Related
ok, i dont have any problems anymore.... a couple of days ago the touch screen on my uni stopped working. i would just like to tell people what i have done to solve this, although most of you already know etc etc ... always usefull. theres a little screw to the left hand side of the screen when it is turned. when removed with metal plate will come off and you will be able to see the flex cable. i had to adjust mine slightly as a friend of mine (without telling me) had turned the screen round the wrong way and forced it!! ARGH!! i wound it round untill it allowed the screen to rotate nicely, seemed to solve the touch screen problem. anyway though i would post that hope it helps someone.
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
Raptorgda said:
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
Click to expand...
Click to collapse
do you have the part number etc, something i can put in the search engine...
I tried "XDA EXEC touch screen" and as if by magic there it was......lol
write in ebay sercher Xda exec digitizer
Ok I need help from the gods of xda
I dropped my tilt the other day. When I picked it up everything seemed fine, yet the screen was completely white. No signs of cracks or a broken lcd. So I've tried the following: Soft reset, Hard reset, took out the battery, took apart the phone and disconnected the lcd and then re connected it. Still the same problem. WHITE SCREEN!
I can still receive/make calls, when i touch the screen in places where i remember the menus to be it still responds due to the noise, also the open and close noise still sounds.
The phone was bought new on Ebay, so i don't have a warranty through them or AT&T. After much research I hear people saying the same has happened to their phones as well and that there is a ribbon or flex cable problem. Something about still giving power to the LCD but not data, thus the white screen.
Now what I dont understand is do I need a new LCD because it has that ribbon/flex cable on it???? (link)
or
Do I need this product?(link)
Both contain a "flex cable" so im confused and frustrated, someone please help! any ideas would help
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
vsicarbon said:
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
Click to expand...
Click to collapse
hi there, would it be possible to post the link to ebay item? i also need a new touch-screen.tnanks
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Click to expand...
Click to collapse
That i dont know but here is the link to the LCD screen w/ digitizer
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=350099750789&Category=162&_trksid=p3907.m29
Same product and vendor I got mine from. Shipping took 3 business days. I advice to buy the insurence
Park City said:
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
Click to expand...
Click to collapse
Tuck in for a long read and perhaps no single answer for all cases:
http://forum.xda-developers.com/showthread.php?t=303872
In short, yes the d/pad cable and LCD screen connections are linked which is why it is not uncommon for the white screen to show up when the d/pad is not working.
To the OP - I would just point out that if you get the white screen after a fall it may just be a loose connection at the d/pad and no need for new parts.
Dismantling instructions here:
www.mikechanon.net
But let's not start discussing the white screen here, please use the first link I gave above if you need to post.
Mike
a user i dont recall now his name,fixed is whitescreen by replacing the camera,open the device and remove the camera module, reassemble to test.
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hi, I know there are other post related to this same issue, I've searched the forum, but haven't been able to find what I'm looking for.
The four capacitive buttons on my Desire Z have suddenly stopped working, and I'm 100% certain it's a hardware fault, because the problem remained after restoring old backups, and also wiping and flashing another rom. The problem I've got is that I not sure what the part I need is called because a search for capacitive buttons on ebay turns up nothing.
Does anybody know what part I need or where I could find one.
Thanks in advance.... ...John...
j0hn0n1 said:
Hi, I know there are other post related to this same issue, I've searched the forum, but haven't been able to find what I'm looking for.
The four capacitive buttons on my Desire Z have suddenly stopped working, and I'm 100% certain it's a hardware fault, because the problem remained after restoring old backups, and also wiping and flashing another rom. The problem I've got is that I not sure what the part I need is called because a search for capacitive buttons on ebay turns up nothing.
Does anybody know what part I need or where I could find one.
Thanks in advance.... ...John...
Click to expand...
Click to collapse
Just the button area? Or the entire screen?
Note that the hardware you are looking for is called a DIGITIZER.
HOWEVER, you should also note that the capacitive digitizer, being CAPACITIVE, requires that you make a solid electrical contact between the glass and the phone's body (static charge transfer, capacitor discharge). Try moistening your hand a bit, try holding it in your other hand (I find that it is hard to make a good contact in my LEFT hand, but works great in my RIGHT). Try cleaning the digitizer with rubbing alcohol.
Just the Buttons, I was thinking that if it would have been the Digitizer then it would of affected more of the screen, what I think I needed was the little strip that holds the four buttons and trackbutton thing.
It's all right anyway, since I wasn't really sure what I was looking for I handed into a repair shop about an hour ago. I usually prefer to repair things myself, but I wasn't really sure where I could buy a whatjamacallit or a thingamibob. .
Thanks anyway.. ....John...
The capacitive home button on my Streak 7 died due to static shock. I'm surprised this doesn't happen more often since the phones are always in a pocket.
here ya go
http://www.ebay.com/sch/i.html?_fro...13&_nkw=g2+trackpad&_sacat=See-All-Categories
After reading several posts to find a cure for my HTC HD2 unresponsive touch screen,( Slider wont slide to open applications), I decided to verify a theory. Software... Digitalizer screen, or power button.
Ok, first I Instelled about six different android versions, and the screen slide still failed. I reverted the cell back to original t-mobile windows software, and still locked screen.
Conclussion: The sofware is not the problem.
After several attempts pressing the red power button, I got the slider to open. Briefly, it locked again. Pressed the red button hard and tried to work the slide on the touch screen. Again briefly worked. After several more attempts I got it to slide and while the phone was awake, everything worked perfect. I played games, oppened applications, texted, made phone calls, and the touch screen worked flawless.
Conclussion: The digitalizer (Thin top glass screen on top of the display that responds to touch) is not the problem.
This led me to belibe that the power button was at fault. I called T-mobile and after explaining the problem, they decided to send me a different type of windows cell. I want my htc. So I declined the offer and decided to void the warranty and take matters in my own hands. Yes, I opened my HTC HD2. This is what I found: After about an hour I had carefully taken my htc apart without braking or scratching the phone or screen. When I finaly got to the buttons on the bottom, I noticed how cheap they where made. A thin copper circle on top of two contacts held in place by tape. Yes you heard right, tape. After a while, beating on the red end key for maybe a year or two, the tape brakes and the metal piece slides to the side, and makes the button to malfunction, that's why the hard pressing to make it work. I tried A bottle of comppressed power air to clean them before disassembling the phone but the way they are installed It's not possible to clean them like that.
Conclussion: The red end key is faulty.
I decided to keep the cell alive so I went on e-bay and ordered the buttons, and just in case I also got a new digitalizer for testing purpose.
The buttons panel was about 4 dollars and some change, and the digitalizer (touch screen) was about 14 dollars for a total of less than 20 bucks. (Worth it)
So here are some pics of my cell buttons, and what it should look like. After I get the parts and assemble it I will conclude and let you know the final and official veredict. As of now, it all leads to the button.
Please do let us know how you got on. I have a HD2 which I'd like to get up and running again so I can play with custom roms and leave my other mobile alone...lol. Any chance you could link to the places you got parts/tape from, and what tools we would need?
Cheers! :good:
Did it worked ??? i am also in the same situation...please share the details,
bijeeshvs said:
Did it worked ??? i am also in the same situation...please share the details,
Click to expand...
Click to collapse
+1
listening in as well
sheesh! my wife's HD2 also stop responding yesterday, seems like clockwork that a lot are having the same problem
first have to find "how to open your HD2" w/o breaking anything in the process :silly:
Damn. The second time I'm hearing about the red button giving problems.... Will be waiting results from you dude!!! +1
still wayting for the parts
Well, I am still wayting for the parts, they are on the way. The parts I found on E-bay. The buttons panel was about five or 6 dollars, I also got the digitalizer which was about 15 dollars. As soon as I get the parts, I will assemble my hd2 with the original digytalizer (the thin top screen) and test to make sure the buttons were the problem. If all goes well, I will post a complete test result with links to how to get the parts, a link on how to dissassemble the hd2 and all info I can to help on this issue. I did a step back in life, and pulled out my trusty 7 years old motorola razr v3 and stuck my sim card so i can talk and text 5 words in 7 minutes. No internet... I need my HD2... Well, I will report back as soon as I can. Thanks for the wait...
@dragonsuicida
will be waiting for your findings & ways to dis-assemble the HD2 :fingers-crossed:
You were lucky to find the buttons' panel for 4bucks. I just checked out Ebay india, and the panel is 40bucks!!! What a robbery!
Wow. Me too!
I have been running Win6.5 still on my HD2, and have found in the last few days, my screen locks and I can't unlock it.
I came here deciding it was a software issue and was going to look into putting Android on my HD2.
I was slowly coming to the conclusion that it was the power button.
If I make an effort to NOT touch it - my phone seems happy.
It's amazing that we're all having the same problem about 2 and a bit years down the track since the HD2 was released - almost a built in expiry!!
And yeah - lots of details on how to fix it would be great.
The HD2 is too good-a-piece of hardware to allow a ****ty hardware button to be the cause of it's death.
New Keypad Button Flex Cable Ribbon For HTC HD2
Copy this:
New Keypad Button Flex Cable Ribbon For HTC HD2 T8585 and paste it on ebay, it will bring the buttons for the htc hd2. I belive they all come from china, but after I test them I will let you all know if they work and if they are worth it.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
copy this: http://www.youtube.com/watch?v=YdOC3Xxo_k0 and paste it on your web browser, and it will lead you to a video on How To Replace Repair Disassemble Screen Digitizer. When it gets to a part that say that you have to put the phone in a oven, is just to melt the tape or glue holding the screen to the phone. I just used a hair dryer to war the screen enough to carefully remove the screen and the digitizer from the phone without breaking them, It works. I will be back soon with more info. I believe my digitizer screen is on the mail box now. Will report back...
I have same problem. Today I bought a flex cable ribbon and waiting for the dispatch (estimated in 2 days). I will also report back..
Same problem here!
Hope to hear soon that this is the way to go to fix it
You have to stick back the tape in the housing. The tape is electrically conductive. It connects the ground of the keyboard flex cable with the ground of the housing.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
Click to expand...
Click to collapse
Be careful! There are two types of digitizer:
- Solder version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-solder-version/
- Socket version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-socket-version/
Be very careful when ordering parts, specially the digitizer they have several kinds, solder and socket, and different socket sizes. Compare parts with the ones in your cell to make sure, don't just believe the advertisements.
Hi, any updates on this? I'm also having this issue, but in my case, even pressing end call really really hard doesn't solve the problem... snif..
+1 on that
i pressed all the keys even the lower part of the LCD & flashed new roms but no joy :crying:
will bring to shop instead I'm afraid to open it up, it might end up even worse
Just be extremely careful when you try this. That flex cable is so incredible fragile and easy to tear. My roommate tore the volume rocker section right off of his HD2.
Hi dragonsuicida
Were you able to get your touchscreen to work?