Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Please does anyone have the stock ROM file for apro q18 smart watch
Just what I need
eliseizla said:
Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Click to expand...
Click to collapse
Thanks for these tools.
eliseizla said:
Found some stuff for developing/modifying Nucleus OS based mt6260 / mt6260a Smartwatches and thought I should share them with u guyz...
Links:
1. Mediatek MRE SDK (found it on a russian website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pMU5sY0tfMUpScVE/view?usp=sharing"
2.ADS 1.2 (found it on a chinese website )
"https://drive.google.com/file/d/0B_cMYtUOJZ1pT0lFd3Y3dHRZdk0/view?usp=sharing"
3. Some 240x240 .vxp apps, Resource Editor and Watchfaces, a clean DZ09 firmware with engineer mode/ test mode,
serial writer number (for lost imei), ReadBack extractor, and MAUI META... (not sure what it is, but might be useful...)
"https://drive.google.com/folderview?id=0B_cMYtUOJZ1pWHFhQ1Eta0xNTEU&usp=sharing"
Ok, so I've googled a lot, and I DID find some Info about these smartwatches...
They all have the same processor, the mt6260, and they are running Nucleus OS...
(SDK not free :crying You can install apps in mre's .vxp format but even though there are tons of .vxp apps, most of them are incompatible because of the resolution... (most of them are in 240x320 res or higher, and our smartwatches use 240x240)
Because of the small number of compatible apps, (curently only Facebook, Pdf reader, word reader, and power point reader work for me...) I decided to make my own apps... (will make)
You can create your own .vxp apps with the tools I gave you... U will need MRE SDK, ADS 1.2, and Microsoft Visual 2008... Good luck!
Anyway, sorry for the long post, and enjoy the content.. :laugh::good:
Sorry, I can't add links on xda, so please copy the text and paste in url bar...
Click to expand...
Click to collapse
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Update: just tried vxp on my DZ09 and its not a recognized file type
owie76 said:
Please does anyone have the stock ROM file for apro q18 smart watch
Click to expand...
Click to collapse
I am sorry... I do not have the firmware you want... you could try flashing the firmware I've posted, I don't guarantee it will work, unless your watch has a mt6260 or mt6260a processor... Good luck!
Feirbran said:
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Click to expand...
Click to collapse
I am sorry... I let everyone modify/edit/download the files I uploaded... And apparently, some arab mother****er restricted access and deleted the files from my drive... I will try and upload them again... I'll keep you posted!
Apps are back
Feirbran said:
Hello, I was searching for a PDF reader for my DZ09 smartwatch and I found your post but I can't enter the google drive folder that you linked, can you please link it again cause I really need that vxp apps
Ty so much!
Click to expand...
Click to collapse
here you go!
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pMDVFTGFhNjFjU0E&usp=sharing
DZ09 Stuff repost
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
eliseizla said:
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
Click to expand...
Click to collapse
Thanks again for these, still no luck on my side. I was able to build a vxp using the tools you provided and was able to run it on the emulator however, its also not recognized on my DZ09. Btw, my DZ09 version summary when *#8375# is entered:
[VERSION] NX9-A_V2_1_K09B_T1_L3_C4_G4_B_20160225
[BRANCH]: 11CW135MP
GPLUS61A_11C_NX9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2016/02/25 14:35
[MRE VERSION] 3100
HAL_VERNO:
eliseizla said:
https://drive.google.com/folderview?id=0B_cMYtUOJZ1pQl82NVVGdkNaVTQ&usp=sharing
Here you can find all stuff that's been deleted by that idiot...
If anyone has worked with mre vxp apps before, feel free to share some info... Good luck!
Click to expand...
Click to collapse
Hi eliseizla,
I cannot install any .vxp apps in your shared folder in my DZ09 watch What's wrong with my DZ09 ?
It could be many reasons... Mostly it could be your firmware version... try flashing the firmware i've uploaded... It's the best stable firmware, which doesn't have camera error, and works with the apps I've posted... If this doesn't work, then probably your smartwatch is fake... That's my opinion... I have the same firmware, the one that I've uploaded... It also has modified watchfaces, (black watchfaces, not blue or grey...). But anyway... what's the error that doesn't let you install? Is it simply not recognizing the file? or is it displaying ,,Application failed to start" message?
genergabasa said:
Thanks again for these, still no luck on my side. I was able to build a vxp using the tools you provided and was able to run it on the emulator however, its also not recognized on my DZ09. Btw, my DZ09 version summary when *#8375# is entered:
[VERSION] NX9-A_V2_1_K09B_T1_L3_C4_G4_B_20160225
[BRANCH]: 11CW135MP
GPLUS61A_11C_NX9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2016/02/25 14:35
[MRE VERSION] 3100
HAL_VERNO:
Click to expand...
Click to collapse
Yeah, I thought so... mine didn't work either... there seems to be something wrong with the mre version of the watch, I think... or probably the nonstandard resolution, maybe? Probably not, since it runs most of 176x210 apps (or smthg like that)... I've googled every bit of it, and yandexed it, and baidu'd it, still couldn't find anything about mre 3.1 version... Anyway, keep up the good work... you might figure out someday, who knows? I mean, I've tried, I am no programmer (yet), but I'm not giving up yet... right now, I am testing a lot of apps from wapka.mobi, to see wich ones work, and wich ones don't... I'll keep u posted with apps and info... Have a nice day!
eliseizla said:
Yeah, I thought so... mine didn't work either... there seems to be something wrong with the mre version of the watch, I think... or probably the nonstandard resolution, maybe? Probably not, since it runs most of 176x210 apps (or smthg like that)... I've googled every bit of it, and yandexed it, and baidu'd it, still couldn't find anything about mre 3.1 version... Anyway, keep up the good work... you might figure out someday, who knows? I mean, I've tried, I am no programmer (yet), but I'm not giving up yet... right now, I am testing a lot of apps from wapka.mobi, to see wich ones work, and wich ones don't... I'll keep u posted with apps and info... Have a nice day!
Click to expand...
Click to collapse
Thanks for the reply, yeah I agree. can you also post your version summary so I can cross check with other firmwares? I just bricked mine today but luckily there's alot of firmwares uploaded here and got my exact version Also please post the ones that worked on your device so I can also check on mine.
genergabasa said:
Thanks for the reply, yeah I agree. can you also post your version summary so I can cross check with other firmwares? I just bricked mine today but luckily there's alot of firmwares uploaded here and got my exact version Also please post the ones that worked on your device so I can also check on mine.
Click to expand...
Click to collapse
well, pretty much none, except the one i've posted... I was on niezarmsan's blog (u can google it) where u can find a lot of firmwares, but 80% of them have camera error, and they're all old, all from 2015, none from 2016... ;( then I found this one :
[version]
HX_106KA_S1_LANGA
[BRANCH]
11BW1308MP X9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME]
2015/09/06 09:40
[MRE VERSION] 3100
HAL_VERNO:
etc.
but it also seems to be old, unfortunately... Can you please send me the link or upload the firmware u found?(the one from 2016), please?
eliseizla said:
well, pretty much none, except the one i've posted... I was on niezarmsan's blog (u can google it) where u can find a lot of firmwares, but 80% of them have camera error, and they're all old, all from 2015, none from 2016... ;( then I found this one :
[version]
HX_106KA_S1_LANGA
[BRANCH]
11BW1308MP X9
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME]
2015/09/06 09:40
[MRE VERSION] 3100
HAL_VERNO:
etc.
but it also seems to be old, unfortunately... Can you please send me the link or upload the firmware u found?(the one from 2016), please?
Click to expand...
Click to collapse
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
genergabasa said:
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
Click to expand...
Click to collapse
ur da best!
genergabasa said:
No problem, here the link to the firmware for my device http://sharewidget.org/forum_xda-developers/attachment.php?attachmentid=3724413&d=1461095227 and here's a link to collections of firmwares for wearables like ours https://drive.google.com/folderview?id=0B_hRh3DjuBoeblBsakZfUWFCeGM&usp=sharing
Click to expand...
Click to collapse
Ur firmware seems to pe in .php format... How should I open it?
eliseizla said:
Ur firmware seems to pe in .php format... How should I open it?
Click to expand...
Click to collapse
rename it to .rar and extract it
Im trying to install pdf reader
First : i put teh .vpx on external memory sd card because is too big for the internal memory of the watch. Well i put it on the sd card and i tried to opened but it do anything , the only option i have is Send/New Folder/Rename/Delete/Sort by/Copy/Move/Details. Then i dont know what to do. can you help me.
second: i have twitter and facebook , how can i access to the memory where they are installed , i want to erase them and put the pdf reader .
can anyone please help me?
Hallo,
Just got my y1 and I want to know if I can do something like change watch faces etc?
Or any other fun stuff to mess with.
Thank you
crazyavak said:
Hallo,
Just got my y1 and I want to know if I can do something like change watch faces etc?
Or any other fun stuff to mess with.
Thank you
Click to expand...
Click to collapse
Try searching for ways to install app in DZ09 smartwatch i think it works using the same firmware
Hi i try it but the smartwatch cant open vxp format
What should i do for it?i should flash it?
it would be nice if you can share your watch rom , as some guys allready look out for the y1 rom, including me
bt: neve flash a watch / phone w/o backup.
Actually if everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
nova910 said:
Actually if everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
Click to expand...
Click to collapse
Flashtool and Flash Guide:
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
oxatools said:
Flashtool and Flash Guide:
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
Click to expand...
Click to collapse
Thanks for the help.
Hey. Just a heads up from me. I got myself a Y1 Smartwatch in the mail today. (Roughly 13€ from wish)
It seems to be the new 2018 version. The "Version Summary" I got through entering the code " *#8375#" into the dialer says following:
Code:
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V01.385-20180421
[BRANCH] 11C UMEOX61D_BT_11C
[BUILD TIME] 2018/04/21 11:46
[MRE VERSION] 3100
I still have to figure out how to connect the watch to my computer via USB, so far I haven't had any luck, not even with the MTK drivers for those common china watches. Nothing even happened at all when connecting to the computer, watch only charges, doesn't matter if turned on or off. Maybe there's a way to turn on USB debugging on the watch somehow? Let me know if you know something for that.
Once I manage to connect the device I'll happily dump the firmware for you.
duke1102 said:
Hey. Just a heads up from me. I got myself a Y1 Smartwatch in the mail today. (Roughly 13€ from wish)
It seems to be the new 2018 version. The "Version Summary" I got through entering the code " *#8375#" into the dialer says following:
Code:
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V01.385-20180421
[BRANCH] 11C UMEOX61D_BT_11C
[BUILD TIME] 2018/04/21 11:46
[MRE VERSION] 3100
I still have to figure out how to connect the watch to my computer via USB, so far I haven't had any luck, not even with the MTK drivers for those common china watches. Nothing even happened at all when connecting to the computer, watch only charges, doesn't matter if turned on or off. Maybe there's a way to turn on USB debugging on the watch somehow? Let me know if you know something for that.
Once I manage to connect the device I'll happily dump the firmware for you.
Click to expand...
Click to collapse
I just got mine a couple of days ago. My Version Summary says:
Code:
[VERSION] K13-COB-Y1-IPS7789BOE-BDYD-ZH-V06.563-20180507
[BRANCH] 11C UMEOX61D_BT_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2018/05/07 17:07
[MRE VERSION] 3100
HAL_VERNO:
I downloaded the MTK Flash Tool stuff but I haven't tried it yet.
Please let us know if you make any headway or discoveries!
Question
Hi,
Did you managed this?You can install other watchfaces to this??
watzone69 said:
I just got mine a couple of days ago. My Version Summary says:
Code:
[VERSION] K13-COB-Y1-IPS7789BOE-BDYD-ZH-V06.563-20180507
[BRANCH] 11C UMEOX61D_BT_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2018/05/07 17:07
[MRE VERSION] 3100
HAL_VERNO:
I downloaded the MTK Flash Tool stuff but I haven't tried it yet.
Please let us know if you make any headway or discoveries!
Click to expand...
Click to collapse
Does the Y1 have other names? And does it use VXP watch faces? Thanks
mman1982 said:
Hi,
Did you managed this?You can install other watchfaces to this??
Click to expand...
Click to collapse
No, I gave up and bought the Ticwatch E.
I may try and experiment with this Y1 and see what I can do.
y1
hello all
i have also a y1 smart watch and need more watch faces any help.
XML_61D_MRC_COB_K13D_W104_B_TN_201701107_V5.1041
hi
got a y1 smartwatch and the screen just stopped responding. Is there a way out of this??
Trying to have motion sensor work. I have tried many different ways to show the time. Only pressing the side button works.
I purchased this smart watch
Lifelike Y1 from snapdeal not take in warranty ...
Problem is that during make/received call watch goes turn off
Now i am looking for the firmware
Link of my smart watch :https://m.snapdeal.com/product/life-like-y1-smart-watches/630599633607
Hi everyone,
I'm searching firmware for my smartwatch (I think it is A1) with chip MT6260MA. I formatted the NOR flash space and flashed wrong firmware. So now I bricked two of these A1 watches without backing up the old firmware listed below.
I've got this smartwatch here:
https://joom.app.link/EJ4Dv9KxbS
[VERSION] MX6M-COB-A1-9307BOE-QCY-GL6133-SGW-V03.91-20180920
[BRANCH] BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2018/09/20 10:09
[MRE VERSION] 3100
HAL_VERNO:
And here are some informations about the watch by FlashTool v5.1308.00.00:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[WINBOND] W25Q32BV" (226)
Size = 0x00300000 (3MB/24Mb)
Please help me. I have to unbrick two A1 watches. Can anyone make a backup of his firmware and uses the same as mine?
Thank you very much!
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
ab-silvas said:
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
Click to expand...
Click to collapse
Can you share/upload your rom to me please?
Since now I didn't found a compatible rom for my watch. I don't know where to search now.
droidmanuser said:
Can you share/upload your rom to me please?
Since now I didn't found a compatible rom for my watch. I don't know where to search now.
Click to expand...
Click to collapse
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
ab-silvas said:
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
Click to expand...
Click to collapse
Thank you.
Maybe someone can help me to extract this rom dump? I've tried readback extractor mtk 2.0 and 2.4, but it said error invalid file
Has anyone a alternative working firmware for mt6260ma? Or can make a backup/readback file of his watch?
Thanks!
ab-silvas said:
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
Click to expand...
Click to collapse
Your Readback is corrupted
please make a new one and upload
i can make you all needed files
oxatools said:
Your Readback is corrupted
please make a new one and upload
i can make you all needed files
Click to expand...
Click to collapse
That would be very nice @ab-silvas
The copy of a running smartwatch, maybe the same readback and bought along with mine. Maybe ReadBack comes to this kind of mtk
Still need firmware or readback file for MT6260MA
Please help me.
droidmanuser said:
Still need firmware or readback file for MT6260MA
Please help me.
Click to expand...
Click to collapse
I'm a complete newbee. I've bought a DZ09 clone smartwatch. I don't like the stock firmware. Internet not working. No way to make internet settings. Virtual on-screen keyboard too small. In rest everything is working. I've decided to flash a new firmware, but first i knew I had to create a Readback ROM Dump or ROM Backup for it just in case I flash it with a non-functional firmware and need to revert back to old self. I took it apart to see the IC inside. It has a MEDIATEK ARM MT6260MA chip, a RDA 6625 Quad-Band GSM Wireless Communication chip and a BF6871A1 1.44 inch Touch Screen Digitizer chip. On the board there is a label "MX9-MB-V6.2". Downloading the drivers for the smartwatch and the flashtool was child-play. The hard part was to find a working scatter/config file for the read back to work (within the flash tool software). The smartwatch doesn't respond to usual *#8375# to show up the firmware version. Probably because it's a cheap clone? However there's another obscure code *#3721# which does it. It says: [VERSION]: Q9_60M_240_DZ09_GC6133_CUST_9_9307_1016 [BRANCH]: 11BW1308MP_141108 U8. Then by dialing another non-standard obscure code *#0101# says in a menu it's MRE [VERSION]:3100 [BUILD TIME]: 2018/10/16 and other stuff. Digging deep I've managed to found a working scatter/config file within the ROM file I've downloaded from here https: / / w w w .needrom.com/download/smartwatch-x6-pcb-mx9-mb-v3-5/#. It's a ROM version Q9 61D SWD EU RHF NEW SIX 6123 V3 5 20170214 for a Smartwatch X6 PCB “MX9-MB-V3.5″. I've successfully created the ROM file and then using the Readback Extractor mtk 2.4.exe I've rebuilt the original firmware. I haven't had the chance to test it and hopefully I won't have to. Maybe my stock firmware for MT6260MA might be useful for someone out there: https: / / drive.google.com/file/d/1X5ZeQeR_a9c25Omi3xd4ZYgJhx0vKi1q/view?usp=sharing
niculaegeorge said:
I'm a complete newbee. I've bought a DZ09 clone smartwatch. I don't like the stock firmware. Internet not working. No way to make internet settings. Virtual on-screen keyboard too small. In rest everything is working. I've decided to flash a new firmware, but first i knew I had to create a Readback ROM Dump or ROM Backup for it just in case I flash it with a non-functional firmware and need to revert back to old self. I took it apart to see the IC inside. It has a MEDIATEK ARM MT6260MA chip, a RDA 6625 Quad-Band GSM Wireless Communication chip and a BF6871A1 1.44 inch Touch Screen Digitizer chip. On the board there is a label "MX9-MB-V6.2". Downloading the drivers for the smartwatch and the flashtool was child-play. The hard part was to find a working scatter/config file for the read back to work (within the flash tool software). The smartwatch doesn't respond to usual *#8375# to show up the firmware version. Probably because it's a cheap clone? However there's another obscure code *#3721# which does it. It says: [VERSION]: Q9_60M_240_DZ09_GC6133_CUST_9_9307_1016 [BRANCH]: 11BW1308MP_141108 U8. Then by dialing another non-standard obscure code *#0101# says in a menu it's MRE [VERSION]:3100 [BUILD TIME]: 2018/10/16 and other stuff. Digging deep I've managed to found a working scatter/config file within the ROM file I've downloaded from here https: / / w w w .needrom.com/download/smartwatch-x6-pcb-mx9-mb-v3-5/#. It's a ROM version Q9 61D SWD EU RHF NEW SIX 6123 V3 5 20170214 for a Smartwatch X6 PCB “MX9-MB-V3.5″. I've successfully created the ROM file and then using the Readback Extractor mtk 2.4.exe I've rebuilt the original firmware. I haven't had the chance to test it and hopefully I won't have to. Maybe my stock firmware for MT6260MA might be useful for someone out there: https: / / drive.google.com/file/d/1X5ZeQeR_a9c25Omi3xd4ZYgJhx0vKi1q/view?usp=sharing
Click to expand...
Click to collapse
Thank you so much!
I'll try this out soon.
Backup original
Olá, postei um backup original para você no site needrom:
h t t p s :// w w w .needrom.com/download/original-rom-a1-mt6260/
se não tiver registro no site pode baixar do meu drive:
h t t p s :// drive.google.com/drive/folders/1g3eErhHwYgE_dPfQqn5PYwqUasZwWiH-?usp=sharing
conserta o link retirando espaços para abrir
pierresjm said:
Olá, postei um backup original para você no site needrom:
h t t p s :// w w w .needrom.com/download/original-rom-a1-mt6260/
se não tiver registro no site pode baixar do meu drive:
h t t p s :// drive.google.com/drive/folders/1g3eErhHwYgE_dPfQqn5PYwqUasZwWiH-?usp=sharing
conserta o link retirando espaços para abrir
Click to expand...
Click to collapse
Hi,
thank you very much, but this firmware is also not working. It's not able to flash, I think it is too large.
v8 firmware
ab-silvas said:
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
Click to expand...
Click to collapse
same to me with V8 MTK6260MA need rom,cant extract from working watch "binary and invalid file" and cant find rom,please help me
Problems with Mt6260MA and 3072 KiloByte ROM
I also need ROM for MT6260MA.
I have a GT08-Clone with MT6260MA and only 3072 KiloByte ROM. I made a mistake by Read Back, the Length has to be set to 0x00300000, i failed to make a Backup Next Problem is, that the Readback Extraktor is not able to read a ROM with just 3072 KiloByte. Anyway, someone managed, because there is an extracted MT6260MA-ROM with that Size on needrom (ROM DZ09 – mt6260ma). With that ROM I get the Switch-On-Melody, but the Screen is only white..
My original Firmware was x9mb_1.1_cst716a_mjw_gt08_xrm7789_lx9307_xf3029_6153_6133_j_a_v1.0.4 build somewhen end of 2019.
But it had no Browser, so i tried to change it.
Hopefully someone has a Solution..