rooting lineage os custom ROM on sm-g361h - Samsung Galaxy Core Prime Questions & Answers

Hi, I recently installed the lineage 14.1 os and Gapps on my phone but now I'm having trouble rooting it. I tried rooting it with Kingoroot but it reboots on 90%. So I googled it and apparently I need to flash the SuperSU zip file. So I rebooted in recovery and tried flashing the zip. It didn't want to flash at first because the zip verivication was on so I turned it off and the flash said successful. But it didn't work. Can someone help me rooting my phone?

unknowncath said:
Hi, I recently installed the lineage 14.1 os and Gapps on my phone but now I'm having trouble rooting it. I tried rooting it with Kingoroot but it reboots on 90%. So I googled it and apparently I need to flash the SuperSU zip file. So I rebooted in recovery and tried flashing the zip. It didn't want to flash at first because the zip verivication was on so I turned it off and the flash said successful. But it didn't work. Can someone help me rooting my phone?
Click to expand...
Click to collapse
Lineage os is prerooted you can enable root from developer settings

Related

Phones boots into recovery every single time after flashing. [SM-A500F]

Hi guys, I faced some trouble while installing xposed with my galaxy A500F.
Here are the problem, my phone keep on boot into recovery (twrp) when i flashed any zip files except the root file recommended by this thread. http://forum.xda-developers.com/samsung-a-series/development/recovery-samsung-galaxy-a52015-sm-a500f-t3360802 .
I have tried other TWRP and Cynogen Recovery which is still the same. This one from the link which at least let me boot into normal.
The only method for me to boot into normal is to flash to the stock firmware via odin which then I need to reroot, reinstall twrp and try to figure out is there any other method with.
Restoring backup are not working as well for twrp which still boot back to the recovery. Some flash files, which event better ( this refer to the deodex http://forum.xda-developers.com/sam...nt/deodex-deodexed-samsung-galaxy-a5-t3232134 ) which stuck in that samsung loding screen while booting.
Any help would be thankful
Jacker31 said:
Hi guys, I faced some trouble while installing xposed with my galaxy A500F.
Here are the problem, my phone keep on boot into recovery (twrp) when i flashed any zip files except the root file recommended by this thread. http://forum.xda-developers.com/samsung-a-series/development/recovery-samsung-galaxy-a52015-sm-a500f-t3360802 .
I have tried other TWRP and Cynogen Recovery which is still the same. This one from the link which at least let me boot into normal.
The only method for me to boot into normal is to flash to the stock firmware via odin which then I need to reroot, reinstall twrp and try to figure out is there any other method with.
Restoring backup are not working as well for twrp which still boot back to the recovery. Some flash files, which event better ( this refer to the deodex http://forum.xda-developers.com/sam...nt/deodex-deodexed-samsung-galaxy-a5-t3232134 ) which stuck in that samsung loding screen while booting.
Any help would be thankful
Click to expand...
Click to collapse
Hello:
- First, TWRP to use and it is the only one that does not give me trouble installing ROMs Marshmallow (as Resurrection Remix, AICP or CM13) is the v3.0.0.1 of mygalaxya (download here). Steps for install: here
- Second, if you are in ROM Stock 5.0.2 and just want TWRP to install Xposed, I recommend using the v2.8.7 (here) does not give problems at all, although no use to install ROMs Marshmallow.
- Third, it is not necessary deodex the ROM to install Xposed, since there is a modified version of Xposed that works perfectly both as Deodex and Odex ROMs, you can download it from here.
If after using TWRP 3.0.0.1 (or higher) and enters Recovery restart always, I recommend the v2.8.7 flash on it for a normal boot.
I hope the information is usefull. :good:

TWRP/CWM Method of SuperSU caused boot hang on custom rom

Hi guys, I was able to root my G900V, unlock the boot loader into Developer mode, re-write the recovery with TWRP and install AICP custom rom. It was working great, I put Titanium Backup on my phone and it warned of an old version of SU. It recommended I upgrade SuperSU, so I installed the SuperSU app. When it came up of course it detected the same thing (old version of su) and recommended update. I have never used the TWRP/CWM method so again I tried Normal mode. It asked for access and I granted it, spent some time acting like something was happening then failed. I rebooted the phone and tried again -- same thing still failed.
Since I had TWRP installed, I thought I'd give the alternative flash a try. When I chose it, it booted into recovery and flashed a zip file. When it rebooted, it tried to bring up the OS and it hangs at the AICP logo. I can still get into recovery but the OS won't fire up. I'm not sure where to go from here, I think I can start over with ODIN but I'd rather know how to repair this situation (if it's possible) since I started to get the phone set up...
EDIT: By the way, the rom was the AICP Nightly from 12/30 and TWRP of 3.0.2-2.
Solved
I downloaded chainfire's latest SuperSU zip file: https://plus.google.com/+Chainfire/posts/WrCvex7KAZR and flashed it in TWRP. Got me rollin' again.

Phone going into recovery after trying to update the rom?

So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?
beybus said:
So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?
Click to expand...
Click to collapse
Download latest Miui version ,Magisk and lazyflasher-no-verity-opt-encrypt
Wipe cache/Art
Install the rom using TWRP
Install magisk
Install lazy flasher
Reboot.
Every thing you need can be found in this link i have already downloaded it and put all the things in one folder.
https://1drv.ms/u/s!AuqQvn5aQs0xg_IU3fLQqFxu9pp-dg?e=JaoDdC

Unable to root MIUI 10.2.4.0

Hey,
I flashed twrp and then flashed Magisk and SuperSu in MIUI 10.2.4.0, 10.2.5.0 and 11.0.7.0... After flashing and rebooting my phone was not rooted, I tried many versions of Magisk and many times. But didn't work, anyone have any working files?? And does custom rom/kenrel helps rooting the device.
Thank you..
you need to patch the boot img. you can find patched boot img for older roms like that
nvm i had 2 tabs looked the same

Help

Hi
I need some help
I was stock yesterday
Folowed the guide on firts post and managed to OEM unlock, activate developer, debuging on etc,flash vbmeta, then flashed lineage recovery, then i could not istall rom for lack know how, then i flashed twrp over lineage recovery.
Downloaded latest lineage and gapps from provided links.
managed to install both no problem, i boot to lineage and do inicial setup etc.
The problem is when i restart the tablet or turn it of, it wipes everything and im back to the initial setup.
Can someone give me some insight on whats happening?
i dont want root so i passed the magisk steps.
EDIT-
Managed to install with lineage recovery and everyything is fine now
May close this thread
Thanks in advanced.

Categories

Resources