Hello I have the g935f global edition . I want to ask something . If i download and flash the firmware from the sammobile through the Odin then the phone will lost the Knox and will be lost the warrant as well ? My device is not rooted . The firmware is official UK BUT. I want to flash the Greece cosmote , If I flash a firmware from another country will cause a problem ? . I just want to reflash again the firmware , I just don't want to format the phone . If you are sure about what I am asking and you are sure that the know won't be change please let me know , is very important to me . I appreciate it !
The s7 edge runs on 7.0 latest version
StonebridgeGr said:
Hello I have the g935f global edition . I want to ask something . If i download and flash the firmware from the sammobile through the Odin then the phone will lost the Knox and will be lost the warrant as well ? My device is not rooted . The firmware is official UK BUT. I want to flash the Greece cosmote , If I flash a firmware from another country will cause a problem ? . I just want to reflash again the firmware , I just don't want to format the phone . If you are sure about what I am asking and you are sure that the know won't be change please let me know , is very important to me . I appreciate it !
The s7 edge runs on 7.0 latest version
Click to expand...
Click to collapse
As long as from official firmware, warranty will not be lost. Warranty lost if you install custom rom / recovery
#btw, you must choose home csc if you do not want to format the device. If you choose csc, then your phone will be like new
mashardpro said:
As long as from official firmware, warranty will not be lost. Warranty lost if you install custom rom / recovery
#btw, you must choose home csc if you do not want to format the device. If you choose csc, then your phone will be like new
Click to expand...
Click to collapse
Thank for the reply. I don't care if I lost all of my data . I just want to flash a Greek firmware . From factor the device had a UK firmware . Would be a problem if I flash a firmware from another country ? Also what is the CSC ?
StonebridgeGr said:
Thank for the reply. I don't care if I lost all of my data . I just want to flash a Greek firmware . From factor the device had a UK firmware . Would be a problem if I flash a firmware from another country ? Also what is the CSC ?
Click to expand...
Click to collapse
It does not matter if you flash other regions.
Well, not sure which language to say it. But there is an illustration like this..
If you download the firmware, you'll get these files:
PDA: System android
BL: Bootloader
CP: Radio
CSC: Region (your phone will be formatted if you choose this)
HOME CSC:Region (doesn't wipe your phone)
#cmiiw
mashardpro said:
It does not matter if you flash other regions.
Well, not sure which language to say it. But there is an illustration like this..
If you download the firmware, you'll get these files:
PDA: System android
BL: Bootloader
CP: Radio
CSC: Region (your phone will be formatted if you choose this)
HOME CSC:Region (doesn't wipe your phone)
#cmiiw
Click to expand...
Click to collapse
These files are inside of the firmware file right ?I don't understand what are these files and what's the problem. I have flash a firmware on s6 edge but It was more simple
StonebridgeGr said:
These files are inside of the firmware file right ?I don't understand what are these files and what's the problem. I have flash a firmware on s6 edge but It was more simple
Click to expand...
Click to collapse
Yes.
Make sure to insert the correct file into tab in odin. For example, PDA to PDA. BL to BL. As simple as that
mashardpro said:
Yes.
Make sure to insert the correct file into tab in odin. For example, PDA to PDA. BL to BL. As simple as that
Click to expand...
Click to collapse
Yes I think I only need to put the firmware on PDA or on BL I don't remember correct. I mean it's only one file . My last question is you sure that the warrant and the Knox wont be change ?
EDITED
Yes. It will not touch the knox warranty
mashardpro said:
Yes. It will not touch the knox warranty
Click to expand...
Click to collapse
Alright thank you for the reply. Also I want to ask you something else maybe you know how I can fix this annoying problem . When my phone is on a dark or very sunny place then the brightness change itself , the problem is not the auto brightness which is on the top bar , it's the light sensor . I downloaded a app from the google play that lets you test all your sensors, well when I put my fingers on the top of the phone where is the selfie camera then the brightness goes to very dark ... if I leave the fingers all good ... I tried many things but nothing changed . .. do you know any way to fix this idiot problem ? On google says that many users has this same problem as me , others not , a friend of me mine has the same mobile phone BUT not the same problem ...
StonebridgeGr said:
Alright thank you for the reply. Also I want to ask you something else maybe you know how I can fix this annoying problem . When my phone is on a dark or very sunny place then the brightness change itself , the problem is not the auto brightness which is on the top bar , it's the light sensor . I downloaded a app from the google play that lets you test all your sensors, well when I put my fingers on the top of the phone where is the selfie camera then the brightness goes to very dark ... if I leave the fingers all good ... I tried many things but nothing changed . .. do you know any way to fix this idiot problem ? On google says that many users has this same problem as me , others not , a friend of me mine has the same mobile phone BUT not the same problem ...
Click to expand...
Click to collapse
Well, i don't know about this issue
Related
Hello,
Firstly i searched the forum for a good answer but didn't find one. Sorry in advance if this question has been already answered and i didn't see the thread \ post.
I would like to change my firmware from 4.2.2 NB5 ORO CSC to 4.2.2 ND5 ( or the latest ) NEE CSC. Is that possbile via odin without changing my CSC ? I mean if i just flash it directly will it work ?
My phone is not rooted and i know that in order to change the CSC i have to rood it. My phone is also locked on my carrier, Orange.
Thank you and sorry if this is a repost of something similar.
fookea said:
Hello,
Firstly i searched the forum for a good answer but didn't find one. Sorry in advance if this question has been already answered and i didn't see the thread \ post.
I would like to change my firmware from 4.2.2 NB5 ORO CSC to 4.2.2 ND5 ( or the latest ) NEE CSC. Is that possbile via odin without changing my CSC ? I mean if i just flash it directly will it work ?
My phone is not rooted and i know that in order to change the CSC i have to rood it. My phone is also locked on my carrier, Orange.
Thank you and sorry if this is a repost of something similar.
Click to expand...
Click to collapse
You can flash the ROM without updating your CSC IF the AP file does not contain the CSC file. If the ROM does not specify in its name that it only includes XXX or YYY without any mention of CSC, then you're fine (Assuming you download from Sammobile). If it does say something related to CSC codes or there are 3 model numbers (different or not) on the file name, then it includes the CSC.
You don't need to root to change CSC. You need the Samsung dialer code + your IMEI number, which will factory reset your phone but change your CSC.
nicholaschum said:
You can flash the ROM without updating your CSC IF the AP file does not contain the CSC file. If the ROM does not specify in its name that it only includes XXX or YYY without any mention of CSC, then you're fine (Assuming you download from Sammobile). If it does say something related to CSC codes or there are 3 model numbers (different or not) on the file name, then it includes the CSC.
You don't need to root to change CSC. You need the Samsung dialer code + your IMEI number, which will factory reset your phone but change your CSC.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=28789
This is the ROM i wanted to flash. I'm not quite sure if it includes or not what you said. It should be NEE CSC so i think i can't flash it...right ? :-s
If i can't flash it, can you give me a link to an example firmware that i can flash, other than my stock ORO CSC rom ?
The dialer code + IMEI doesn't work for me. I tried * # 272 *IMEI # and it says the code is invalid. Maybe because i'm branded on Orange ?
fookea said:
http://www.sammobile.com/firmwares/3/?download=28789
This is the ROM i wanted to flash. I'm not quite sure if it includes or not what you said. It should be NEE CSC so i think i can't flash it...right ? :-s
If i can't flash it, can you give me a link to an example firmware that i can flash, other than my stock ORO CSC rom ?
The dialer code + IMEI doesn't work for me. I tried * # 272 *IMEI # and it says the code is invalid. Maybe because i'm branded on Orange ?
Click to expand...
Click to collapse
That is a full ROM. It includes everything - AP, CP and CSC.
I don't understand, do you just want to get rid of your ORO CSC ROM? You should be able to install your NEE ROM perfectly fine.
nicholaschum said:
That is a full ROM. It includes everything - AP, CP and CSC.
I don't understand, do you just want to get rid of your ORO CSC ROM? You should be able to install your NEE ROM perfectly fine.
Click to expand...
Click to collapse
Yes, i want to fully get rid of this ROM because updates on this CSC are so friggin slow it's driving me mad. I want to completly move to NEE ROM. So i can flash this ROM perfectly with the instructions on Sammobile in the link right ?
fookea said:
Yes, i want to fully get rid of this ROM because updates on this CSC are so friggin slow it's driving me mad. I want to completly move to NEE ROM. So i can flash this ROM perfectly with the instructions on Sammobile in the link right ?
Click to expand...
Click to collapse
You'll have to unlock your phone first on a website, then you're free to install any ROM from any country. If not it will still be locked to Orange.
nicholaschum said:
You'll have to unlock your phone first on a website, then you're free to install any ROM from any country. If not it will still be locked to Orange.
Click to expand...
Click to collapse
No problem about that, i am still gonna be on Orange anyway. I don't want to unlock it just want to get a different ROM with a newer build number so i can (probably) get away from this stupid battery drain.
fookea said:
No problem about that, i am still gonna be on Orange anyway. I don't want to unlock it just want to get a different ROM with a newer build number so i can (probably) get away from this stupid battery drain.
Click to expand...
Click to collapse
Give it a go, if you can't get it to work, just reflash your stock Orange.
The absolute worst thing that could happen is that KNOX would go 0x1, but you will still get your updates. If that happens, you should really just use custom ROMs, they're wonderful and updates more often.
nicholaschum said:
Give it a go, if you can't get it to work, just reflash your stock Orange.
The absolute worst thing that could happen is that KNOX would go 0x1, but you will still get your updates. If that happens, you should really just use custom ROMs, they're wonderful and updates more often.
Click to expand...
Click to collapse
I know about custom ROMs and i've been looking and them and i really wish i would have the gut to just screw my warranty but i can't do it just now. I've had some problems with my old Xperia Z and i'm lucky i had custom roms but on locked BL so i could claim my warranty. I can't even root it and it's just killing me but meh...
okay, i'll give it a go thanks for the advice and time spent answering to me ! Cheers !
fookea said:
Hello,
Firstly i searched the forum for a good answer but didn't find one. Sorry in advance if this question has been already answered and i didn't see the thread \ post.
I would like to change my firmware from 4.2.2 NB5 ORO CSC to 4.2.2 ND5 ( or the latest ) NEE CSC. Is that possbile via odin without changing my CSC ? I mean if i just flash it directly will it work ?
My phone is not rooted and i know that in order to change the CSC i have to rood it. My phone is also locked on my carrier, Orange.
Thank you and sorry if this is a repost of something similar.
Click to expand...
Click to collapse
I don't know how to answer your question but let me ask you... What is CSC and why you don't wanna change it ?
WandersonGD said:
I don't know how to answer your question but let me ask you... What is CSC and why you don't wanna change it ?
Click to expand...
Click to collapse
CSC is your region\carrier customization. It dictates what your updates are , what they contains and when you get them . I want to change it but i know ( i might be wrong about this ) that it's only possible via rooting, wich i can't do atm
OK so i flashed the NEE straight on my NB4 ORO firmware and it worked flawlessly.
So for everybody that is asking this: you can flash any full ROM with any CSC on top of any other CSC . This is my experience and i hope it goes well with you ! Good luck !
WandersonGD said:
I don't know how to answer your question but let me ask you... What is CSC and why you don't wanna change it ?
Click to expand...
Click to collapse
CSC is Customer Sales Code. You want to change it when you want to debrand/debloat your phone by removing carrier-specific apps or update it to another carrier's update stream (to get a different carrier's upgrades). It also allows for you to get correct APN values if your carrier's auto assign doesn't work properly.
You don't need root to change it, you need Odin and the CSC package. You can use the Samsung code + IMEI as a last resort.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
fookea said:
OK so i flashed the NEE straight on my NB4 ORO firmware and it worked flawlessly.
So for everybody that is asking this: you can flash any full ROM with any CSC on top of any other CSC . This is my experience and i hope it goes well with you ! Good luck !
Click to expand...
Click to collapse
Good job man! But you have to be aware, I did some research before you did it. It does not apply to all devices. As the Russian ORO and Nordic Countries are the "same" region, I automatically assumed you bought your device in Europe, hence you won't be region locked out of your device. If you had a Hong Kong device you will have to take account for your storage difference (whether its 16GB or 32GB) as ROMs are usually for the 32GB PIT (bootloader), and any flashing of other region based ROMs COULD brick your device.
nicholaschum said:
CSC is Customer Sales Code. You want to change it when you want to debrand/debloat your phone by removing carrier-specific apps or update it to another carrier's update stream (to get a different carrier's upgrades). It also allows for you to get correct APN values if your carrier's auto assign doesn't work properly.
You don't need root to change it, you need Odin and the CSC package. You can use the Samsung code + IMEI as a last resort.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
Good job man! But you have to be aware, I did some research before you did it. It does not apply to all devices. As the Russian ORO and Nordic Countries are the "same" region, I automatically assumed you bought your device in Europe, hence you won't be region locked out of your device. If you had a Hong Kong device you will have to take account for your storage difference (whether its 16GB or 32GB) as ROMs are usually for the 32GB PIT (bootloader), and any flashing of other region based ROMs COULD brick your device.
Click to expand...
Click to collapse
Nice find , thanks for pointing it out. I don't think I have a region lock, it didn't have any of the stickers that usually say it's region locked. But yea, my version is from Europe.
p.s. ORO is from Romania
fookea said:
Nice find , thanks for pointing it out. I don't think I have a region lock, it didn't have any of the stickers that usually say it's region locked. But yea, my version is from Europe.
p.s. ORO is from Romania
Click to expand...
Click to collapse
Ahh cool cool, I guess I looked over too quickly but on Sammobile it said there was a Russian ORO too
nicholaschum said:
Ahh cool cool, I guess I looked over too quickly but on Sammobile it said there was a Russian ORO too
Click to expand...
Click to collapse
I can only see SER and MGF CSC on sammobile . It doesn't matter anyway because it seems in the end it's ok to flash anything inside your region
fookea said:
I can only see SER and MGF CSC on sammobile . It doesn't matter anyway because it seems in the end it's ok to flash anything inside your region
Click to expand...
Click to collapse
That was embarrassing xD I just relooked and yeah you're right
It was a glance problem on my end. Sorry! But yeah it still applies
Hello @ all
Want to root my new note 3 and do all how it describe in the forum but failed.
Now i can´t get out of the odin mode and become with 3 different firmwares after system.img.ext4 failed
with kies have no chance to get a rescue...
had the newest firmware on it and tried a7 b3 and a4 ahso with pit files.
Can anybody can give me a tip what i can do?!?!
greetz
maikro
Maikrotex said:
Hello @ all
Want to root my new note 3 and do all how it describe in the forum but failed.
Now i can´t get out of the odin mode and become with 3 different firmwares after system.img.ext4 failed
with kies have no chance to get a rescue...
had the newest firmware on it and tried a7 b3 and a4 ahso with pit files.
Can anybody can give me a tip what i can do?!?!
greetz
maikro
Click to expand...
Click to collapse
to be frank..
nobody can help u.
so little info that u give.
1. what device?
2. which firmware u are on? give spesific firmware
3. what were u trying to do?
when u said try other firmware, what firmware? and how did u do?
Sent from somewhere under the sky, at the corner of this rounded earth.
re.
antique_sonic said:
to be frank..
nobody can help u.
so little info that u give.
1. what device?
2. which firmware u are on? give spesific firmware
3. what were u trying to do?
when u said try other firmware, what firmware? and how did u do?
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
galaxy note 3 SM-N9005
had the latest update don´t know exactly what but is an german telekom D1 Handy
i tryed to root the device with CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 and odin 3.0.7 and 3.0.9
Tryed
- N9005XXUENA7_N9005DTMENA2_DTM
- N9005XXUENB3_N9005OXXENB1_XEO
- N9005XXUENB4_N9005DBTENB1_DBT
every time it hang in odin at system.img.ext4
only the odin modus works and have ahso a message i must use kies to initialize the firmware but kies don't accept it to initialize.
hope u can help me out.....
thanks
Maikrotex said:
galaxy note 3 SM-N9005
had the latest update don´t know exactly what but is an german telekom D1 Handy
i tryed to root the device with CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 and odin 3.0.7 and 3.0.9
Tryed
- N9005XXUENA7_N9005DTMENA2_DTM
- N9005XXUENB3_N9005OXXENB1_XEO
- N9005XXUENB4_N9005DBTENB1_DBT
every time it hang in odin at system.img.ext4
only the odin modus works and have ahso a message i must use kies to initialize the firmware but kies don't accept it to initialize.
hope u can help me out.....
thanks
Click to expand...
Click to collapse
ok. stay calm. That's the 1st rule
I believe I can't ask you to check your about device, since you are stuck at ODIN mode already.
From what you are saying you are on latest Germany firmware, if I'm not wrong it should be ND3 Kitkat.
Did you try to root using the correct file of CF-Autoroot ? I mean did you use the correct file for the Kitkat N9005 version ?
Since now you are left with no other choice, I suggest you to download the same firmware of ND3 - DBT version again (if you still want to stick with germany firmware).
But if you want the latest one, you can try Singapore XSP NE4 (I'm not sure, but some users reported the NE4 XSP is not so good in dealing with GPS).
It's up to your choice mate. But if you are worry too much, you can just grab the ND3 - DBT (I'm not sure the germany this one still need the .PIT file or not), or any other Europe firmwares (try not to grab the provider branded firmware)
You can find this on samfirmware.com
Once you get already, you can use ODIN v.3.0.9 to flash.
Let it boot... if you stuck at the N9005 logo, power it off (or take out battery for few secs and put it back), and then press vol up + home + power to go into stock recovery, and then choose factory reset and wipe cache, and then reboot.
Btw,
Reason why you are not able to flash the firmwares you are listed above, is because you are on Germany last built (ND3) with the ND bootloader. It is not possible for you to flash earlier firmware with earlier bootloader.
Hope you understand my long explanation
feel free to PM me if you need more help.
cheers.
re.
antique_sonic said:
ok. stay calm. That's the 1st rule
I believe I can't ask you to check your about device, since you are stuck at ODIN mode already.
From what you are saying you are on latest Germany firmware, if I'm not wrong it should be ND3 Kitkat.
Did you try to root using the correct file of CF-Autoroot ? I mean did you use the correct file for the Kitkat N9005 version ?
Since now you are left with no other choice, I suggest you to download the same firmware of ND3 - DBT version again (if you still want to stick with germany firmware).
But if you want the latest one, you can try Singapore XSP NE4 (I'm not sure, but some users reported the NE4 XSP is not so good in dealing with GPS).
It's up to your choice mate. But if you are worry too much, you can just grab the ND3 - DBT (I'm not sure the germany this one still need the .PIT file or not), or any other Europe firmwares (try not to grab the provider branded firmware)
You can find this on samfirmware.com
Once you get already, you can use ODIN v.3.0.9 to flash.
Let it boot... if you stuck at the N9005 logo, power it off (or take out battery for few secs and put it back), and then press vol up + home + power to go into stock recovery, and then choose factory reset and wipe cache, and then reboot.
Btw,
Reason why you are not able to flash the firmwares you are listed above, is because you are on Germany last built (ND3) with the ND bootloader. It is not possible for you to flash earlier firmware with earlier bootloader.
Hope you understand my long explanation
feel free to PM me if you need more help.
cheers.
Click to expand...
Click to collapse
wow....thats a big help my friend!!!!
sit here for 6 hours and nobody in the german boring forums write.
Thank u for take time to explain this so i understand it right.
So i can go to wake up my handy now
great ....
Thanks for ya help...
greetz
maikro
Maikrotex said:
wow....thats a big help my friend!!!!
sit here for 6 hours and nobody in the german boring forums write.
Thank u for take time to explain this so i understand it right.
So i can go to wake up my handy now
great ....
Thanks for ya help...
greetz
maikro
Click to expand...
Click to collapse
sorry but the N9005XXUEND3_N9005PHNEND1_PHN that i have load from an site don´t work
were i can find it on sammobile? search for my device but no d3 firmware available.
i thought now its ok...but at the same line on odin failed......
download now this and try it....
PDA: N9005XXUEND3
CSC: N9005EUREND1
MODEM: N9005XXUENC2
something i make wrong or?!?!!?
Pm me
Sent from somewhere under the sky, at the corner of this rounded earth.
so i want to flash twrp in my S5 sm-g9009d , but im not sure if my model is supported , as it only says klte in twrp page (which i dont know if that's my device type , nor can i find any info about it :/ )
so what's the worst that can happen ?
Hi, Rinyumi ,
No, but there is red alert for all flash
You are lonely responsible of your fone
the Best way in this case hardbrick
In my idea is to flash last officiel
firmware or (stock rom )of your country with Odin
yanis488 said:
Hi, Rinyumi ,the Best way in this case
In my idea is to flash last officiel
firmware or (stock rom )of your country with Odin
Click to expand...
Click to collapse
there is no stock ROM for my country , the official firmwares are all chinese
that's why i need a custom recovery for backup , bcs i want to try and install another model's firmware ( sm-g900fd) for my (sm-g9009d )...which i dont know how it'll end up , and i deffinantly cant afford to hard bick my phone
Perhaps if You Read this :*xda-dev :
*Galaxy S 5 Q&A, Help & Troubleshooting
**Galaxy S5 Dual SIM [SM-G9009D] by*rankoradza
You will have an idea
yanis488 said:
Perhaps if You Read this :*xda-dev :
*Galaxy S 5 Q&A, Help & Troubleshooting
**Galaxy S5 Dual SIM [SM-G9009D] by*rankoradza
You will have an idea
Click to expand...
Click to collapse
thanks, i was able to open the 2ed sim card but i still cant get 3G
rinyumi said:
so i want to flash twrp in my S5 sm-g9009d , but im not sure if my model is supported , as it only says klte in twrp page (which i dont know if that's my device type , nor can i find any info about it :/ )
so what's the worst that can happen ?
Click to expand...
Click to collapse
rinyumi said:
there is no stock ROM for my country , the official firmwares are all chinese
that's why i need a custom recovery for backup , bcs i want to try and install another model's firmware ( sm-g900fd) for my (sm-g9009d )...which i dont know how it'll end up , and i deffinantly cant afford to hard bick my phone
Click to expand...
Click to collapse
hi
you can see your Phone Model if you enter it in Download Mode.
Flash a Wrong custom Rom will not hard brick your Phone.
every rom has a tool To check If the rom working With your rom or not and will not allow to do a flash if it is not for your model
if you want i stock rom you can use this
Model: SM-G900F
Model name: GALAXY S5
Country: United Arab Emirates
Version: Android 5.0
Changelist: 4920419
Build date: Mon, 18 May 2015 06:32:47 +0000
Product Code: XSG
PDA: G900FXXU1POEC
CSC: G900FOJV1POF1
https://xq55.app.box.com/s/m5x27z7l0c0neoqpxsvp9pz417orrr95
ahmedsaber20005 said:
hi
you can see your Phone Model if you enter it in Download Mode.
Flash a Wrong custom Rom will not hard brick your Phone.
every rom has a tool To check If the rom working With your rom or not and will not allow to do a flash if it is not for your model
if you want i stock rom you can use this
Model: SM-G900F
Model name: GALAXY S5
Country: United Arab Emirates
Version: Android 5.0
Changelist: 4920419
Build date: Mon, 18 May 2015 06:32:47 +0000
Product Code: XSG
PDA: G900FXXU1POEC
CSC: G900FOJV1POF1
https://xq55.app.box.com/s/m5x27z7l0c0neoqpxsvp9pz417orrr95
Click to expand...
Click to collapse
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
rinyumi said:
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
Click to expand...
Click to collapse
yes this right
give me your model Number form download mode
ahmedsaber20005 said:
yes this right
give me your model Number form download mode
Click to expand...
Click to collapse
sm-g9009d
rinyumi said:
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
Click to expand...
Click to collapse
rinyumi said:
sm-g9009d
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=SM-G9009D
see this
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
ahmedsaber20005 said:
http://samsung-updates.com/device/?id=SM-G9009D
see this
Click to expand...
Click to collapse
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
rinyumi said:
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
Click to expand...
Click to collapse
i don't know but i think your phone get a soft brick
try this app
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
check here... http://www.sammobile.com/firmwares/database/SM-G9009D/ all chinesse, but if you want install a rom from other device at least dont flash modem and bootloader, this will break all
ahmedsaber20005 said:
i don't know but i think your phone get a soft brick
try this app
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
Click to expand...
Click to collapse
thanks a lot , the app really helped , and now i can get even arabic on my phone ^_^
im thinking of letting my phone be , as much as im hating it , i really cant risk hard bricking
thank u so much for ur help , i really appreciate that u stayed all this long trying to help me
rinyumi said:
thanks a lot , the app really helped , and now i can get even arabic on my phone ^_^
im thinking of letting my phone be , as much as im hating it , i really cant risk hard bricking
thank u so much for ur help , i really appreciate that u stayed all this long trying to help me
Click to expand...
Click to collapse
Any time
Have a great day [emoji1]
Sent from my SM-G900F using Tapatalk
Fevax said:
check here... http://www.sammobile.com/firmwares/database/SM-G9009D/ all chinesse, but if you want install a rom from other device at least dont flash modem and bootloader, this will break all
Click to expand...
Click to collapse
isnt the bootloader and the modem included in the stock firmware file (downloaded from sammobile) ?
rinyumi said:
isnt the bootloader and the modem included in the stock firmware file (downloaded from sammobile) ?
Click to expand...
Click to collapse
Yeah are included, you have to extract the zip, remove the .md5 and extract again, and use only system.img... search you will find how to make flasheable by odin again
Fevax said:
Yeah are included, you have to extract the zip, remove the .md5 and extract again, and use only system.img... search you will find how to make flasheable by odin again
Click to expand...
Click to collapse
ok thank you so much , ill look for it
I bought my mobile from UAE and am using it in india. When i compare my s10 plus with s10 indian variant , s10 front camera quality far beter than my s10 plus.so i m planning to flash indian region os using odin and have some doubt on this. Please some one clear my doubts
1. Will knox service get tripped, if i flash indian os using odin.?
2. Is this issue occurs due to different region os or hardware fault
3. If knox gets tripped, will it be fixed later ?
Thanks
Doesnt trip knox if you flash a stock firmware
Player04 said:
Doesnt trip knox if you flash a stock firmware
Click to expand...
Click to collapse
Thanks for your reply, will i get OTA updates after installed my region firmware.?
Anyone please respond my question..am getting different answer from different tech sites. Some people are saying flash different region rom will affect the knox. Some of us telling, it wont. Please confirm it.
saravanan vs said:
Thanks for your reply, will i get OTA updates after installed my region firmware.?
Click to expand...
Click to collapse
Yes you will get OTA after flashing a stock firmware using Odin
Use the main CSC file (not the HOME-CSC) if changing region
I always enable OEM Unlock in developer options before attempting to change CSC with Odin (disable OEM Unlock again after you have completed flash to enable full security)
You can only flash a firmware file that matches your model Variant
E.g. you cannot flash 975F firmware to an 975U model etc
Finally be aware your phone will be wiped after the flash completes so backup everything before you start. Good luck
Thanks a lot for your reply. And i am not get your points about CSC...can you please explain little more
saravanan vs said:
Thanks a lot for your reply. And i am not get your points about CSC...can you please explain little more
Click to expand...
Click to collapse
Firmware for Odin flash contains 2 CSC files. The HOME_CSC file will NOT erase your device, the CSC one will. However as you are changing CSC code it is best to use the normal CSC file and allow your device data to be erased as it’s not a good idea to mix data and settings between different firmware
Hope this helps and good luck
Thanks for your reply
Hello everyone. I'm new here. I wanted to know if I can change my S7 edge (exynos) sm-g935fd firmware from UAE to India. I am currently on Oreo G935FXXS8ETCA Xsg which has bootloader 8 if I'm not wrong, but I want to install ins firmware G935FODD7ETA1 also Oreo which has bootloader 7 . Is this switch possible?
P.s. I want to change firmware bcoz I am not getting volte on my phone. I've tried a few things without any luck. And the only solution seems to be to change my CSC. Any help will be appreciated.
zeeshanattarwala said:
Hello everyone. I'm new here. I wanted to know if I can change my S7 edge (exynos) sm-g935fd firmware from UAE to India. I am currently on Oreo G935FXXS8ETCA Xsg which has bootloader 8 if I'm not wrong, but I want to install ins firmware G935FODD7ETA1 also Oreo which has bootloader 7 . Is this switch possible?
P.s. I want to change firmware bcoz I am not getting volte on my phone. I've tried a few things without any luck. And the only solution seems to be to change my CSC. Any help will be appreciated.
Click to expand...
Click to collapse
As far as I know you can't downgrade due to antirollback protection. I don't imagine switching firmwares would work very well at all
TheExploitedOne said:
As far as I know you can't downgrade due to antirollback protection. I don't imagine switching firmwares would work very well at all
Click to expand...
Click to collapse
It not a rollback technically it's more of a sideways move but I might be wrong. Is it because of the older bootloader on the firmware I want to switch to?
Thanks for the reply.
zeeshanattarwala said:
It not a rollback technically it's more of a sideways move but I might be wrong. Is it because of the older bootloader on the firmware I want to switch to?
Thanks for the reply.
Click to expand...
Click to collapse
If you attempt to switch your bootloader to an older version it can cause a hard brick putting the device into EDL mode but I do believe you can switch the system a bit
So there is no way to change the firmware? Is there any way I can get volte
zeeshanattarwala said:
So there is no way to change the firmware? Is there any way I can get volte
Click to expand...
Click to collapse
You should be able to swap the system partition and CSC to something else as long as your not in any kind of Android Verified Boot
I don't know what that is. But I've only been using stock ROMs from ota updates. My phone isn't rooted either. I just want to activate volte on my phone. I would really appreciate if you could help me.
Btw thanks for the prompt replies.
zeeshanattarwala said:
I don't know what that is. But I've only been using stock ROMs from ota updates. My phone isn't rooted either. I just want to activate volte on my phone. I would really appreciate if you could help me.
Btw thanks for the prompt replies.
Click to expand...
Click to collapse
You're absolutely welcome! I'll have a search around Google and maybe point you into the right direction. I'm sure there is a flashable firmware for Odin (combo-firmware) that enables this
EDIT:
Because your on an International chipset (Exynos) you can actually flash a custom OS which supports the Volte. Just ensure you've taken the steps to unlock the bootloader through the developer options in settings (enable OEM unlock)
Don't unlock your bootloader and dont root your phone
if something goes wrong the EFS patition will corrupt and you are on U8
U7 combination firmware is not available and we dont know when will it will be available
you have to download U8 rom and flash home csc from U7 INS (latest software available for India)
it will enable Volte on your phone
make sure to tick nand erase when flashing Autoboot and f.reset time
Tapas27s said:
Don't unlock your bootloader and dont root your phone
if something goes wrong the EFS patition will corrupt and you are on U8
U7 combination firmware is not available and we dont know when will it will be available
you have to download U8 rom and flash home csc from U7 INS (latest software available for India)
it will enable Volte on your phone
make sure to tick nand erase when flashing Autoboot and f.reset time
Click to expand...
Click to collapse
Unlocking and root have nothing to do with the EFS partition. Sounds like you may have did something like modifying it and caused data to be corrupt and you never kept a backup.
TheExploitedOne said:
Unlocking and root have nothing to do with the EFS partition. Sounds like you may have did something like modifying it and caused data to be corrupt and you never kept a backup.
Click to expand...
Click to collapse
once i root my device then after monts i decided to go back on stock
then after some monts i decided to try NFE 9.0 Black Diamond after that i get many errors and made a mistake
6 monts before i didn't know things now i know things like bl and opening and booting phone wihtout bl and many more
its the easiest method to get INS VOLTE on UAE Exynos Model
My phone is running smooth but efs is corrupted that makes S/N No. none and no network
Phone is dead from march
Lets hope for U7 and U8 combination firmware
Thanks for the help. Really
Volte used to work before the Oreo update. And won't a custom ROM trip my Knox? (I use secure folder). I recently tried to flash a stock ROM with modified CSC file to get volte working on my S6 g920f. But it didn't work. It tripped my Knox and now my short codes don't work and CSC shows blank. Calls work though. But no volte.
zeeshanattarwala said:
Thanks for the help. Really
Volte used to work before the Oreo update. And won't a custom ROM trip my Knox? (I use secure folder). I recently tried to flash a stock ROM with modified CSC file to get volte working on my S6 g920f. But it didn't work. It tripped my Knox and now my short codes don't work and CSC shows blank. Calls work though. But no volte.
Click to expand...
Click to collapse
You can wait for the INDIAN U8 STock and then flash it on your device with Home CSC which will surely enable volte
Remember With Nanderase f.reset time and auto reboot
Don't trip your knox i regret it!!
I would wait too if you trip Knox with a warranty then your SOL. If your lucky you won't be it's best to wait for the firmware
Well I am waiting till there is a stock firmware. But I don't think there will be an official update seeing as it's an old model phone and the official software support is only 2 or 3 years from the company. So fingers crossed. I might flash the ins version and try to make it work if I get a new phone and my S7 will become a spare.
And thanks for the help guys ?.
Now I'm thinking of flashing a custom ROM on my S6. Let's see ....
zeeshanattarwala said:
And thanks for the help guys ?.
Now I'm thinking of flashing a custom ROM on my S6. Let's see ....
Click to expand...
Click to collapse
I would it can increase the performance of the device and not cause an overheat. And you're absolutely welcome as well