Hi All,
I am using a moto e3 power and is now stuck in the boot menu with the moto logo after I tried a hard reset from the recovery menu.
Post this, I have tried to copy the customer rom available in firmware.com in the mmc and use the stock recovery options to flash the rom which didn’t work. I have tried to flash the rom using SP tools however that didn’t work as well.
Please suggest any other I can get the problem fixed. I am not sure how to install TWRP as the phone is not booting into the main menu. I have looked for help in the threads available as well as in google, however the above methods are the only one that were available and have tried them as well.
Please let me know in case you require any more information and I will share them accordingly.
SJ
sjstays said:
Hi All,
I am using a moto e3 power and is now stuck in the boot menu with the moto logo after I tried a hard reset from the recovery menu.
Post this, I have tried to copy the customer rom available in firmware.com in the mmc and use the stock recovery options to flash the rom which didn’t work. I have tried to flash the rom using SP tools however that didn’t work as well.
Please suggest any other I can get the problem fixed. I am not sure how to install TWRP as the phone is not booting into the main menu. I have looked for help in the threads available as well as in google, however the above methods are the only one that were available and have tried them as well.
Please let me know in case you require any more information and I will share them accordingly.
SJ
Click to expand...
Click to collapse
visit bit.ly/motoE3p
hi, once again, tried installing TWRP and i am getting this error screen. currently the device is going through a boot loop. please check the picture that i have attached and let me know if there is any solution to this.
Related
Hi! I have a bricked ZTE Libra (Sapo A5 in Portugal) and no mather how much I search for solutions I only seem to make things worse, so I was hoping someone here could help me.
Things started to go wrong after flashing a CyanogenMod rom. Everything worked except two things: I couldn't use anything that required my SIM card (so no phone or messaging) and I could not access the recovery screen (clockworkmod).
Without the recovery screen, I turned to ROM Manager but since it uses clockworkmod to do its work it didn't help.
Then I started trying other ways to recover my phone, until I tried ADB which allowed me a shell in my android. But then I broke it all by doing "wipe system" which cleaned my system of everything that was still working and left me with an expensive brick.
Now all I can do is boot until I see the green droid. If I don't press the volume buttons it goes into "device" mode and I can see it listed under "adb devices" but have no idea what to do with it.
If I press the volume button down to go into recovery mode it keeps flashing but never really goes anywhere.
If I press it up to go into the bootloader it stays the same and the only thing I can use to tell me something is different than the normal mode is that lsusb reports the vendor as "Google Inc." instead of what it reports in normal mode: "ONDA Communication S.p.A.".
With this I'm not even sure if I can get to the bootloader or not, but even if that is the bootloader, I have no idea what to do with it that might help me recover my phone.
By the way, I'm trying all this on Linux, although I could try solutions in Windows if required.
Can anyone tell me what can I do in this situation?
Ok, maybe my first post wasn't that easy to answer, so I'll make a simpler question to see if someone can help me.
What can be done at my android's bootloader? What is it for and what tools do I need to use to do it?
You could try installing ClockworkMod recovery using wbaw's guide here http://forum.xda-developers.com/showthread.php?t=1319257 Once that's installed you should be able to flash a new rom with it.
In bootloader mode you can flash a new kernel or recovery image using fastboot.
If you follow that guide that I wrote & Amphoras linked to then you should be able to get a working clockworkmod installed and then you can use that to flash a working rom, or restore a backup.
Thank you both, I'll try what you said as soon as I can and then I'll let you know if it worked!
Ladies and gentleman, today a miracle happened, my ZTE came back from the dead!
Apparently the problem was that I installed some GEN2 applications on my GEN1 model.
I found this while reading the tutorial you suggested, after which I upgraded my ZTE to GEN2 which allowed me to slowly recover everything else.
So, I have to say, thank you very much, and I hope I won't need your help again anytime soon! xD
kinda of a new at this. basically my tablet boots with asus logo and top left says "the device is UnLocked"
tried to flash cyanogen mod and put some wrong files.
i know its bricked but cant do much. Vol- + Pwr doesnt get me anywher
Vol+ + Pwr makes some recognition on my computer but cant do much. like fastboot wont recognize as a device.
pls help\
UPDATE: Got it to go in APX mode. and got drivers installed. dont know whats next...
thanks in advance
Few questions first... (I am an Android n00b, but have had issues and flashed custom ROMs about 9 times now.)
Did you make sure to see if the device was properly detected in your OS of choice beforehand? Installed all the software to do so?
Did you install either CWM or TWRP to the device?
Make a recovery in case of issue?
I followed the topic (in this very forum) about flashing. I had some issues being new and all, but got it right... BEFORE I did an actual flash.
[GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
I am using the latest TWRP instead of the guides CWM advice. Due to CWM failing to create a backup for me. I felt not having a backup plan, was something similar to going to a redlight district without a rubber. Which means... What if something goes wrong, how will I fix it?
Does the device detect? Can you move files to the device from your computer?
techknewz1 said:
kinda of a new at this. basically my tablet boots with asus logo and top left says "the device is UnLocked"
tried to flash cyanogen mod and put some wrong files.
i know its bricked but cant do much. Vol- + Pwr doesnt get me anywher
Vol+ + Pwr makes some recognition on my computer but cant do much. like fastboot wont recognize as a device.
pls help\
UPDATE: Got it to go in APX mode. and got drivers installed. dont know whats next...
thanks in advance
Click to expand...
Click to collapse
Hey there, just curious as to how you managed to 'put some wrong files', what exactly did you do to achieve this?
If you can still get into recovery and you have fastboot hooked up, you can proceed to either:
re-flash the correct CWM version if your recovery is broken, or
upload the CyanogenMod package you want to install to your device and simply wipe & flash!
I don't recommend installing last week's nightlies, rotation is still broken. Not sure as to what version last worked.
Good luck!
Xynergy said:
Hey there, just curious as to how you managed to 'put some wrong files', what exactly did you do to achieve this?
If you can still get into recovery and you have fastboot hooked up, you can proceed to either:
re-flash the correct CWM version if your recovery is broken, or
upload the CyanogenMod package you want to install to your device and simply wipe & flash!
I don't recommend installing last week's nightlies, rotation is still broken. Not sure as to what version last worked.
Good luck!
Click to expand...
Click to collapse
So here is what happened. Basically i tried flashing files and put it for the wrong tablet. Now i can only get into apx mode and fastboot doesnt recognize it and neither does adb recognize it.
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
So I have tried recently to flash my a6000 using a custom rom because lollipop update is horrible, laggy as hell. Somewhere in the process something went wrong, so my phone is soft bricked now. I have tried many several methods found on this forum, but none seems to work. I'm getting slowly desperate. The last one I'm trying currently is method using QFIL, but the problem is I get a code 52 error when I look up in the device manager.
"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
What can I do? Also if you know a method that will work 100% to unbrick my phone I would really appreciate it.
whitee10 said:
I got a code 52 error when I look up in the device manager.
What can I do? Also if you know a method that will work 100% to unbrick my phone I would really appreciate it.
Click to expand...
Click to collapse
If you want to Install Unsigned drivers WATCH THIS.
Well, the easiest method would be to flash any new rom through recovery, ofcourse only if you can boot into it. And yeah...have you flashed the TWRP recovery earlier. ..? If not, flash the latest TWRP recovery first using Fastboot.
If you have installed it earlier, To boot into recovery press VOL UP + VOL DOWN along with the POWER KEY and release the POWER KEY once the LENOVO logo shows up.
Then, wipe the cache, data, system, dalvik and then flash a new rom. All done...!!!
Thank you for your reply.
Anyaway I tried again to disable driver signature enforcement and it fixed the problem, code 52 gone.
Among all the methods and trying to unbrick my phone the last one with QFIL worked for me, also very easy to use. My phone is now back to 4.4.4.
My ZTE Blade AF3 (T221) can't boot into fastboot nor normal mode (so I could use adb). I can only use recovery mode. I tried to flash the stock firmware through apply update option, but the latest available firmware online is 1.0.4 and the recovery is on 1.0.5 (DIS_RU_QB18D_P731A20V1.0.5). That wouldn't be a problem if the update-script didn't check for the version of the current firmware and abort the installation because it's newer. I tried to delete the checking code from the script, but then the file verification check fails. I didn't find an option to turn that check off and I can't flash a custom recovery due to the lack of fastboot mode.
There is also another mode to which it can go into if I just let it boot without pressing any buttons. The ZTE logo appears, then disappears and the white screen remains. In Device Manager it's identified as "Gadget Serial". I don't know if I could use it somehow.
Is there anything I could do to flash the stock ROM or another recovery to the device?
Thanks for help!
Edit: If someone knows a method to boot into fastboot other than holding down the volume - key and plugging in the USB cable the advice is more than welcome, I just think I tried every kind of button combinations (although I wouldn't have guessed myself the process to go into recovery mode, so there's always the chance).
You already solved it? Maybe i can help you!
codeblvnc said:
You already solved it? Maybe i can help you!
Click to expand...
Click to collapse
Nope, I abandoned it. I even wrote to ZTE support, but they said I should wait for the newer firmware to be uploaded to the site (which I kept checking for a while, but nothing happened, so I eventually stopped). I haven't used that phone since, it now lives in the bottom of a drawer somewhere .
If you have any tips, I can try to make it work, but it's not that important anymore, so don't bother if it's too much work.
geiszla said:
Nope, I abandoned it. I even wrote to ZTE support, but they said I should wait for the newer firmware to be uploaded to the site (which I kept checking for a while, but nothing happened, so I eventually stopped). I haven't used that phone since, it now lives in the bottom of a drawer somewhere .
If you have any tips, I can try to make it work, but it's not that important anymore, so don't bother if it's too much work.
Click to expand...
Click to collapse
I had this phone, i need to check but have some firmwares in my personal computer. I will try make a easy-understanding tutorial to you