Stuck hard in download mode g900f - Galaxy S 5 Q&A, Help & Troubleshooting

Please help
Im stuck. I wanted to flash with odin when my house blow a fuse..... im "so"lucky...
After that my phone boots showing the "samsung s5 powered..." for a fraction of a second and then download mode. It does the same thing regardless what i do with the buttons. eg not able to reach recovery.
So i tried to flash twrp with odin= stuck at the recovery.img
Tried with stock rom =stuck at aboot.
Tried different versions of files and odin.
It seems that regardless what file i try to flash odin stops at the firs file.
Only thing i managed to do is flash a pit file.
Is my phone bricked. Thanks in advance

pilboff said:
Please help
Im stuck. I wanted to flash with odin when my house blow a fuse..... im "so"lucky...
After that my phone boots showing the "samsung s5 powered..." for a fraction of a second and then download mode. It does the same thing regardless what i do with the buttons. eg not able to reach recovery.
So i tried to flash twrp with odin= stuck at the recovery.img
Tried with stock rom =stuck at aboot.
Tried different versions of files and odin.
It seems that regardless what file i try to flash odin stops at the firs file.
Only thing i managed to flash is pit file.
Is my phone bricked. Thanks in advance
Click to expand...
Click to collapse
I have the same problem with the download mode, but i couldn't do anything because my charging port is broken

sorry to hear that...
i hope there is a "guru" here who is able to help us...

pilboff said:
sorry to hear that...
i hope there is a "guru" here who is able to help us...
Click to expand...
Click to collapse
i hope it too

What were you flashing with Odin when your fuse blew? I need much greater detail. We're you stock flashing custom? Other way around? Flashing kernel? Bootloader? Going from lollipop to marshmallow or nougat? I can't really try to piece it together unless I'm able to visualize what's going on.
---------- Post added at 06:59 AM ---------- Previous post was at 06:48 AM ----------
Also in my experience if odin flashes a rom to your device and your device freezes at boot you flashed the wrong stock ROM. Get it from sammobile. You can't just flash any rom for your device. It needs to match. Carrier and firmware. If you were say on 6.0 you can't just go flash 4.4 or 5.0. it might not boot because 6.0 updated the bootloader. Mm and nougat use the same bootloader. You can however upgrade to 6.0 from an earlier version. I've got a feeling you were never installing the rom your phone was looking for to begin with. You probably wouldn't have been able to boot even if the fuse didn't blow. I say this because if it stopped mid way during a flash it would simply corrupt the install and another flash would fix the issue. If I wipe the rom from my s5 or it fails to boot my primary rom it boots right into recovery.
---------- Post added at 07:02 AM ---------- Previous post was at 06:59 AM ----------
Arabix.Sword said:
I have the same problem with the download mode, but i couldn't do anything because my charging port is broken
Click to expand...
Click to collapse
You will absolutely need your usb port if you can't get into recovery.

godkingofcanada said:
You will absolutely need your usb port if you can't get into recovery.
Click to expand...
Click to collapse
I know:good:, ill give it to a shop to replace the port

We'll, try to get in the Download Mode using the POWER+HOME+DOWN VOL. and not by the stuck Download Mode, i know you can, then try to flash a rom, preferably exact same or newer Android version.

Related

[Q] Set Warranty Bit : recovery

Hello, I am MrGovernor.
I have recently purchased a Galaxy Note 3 N9005 and decided to root it earlier today. The device is running on 4.3 because my carrier decide to delay their releases (O2).
About 2 hours ago I then decided to put a custom recovery on it before installing Omega ROM...
Now, me being a newb, I was following about 3 different tutorials at once; I managed to get to the final stage of using ODIN to flash CWM onto the phone (n9005-cwm-recovery-6.0.4.7-kk). Now, I did this and when my phone rebooted it got the initial loading screen and this message appeared:
RECOVERY BOOTING....
Click to expand...
Click to collapse
Set Warranty Bit : recovery
Click to expand...
Click to collapse
This happens when I go into Recovery Mode and when I boot normally. I can still go into download mode.
I am a newb, have I bricked my new phone or is there any way to salvage it?
Thanks a load!
MrGovernor.
MrGovernor said:
Hello, I am MrGovernor.
I have recently purchased a Galaxy Note 3 N9005 and decided to root it earlier today. The device is running on 4.3 because my carrier decide to delay their releases (O2).
About 2 hours ago I then decided to put a custom recovery on it before installing Omega ROM...
Now, me being a newb, I was following about 3 different tutorials at once; I managed to get to the final stage of using ODIN to flash CWM onto the phone (n9005-cwm-recovery-6.0.4.7-kk). Now, I did this and when my phone rebooted it got the initial loading screen and this message appeared:
This happens when I go into Recovery Mode and when I boot normally. I can still go into download mode.
I am a newb, have I bricked my new phone or is there any way to salvage it?
Thanks a load!
MrGovernor.
Click to expand...
Click to collapse
no its fine all n3 rooted will have that when and if you go back to stock it will go
jaythenut said:
no its fine all n3 rooted will have that when and if you go back to stock it will go
Click to expand...
Click to collapse
Thanks a load!
MrGovernor said:
Hello, I am MrGovernor.
I have recently purchased a Galaxy Note 3 N9005 and decided to root it earlier today. The device is running on 4.3 because my carrier decide to delay their releases (O2).
About 2 hours ago I then decided to put a custom recovery on it before installing Omega ROM...
Now, me being a newb, I was following about 3 different tutorials at once; I managed to get to the final stage of using ODIN to flash CWM onto the phone (n9005-cwm-recovery-6.0.4.7-kk). Now, I did this and when my phone rebooted it got the initial loading screen and this message appeared:
This happens when I go into Recovery Mode and when I boot normally. I can still go into download mode.
I am a newb, have I bricked my new phone or is there any way to salvage it?
Thanks a load!
MrGovernor.
Click to expand...
Click to collapse
it's normal
hhai2pth said:
it's normal
Click to expand...
Click to collapse
Now... Another issue...
I installed PhilZ Touch Recovery and that has worked fine...
However, I went full retard and 'Wiped System for a New ROM' before I made a backup...
I then tried to flash FoxHound ROM, I managed to get through the install process flawlessly, BUT, when the device rebooted it stays on the boot screen...
What can be done to fix this? As I failed to make a backup of my original 4.3 firmware...
Thanks Again!
MrGovernor said:
Now... Another issue...
I installed PhilZ Touch Recovery and that has worked fine...
However, I went full and 'Wiped System for a New ROM' before I made a backup...
I then tried to flash FoxHound ROM, I managed to get through the install process flawlessly, BUT, when the device rebooted it stays on the boot screen...
What can be done to fix this? As I failed to make a backup of my original 4.3 firmware...
Thanks Again!
Click to expand...
Click to collapse
Did u use correct ROM for 4.3? Did u tried flash stock rom again?
hhai2pth said:
Did u use correct ROM for 4.3? Did u tried flash stock rom again?
Click to expand...
Click to collapse
I can't find the 4.3 firmare... Only the 4.4.2 firmare...
I just realized I may have to flash with O2's stock firmare as it is an O2 device...
MrGovernor said:
Hello, I am MrGovernor.
I have recently purchased a Galaxy Note 3 N9005 and decided to root it earlier today. The device is running on 4.3 because my carrier decide to delay their releases (O2).
About 2 hours ago I then decided to put a custom recovery on it before installing Omega ROM...
Now, me being a newb, I was following about 3 different tutorials at once; I managed to get to the final stage of using ODIN to flash CWM onto the phone (n9005-cwm-recovery-6.0.4.7-kk). Now, I did this and when my phone rebooted it got the initial loading screen and this message appeared:
This happens when I go into Recovery Mode and when I boot normally. I can still go into download mode.
I am a newb, have I bricked my new phone or is there any way to salvage it?
Thanks a load!
MrGovernor.
Click to expand...
Click to collapse
oh man...
You are running 4.3, but you flash cwm for KK (4.4.2) ?
You should flash cwm for 4.3 instead.
Try to find the stock firmware, and reflash it.
Cheers!
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
MrGovernor said:
Now... Another issue...
I installed PhilZ Touch Recovery and that has worked fine...
However, I went full retard and 'Wiped System for a New ROM' before I made a backup...
I then tried to flash FoxHound ROM, I managed to get through the install process flawlessly, BUT, when the device rebooted it stays on the boot screen...
What can be done to fix this? As I failed to make a backup of my original 4.3 firmware...
Thanks Again!
Click to expand...
Click to collapse
if you have installed the ROM flawlessly and stuck at the boot screen, try go into recovery again and make a full wipe (but not the wipe for new rom). Then reboot.
But the custom ROM you are flashing is 4.3 also right ?
Because very simple, if you were on stock 4.3, and you flash custom ROM 4.4.2 without update your bootloader first to 4.4.2, the custom ROM won't run.
---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------
MrGovernor said:
I can't find the 4.3 firmare... Only the 4.4.2 firmare...
I just realized I may have to flash with O2's stock firmare as it is an O2 device...
Click to expand...
Click to collapse
if your device N9005, you may use any other firmware so long as for N9005.
You can try to flash 4.4.2, but you have to tick "update bootloader" at ODIN. Please note, once you are on 4.4.2, you are not able to go back to 4.3, due to different bootloader.
antique_sonic said:
oh man...
You are running 4.3, but you flash cwm for KK (4.4.2) ?
You should flash cwm for 4.3 instead.
Try to find the stock firmware, and reflash it.
Cheers!
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
if you have installed the ROM flawlessly and stuck at the boot screen, try go into recovery again and make a full wipe (but not the wipe for new rom). Then reboot.
But the custom ROM you are flashing is 4.3 also right ?
Because very simple, if you were on stock 4.3, and you flash custom ROM 4.4.2 without update your bootloader first to 4.4.2, the custom ROM won't run.
---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------
if your device N9005, you may use any other firmware so long as for N9005.
You can try to flash 4.4.2, but you have to tick "update bootloader" at ODIN. Please note, once you are on 4.4.2, you are not able to go back to 4.3, due to different bootloader.
Click to expand...
Click to collapse
That's cleared a load up! I'll install the 4.3 firmware and get back to you (Samsung's Firmware Download Servers are incredibly slow <,<)
yeah. good luck
Thanks for all the help!
I used ODIN to flash this file:
N9005XXUENB4_N9005O2UENB1_N9005XXUENB1_HOME.tar.md5
From SamMobile's Firmware.
It's all working now, and it on the 4.4.2 KitKat Built.
Does this mean the bootload has updated and I can install the 4.4 Omega ROM?
This time I will make a restore point on PhilZ Custom Recovery!
MrGovernor said:
Thanks for all the help!
I used ODIN to flash this file:
N9005XXUENB4_N9005O2UENB1_N9005XXUENB1_HOME.tar.md5
From SamMobile's Firmware.
It's all working now, and it on the 4.4.2 KitKat Built.
Does this mean the bootload has updated and I can install the 4.4 Omega ROM?
This time I will make a restore point on PhilZ Custom Recovery!
Click to expand...
Click to collapse
when you flash it, u did tick the update bootloader right ?
If yes, means you are now on the 4.4.2 bootloader, and you can install the 4.4 custom ROM (but please read the respective thread on how to flash that custom ROM of your choice)
And when you want to flash Philz CWM, do choose the one for 4.4.2. Try to use the latest one.
Good luck!
antique_sonic said:
when you flash it, u did tick the update bootloader right ?
If yes, means you are now on the 4.4.2 bootloader, and you can install the 4.4 custom ROM (but please read the respective thread on how to flash that custom ROM of your choice)
And when you want to flash Philz CWM, do choose the one for 4.4.2. Try to use the latest one.
Good luck!
Click to expand...
Click to collapse
Thanks!
But... On last problem...
I've downloaded and used ODIN to install PhillZ Recovery ("philz_touch_6.08.9-hltexx.tar.md5").
It passes in ODIN, and boots straight to android.
However, when I try to boot into recovery mode, I get the normal 3 lines of text, but after a few seconds it reboots back to android...
What do?
P.S: I tried holding down all 3 buttons through the whole process (that just reboots), holding down only the Home and Volume + buttons once the text appears (still reboots)... I've also tried to Re-Flash the same version twice.
I just want to make a backup for this ROM in-case I f*ck up with other ROMs. Sorry for being such a scrub!
------NOTE----------
Installed Latest Version of PhillZ, all works A-OK!
MrGovernor said:
Thanks!
But... On last problem...
I've downloaded and used ODIN to install PhillZ Recovery ("philz_touch_6.08.9-hltexx.tar.md5").
It passes in ODIN, and boots straight to android.
However, when I try to boot into recovery mode, I get the normal 3 lines of text, but after a few seconds it reboots back to android...
What do?
P.S: I tried holding down all 3 buttons through the whole process (that just reboots), holding down only the Home and Volume + buttons once the text appears (still reboots)... I've also tried to Re-Flash the same version twice.
I just want to make a backup for this ROM in-case I f*ck up with other ROMs. Sorry for being such a scrub!
------NOTE----------
Installed Latest Version of PhillZ, all works A-OK!
Click to expand...
Click to collapse
Sorry was bit busy.
But if you do read my last post... I did mentioned you have to use the latest one better
Cheers, mate!
btw :
why do you like to use KK recovery on 4.3, and when you are on KK, you use 4.3 recovery ?
Set warranty bit is different than set warranty kernel
jerryspring said:
Set warranty bit is different than set warranty kernel
Click to expand...
Click to collapse
And what exactly is the point of posting this in a 4.5 years old thread ?
Dejan Sathanas said:
And what exactly is the point of posting this in a 4.5 years old thread ?
Click to expand...
Click to collapse
Cuz I asked a question and no one answered me. What would be causing the bootloop on my phone? With stock and custom ROMs, it is bootlooping in and out of recovery and saying set warranty bit recovery ...
But no user has to answer you .
Post and if somebody sees it and has the answer they will .
But on the Q&A board as very few read it now and a day is not long enough.
JJEgan said:
But no user has to answer you .
Post and if somebody sees it and has the answer they will .
But on the Q&A board as very few read it now and a day is not long enough.
Click to expand...
Click to collapse
The o.p is different than my question! So, instead of making a duplicate thread with basically same issue, I posted in here.

Auto restart on logo

Hello, i have a samsung galaxy A5 that turns on goes to logo then restarts and goes to logo again continuously, also i cant get into recovery mode to format the phone. But i can go to download mode, can someone tell me how to fix this phone?
Thanks...
Can someone give me a recovery file for Galaxy a5 (model A500H) that I can flash with Odin to go into recovery mode?
Thanksgiving
Download and flash stock firmware from sammobile.com
I flashed with stock firmware version 5.1..1 from sammobile still same problem, I want to hard reset but can't go into recovery mode, any ideas?
Can anyone tell me how to enable the device to boot into recovery mode so I can factory set the phone?
andrew21 said:
I flashed with stock firmware version 5.1..1 from sammobile still same problem, I want to hard reset but can't go into recovery mode, any ideas?
Click to expand...
Click to collapse
The most recent version for the A500H is 5.0.2. Are you sute you flashed the correct firmware?
You can try to flash TWRP (the odin version) via odin.
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
http://www.sammobile.com/firmwares/database/SM-A500H/
Sorry my mistake I flashed with 5.0.2, flashed with recovery file via Odin still cannot boot into recovery mode, maybe I'm doing something wrong. I have the file "TWRP_2.8.7.0_LL_ODIN.tar.md5.gz". Should i flash this with odin or should i extract this file and flash with "recovery.tar.md5"?
Thanks
andrew21 said:
Sorry my mistake I flashed with 5.0.2, flashed with recovery file via Odin still cannot boot into recovery mode, maybe I'm doing something wrong. I have the file "TWRP_2.8.7.0_LL_ODIN.tar.md5.gz". Should i flash this with odin or should i extract this file and flash with "recovery.tar.md5"?
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982086992212
Do you have the correct samsung drivers on your pc? Does odin say added when you plug in your phone?
Did you extract the zip file you downloaded from sammobile? You should flash the tar. Md5 file.
jnvdh06 said:
https://www.androidfilehost.com/?fid=24269982086992212
Do you have the correct samsung drivers on your pc? Does odin say added when you plug in your phone?
Did you extract the zip file you downloaded from sammobile? You should flash the tar. Md5 file.
Click to expand...
Click to collapse
Odin says added when i connect the phone and i extracted the file i downloaded from sammobile....i flashed the recovery you gave me but still cannot boot into recovery mode, when i try i get red message ontop of the screen "recovery is not seandroid enforcing" and "Set warranty bit: recovery.. Any ideas?
I'm using ODIN v3.10.7 on Windows 10, could that be the problem?
Thats very odd. Usually if you flash new firmware everything would work fine.
---------- Post added at 07:28 PM ---------- Previous post was at 07:25 PM ----------
Did you load the firmware file in the AP/PDA option and only ticked auto reboot and f. Reset time
Yes I did as you said still getting problems, should I download another stock rom from sammobile, and can u suggest any specific ROM? Or should i flash a custom ROM from recovery? Please suggest
andrew21 said:
Yes I did as you said still getting problems, should I download another stock rom from sammobile, and can u suggest any specific ROM? Or should i flash a custom ROM from recovery? Please suggest
Click to expand...
Click to collapse
You can try firmware from another region. You wont be able to flash a rom of you don have recovery
jnvdh06 said:
You can try firmware from another region. You wont be able to flash a rom of you don have recovery
Click to expand...
Click to collapse
Well, i have rooted the phone and have recovery....do u suggest Stock ROM or custom ROM? If custom ROM can you suggest any one? Thanks.
Oh. I thought you said you dont have custom recovery. You can try and make stock based rom with Superr kitchen and flash that. http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296
jnvdh06 said:
Oh. I thought you said you dont have custom recovery. You can try and make stock based rom with Superr kitchen and flash that. http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296
Click to expand...
Click to collapse
Well, i flashed custom ROM but still same problem...phone just keeps on restarting????
andrew21 said:
Well, i flashed custom ROM but still same problem...phone just keeps on restarting????
Click to expand...
Click to collapse
Did you do a clean flash? Wipe system, data, cache, dalvik cache?
jnvdh06 said:
Did you do a clean flash? Wipe system, data, cache, dalvik cache?
Click to expand...
Click to collapse
Yes everything I did, I'm downloading files on wifi, could that be the problem?
andrew21 said:
Yes everything I did, I'm downloading files on wifi, could that be the problem?
Click to expand...
Click to collapse
What rom did you flash?
Downloading over wifi shouldnt be a problem. You can alway double check the md5 to see if it matches.
I flashed custom rom: CM-12.1-20151004-UNOFFICIAL-a53gxx

Is my phone's bootloader broken?

Hi!
Recently, my Galaxy Grand Prime was updated to Lollipop 5.0.2.
The specs are:
Model number: SM-G530H
Baseband version: G530HXXU2BPB2
Build number: LRX22G.G530HXXU2BPG2
I rooted it with ODIN v3.12 and CF-Auto-Root with MD5 d4c1bec4b68fa7a987d5cd86b19dd40e.
I booted into bootloader mode, connected with PC, was detected by ODIN, chose the file and flashed. Everything went smooth, and the Android was rooted successfully.
Afterwards, whenever I restart my phone, it directly boots into recovery mode. That was at least okay for me, as only clicking the power button once more.
But when I booted into bootloader mode, my phone isn't recognized on my PC!
Additionally, general bootloader mode icon seems like this, right?
i .ytimg. com/vi/orgfOE681mo/maxresdefault. jpg
But now, instead of the Android and Downloading, the icon has become like:
1.bp.blogspot.com /-njuQy90Au-o/VQyO9WLyrtI/AAAAAAAABEI/9BKXoajtfQw/s1600/Samsung%2BGalaxy%2BGrand%2BPrime%2Bhard%2Breset%2B(2). jpg
[I'm new user, so I can't post images or links. Plz remove the spaces.]
How can I fix this? Can Samsung Kies fix this issue?
Anyone help?
Shadow1024 said:
Anyone help?
Click to expand...
Click to collapse
Flash stock rom via odin and root with the file i.e here http://d-h.st/oqFc . how to root - flash it via odin. Then flash custom recovery
---------- Post added at 07:43 AM ---------- Previous post was at 07:42 AM ----------
Shadow1024 said:
Anyone help?
Click to expand...
Click to collapse
If phone not showing in odin then install samsung usb driver in pc. Let me know it worked or not .
However, previous time, I didn't unlock bootloader. Will it be a problem if I flash stock ROM and custom recovery?
I tried to unlock via
Code:
fastboot oem unlock
but stuck on waiting for devices. So, desperately, I flashed CF Auto Root.
Device is reset via Kies and now Odin recognizes it in bootloader mode. Should I continue?
I wish to downgrade to Kitkat 4.4.4 and the stock ROM from SamMobile is downloaded. It's hard to work with Lollipop as Xposed can't be installed normally.
Phew!!!
Got everything fixed!
Successfully flashed stock Kitkat ROM rooted with your provided file.
Everything alright; never felt so much relieved.
Thanks, bro!
Shadow1024 said:
Phew!!!
Got everything fixed!
Successfully flashed stock Kitkat ROM rooted with your provided file.
Everything alright; never felt so much relieved.
Thanks, bro!
Click to expand...
Click to collapse
Great. Have fun

Soft Brick??

Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?
Same issue as well on my sm-g985v Verizon variant
Flashed an update to work out minor lagging bugs and soft bricked my S7. Can access bootloader and recovery. Beyond that, the phone gets there but with black screen and it is sputtering off and on. Tried reflashing stock firmware with odin, and its not taking. Running into a permission error while trying to write the image. Anyone here have any ideas?
sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Feyaad said:
Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?
Click to expand...
Click to collapse
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...
sidi adam said:
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...
Click to expand...
Click to collapse
What rom you tried to flash?
Are you on the right bootloader and modem?
Well I have the Odin latest version already..but I can't know which is the correct baseband or county..only the model I know when it's in download mode..
sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
So you flashed a beta firmware, the name of which you don't feel is necessary information.
OK. Shame I hate popcorn. How about INFORMATION instead?!
LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...
I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc
Moodruid said:
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...
Click to expand...
Click to collapse
When downloading original firmware there should be 4 files when unzip.
1 for each of the options in Odin, without the last one named home.
Some of the custom roms comes with bootloader and modem, but NOT ALL.
Most times you have to flash the right bootloader and modem in Odin beforehand to get the phone to boot.
Im unsure of what has happened because I have never run into issues myself.
If you can not get the phone to boot with firmware from Sammobile and Odin flash I am out of options.
If I do experience a problem like this I would:
-install bootloader and modem according to the custom rom used. Try and flash these with odin more than ones, if not working.
-if no recovery, try flash recovery again
-try flash another custom rom then another custom rom
-return to stock firmware downloaded trough Sammobile
If none of these options work im out of things to do, sorry
The times I have experienced phone stuck on Samsung logo, it has been because of bootloader and/or modem.
Flashing the right ones have always fixed the problem.
That said, I have never experienced problems with returning to stock firmware trough Odin, maybe one time.
And this time my firmware download was corrupted.
---------- Post added at 06:13 AM ---------- Previous post was at 06:00 AM ----------
sidi adam said:
I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc
Click to expand...
Click to collapse
This is wrong, you should use the file named only CSC.
Home_CSC, is to keep your setup on phone as is.
I also remember that you have to remove the meta data directory, and then repack firmware or the install will stop.
And this is also NOT a good option if you use another firmware than the original on phone.
Installing firmware with Odin, always use BL, AP, CP and CSC.
Try this and forget about the Home_CSC.
I don't have anymore info, sorry
Thank you very much. I will try it. I will let you know.
Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,
Moodruid said:
Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,
Click to expand...
Click to collapse
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work
LyLu said:
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work
Click to expand...
Click to collapse
How will you get to turn on USB debugging when the phone can only booth into download model?
Feyaad said:
How will you get to turn on USB debugging when the phone can only booth into download model?
Click to expand...
Click to collapse
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button
LyLu said:
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button
Click to expand...
Click to collapse
OK great..will try it..thank you
luly said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
Even this thread is old:
Thank you so much, bricked my phone unknowingly flashing custom recovery using a defektive usb port struggling to get it working again. This worked like a charm.
DonĀ“t understand why the orthers did struggle with that method.

Stock recovery

Hi all. I'm in need of the stock recovery file for N910H on stock 6.0.1. Preferably in .tar format. Thanks
d_myke said:
Hi all. I'm in need of the stock recovery file for N910H on stock 6.0.1. Preferably in .tar format. Thanks
Click to expand...
Click to collapse
I believe that sammobile would have the stock rom, which if i remember correctly will automaticly flash stock recovery on flash.
But what problem do you have or why do you need a stock recovery, if i may ask ?
Diload said:
I believe that sammobile would have the stock rom, which if i remember correctly will automaticly flash stock recovery on flash.
But what problem do you have or why do you need a stock recovery, if i may ask ?
Click to expand...
Click to collapse
Flashed TWRP on my unrooted phone via Odin. Worked the first time round, and I was able to clear cache. Rebooted, and I've not been able to boot into recovery since. I can boot into download mode, but not recovery mode. Pressing the right buttons just boots up the phone normally. Haven't got root, so I can't use an app to boot into recovery.
d_myke said:
Flashed TWRP on my unrooted phone via Odin. Worked the first time round, and I was able to clear cache. Rebooted, and I've not been able to boot into recovery since. I can boot into download mode, but not recovery mode. Pressing the right buttons just boots up the phone normally. Haven't got root, so I can't use an app to boot into recovery.
Click to expand...
Click to collapse
Are you absolutely sure that you flashed the right version? I did the wrong version once since the website van be a bit confusing for some phones, a reflash with the right one with Odin saved me
I want to root my phone but it needs to install a custom recovery, if ever I want to get back the stock recovery...
Does flashing the stock rom replace the custom recovery with the stock recovery?
Sorry I'm a noob
Hi there
I didn't got everything but I'll try to help.
Get latest Odin : https://samsungodin.com/download/Odin3_v3.12.3.zip
Get a stock ROM: chose the right one for you
http://samsung-updates.com/device/?id=SM-n910h
or
https://samsung-firmware.org/model/SM-N910H/
or
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910H/
Get TWRP: https://eu.dl.twrp.me/treltexx/twrp-3.1.1-0-treltexx.img.tar.html
Get Magisk:
https://dl.xda-developers.com/4/4/2....zip?key=ZHiP_JZ9z3O4YQoq9ammlg&ts=1522485842
Flash stock ROM.
Flash TWRP. (Knox 0x1)
Boot to recovery and backup.
Flash Magisk in TWRP.
You'll end up with a rooted stock ROM and custom recovery
Hope this may help
Sent from my SM-N910F using XDA Labs
---------- Post added at 09:53 AM ---------- Previous post was at 09:50 AM ----------
zianfromPH said:
I want to root my phone but it needs to install a custom recovery, if ever I want to get back the stock recovery...
Does flashing the stock rom replace the custom recovery with the stock recovery?
Sorry I'm a noob
Click to expand...
Click to collapse
The short answer is YES.
Sent from my SM-N910F using XDA Labs
Thanks sir barlu
Another question, does flashing the stock rom ALONE make my phone stable and usable like a new one?
My phone is Note Edge SC-01G btw
I really wanted this phone to be rooted
zianfromPH said:
Thanks sir barlu
Another question, does flashing the stock rom ALONE make my phone stable and usable like a new one?
My phone is Note Edge SC-01G btw
I really wanted this phone to be rooted
Click to expand...
Click to collapse
Take care to get the right ROM or you could brick your phone! All I said above apply to N910H ONLY!
For your device: www.sammobile.com/firmwares/galaxy-note-edge/SC-01G/
Maybe another ROM would fit but you have to find out in the other threads...
Sorry if I can't help you more but there are too many differents versions
Sent from my SM-N910F using XDA Labs
Thank you sir

Categories

Resources