I've tried this in 2 XDA II's. I put my headphones it one and it works but you cant hear it and you have to hit the cap around a little for it to get sound for a slip second. I put my headphones in another XDA II and it works fine.. So obviously there is something wrong with this XDA II's headphone jack. The rubber cover to the headphone jack is missing, would this have any effect on it?
EDIT-
When I put it in the broken headphone jacked PDA when I insert the headphones in it makes a crinkle noise from me pushing it in. The other XDA II goes in smoothly. =/
Hi.
Rubber cap doesn't change anything (apart from stopping rubbish from getting into connector )
What you described is a case of worn out connector (in PDA).
It happens sometimes. Jack type connector aren't so tough, especially when you plug in and out often.
If you dismantle Blueangel, you'll have clear view of connector body soldered to PDA's mainboard.
You can do it. You can let somebody do it. Or You can leave it to professionals.
The connector needs to be replaced (very cheap part).
Maybe it's enough to bend metal terminals inside a little. A person who does hardware will know.
There's a optimistic version though.
Maybe only cleaning the terminals would do for you (I doubt it though).
It can be done without opening BA.
I'd recommend using some special spray (for cleaning electrical contact metals). Ask in electronic parts shop.
Good luck.
I ment my XDA II, not XDA IIs, lol. I have no expierence with opening the phone but I am good with electronics, but I don't know exactly what I'm looking for =/. I think I might just buy the HT820's Bluetooth headset, that would solve my problem overall.
Faulty socket repair...
Hey guys,
I have the same problem as above (crackling sound through headset) and the O2 service centre said it would cost £97 to fix.
But just did a web search and found a small company in London that said they can fix it (within 2 hours!!!!) for only £30!!!!
Im off to get it sorted so I'll let you know how it all went!!!
Richie Rich.
Mine wasn't like this until I bought it. I bought it from a friend for only $100USD because I'm very good friends with him, it works fine perfectly but the only problem is the headphones don't work in it (any headphones) and he knows there is something wrong with the jack, it wasn't like this until recently it happened. It's cheap to fix probably... but I'd rather just buy the HT820 bluetooth headset, its a good replacement instead of having to send in the PDA to fix a little headphone jack port I wont be ever using sooner or later.
but hey if that place fixes your phone, reply to this topic I want to know!
Headset Jack
I had this exact same problem in the past.
The headset would crack and go out every once in a while, sometimes I would have to move it around in order to get any sound at all.
I didn't do anything about it until it completely broke off, yes the inside plastic connected to the motherboard broke...
So I went to open it up, its not that hard, just a few screws, but I had to buy a torax screw driver (not that expensive)
I was also a bit shy about opening it, but I found this post:
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=opening+himilaya
you wont have to open it all the way up... just pulling the back cover off, then you will see the headset jack,
If it isn't broken or cracked then your solution would just be to take the metal connectors and a flathead screwdriver, and bend them,
Don’t bend the metal connectors too much so you can’t put a headset in, but just enough where there is definite connection around the headset,
You might want to put a headset in and see the dimensions before you close it (to save you from opening it up again)
You might want to clean the metal if it is dirty, ether with a dab of eyeglass cleaner on a soft cloth (eyeglass cleaner works well with electronics, due to the alcohol that evaporates)
Although if the metal is encrusted or rusty, you might want to take a small strip of sandpaper, or some abrasive object, but don’t rub too hard or you'll take them off!
Don’t worry too much about opening your device up; it is not hard, just open it with caution.
Good luck!
imablackhat, hi, did u mean that ht820 can output sound from media player & every sound from xda2? my current BT is bluetrek G2 and as far as i'm using it for talking only. how many hours the batt can last if we continously hear musics?
its 17 hours of music, www.expansys.com, search HT820, its the headset. I'm considering buying it for cheaper on eBay.
hey guys,
here is the short story of whats up. I broke off the tip of a headphone adapter in my wizard. basically the smallest piece of metal is stuck in the headphone jack and refuses to come out.
First, any ideas on how to get it out, I tried toothpick/paper clip with super glue not too much luck. If its easy to take apart say so and I'll try that.
The other part is that my phone makes no noise and I can't talk into the mic on it cause the phone thinks there is constantly a headset attached. Anyone know a workaround on getting the jack disabled or a workaround like that?
Thanks in advance
It happened to me once. I took the phone apart, and poked a pin into the other end of the headphone jack (the one facing inside the phone) and it eventually popped out. Maybe you could try some small tweesers if you don't want to take it apart.
Taking it apart isn't so hard, you need a small torx key, and somethign flat to prise bits open.
I did a REALLY a stupid thing this weekend. I had the trunk of my wife's car up and had no pockets, so I put the phone on the edge of the trunk and put everything else in the trunk. I swung the lid down and it bounced back up.
I had no idea what was keeping the trunk from closing until I saw my phone sitting there. Thankfully, the trunk's on a Toyota Echo, so it didn't crush the phone, but it did dent the faceplate right where the speaker and email/browser button is.
Now calls are really scratchy and crackling, so I'm guessing that I have a partial connection to the speaker or crunched it well enough to kill it.
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
kcfried said:
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
Click to expand...
Click to collapse
How about you!!??
All the info you need is here.
Mike
I know this thread is a bit old, but I just fixed the same problem with my Hermes.
Find a good disassembly guide and pull the beast apart, when you get to the speaker, it will be caved in/crushed.
There are two clips on either of the long sides, unclip them and carefully lift the metal bit off a little way, get a small jewelers flat head screwdriver and push the dints out, being very careful of the delicate wires.
Or you could just find a new speaker
EDIT: While you're at it, bend the speaker contacts out a bit too just in case they were squashed, also to get better contact.
Hello, i realised that my fron speaker is full of dust , very dry dust.
I tried to clean it with a very thin brush but no succes.the holes ar very small.
I tried with a wet towels but no succes as well.
Its very frustrating for me, i dont wanna desassambly the phone ,i want a solution , a tool suggestion..something...
Dont say something like vacuum cleaner coz it will sure breake the speaker.
Have you thought of using something sticky like Blu Tack?
Hi, yeasterday I replaced broken mic (incl. charging USB port) and battery on my LGG6+. After that I tried and test if everything is OK and I found that loudspeaker is not working .. I dissassembly and assembly phone after that a few times, I checked every possible reasons for this problem, I gently cleared all connectors between board and mic part (and tried to use also old mic & USB part) .. but without any success.
Maybe it's related (and I'm not really sure, that this part is from LGG6) with this problem, after first dissassembly I found this little peg with sealing ring on my table (in attachement).
The size (lengh) is appr. the same as 11 screws holding plastic cover of board. It seems like screw, but it's a little thicker and without thread. Do you have any idea if it's also part of this phone and if so, where is this peg placed inside the phone? I have absolutely no clue, where is this part from ..
http://sdilej.eu/pics/b4c96840945677a6caea33af67f39603.jpg
So, please give me any hint how to solve the problem with not working loudspeaker, I'd like to use my phone again :] .. Thanks!