Hey guys,
Due to lte connection problem, carrier customizing, etc..., I have a question:
I have K version, could I flash S version by Odin in my n935k model?
here http://tekhd.com/ at 06 July 2017 date you can find all the firmwares as below:
SM-N935K_N935KKKU3AQFE Firmware update for the Samsung Galaxy N7 FE K variant. (SM-N935K)
SM-N935L_N935LKLU3AQFE Firmware update for the Samsung Galaxy N7 FE L variant. (SM-N935L)
SM-N935S_N935SKSU3AQFE Firmware update for the Samsung Galaxy N7 FE S variant. (SM-N935S)
System Dump + Boot Image
N7FE-N935SKSU3AQFE-SYSTEM-CSC-BOOT_(ODEX)
N7FE-N935SKSU3AQFE-SYSTEM-CSC-BOOT_(DEODEX)
Thanks to @tekXodus
isn't it just the CSC you need for network stuff? Don't see why it wouldn't but back up phone first.
Google for the K variant: it's on a vietnamese site. It works too. Have installed it twice so far.
bonerp said:
isn't it just the CSC you need for network stuff? Don't see why it wouldn't but back up phone first.
Click to expand...
Click to collapse
three firmware has different cusomized setting menu, I don't know if the three firmware are compatibles each other.
zamzenos said:
Google for the K variant: it's on a vietnamese site. It works too. Have installed it twice so far.
Click to expand...
Click to collapse
@zamzenos I really don't understand your message, you have installed what? and in whic devices?
at the end my question is: there are some hardware differences? or n935s/l/k are exactely the same and they have interchangeable firmware?
malaccio said:
three firmware has different cusomized setting menu, I don't know if the three firmware are compatibles each other.
@zamzenos I really don't understand your message, you have installed what? and in whic devices?
at the end my question is: there are some hardware differences? or n935s/l/k are exactely the same and they have interchangeable firmware?
Click to expand...
Click to collapse
Variant K = n935k. I assume that it's best to match firmware to what you already have. I have already installed the K stock on my n935k FE. You are looking for the K variant, yes? I told you where you might find it and also that it is OK to use.
I have n935k model and I m looking for K version of the firmware in order to have the original firmware in case during the S firmware flashing something goes wrong..
Do u have a link for the k version? I didnt find it on google
malaccio said:
I have n935k model and I m looking for K version of the firmware in order to have the original firmware in case during the S firmware flashing something goes wrong..
Do u have a link for the k version? I didnt find it on google
Click to expand...
Click to collapse
try this: https://drive.google.com/uc?id=0B40ItdHKfkyQMy01Z0xMNXJ5dWs&export=download
Has anyone tried flashing the n935s firmware on n935k? Does it work ?
Sent from my SM-N935K using Tapatalk
DarkManX4lf said:
Has anyone tried flashing the n935s firmware on n935k? Does it work ?
Sent from my SM-N935K using Tapatalk
Click to expand...
Click to collapse
yes, i tried it. there are a few new settings options, and different splash screen but nothing special in my opinion. i flashed back to the K version about 30 minutes later.
cortez.i said:
yes, i tried it. there are a few new settings options, and different splash screen but nothing special in my opinion. i flashed back to the K version about 30 minutes later.
Click to expand...
Click to collapse
Ah ok. I was hoping there would be an option to enable VoLTE for T-Mobile.
DarkManX4lf said:
Ah ok. I was hoping there would be an option to enable VoLTE for T-Mobile.
Click to expand...
Click to collapse
do you know for sure it's not working? for example, if you dial voicemail, do you still have the LTE icon on your phone signal? that's what i did and i also checked, Settings->About Phone->Status->Sim Card status and while i was connected to voice mail, mobile network type remained LTE.
cortez.i said:
do you know for sure it's not working? for example, if you dial voicemail, do you still have the LTE icon on your phone signal? that's what i did and i also checked, Settings->About Phone->Status->Sim Card status and while i was connected to voice mail, mobile network type remained LTE.
Click to expand...
Click to collapse
Yeah it doesn't work. Well this is how I have been checking. While on a phone call I try to view a webpage and it won't load or I try to run a speed test and it won't run. While on a call it shows LTE+ in the status bar but just no data passing through.
While on a call, I checked Settings->About Phone->Status->Sim Card status and it says LTE but like mentioned just can't access anything data related.
Sorry I maybe mixing up VoLTE and using data (specifically LTE data and not WiFi) while on a phone call. After doing some research these are two different things.
My issue is using data while on a call.
BerndausLB said:
Could you specify "a few new settings options" please?
Click to expand...
Click to collapse
unfortuantely, i can't remember the differences.
Just to inform you that N935L version has no customized menu.
N version has one entry in the main settings (between connection and sound)
S version has two entry in the main settings (between connection and sound and one after applications)
Sorry.. i mean k version
Done!
malaccio said:
Just to inform you that N935L version has no customized menu.
N version has one entry in the main settings (between connection and sound)
S version has two entry in the main settings (between connection and sound and one after applications)
Click to expand...
Click to collapse
Does flashing a different version wipe your phone data?
cosimor said:
Does flashing a different version wipe your phone data?
Click to expand...
Click to collapse
Yes it does. But you can easily backup your Data via Samsung Cloud or Smart Switch.
Does flashing a K rom to a S device break KNOX? TIA.
Related
Hello. Bought a Used Samsung Galaxy S I9000 2 days ago just for having some fun. Im facing a problem. I dont know whether this is a problem or just a bug as im on Android Ver 2.3.4.
When phone uses network to make call or message or use data connection over network screen start to flicker as some magnetic thing is placed near screen. Is this a bug or a Hardware fault ?
Thanks and im new to this forum if this is posted in wrong section please feel free to move it. Thanks.
any one ? any reply ? so many views but no reply.
Update your phone's software via Kies or flash a custom rom
jstgabytz said:
Update your phone's software via Kies or flash a custom rom
Click to expand...
Click to collapse
manually updated it to ver 2.3.6 but still the same problem. i think its hardware fault.
panjgoori said:
manually updated it to ver 2.3.6 but still the same problem. i think its hardware fault.
Click to expand...
Click to collapse
Well you said it's used so the chances that it will be hardware fault are high, but you always can go to a fixing lab just to check if there's an hardware problem
This could be the proximity sensor. Had this on an old device. Only a few pounds on ebay to buy a new one.
Sent from Paul. If I helped please click the 'Thanks' button.
panjgoori said:
When phone uses network to make call or message or use data connection over network screen start to flicker as some magnetic thing is placed near screen. Is this a bug or a Hardware fault ?
Click to expand...
Click to collapse
check hardware with this https://play.google.com/store/apps/details?id=com.fivasim.androsensor&feature=search_result
certain hardwares problems can be fixed by using this codes http://forum.xda-developers.com/showpost.php?p=26542865&postcount=4452
technician manual http://forum.xda-developers.com/showthread.php?t=1709378
xsenman said:
check hardware with this https://play.google.com/store/apps/details?id=com.fivasim.androsensor&feature=search_result
certain hardwares problems can be fixed by using this codes http://forum.xda-developers.com/showpost.php?p=26542865&postcount=4452
technician manual http://forum.xda-developers.com/showthread.php?t=1709378
Click to expand...
Click to collapse
checked that app. hardware seems to be working fine. whenever i dial a number from other phone and put it at the back side of galaxy s screen starts to flicker as some lines comes on screen as you see a lcd on a camera. this happen only till the phone dials the number and then gone.
panjgoori said:
checked that app. hardware seems to be working fine. whenever i dial a number from other phone and put it at the back side of galaxy s screen starts to flicker as some lines comes on screen as you see a lcd on a camera. this happen only till the phone dials the number and then gone.
Click to expand...
Click to collapse
why don't you update your firmware to latest
xsenman said:
why don't you update your firmware to latest
Click to expand...
Click to collapse
last time a checked three days ago there were no update for my device so i updated it manually to version 2.3.6 XWJW1 firmware. its not the value pack version.
panjgoori said:
last time a checked three days ago there were no update for my device so i updated it manually to version 2.3.6 XWJW1 firmware. its not the value pack version.
Click to expand...
Click to collapse
you are picking up interference from somewhere , so best to check if you are on the correct radio firmware or your unit may have been repaired before and they have not housed back properly , since it is only picking up interference at close range with other radio frequencies
check http://forum.xda-developers.com/showthread.php?t=1102881 for the correct firmware package based on your location
anyone else having this kind of problem with their galaxy s ?
panjgoori said:
anyone else having this kind of problem with their galaxy s ?
Click to expand...
Click to collapse
My friend's unit and mine does, this only happens on 2G
xsenman said:
you are picking up interference from somewhere , so best to check if you are on the correct radio firmware or your unit may have been repaired before and they have not housed back properly , since it is only picking up interference at close range with other radio frequencies
check http://forum.xda-developers.com/showthread.php?t=1102881 for the correct firmware package based on your location
Click to expand...
Click to collapse
as my country comes in Middle East/Africa im downloading these three files: for phone/baseband i downloaded this file: Gingerbeard 2.3.3 Middle-East and Africa JXJV6, for firmware Gingerbeard 2.3.4 JPJVC/JXJV6/OJPJV7/Sbl (MultiCSC), and stock kernel for middle east and africa.
is im choosing correct files ? Currently my phones baseband version is XXJVP.
panjgoori said:
as my country comes in Middle East/Africa im downloading these three files: for phone/baseband i downloaded this file: Gingerbeard 2.3.3 Middle-East and Africa JXJV6, for firmware Gingerbeard 2.3.4 JPJVC/JXJV6/OJPJV7/Sbl (MultiCSC), and stock kernel for middle east and africa.
is im choosing correct files ? Currently my phones baseband version is XXJVP.
Click to expand...
Click to collapse
any combination of PDA, Modem and CSC is possible, as such you even use the JW6 being 2.3.6, with your country CSC and Modem
xsenman said:
any combination of PDA, Modem and CSC is possible, as such you even use the JW6 being 2.3.6, with your country CSC and Modem
Click to expand...
Click to collapse
thanks. im downloading it now.
MrAndroid12 said:
My friend's unit and mine does, this only happens on 2G
Click to expand...
Click to collapse
is there any chance of screen failing completely because of this ?
panjgoori said:
thanks. im downloading it now.
is there any chance of screen failing completely because of this ?
Click to expand...
Click to collapse
It's just radio interference, i don't see how that has anything to do with failing screen
flashed phone. but still the same thing. will use the phone as long as it will work fine.
panjgoori said:
flashed phone. but still the same thing. will use the phone as long as it will work fine.
Click to expand...
Click to collapse
Switch modem. I had this too, it happens when you have modem which is using too much power to make calls.... Which means you have rock solid and stable signal, but it interferes with the rest of the phone...Try JVQ or JVT modems.
Virnik0 said:
Switch modem. I had this too, it happens when you have modem which is using too much power to make calls.... Which means you have rock solid and stable signal, but it interferes with the rest of the phone...Try JVQ or JVT modems.
Click to expand...
Click to collapse
tried both. but still no luck. btw i tried JVQ Australia/New Zealand one.
edit: now tried both but still no luck. and one thing does it requires to flash full firmware including PDA,CSC or just replace the modem with these two which you named ?
since there is no love for N915G and no one is making any Rom for it, i thought at least knowing that there is a new firmware might not be bad idea to cheer you up.
sammobile:
SM-N915G Taiwan 2015 January 4.4.4 N915GZTU1AOA2
How to FLASH:
***this WILL NOT erase anything on your phone(not even applications), but it will take the root away (you can root again and every thing will get back to the way it was)
Extract (unzip) the firmware file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
don't change anything in Odin
Click the start button, sit back and wait a few minutes
LINK:
it seems that i'm not allowed to put the link here because it was removed.
so maybe you could go to sammobile and look for SM-n915G in firmwares.
hope there will be a firmware update for the 915FY, cannot flash this firmware on the 915fy
Flash good on voda aussie n915g ?...been trying for at least 8 hrs...network...wifi...call all seem ok. Not sure whats special and fix this firmware include. I guess there wont be much since the lolly is just around the corner...
Sent from my SM-N915G
i tried it already and backed to Original one , it's Good thx for sharing
kuailan said:
Flash good on voda aussie n915g ...been trying for at least 8 hrs...network...wifi...call all seem ok. Not sure whats special and fix this firmware include. I guess there wont be much since the lolly is just around the corner...
Sent from my SM-N915G
Click to expand...
Click to collapse
don't get your hopes up, you might not get the Lollipop that soon.
and it's always worth it to update, especially when it's that easy. of course there are tweaks and bug fixes.
Bofahad said:
i tried it already and backed to Original one , it's Good thx for sharing
Click to expand...
Click to collapse
you're welcome.
Is it flashable on N915K devices??
I am from India
inderlover said:
Is it flashable on N915K devices??
I am from India
Click to expand...
Click to collapse
NO. this is an original Firmware only for N915G
Looks like the firmware is for India only
belveder69 said:
Looks like the firmware is for India only
Click to expand...
Click to collapse
india note edge is SM-N915G not SM-N915K
ash969 said:
hope there will be a firmware update for the 915FY, cannot flash this firmware on the 915fy
Click to expand...
Click to collapse
just flash n915f firmware... same phone !
Just wanted to say that I have updated to this firmware and have found it to be good! I have a Telstra Note Edge SM-N915G and this new firmware has added quite a few new options for the edge screen including the left-handed mode and some more features.
millab said:
Just wanted to say that I have updated to this firmware and have found it to be good! I have a Telstra Note Edge SM-N915G and this new firmware has added quite a few new options for the edge screen including the left-handed mode and some more features.
Click to expand...
Click to collapse
Also now has a setting for screen off timer on the edge, so you can set it up to 10 minutes.
I have gone back to a previous built now, as I was having some issues with 'Sim Card not Detected' messages and I am trying to work out what is causing it.
millab said:
Also now has a setting for screen off timer on the edge, so you can set it up to 10 minutes.
I have gone back to a previous built now, as I was having some issues with 'Sim Card not Detected' messages and I am trying to work out what is causing it.
Click to expand...
Click to collapse
Hmmmm I tried this firmware before...but found no much difference than the latest Voda firmware...that's why I switch back to Voda. I'm not sure what left hand mode or timer features...but I don't think it's anything new ...even the Voda firmware has it. Of course I can be wrong since I don't have a telstra model ...maybe your firmware is much much older ??
Sent from my SM-N915G
kuailan said:
Hmmmm I tried this firmware before...but found no much difference than the latest Voda firmware...that's why I switch back to Voda. I'm not sure what left hand mode or timer features...but I don't think it's anything new ...even the Voda firmware has it. Of course I can be wrong since I don't have a telstra model ...maybe your firmware is much much older ??
Sent from my SM-N915G
Click to expand...
Click to collapse
Yeah the Telstra firmware is older ANK3 and is missing heaps of the settings from the edge, but I am now currently on ANK4 and it doesn't have the edge screen timeout setting but does have the rotation setting.
Someone leak Lollipop already...
The N915F has one, why not the N915G...
Beach_Head said:
Someone leak Lollipop already...
The N915F has one, why not the N915G...
Click to expand...
Click to collapse
And for N915S pleas!
Sent from my SM-N915S using XDA Free mobile app
Beach_Head said:
Someone leak Lollipop already...
The N915F has one, why not the N915G...
Click to expand...
Click to collapse
No chefs for 915G, no custom roms hence no Lollipop... Want it, learn to cook... :laugh:
ultramag69 said:
No chefs for 915G, no custom roms hence no Lollipop... Want it, learn to cook... :laugh:
Click to expand...
Click to collapse
Actually the lollipop that has been leaked is an official rom, not one that someone has cooked
Mod Edit
Please use this SM-N915G lollipop :
http://forum.xda-developers.com/note-edge/general/finally-lollipop-5-0-1-n915g-t3033073
Thread closed
malybru
Forum Moderator
Google has published the image here https://developers.google.com/android/nexus/images
Download link:
https://dl.google.com/dl/android/aosp/shamu-lyz28e-factory-b542b88a.tgz
Anyone tried this build on AT&T?
Flashed on Google play phone. I don't have LTE anymore on T-Mobile
helloworld1 said:
Flashed on Google play phone. I don't have LTE anymore on T-Mobile
Click to expand...
Click to collapse
I had to go in and select the correct APN again. It filled up with other ones as well and nothing was selected.
biggiestuff said:
I had to go in and select the correct APN again. It filled up with other ones as well and nothing was selected.
Click to expand...
Click to collapse
That fixed the issue. Thank you!
I take it I'll lose root if I update. If I do lose root how could I gain it back? I did a search and turned up with nothing of use.
OGMCVilleTC said:
I take it I'll lose root if I update. If I do lose root how could I gain it back? I did a search and turned up with nothing of use.
Click to expand...
Click to collapse
Use CF-Auto-Root. It works for me:
https://autoroot.chainfire.eu/
Mirrors please my download keeps failing
helloworld1 said:
Use CF-Auto-Root. It works for me:
https://autoroot.chainfire.eu/
Click to expand...
Click to collapse
Will it reset my device like it did the first time I rooted it?
OGMCVilleTC said:
Will it reset my device like it did the first time I rooted it?
Click to expand...
Click to collapse
No, it won't wipe your device.
I flashed the latest build on my Verizon device no issues. There isn't any ROM specific things for the nexus 6,. even though google says its tmobile only on their website. I think thats because maybe itllbe the only wifi calling supported ROM they release for the nexus 6.
Im on 5.1, root and custom recovery how to flash it without losing anything? Root or data. Can I use flashfire, select flash ota zip??
jeffrey81 said:
Im on 5.1, root and custom recovery how to flash it without losing anything? Root or data. Can I use flashfire, select flash ota zip??
Click to expand...
Click to collapse
In a DOS window with ADB and fastboot. Several tutorials are here on the board.
Btw. the radio is older than the Verizon build
tom1807 said:
In a DOS window with ADB and fastboot. Several tutorials are here on the board.
Btw. the radio is older than the Verizon build
Click to expand...
Click to collapse
LYZ28E (T-Mobile image) radio is MDM9625_104649.09.05.14R
LMY47D (Verizon OTA) radio is MDM9625_104446.01.02.98R
And the previous builds have even lower build numbers. Pretty sure the T-Mobile image/OTA radio is newer. Not that that makes it necessarily better, to be sure.
So this isn't specific to Tmobile? - Been waiting for this for AGES!!
brizey said:
LYZ28E (T-Mobile image) radio is MDM9625_104649.09.05.14R
LMY47D (Verizon OTA) radio is MDM9625_104446.01.02.98R
And the previous builds have even lower build numbers. Pretty sure the T-Mobile image/OTA radio is newer. Not that that makes it necessarily better, to be sure.
Click to expand...
Click to collapse
I can only judge by the filename
LYZ28E: radio-shamu-d4.01-9625-05.14+fsg-9625-02.93
LMY47I: radio-shamu-d4.0-9625-02.95
LMY47E: radio-shamu-d4.0-9625-02.98 (This was the Verizon Build)
LMY47D: radio-shamu-d4.0-9625-02.95
While the LMY47x Builds have a radio image of 83.4MB, the LYZ28E Radio is "only" 65.9MB
Not sure whether something missing or new compression algorithm
I'm just wondering where the open international images are at. Isn't very nexus for a us carrier to get them first.
imablackhat said:
I flashed the latest build on my Verizon device no issues. There isn't any ROM specific things for the nexus 6,. even though google says its tmobile only on their website. I think thats because maybe itllbe the only wifi calling supported ROM they release for the nexus 6.
Click to expand...
Click to collapse
I was wondering the same thing since all Nexus are the same. I am guessing that WiFi calling only works for T-Mobile so any other prepaid carrier that tries to use WiFi calling won't work, and since Google doesn't want any confusion they release it for only Tmo
Since I've been using it I haven't even seen a WiFi calling option
Sent from my Nexus 6 using XDA Free mobile app
imablackhat said:
Since I've been using it I haven't even seen a WiFi calling option
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I have my wifi calling settings as wifi preferred. You can change that by going to the more section under wireless & networks in your settings. Completely stock but rooted.View attachment 3334831
Just clicked check update, got the update!
1573.28MB SC1
It's out since February. ?
What region do you live in?
Daniesz said:
It's out since February.
What region do you live in?
Click to expand...
Click to collapse
Sprint my friend. US locked phone. this is the first s8 variant to get it here.
Daniesz said:
It's out since February.
What region do you live in?
Click to expand...
Click to collapse
I think he's referring to the US snapdragon models.
Yep, US Snapdragon S8+ for Sprint has been released. Finally a Snapdragon model! Maybe the rest of the models will follow. Not published on Sammobile yet but by using the SamFirm.exe, I was able to download Android Pie for the S8+ (Sprint version).
Just flashed the Sprint Pie firmware onto my TMobile phone (Odin). Everything seems to be working so far.
mperez19 said:
Just flashed the Sprint Pie firmware onto my TMobile phone (Odin). Everything seems to be working so far.
Click to expand...
Click to collapse
It could works in any Snapdragon variant even cdma on LTE(G955W~G955U1)
T0nyCr said:
It could works in any Snapdragon variant even cdma on LTE(G955W~G955U1)
Click to expand...
Click to collapse
Are you asking or telling?
Sprint update works fine in tmobile version of s8+along with all the t mobile apps.
Sent from my SM-G955U using Tapatalk
Hey guys I made a guide for flashing this Firmware onto a AT&T or Verizon S8/S8+ if anyone is interested.
https://forum.xda-developers.com/at...8-flashing-t3915872/post79212956#post79212956
Worked perfectly for me. Didn't wipe/reset my phone, and all my AT&T stuff is still working perfectly (Wi-Fi calling, VOLTE, Enhanced Messaging etc).
I don't want to receive the One UI update. How can I effectively disable my S8+ from receiv eing it ?
yycDAAN said:
I don't want to receive the One UI update. How can I effectively disable my S8+ from receiv eing it ?
Click to expand...
Click to collapse
Just don't proceed to update ?
S8+ on tmobile I installed the sprint update with the modded 3b Odin only two things to know first have the latest tmobile update downloaded from the updato firmware website so you can plug in the user data slot inn Odin with the tmobile one and second make sure you use csc home from the sprint update in the csc slot or you'll wipe your phone!
Got it last night on my GS8+ on ATT.
yycDAAN said:
I don't want to receive the One UI update. How can I effectively disable my S8+ from receiv eing it ?
Click to expand...
Click to collapse
kumayam said:
Just don't proceed to update ?
Click to expand...
Click to collapse
This can help others who do not want the receive the updated Interface / Android 9.0 Pie
under Settings >>> Developer Options >>> Auto Update System has been disabled.
under Settings >>> Software Update >>> Download Updates Automatically has been disabled.
This is the best option to prevent over night mandatory firmware updates that were common in the past.
yycDAAN said:
This can help others who do not want the receive the updated Interface / Android 9.0 Pie
under Settings >>> Developer Options >>> Auto Update System has been disabled.
under Settings >>> Software Update >>> Download Updates Automatically has been disabled.
This is the best option to prevent over night mandatory firmware updates that were common in the past.
Click to expand...
Click to collapse
Awesome, good to know ?
Hi guys looks like we have a new G981U1UEU1ATF1 being pushed to S20 devices.
I saw this on Sammobile last night, downloaded to one of my VMs overnight (free member download speeds around 500KB/S ugh!).
Installing now, actually finished first boot as I'm typing this...
Properties indeed show ATF1 now.
SM-G988U1 USA Unlocked here.
So if you're impatient and not going to wait for OTA, this is a safe bet.
Is there any difference in ATF1 vs ATE4 ?
Or are they basically the same?
I noticed the camera video stabilization has been fixed in ATF1
Now 5G able to be select on network mode.
Yes you are right now 5g band show up and can be selected.
farookh said:
Yes you are right now 5g band show up and can be selected.
Click to expand...
Click to collapse
How did you go to that menu? I downloaded the update but I am still unable to change network mode (no option) SM-G988U1 here.
Thank you!
Use the service menu code
*#2263#
What is the camera version on this one?
10.0.03.10
farookh said:
Use the service menu code
*#2263#
Click to expand...
Click to collapse
Mine says RAT Selection option is restricted :|
Any reason why?
xxxrichievxxx said:
Mine says RAT Selection option is restricted :|
Any reason why?
Click to expand...
Click to collapse
depends on carrier and csc also
farookh said:
10.0.03.10
Click to expand...
Click to collapse
Same as ATE6. Bummer.
I flashed this on my ATT S20 Ultra and to try to keep Wifi Calling, I flashed the most recent G988U CSC (i tried both Home and the regular CSC from that firmware) and unfortunately, when it booted up and I completed setup, I wolud always get FC's whenever I tried to use the Phone to make a call. I tried everything I could think of including doing a Factory Reset and nothing helped.
(I had done these exact same steps on previous versions of the firmware - (May, APril, etc) and I never had issues with the PHone apk like I am having this time.) Am I missing something ?