Related
So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Easier thing to do is flash boot.img from the factory image to boot_a and boot_b if you are having issues.
This problem occurs when you flash TWRP if you have root installed. To avoid, remove root before installing TWRP.
Oh, I should mention to get into bootloader from TWRP, simply use the adb command "adb reboot bootloader". Should work, worked for me.
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Nitemare3219 said:
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Click to expand...
Click to collapse
Until it gets a little more stable on the Pixel, this is probably a good idea.
Good idea. But I M sometimes flashing when I am at or on the way to work.
Flash junkie needs his daily dosis
mikaole said:
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Click to expand...
Click to collapse
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
I have this issue and flashing supersu didn't fix my problem. Will go to factory image flashing.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
Thanks! This worked for me.
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
cognitivedissonance said:
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
Click to expand...
Click to collapse
This is a Pixel XL forum.
Homeboy76 said:
This is a Pixel XL forum.
Click to expand...
Click to collapse
Aren't the two systems (Pixel OG and Pixel 2) extremely similar? If they're not, then my advice should be ignored for anyone using the Pixel OG.
Hey all, I've spent my entire night trying to get root on my new OnePlus 5 so that I can transfer all of my data from my Nexus 6p over through TitaniumBackup, but for some reason I am having weird issues.
I've followed Funk Wizard's guide on unlocking the bootloader and getting a custom recovery to root, but that's when weird things began to happen. I flawlessly was able to get TWRP running the first time through since it was similar setup to how I got everything working on my Nexus 6p. Once I tried booting back into the ROM though after flashing Magisk, the boot failed and rebooted back into recovery. This kept happening no matter what I tried to do. TWRP also was failing to flash the full Oxygen OS zips as well. I tried flashing stock recovery over TWRP to see if that would let me flash the zip, but then it stuck me back in TWRP afterwards despite overwriting it. I updated the TWRP to the "last latest build" which allowed me to flash the zip and boot back into my ROM successfully. However, then I tried going back into the recovery, it defaulted to the stock one again rather than the TWRP I had before. I reflashed TWRP but it keeps getting the stock OnePlus 5 recovery consistently. I am unsure of what to do. :\ I have to switch back to my old battery-failing phone for the time being. I'm not sure what I'm doing wrong.
Drivers work; manually forced the ADB driver for fastboot. Device just OTA'd to 4.5.3 a few moments ago; I am still getting the same issue. I also tried the latest TWRP but it still achieved no results whatsoever. All of my flashing is done through fastboot.
Hi I red your problem tho I am new here I successfuly rooted my OnePlus 5.
I think that the problem is either not using proper rooting zip's or bad drivers so I will tell you how I rooted mine.
I reccomend using this tool so you will be sure 100% that you have the ADB, Fastboot and necessary Drivers.
https://forum.xda-developers.com/showthread.php?t=2588979
Those are the files that I used(The Magisk zip file and the recovery):
https://mega.nz/#!AA8FGLZR!63Q4HGrAoIlNlwR_NVj8Rbq4RKoPKaEnHLtHuEW3o94
I do not remember from where I downloaded them, neither I can find them from my messy history cuz I searched a lot for them around the internet, so I upload them for you!
Magisk link:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
So basically I went to my phone's settings unlocked Developer options by spamming the build number so I can get there and enable OEM unlocking and USB debugging. After that I rebooted my phone into fastboot mode like I just normally turned it off and hold the power button and VOL+ key. after that I connected my OnePlus to the PC using the DASH cable. You should download beforehand the TRWP and latest Magisk.zip so you can root it using Magisk I have not tried using SuperSU. So you basucally flash the TWRP using the "fastboot flash recovery twrp-3.1.1-0-oneplus5.img" command in my case and you transfer the Magisk Manager and zip file on the phone later so you can root. Then you just flash Magisk's latest zip file or use mine. I do not remember if I manually installed the Magisk Manager APK file tho I have it downloaded on my PC gonna zip them real quick with the recovery and uploade them.
So I tried updating to Oxygen is 5.0 ran into an install issue, stuck in boot loop. Lucky I had done a Nandroid back up and restore everything. The other night I decided to update to 5.1.1 thinking why not get Android 8.1.0 on my AWESOME phone. Downloaded update, placed in internal storage, booted into TWRP to do a Nandroid back up (due to issues with past update). Back up failed needed to clean drive. So I decided, phone works in Android 7.1.1, why can't what's not broken. Rebooted phone and somehow the update activated. I freaked since last time it failed and not stuck in a loop. This time update was successful but still got stuck in a boot loop. I plugged my phone to my computer and noticed all my files were gone on their install storage, no files / foldersI recognized (e.g. DCIM, DATA, DOWNLOAD, etc). Emailed One Plus and chatted with them. TWRP was gone and was back on stock recovery. Since all was lost I was asked to "Erase All". I did, rebooted and I'm now on 8.1.1 but all my stuff was lost. So I've done since searching and found FlashFire do to a Nandroid backup but need root. So my question is...
Can I re-root my phone without using TWRP but stock recovery and use FlashFire for my back ups? I am not going to flash custom ROM but if I need to flash something, wouldn't stock ROM flash anything on my phone (Magisk)?
If so, can anyone provide me with assistance on re-rooting my phone without TWRP.
Thank you
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Hi
To root your OnePlus 5, you must to follow carefuly the steps below and take your time.
1 - Make a full backup of your data
2 - Unlock the bootloader (Note that'll erase your phone)
3 - Install another recovery : TWRP. This one : https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download
4 - Flash the full rom Oxygen OS 5.1.1 : http://otafsg.h2os.com/patch/amazon...23_OTA_034_all_1804201219_3824995916a49ee.zip
5 - Install magisk : https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
6 - Clear cache / Dalvik
7 - You're all done, reboot the phone
8 - Once your phone has booted up, install magisk manager : https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
Check this tread, that'll help you as well : https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
vanzant83 said:
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Click to expand...
Click to collapse
Hello, thanks for the info and yes, I did try flashing Magisk with stock recovery, while waiting for a reply and can confirm installation failed. So if I reflash TWRP, flashing Magisk using TWRP will work. Therefore, do you have instructions (step-by-step) on how to install TWRP. I have downloaded the latest TWRP image from their website (twrp-3.1.1-1 cheeseburger) onto my desktop. Bootloader is already unlocked as I was previously rooted under Android 7.1.
Thank you.
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
vanzant83 said:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
Click to expand...
Click to collapse
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
jmoricone said:
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
Click to expand...
Click to collapse
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Try this link, get the ZIP file from the version you want: https://github.com/topjohnwu/Magisk/releases/
In case you need, this the official section: https://forum.xda-developers.com/apps/magisk
vanzant83 said:
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Click to expand...
Click to collapse
Hey there, sorry for the late response..but thank you for the assist..phone is rerooted..all is good..thanks again
Its a shame.
7 years unlocking bootloaders, installing CWM or TWRP or Philz recovery, flashing rom after rom, not even one device bricked, and today, i messed up, i hope its not bad.
So the short version of what i did is that i flashed twrp.img trough and older version of twrp and now it wont boot into twrp, it says that it failed to verify the recovery image or something like that, and my laptop wont recognize the cellphone, the cellphone boots into the latest Havoc rom but without Gapps and without root because i did not install it beforehand, when in bootloader mode it just says that it could not recognize the device.
The long version is that i had Resurrection Remix, obviously an unlock bootloader, magisk etc... everything was fine until today that i tried to install Havoc, the installation went well but i found out that ambient display was not working, someone told me that the previous version of Havoc did not had that problem so i tried to flash it but it bootlooped for like 1hr, so i read that the version of TWRP provided by the OP was the way to get it to work, i downloaded the .img file and flashed it trough TWRP and tried to install Havoc again but i was stuck in a bootloop, so i flashed the latest Havoc build so i could download the latest version of twrp, i did not flash Gapps or Magisk because i was going to re flash the rom and then flash Gapps and magisk, so i downloaded TWRP and flashed trough TWRP and thats when the sh$& hit the fan, now it wont boot into TRWP and my laptop wont recognize the device, neither on android nor in bootloader mode.
So, thank you guys in advance for your help, tomorrow im going to try on a computer at my work and see if its my computer and if not, well, ill have to se what you geniuses come up with. thank you so much again.
Info:
Rom build number: opm6.171017.030.h1 or 20180811 android 8.1.0
TWRP: i started with 3.2.2-0 then i downgraded to 3.2.1-0 and the one that messed up everything was 3.2.3-0
By the way, I have a full twrp backup of when my phone was stock, (but no way to use it) T_T