Need help here my SM-A520F Fail Install New Rom,
I've done Full Factory Reset, and Off my device and start on Download Mode, and I've allready download samsung driver, ODIN new version and ROM for my region
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Everythings i follow what on the tutorial, now my SM-A520F stuck on Boot Logo:crying::crying:
Use SmartSwitch or Kies's Emergency Recovery. I had mine fixed this way (A510F).
fyi
https://forum.xda-developers.com/samsung-a-series-2017
Same
I have the same Problem.
Anyone for Helppppp.
Related
Hey Everyone! Okay so here's what I got, I (very stupidly) Rooted my AT&T (I337) Galaxy S 4. Now that I was all fine until I used a flashing script (AS we have no custom recovery) to flash a "working" Google Wallet package. After I rebooted I would get "NCF Service as stopped responding". I managed to install SafeStrap but I couldn't seem to get anything there. SO I thought "Well let me just reflash to stock" so I tried KIES but KIES detects the latest firmware to be 4.2.2, AS we know it's not, and Samsung made MF3 rather impossible to downgrade. So I got the MF3 files used at BestBuy from here [http://forum.xda-developers.com/showthread.php?t=2502003]. So I put my phone into Download Mode, Open up ODIN and select the platform software in the PDA section and click start. Odin will start flashing and it goes almost all the way through but at the end I get the error FAIL! (Auth). I shall post the code below:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> persdata.img.ext4
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any help? :/
Hello,
So my brother's Galaxy S4 appeared the recieve the BSOD on his Galaxy S4 i9505. His screen was acting all wierd with colors and died on him. I've googled around and found out that flashing it to the 'I9505XXUDMHB_I9505PHNDMHB_I9505XXUDMHB_HOME.tar.md5' could fix it. The phone hasn't been rootted or flashed.
Now i do have a litle experience with flashing a phone and got all the files: Odin, USB drivers & an stock rom. But Odin keeps giving me the same auth error and i have really no clue what i can do to fix this. The message is this:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I've tried several versions of Odin, several USB ports and 2 different micro usb cabels. I've bought an JIG to be sure it enters the download mode and tried the button combination to launch it in download mode. But i keep getting this same fail message.
Does anyone knows how to fix this or can i just send the phone to Samsung for an RMA?
Thanks,
Thomas
What android version is the phone? 4.3? maybe the file you downloaded was 4.2(.2) version and you cant downgrade so you need to find a 4.3 version one I hope this helped you
KingOfDope said:
What android version is the phone? 4.3? maybe the file you downloaded was 4.2(.2) version and you cant downgrade so you need to find a 4.3 version one I hope this helped you
Click to expand...
Click to collapse
Thank you for your reaction. This does indeed explains it to me, i've been told at the phonestore i've been to that it has to do with an error in 4.3 and the only change to fix it was to downgrade it. Looks like i've to contact Samsung then.
guppie11 said:
Thank you for your reaction. This does indeed explains it to me, i've been told at the phonestore i've been to that it has to do with an error in 4.3 and the only change to fix it was to downgrade it. Looks like i've to contact Samsung then.
Click to expand...
Click to collapse
unfortunately yes you have to contact Samsung
So I had to re-install my firmware/ Operating system through odin because i accidentally deleted it. it worked, and i have my phone back again, but it seems im not able to root it again, I have tried rooting it again through kingo root and it gets stuck at waiting for device and then it says it failed. Then I tried through odin and it just resets my phone. this is the changelog from odin
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I got my stock rom to reinstall my firmware from galaxys4root.com/galaxy-s4-stock-firmware/ . Any ideas why i cant root my phone now?
I get this on Odin:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Model number of the phone?
spenzo said:
I get this on Odin:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
g900f same problem
What version of Odin you using?
medtouati said:
g900f same problem
Click to expand...
Click to collapse
Odin3 v3.10.6
Try to flash hidden.img only with odin. Worked for me a while ago.
You can extract the file via WinRar and make the .md5 file with Samsung toolkit.
Enviado desde mi SM-G928F mediante Tapatalk
Help! I have a Tab 4 SM-T530NN that I need the firmware for and I can't find a US copy anywhere. I tried a SM-T530NU version of the firmware and it mostly loaded. The MODEM.BIN part failed. The tablet boots and looks ready except it will not allow me turn on the WIFI, which I guess is due to the modem load failing. Any suggestions ?
this is the messages ODIN showed:
C:\Users\Jerry\Downloads\SM-T530NUUEU1BOE5_XAR_SERVICE_LP\AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1971 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> modem.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ttold12 said:
Help! I have a Tab 4 SM-T530NN that I need the firmware for and I can't find a US copy anywhere. I tried a SM-T530NU version of the firmware and it mostly loaded. The MODEM.BIN part failed. The tablet boots and looks ready except it will not allow me turn on the WIFI, which I guess is due to the modem load failing. Any suggestions ?
this is the messages ODIN showed:
C:\Users\Jerry\Downloads\SM-T530NUUEU1BOE5_XAR_SERVICE_LP\AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1971 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> modem.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I finally found a source that had a SM-T530NN firmware file, they had to pull it from their archives for me. all is good now, I have my Tab 4 working again. I just have to remember next time to check the battery level before starting a system restore. my bad....
ttold12 said:
I finally found a source that had a SM-T530NN firmware file, they had to pull it from their archives for me. all is good now, I have my Tab 4 working again. I just have to remember next time to check the battery level before starting a system restore. my bad....
Click to expand...
Click to collapse
I am having the same problem while installing LineageOS 18.1. Can you share the source for the firmware? I am having a really hard time finding this model number online.
Thanks in advance!