Sorry guys,
Another rollback thread.
I have my P9 lite. I installed twrp recovery + nougat rom.
I have to rollback for some reasons.
I followed :
x to flash android 6.0 europe rom https://boycracked.com/2016/09/14/official-huawei-p9-lite-vns-l31-stock-rom/ the update works but phone is still looping reboot/logo
x a thread of Huawei website here http://consumer.huawei.com/be-fr/support/products/downloads/p9lite-befr.htm, you have to flash an intermediate package (UPDATE.APP) by visiting the official EMUI website
(i founded it with Beni2567 thread on xda) https://forum.xda-developers.com/huawei-p9lite/help/rollback-nougat-7-0-to-mm-6-0-t3555493
Update is stuck at 5% then after few minutes, the phone reboots., then said my device has been unlock, then huawei logo, then reboot again...
I never succeed to go back with a functional android system :s
Man, why not read arround before making stupid mistakes?
First thing to do was to flash Oeminfo!
That because once you are in Nougat, your phone Oeminfo is modified in a way that is not recognized by lower firmware...
That step is included in tutorials arround...
1. flash TWRP (thanks to @BadWolfYe )
2. Flash this file (OEMINFO!)
3. Put the MM UPDATE.APP in the DLOAD folder on EXTERNAL SDCARD
4. Install it using the 3 button method (dload method)
5. Factory reset
6. DONE!!
Now you have a nice bricked phone!
So, I had problems with my Huawei and I can't downgrade it! Me and @persona78 tried to downgrade it, because I had "Hard" Cust witch means just file cannot be overwritten by fastboot or TWRP @persona78) so I started thinking harder then ever! So, I managed I have 4.0.3 EMUI, but there wasn't problem, so I again started thinking! And I got solution!
1. Step Download B575 firmware! Keep it safe you will need it!
2. Step Run TWRP 3.1.1.0( if you don't have it search for it on Forum Type TWRP 3.1.1.0 @sudru_pedru is OP in they threat )
3. Delete System and don't reboot!( You don't have system now)
4. Flash B575 firmware and then reboot!
5. After bootup download local update and install it by stock recovery!
6. Now download downgrade package(In google search type this Huawei pt and first link)
7. After download extract update.app in dload folder(don't have? Create one)
8.shutdown phone and press all 3 buttons at the same time it will start update!
9. Booted up now download b170 or your country 5.0 android firmware
Extract At dload folder and delete old one, about 227MB(delete IT)
10. NOW step 8 and wait until it is finished!
See now you have 5.0 android and working Sim Card's!
I am Not responsible for your dumbness and bricking device! Slap that Thanks button if I and @persona78 helped you! Without him I couldn't make it! And Yeah sorry for my English!:good:
Hi guys,
I tried to find a guide on how to do this coming from a custom rom but I couldn't so I'm posting what I think the process is and hopefully someone can tell me if this is correct. I just don't want to brick my phone so want to be absolutely sure the entire process is correct before I undertake this.
Coming from Custom rom means
1. Bootloader unlocked
2. Twrp already installed
Download Files
1. http://pro-teammt.ru/firmware-database/?firmware_model=mha-l29&firmware_page=0
2. Get the right 3 files for your phone, mine is C636 (rebranded from Chinese version) so i'll be getting: MHA-L29 8.0.0.360a(C636) files
3. Rename them to update.zip, update_data_public.zip, and update_all_hw.zip
Flash Update
1. Use Vol-Up + Power to boot into TWRP.
2. Create "HWOTA8" directory in MTP sdcard.
3. Put hwota8_update.zip, MHA_RECOVERY8_NoCheck.img, and three huawei update package (update.zip, update_data_public.zip, and update_all_hw.zip) files into "HWOTA8" directory.
4. TWRP install sdcard hwota8_update.zip, it will reboot and install update automatically.
If I missed a step or something is wrong please let me know!
Thanks for the advice in advance guys!
Cheers,
Mike
Can I switch from 321 (C185log) to this update without opening boot loader or no
sorry i'm not sure because i'm actually posing the upgrade question
You can see this article may be of benefit to you
https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-mate-9.3022/anleitung-mha-l29c432-rebranden-und-die-aktuellste-oreo-rom-c636b360a-installieren.857223.html
No, you need to use HWOTA, not HWOTA8.
HWOTA8 is only used if you are on Oreo already.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
how to rebrand 432 for 636 for update 360a (c636) Oreo?
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 3 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
ceriqdesign said:
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 2 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
Click to expand...
Click to collapse
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
manuele16 said:
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
Click to expand...
Click to collapse
are you using HuRUpdater method?can you give me more info about your mate 8
ceriqdesign said:
are you using HuRUpdater method?can you give me more info about your mate 8
Click to expand...
Click to collapse
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
manuele16 said:
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
Click to expand...
Click to collapse
So originally you came from NXT-AL10 and without changing oeminfo with SRK Tool then you used the HuRUpdater?
Is it your bootloader still unlocked or locked?
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
I managed to get Vendor: hw and Country: eu.
but I'm still in nrd90
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
Yup no wonder you're on NRD90M..you need to change oeminfo first before flash c432 firmware..
TWRP Huawei mate 8
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
riky26 said:
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
Click to expand...
Click to collapse
Sorry for late reply as for now i'm quite busy with life..can you tell me what your model before you change to NXTL26C605B580?
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Try to install Service ROM from SD card using dload method.
Link:
https://androidhost.ru/41d
Follow instructions in file "ReleaseDoc". (Read everything carefully before doing anything).
Through this process, your data will be deleted and bootloader will be locked again.
Dload method works with Stock Recovery only, you have to install Stock Recovery first.
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Dadditz said:
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Click to expand...
Click to collapse
Please read carefully, Maestro :
"I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom."
Piece.
Hello,
I reinstalled the custom rom that I found on the net: C432B414 with Hurupdater.
It works.
However, the bootloader is still unlocked ... however, I would like to return to the factory configuration with the bootloader locked.
https://www.cjoint.com/c/JItgZO6GuGB
I have the stock recovery install :
https://www.cjoint.com/c/JItg7SqQmdB
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
toto6976 said:
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
Click to expand...
Click to collapse
Unpack downloaded .zip package, you will see two files - ReleaseDoc and Software. Open "Software" and unpack SDUpdate_Package.tar.gaz. Transfer file dload to SD card and follow instructions - there is 'Software upgrade guidline' in file ReleaseDoc.
Edit.:
You can also safely lock BL with OEMINFO flashing and rollback to A6:
-Download OEMINFO:
https://mega.nz/#!xhEwFYLZ!Sv2nB5GERB_js76sAUWxj8hQgsjnf_YPobVbtrxpCew
Transfer it to the SD Card.
Download VNS-L31C432B160 fullupdate.zip:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
Create a folder dload on your SD , unpack downloaded .zip file and copy it to the dload folder.
Install TWRP 3.1.0-2:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
using command
fastboot flash recovery2 twrp.img (OVER eRECOVERY!) , boot in TWRP, fĺash oeminfo.zip , go back to TWRP's main menu, select Reboot and Power Off. Then use three button combo and flash firmware from dload. Your phone will running A6 with locked bontloader. If you want, you can upgrade back to A7 via OTA update or using Fipmware finder.