Hi! I'm from Turkey. I know little english, sorry.
I have got u8 smartwatch. mtk6260. But not working. I need firmware file
help
help
mertskyper said:
help
Click to expand...
Click to collapse
http://forum.xda-developers.com/smartwatch/other-smartwatches/u8-watch-white-screen-t2973426/page44
Look here, I have a similiar U8 clone but there are diferent kind of versions.
Its alott to read, I think if you go read from the back to front you might find an answer, or ask there.
(mine still works, just want to make a backup)
mertskyper said:
help
Click to expand...
Click to collapse
Maybe this will help?
ROM and Splitted ROM, ready to be installed.
Device: E-Boda Smart Time 100.
cristyrazvan said:
Maybe this will help?
ROM and Splitted ROM, ready to be installed.
Device: E-Boda Smart Time 100.
Click to expand...
Click to collapse
how to install ROM ?
mertskyper said:
how to install ROM ?
Click to expand...
Click to collapse
First of all, if your watch is working fine, don't install the new ROM unless you have a backup copy of the current ROM. My ROM might not be 100% compatible with your device and in this case you can reinstall the original firmware using the same steps listed below.
1. Download the attached SP_Flash_Tool_v5.1428.00.zip and extract it
2. Download splitted ROM zip file from my previous post and extract it in a new folder.
3. Go to the SP_Flash_Tool_v5.1428.00 folder and run Flash_tool.exe.
4. Click on ok if it says something about something not found, click on Scatter/Config file and select cat.cfg from the folder where you have extracted the Splitted ROM
5. Make sure to turn off the smartwatch, Click on "Download" in the program window and plug in the usb cable to the watch.
The operation should take about 2 minutes or less to complete, then a green circle will show up on the program and you can unplug the watch and start it up.
If everything is ok, the watch will boot up.
I hope this will help!
Please does anyone have the stock ROM file for apro q18 smart watch
Ola, Alguém tem a rom para o smartwatch Lg128? Tenho o meu relogio bloqueado.
Obrigado.
Is this ROM for the original U8? I have the original one for sure and I wanna update the firmware. (to make it look more stylish) anyone know where I can find the original U8 smartwatch custom ROMs?
Hi all,
the Crystal:
http://forum.xda-developers.com/smartwatch/other-smartwatches/zeblaze-crystal-smartwatch-t3177655
i have the ZeBlaze crystal and i couldn't find anywhere how to update it (mine has some SW bugs).
eventually i reached out to ZeBlaze and they sent me the update directly with instructions!
i haven't tested it yet since i have to get home to flash the watch.
here are the files they sent me, if anybody will get the chance to test it before i can and provide feedback that would be great.
i post the files as is and not responsible for anything in them.
https://www.dropbox.com/sh/3wrp85dv4uczxb9/AAAEMNj2NCb1tHtthyBln4sza?dl=0
have fun
i tried this from windows 8.1, after connecting the watch it identified as one-port usb but right after that it disconnected and identified as a storage device. i will try this later on windows 7 hoping it will work
tonyv82 said:
i tried this from windows 8.1, after connecting the watch it identified as one-port usb but right after that it disconnected and identified as a storage device. i will try this later on windows 7 hoping it will work
Click to expand...
Click to collapse
I advise try windows xp or 7.it always works for me on virtual box.
i have the same exact problem on windows 7. do you have a zeblaze watch? what driver are you using?
tonyv82 said:
Hi all,
the Crystal:
http://forum.xda-developers.com/smartwatch/other-smartwatches/zeblaze-crystal-smartwatch-t3177655
i have the ZeBlaze crystal and i couldn't find anywhere how to update it (mine has some SW bugs).
eventually i reached out to ZeBlaze and they sent me the update directly with instructions!
i haven't tested it yet since i have to get home to flash the watch.
here are the files they sent me, if anybody will get the chance to test it before i can and provide feedback that would be great.
i post the files as is and not responsible for anything in them.
https://www.dropbox.com/sh/3wrp85dv4uczxb9/AAAEMNj2NCb1tHtthyBln4sza?dl=0
have fun
Click to expand...
Click to collapse
hi again
i have a f2 chines smart watch that has same 2502 as crystal.
i tried this beautiful rom and unfortunately it was not fully compatible with my watch.the screen orientation was 180 different from touchscreen.it was fun.i was sliding up and pages went down.
i had same problem with flash tools and take this steps to overcome them
1. xp or win7 on virtualbox or vmware were not answering so i installed a fresh copy of win7
2. i have a few versions of sp flashtools but only the v5.1444.00.00 (provided one) was worked for me.
3. drivers was not the problem in my case . its was default com1 port of windows.disable that thing. sp flash tool see this one by default(why?!?!) and await for this port ignoring your watch enabled port (for me com5 and of curse yours might be different).
4. never forget backup your current firmware(you can find the guide here. believe me it saved my ass )
i wish you luck and i hope this would help you.
tonyv82 said:
Hi all,
the Crystal:
http://forum.xda-developers.com/smartwatch/other-smartwatches/zeblaze-crystal-smartwatch-t3177655
i have the ZeBlaze crystal and i couldn't find anywhere how to update it (mine has some SW bugs).
eventually i reached out to ZeBlaze and they sent me the update directly with instructions!
i haven't tested it yet since i have to get home to flash the watch.
here are the files they sent me, if anybody will get the chance to test it before i can and provide feedback that would be great.
i post the files as is and not responsible for anything in them.
https://www.dropbox.com/sh/3wrp85dv4uczxb9/AAAEMNj2NCb1tHtthyBln4sza?dl=0
have fun
Click to expand...
Click to collapse
Today I upgraded watch Zeblaze Crystal with firmware L10_C_CRYSTAL_128_T1_L2_C4_G10_B_20160201 . Everything works great.
YouTube
https://www.youtube.com/watch?v=hR0MkPsnoRM
Dropbox_firmware
https://www.dropbox.com/s/gy7j1xt7pzzy0s7/Zeblaze_Crystal_ firmware_update_6102201.rar?dl=0
Lep pozdrav
Predrag
:good:
vasic10 said:
Today I upgraded watch Zeblaze Crystal with firmware L10_C_CRYSTAL_128_T1_L2_C4_G10_B_20160201 . Everything works great.
YouTube
https://www.youtube.com/watch?v=hR0MkPsnoRM
Dropbox_firmware
https://www.dropbox.com/s/gy7j1xt7pzzy0s7/Zeblaze_Crystal_ firmware_update_6102201.rar?dl=0
Lep pozdrav
Predrag
:good:
Click to expand...
Click to collapse
what is the difference between the original zeblaze update and this one?
i see in the video that the startup screen doesn't say zeblaze
tonyv82 said:
what is the difference between the original zeblaze update and this one?
i see in the video that the startup screen doesn't say zeblaze
Click to expand...
Click to collapse
It's not true. See the video to the end.
i got this from zeblaze support yesterday, dont know if its the same:
http://en.mail.qq.com/cgi-bin/ftnEx...0446615b4764&t=exs_ftn_download&code=3390e4af
I can not download. After 1 min. interrupt transmission.
how long does the battery last?
mine barley holds one day
One to two days. If you only use the clock, even up to three days. Have you already download the firmware? If you, send me via Dropbox. Tomorrow I will tried to install.
I successfully upgrade my Zeblaze Crystal with firmware 0408, released 2016/03/26 . I have not seen anything new (only Siri, firmware 61022010).I miss the background for the menu (not already in the firmware 61022010) and new watch faces. Backgroud for watch face was better in firmware 61022010, now is again black . I'm a little disappointed with new update. I was expecting more. I will install back firmware 61022010.
Do you have a crystal email address? I tried to update mine and the screen is now blank
I want to email them but there's little support on their site
Sent from my LG-H850 using XDA-Developers mobile app
[email protected],
[email protected],
[email protected]
Follow the instructions.
ZEBLAZE CRYSTAL firmware_update_160201
Release time: 01/02/2016
Instructions for upgrading
https://www.youtube.com/watch?v=hR0MkPsnoRM
vasic10 said:
[email protected],
[email protected],
[email protected]
Follow the instructions.
ZEBLAZE CRYSTAL firmware_update_160201
Release time: 01/02/2016
Instructions for upgrading
https://www.youtube.com/watch?v=hR0MkPsnoRM
Click to expand...
Click to collapse
Brilliant!! Thanks
THe email addresses got me in touch with Jane
and the video (which added the formatting part i hadnt seen before!) has fixed it!!! MUCH CREDIT!
Hi, I found the two firmwares - L10_C_CRYSTAL_128_T1_L2_C4_G10_B_20160201 and L10_C_CRYSTAL_128_T1_L2_C4_G10_B_20160326. I have installed gradually, or which is better, and what it means?
Thanks
Firmware April 20
Here is the link to latest firmware which I downloaded
http://sz.ctfs.ftn.qq.com/ftn_handler/5fb6684cfda81632e7462ae2f4f381fe1acaa0eebf2ddac0a1874cc8e0695385770090e9489723b7a14fe9b24e38ac16e3a78eeb160c80584a1407acd69326c8/?fname=Crystal+firmware+update+-+0420.rar&k=68376632b2cbef998fa80d0c43380a4b06550256520c09541c55575606150c0650034b50015d0f495356040152080855080f0257651a3827434e15460454180258450b45044a5d4444470253115d18491107520055164a0543375b4632&fr=00&&txf_fid=5f23dd57448193f794a5688a9eec7436dfb22c94
Update its the same March 26th firmware. Uploading if someone is interested. Incoming calls I can view the name of contacts
Thanks, but probably does not work, you can put another link? What are the changes / news ?
Edit: I tried firmware 20160201 and 20160326, i see no difference. I do not see the name of the incoming caller outcoming ist O.K.
com port drivers link for Media Tek2502A chipset
drive.google.com/open?id=0B_5xThxaEfU6dUJZTG9oUzdaV1U
Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Please does anyone have the stock ROM file for apro q18 smart watch
Just what I need
eliseizla said:
Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Click to expand...
Click to collapse
Thanks for these tools.
eliseizla said:
Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Click to expand...
Click to collapse
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Update: just tried vxp on my DZ09 and its not a recognized file type
owie76 said:
Please does anyone have the stock ROM file for apro q18 smart watch
Click to expand...
Click to collapse
I am sorry... I do not have the firmware you want... you could try flashing the firmware I've posted, I don't guarantee it will work, unless your watch has a mt6260 or mt6260a processor... Good luck!
Feirbran said:
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Click to expand...
Click to collapse
I am sorry... I let everyone modify/edit/download the files I uploaded... And apparently, some arab mother****er restricted access and deleted the files from my drive... I will try and upload them again... I'll keep you posted!
Apps are back
Feirbran said:
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Click to expand...
Click to collapse
here you go!
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pMDVFTGFhNjFjU0E&usp=sharing
DZ09 Stuff repost
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
eliseizla said:
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
Click to expand...
Click to collapse
Thanks again for these, still no luck on my side. I was able to build a vxp using the tools you provided and was able to run it on the emulator however, its also not recognized on my DZ09. Btw, my DZ09 version summary when *#8375# is entered:
[VERSION] NX9-A_V2_1_K09B_T1_L3_C4_G4_B_20160225
[BRANCH]: 11CW135MP
GPLUS61A_11C_NX9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2016/02/25 14:35
[MRE VERSION] 3100
HAL_VERNO:
eliseizla said:
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
Click to expand...
Click to collapse
Hi eliseizla,
I cannot install any .vxp apps in your shared folder in my DZ09 watch What's wrong with my DZ09 ?
It could be many reasons... Mostly it could be your firmware version... try flashing the firmware i've uploaded... It's the best stable firmware, which doesn't have camera error, and works with the apps I've posted... If this doesn't work, then probably your smartwatch is fake... That's my opinion... I have the same firmware, the one that I've uploaded... It also has modified watchfaces, (black watchfaces, not blue or grey...). But anyway... what's the error that doesn't let you install? Is it simply not recognizing the file? or is it displaying ,,Application failed to start" message?
genergabasa said:
Thanks again for these, still no luck on my side. I was able to build a vxp using the tools you provided and was able to run it on the emulator however, its also not recognized on my DZ09. Btw, my DZ09 version summary when *#8375# is entered:
[VERSION] NX9-A_V2_1_K09B_T1_L3_C4_G4_B_20160225
[BRANCH]: 11CW135MP
GPLUS61A_11C_NX9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2016/02/25 14:35
[MRE VERSION] 3100
HAL_VERNO:
Click to expand...
Click to collapse
Yeah, I thought so... mine didn't work either... there seems to be something wrong with the mre version of the watch, I think... or probably the nonstandard resolution, maybe? Probably not, since it runs most of 176x210 apps (or smthg like that)... I've googled every bit of it, and yandexed it, and baidu'd it, still couldn't find anything about mre 3.1 version... Anyway, keep up the good work... you might figure out someday, who knows? I mean, I've tried, I am no programmer (yet), but I'm not giving up yet... right now, I am testing a lot of apps from wapka.mobi, to see wich ones work, and wich ones don't... I'll keep u posted with apps and info... Have a nice day!
eliseizla said:
Yeah, I thought so... mine didn't work either... there seems to be something wrong with the mre version of the watch, I think... or probably the nonstandard resolution, maybe? Probably not, since it runs most of 176x210 apps (or smthg like that)... I've googled every bit of it, and yandexed it, and baidu'd it, still couldn't find anything about mre 3.1 version... Anyway, keep up the good work... you might figure out someday, who knows? I mean, I've tried, I am no programmer (yet), but I'm not giving up yet... right now, I am testing a lot of apps from wapka.mobi, to see wich ones work, and wich ones don't... I'll keep u posted with apps and info... Have a nice day!
Click to expand...
Click to collapse
Thanks for the reply, yeah I agree. can you also post your version summary so I can cross check with other firmwares? I just bricked mine today but luckily there's alot of firmwares uploaded here and got my exact version Also please post the ones that worked on your device so I can also check on mine.
genergabasa said:
Thanks for the reply, yeah I agree. can you also post your version summary so I can cross check with other firmwares? I just bricked mine today but luckily there's alot of firmwares uploaded here and got my exact version Also please post the ones that worked on your device so I can also check on mine.
Click to expand...
Click to collapse
well, pretty much none, except the one i've posted... I was on niezarmsan's blog (u can google it) where u can find a lot of firmwares, but 80% of them have camera error, and they're all old, all from 2015, none from 2016... ;( then I found this one :
[version]
HX_106KA_S1_LANGA
[BRANCH]
11BW1308MP X9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME]
2015/09/06 09:40
[MRE VERSION] 3100
HAL_VERNO:
etc.
but it also seems to be old, unfortunately... Can you please send me the link or upload the firmware u found?(the one from 2016), please?
eliseizla said:
well, pretty much none, except the one i've posted... I was on niezarmsan's blog (u can google it) where u can find a lot of firmwares, but 80% of them have camera error, and they're all old, all from 2015, none from 2016... ;( then I found this one :
[version]
HX_106KA_S1_LANGA
[BRANCH]
11BW1308MP X9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME]
2015/09/06 09:40
[MRE VERSION] 3100
HAL_VERNO:
etc.
but it also seems to be old, unfortunately... Can you please send me the link or upload the firmware u found?(the one from 2016), please?
Click to expand...
Click to collapse
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
genergabasa said:
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
Click to expand...
Click to collapse
ur da best!
genergabasa said:
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
Click to expand...
Click to collapse
Ur firmware seems to pe in .php format... How should I open it?
eliseizla said:
Ur firmware seems to pe in .php format... How should I open it?
Click to expand...
Click to collapse
rename it to .rar and extract it
Im trying to install pdf reader
First : i put teh .vpx on external memory sd card because is too big for the internal memory of the watch. Well i put it on the sd card and i tried to opened but it do anything , the only option i have is Send/New Folder/Rename/Delete/Sort by/Copy/Move/Details. Then i dont know what to do. can you help me.
second: i have twitter and facebook , how can i access to the memory where they are installed , i want to erase them and put the pdf reader .
can anyone please help me?