware through Odin that I got from updato. I've never had any issues. What version of Odin are you using?
Click to expand...
Click to collapse
The latest version 3.12.3 and 3.12.7

vybercayer said:
The latest version 3.12.3 and 3.12.7
Click to expand...
Click to collapse
Tried Prince comsy?

gunz.jones said:
Tried Prince comsy?
Click to expand...
Click to collapse
Already but still nothing

vybercayer said:
Already but still nothing
Click to expand...
Click to collapse
Which csc file are you loading?

gunz.jones said:
Which csc file are you loading?
Click to expand...
Click to collapse
Csc regular not home csc

I'm tried first firmware but when flashing it fail
Fused 4 > binary 2
Emmc write fail: aboot
Solution pls...

You mentioned a few posts back that you were flashing the MM firmwares after flashing the Nougat update. You can't do this because for some strange reason, Samsung change the bootloader as a part of the update that doesn't allow MM firmwares to be flashed. I would know because after the Nougat update, I found Stang5Litre and really wanted to try it but it would fail every time.

vybercayer said:
I'm tried first firmware but when flashing it fail
Fused 4 > binary 2
Emmc write fail: aboot
Solution pls...
Click to expand...
Click to collapse
Either a cable issue, port issue, or your phone is borked. Flashing.to.stock with a csc, it should be like starting fresh and run with no issue

gunz.jones said:
Either a cable issue, port issue, or your phone is borked. Flashing.to.stock with a csc, it should be like starting fresh and run with no issue
Click to expand...
Click to collapse
Still same.. bootloop when loading 'please wait' and then restart again..

Related

Please help stock on Samsung boot logo

please help, I checked Nand Erase All option (stupid of me) in Odin and flashed a stock firmware and now my phone is stuck on Samsung logo.
samanbabah said:
please help, I checked Nand Erase All option (stupid of me) in Odin and flashed a stock firmware and now my phone is stock on Samsung logo.
Click to expand...
Click to collapse
do you mean you are stuck on logo
jaythenut said:
do you mean you are stuck on logo
Click to expand...
Click to collapse
yes I am stuck on logo. I think I have soft bricked my phone and now I am desperately looking for a PIT file for my phone but still no luck
samanbabah said:
yes I am stuck on logo. I think I have soft bricked my phone and now I am desperately looking for a PIT file for my phone but still no luck
Click to expand...
Click to collapse
Have you flashed the right firmware you cannot downgrade it must be the same or newer for it to work, you can get the latest updates from www.sammobile.com
jaythenut said:
Have you flashed the right firmware you cannot downgrade it must be the same or newer for it to work, you can get the latest updates from www.sammobile.com
Click to expand...
Click to collapse
yes I have flashed the latest firmware. I am pretty sure.
samanbabah said:
yes I have flashed the latest firmware. I am pretty sure.
Click to expand...
Click to collapse
try this pull the battery out and back in put into download mode flash again with odin ,untick f-reset and reboot
with odin 3.07
jaythenut said:
try this pull the battery out and back in put into download mode flash again with odin ,untick f-reset and reboot
with odin 3.07
Click to expand...
Click to collapse
I followed your instructions but it still gets stuck on the logo
I have done everything I could. I also tried to install CWM but it gives me this error "secure check fail : recovery"
okay for those with the same problem as mine, I finally managed to fix this problem by going to recovery, then wiping data factory reset.
i've the same error,
it was because i use bobcat v2 with abyss kernel so after i would use echoe V5 but reflash a stock rom MJ7 to clean my phone
but ===> error the message just apear
I fixe the problem with a flash stock kernel ^^

[Q] ClockWorkMod is not working

Hi,
I have Note 3 - SM-N900. with ROM SER [Russia].
After flashing the ClockWork, It's not working, see the attachment! I can't choose ZIP file.
Reflash it, that looks like the stock recovery. Make sure you flash the correct one for your device.
Sent from my SM-N9005 beast of a phone.
Sammath said:
Reflash it, that looks like the stock recovery. Make sure you flash the correct one for your device.
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Did it, no success. I have 4.4.2, just flashed the Kitkat version of the ClockWork, just the same.
asus_boy said:
Did it, no success. I have 4.4.2, just flashed the Kitkat version of the ClockWork, just the same.
Click to expand...
Click to collapse
Does odin shows 'pass' message?. After successful cwm flash, you phone will reboot and automatically enter cwm. Then after some times it will attempt to reboot to OS. If it ask to flash stock recovery then choose no
asus_boy said:
Hi,
I have Note 3 - SM-N900. with ROM SER [Russia].
After flashing the ClockWork, It's not working, see the attachment! I can't choose ZIP file.
Click to expand...
Click to collapse
Extract the attached .zip and flash the extracted file "recovery.tar.md5" using Odin.
Rosli59564 said:
Does odin shows 'pass' message?. After successful cwm flash, you phone will reboot and automatically enter cwm. Then after some times it will attempt to reboot to OS. If it ask to flash stock recovery then choose no
Click to expand...
Click to collapse
Yes, the PASS message showed. and then rebooted.
Extract the attached .zip and flash the extracted file "recovery.tar.md5" using Odin.
Click to expand...
Click to collapse
Okay, going to do it.
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
asus_boy said:
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
Click to expand...
Click to collapse
Strange, try a factory reset and re-flashing the ROM again, there has been a issue of CWM n TWRP not working after flashing on ND1 "I personally faced it" but the file I provided should have worked without any probs , anyways try a reset...
RuchRha said:
Strange, try a factory reset and re-flashing the ROM again, there has been a issue of CWM n TWRP not working after flashing on ND1 "I personally faced it" but the file I provided should have worked without any probs , anyways try a reset...
Click to expand...
Click to collapse
My build number is DND1, I think the problem is that. actually I don't want to reset it. It's working fine now. maybe later
Make sure reactivation lock is OFF
Sent from my leanKernel 2.5.1 powered stock 4.4.2 (NE6) SM-N900T
asus_boy said:
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
Click to expand...
Click to collapse
Sry if u did it already, but did u activate dev mode and check USB debugging in settings?
4aces said:
Sry if u did it already, but did u activate dev mode and check USB debugging in settings?
Click to expand...
Click to collapse
No, the USB debugging wasn't enable, just did it now, going to try it.

Custom roms not working on my device! (J500FN)

I've been trying to install custom roms for my device, but none works for my, i've been trying on stock 5.1.1 but the rooms get stuck on boot loop and on stock 6.0.1 i get a green yellow faiding screen. I don't know why it happens, the device is rooted with supersu.
Do you wipe system, data, cache, dalvik cache before installing the rom?
Telepracity said:
Do you wipe system, data, cache, dalvik cache before installing the rom?
Click to expand...
Click to collapse
Yes! And it still dosen't work.
cyprian99 said:
Yes! And it still dosen't work.
Click to expand...
Click to collapse
What TWRP are you using?
Telepracity said:
What TWRP are you using?
Click to expand...
Click to collapse
I'm using TWRP 3.0.2.0
Download latest lolipop firmware select file in odin at ap go to odin options select phone bootloader update click start
SoUnd001 said:
Download latest lolipop firmware select file in odin at ap go to odin options select phone bootloader update click start
Click to expand...
Click to collapse
Download the lattest firmware from Samsung Firmware page?
cyprian99 said:
Download the lattest firmware from Samsung Firmware page?
Click to expand...
Click to collapse
Yeap or you can use updato has unlimited download speed
SoUnd001 said:
Yeap or you can use updato has unlimited download speed
Click to expand...
Click to collapse
THANKS!! Working perfectly now!

Nand write start, stops there...

Stock G-935W8 on Nougat, (NRD90M.G935W8VLU2BQB6) trying to get TRWP installed via Odin. I've tried different cables, different USB ports and 5 different versions of Odin. 3.11.1, 3.11.2, 3.12.3, 3.12.5 and 3.12.7
Everytime it stops at nand write start!! But will not go any further.
Any assistance?
k.s.deviate said:
Stock G-935W8 on Nougat, (NRD90M.G935W8VLU2BQB6) trying to get TRWP installed via Odin. I've tried different cables, different USB ports and 5 different versions of Odin. 3.11.1, 3.11.2, 3.12.3, 3.12.5 and 3.12.7
Everytime it stops at nand write start!! But will not go any further.
Any assistance?
Click to expand...
Click to collapse
What twrp are you using?
mashardpro said:
What twrp are you using?
Click to expand...
Click to collapse
Newest, 3.1.0-1
k.s.deviate said:
Newest, 3.1.0-1
Click to expand...
Click to collapse
I mean for flat or edge. (I'm sure you already know and download the correct file)
mashardpro said:
I mean for flat or edge. (I'm sure you already know and download the correct file)
Click to expand...
Click to collapse
Edge, by hero2lte
k.s.deviate said:
Edge, by hero2lte
Click to expand...
Click to collapse
Hmmm, I downloaded 3.024 img.tar. I have not tried the last version
the newest one has some problems on the 7 edge, if you get to flash successfully, you will encouter a red screen. This is a known problem and is being worked on.
For now I suggest you stay with 3.0.2.4
Cosmic Blue said:
the newest one has some problems on the 7 edge, if you get to flash successfully, you will encouter a red screen. This is a known problem and is being worked on.
For now I suggest you stay with 3.0.2.4
Click to expand...
Click to collapse
thank you, i was successful with TWRP 3.1.0-0
now i want to install superman rom, being that i have the W8 variant would i just stay on the most recent bootloader and radio for my variant? or do i flash the files stated in the roms OP?
k.s.deviate said:
thank you, i was successful with TWRP 3.1.0-0
now i want to install superman rom, being that i have the W8 variant would i just stay on the most recent bootloader and radio for my variant? or do i flash the files stated in the roms OP?
Click to expand...
Click to collapse
Flash bl and cp from op. or if not mistaken, rom include bl and cp in the aroma installer

Need A little Help Please

ok so my kid was using my rooted (TWRP) TM350N and
had some problems playing a game. one of his friends
suggested a factory reset which he did and now all it
does it boot the the TWRP menu.
i downloaded and installed (using TWRP) the
JazzROM-SM-T350_7.1.1_v2.01.zip and it seemed
to install with no errors however it will still only
boot to the TWRP menu and i'm lost
any ideas ?
additionally holding down power-volume up-home or power-volume down-home
does nothing, it still boots to the TWRP menu every time.
hopefully it's not ruined
ParishM said:
additionally holding down power-volume up-home or power-volume down-home
does nothing, it still boots to the TWRP menu every time.
hopefully it's not ruined
Click to expand...
Click to collapse
From the TWRP menu, can you choose reboot and then download to get to where you can use Odin to flash a stock ROM?
lewmur said:
From the TWRP menu, can you choose reboot and then download to get to where you can use Odin to flash a stock ROM?
Click to expand...
Click to collapse
you mean use the "download" button in TWRP and connect
to Odin ?
ParishM said:
you mean use the "download" button in TWRP and connect
to Odin ?
Click to expand...
Click to collapse
Exactly.
didn't know you could do that, thanks !
i've searched XDA several times and can't find the stock marshmallow rom,
any idea where i can find it ?
lewmur said:
Exactly.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T350/
edit: You might as well upgrade to nougat at the same time. Because your son reset the tablet, you are going to have to re-install everything anyway.
lewmur said:
https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T350/
edit: You might as well upgrade to nougat at the same time. Because your son reset the tablet, you are going to have to re-install everything anyway.
Click to expand...
Click to collapse
ok i downloaded the firmware from sammobile, but it is a zip file and from what i
remember Odin needs a .tar or .md5 to flash ?
ParishM said:
ok i downloaded the firmware from sammobile, but it is a zip file and from what i
remember Odin needs a .tar or .md5 to flash ?
Click to expand...
Click to collapse
With the latest Odin, you need to extract the files from the zip and flash each of them. I'd try first with just the AP and BL files.
ParishM said:
ok i downloaded the firmware from sammobile, but it is a zip file and from what i
remember Odin needs a .tar or .md5 to flash ?
Click to expand...
Click to collapse
just extract the file to your pc. the md5 file is inside it.
elmo37 said:
just extract the file to your pc. the md5 file is inside it.
Click to expand...
Click to collapse
i'll have to download it again, it won't unzip. maybe it got
corrupted during the slow download ?
I have sm-t350 us variant upgraded to 7.1.1 is twrp possible ? New to this device
yes i have TWRP on mine
ParishM said:
yes i have TWRP on mine
Click to expand...
Click to collapse
Can u send link plz sir I'm new to Samsung been doing Motorola development for years I believe I will be able great help to community once I get situated with correct files
joeeboogz said:
I have sm-t350 us variant upgraded to 7.1.1 is twrp possible ? New to this device
Click to expand...
Click to collapse
joeeboogz said:
Can u send link plz sir I'm new to Samsung been doing Motorola development for years I believe I will be able great help to community once I get situated with correct files
Click to expand...
Click to collapse
https://twrp.me
Don't see sm-t350 am I using a different version ?
the newest version is 3.1.1 it works with any android
ParishM said:
the newest version is 3.1.1 it works with any android
Click to expand...
Click to collapse
How's that possible I have Moto g4 plus and 5 plus those g4 won't work on g5
well i was finally able to flash a new firmware using odin and
the twrp download mode. i chose the newest 7.1.1 nougat and
it worked perfectly. i really like some of the new 7.1 features.
thanks again for all the help, you guys are the best !

Categories

Resources