Related
hello guys
i have i9505 here when it boots it shows in top left corner this massage in red and yello and it just stuck at that massage with galaxy s4 logo
(red) boot screen kernel is not seandroid enforcing
(yello ) set warranty bit kernel
TBH with you guys i Don't know what happened with this phone beside someone tried to flash it with a rom and it went wrong
and what do you think about this thread http://forum.xda-developers.com/showthread.php?t=2594483 did anyone try it and what happened to phone ??
how do i know phone region ?? CSC_config_LSB
a friend of me said i need Z3x samsung tool box to fix it is that a box or a program that i can download ??
I'm sorry to bother you
That method should work
Edit: and no you don't need any toolbox
thank you another question how do i know My Phone CSC or region or any firmware will be ok ??
I honestly don't know, for my model I just download the firmware for it and flash it but it may be different for the i9505.. I would think you download the firmware for your country/carrier if available from sammobile.com and flash it through Odin.. There may be a guide for this try searching the forums
on which model you tried this ?? and how did it go , did work ??
I didn't have the same problem but I know this solution works, it fixes many problems.. I have M919 USA model
ok i will try it nothing to lose and About Z3x do you really think I don't need it , because my friend said its only solution for this problem !
Yeah I'm pretty sure you don't, as long as it turns on you shouldn't need it for the most part
i tried that on 1st attempt it failed however in 2nd attempt odin doesn't detect phone ??
i did try it 3 times i only got a firmware upgrade enncoutered an issue please select recovery mode in kies and try again !! AND kies is not connecting the Phone.
Uninstall kies, reboot and try again
did that nothing changed
Try changing usb ports and try every last available port, if that doesn't work try reinstalling drivers
did it all and nothing changed
will downgrading help ??
farooq88 said:
will downgrading help ??
Click to expand...
Click to collapse
Nope.. Can you try a different computer?
Edit: what version of Odin are you using? Try a different version, or newest if you don't already have it
It's just a normal message when you use a custom kernel. A custom kernel is always included in a custom rom. So nothing to worry about.
You can do 2 things:
1. Flash a custom recovery (if you don't already have on), flash the custom rom you want.
2. Flash one of the latest stock roms. The rom from the thread you posted is outdated and can't be flashed to your phone if you have the latest bootloader.
They are right, I actually thought about suggesting that but for some reason I thought you didn't have custom recovery, if you do you can just flash a ROM without having to worry about connecting to Odin
sorry for late respond i will try to flash recovery and see if i can boot to into it
i bought note 3 from one stranger and i forget to check the sticker on the back of the battery ( it was removed) , as explained by he " He used the mobile regularly but after rooting he got the signal problem and is not solved by flashing back the stock 4.4.2, " the mobile is working greatly for normal uses like video gaming etc ,i decide to use custom rom so i flashed the recovery but it failed on odin, after that i restarted the phone but it says "firmware upgrade encountered an issue . please select recovery mode in kies and try again " . i downloaded the uk frimware and try to flash but it fails in the half , after lot of research i got to know that there are two type of Note 3 , one normal one and one the demo unit , now am worried is my Note 3 is demo unit ?? as the sticker is pulled off .. in odin mode it shows the prodect name as SM-N9005, am the Firmware installing Failed i dont know why , so am thinking is DEMO UNIT so the flashing failed .
Please help me my mobile stuck on the odin mode ..
Is there any way to know what exactly my mobile is ?? it is demo or normal ???
and if it is demo please tell me how to make it run so that i can use it as tablet ...
NOTE: he said that he was using the phone as normal , but the sticker is pulled off so am worried ...
what i have tried..
1) Flashed the latest KK through the Odin and it failed .
2) Flashed the Recovery through Odin again it failed .
3) Tried to flash kernel again it failed .
thanks in advance ... am ready to donate if any one in the huge community help me ..
SORRY FOR BAD ENGLISH ...
lovegurulavdev said:
i bought note 3 from one stranger and i forget to check the sticker on the back of the battery ( it was removed) , as explained by he " He used the mobile regularly but after rooting he got the signal problem and is not solved by flashing back the stock 4.4.2, " the mobile is working greatly for normal uses like video gaming etc ,i decide to use custom rom so i flashed the recovery but it failed on odin, after that i restarted the phone but it says "firmware upgrade encountered an issue . please select recovery mode in kies and try again " . i downloaded the uk frimware and try to flash but it fails in the half , after lot of research i got to know that there are two type of Note 3 , one normal one and one the demo unit , now am worried is my Note 3 is demo unit ?? as the sticker is pulled off .. in odin mode it shows the prodect name as SM-N9005, am the Firmware installing Failed i dont know why , so am thinking is DEMO UNIT so the flashing failed .
Please help me my mobile stuck on the odin mode ..
Is there any way to know what exactly my mobile is ?? it is demo or normal ???
and if it is demo please tell me how to make it run so that i can use it as tablet ...
NOTE: he said that he was using the phone as normal , but the sticker is pulled off so am worried ...
thanks in advance ... am ready to donate if any one in the huge community help me ..
SORRY FOR BAD ENGLISH ...
Click to expand...
Click to collapse
Download any latest firmware from sammobile and flash it in odin
Edit: as im reading your post again the owner said no signal/no network? so it can be a demo unit as demo unit dont have the radio for gsm
meawww said:
Download any latest firmware from sammobile and flash it in odin
Click to expand...
Click to collapse
i downloaded and while flashing it gives error .. Failed .. i tried flashing recovery again it failed ..
lovegurulavdev said:
i downloaded and while flashing it gives error .. Failed .. i tried flashing recovery again it failed ..
Click to expand...
Click to collapse
Here might help you http://forum.xda-developers.com/showthread.php?t=2548761
meawww said:
Here might help you http://forum.xda-developers.com/showthread.php?t=2548761
Click to expand...
Click to collapse
thanks will try that ,
but how to make sure the note 3 i have is demo unit ?? is there any way ??? in Odin mode THe Product Name is SM-N9005.
lovegurulavdev said:
thanks will try that ,
but how to make sure the note 3 i have is demo unit ?? is there any way ??? in Odin mode THe Product Name is SM-N9005.
Click to expand...
Click to collapse
Mostly by checking the imei
meawww said:
Mostly by checking the imei
Click to expand...
Click to collapse
The Sticker is pulled off .. and Mobile soft brick .. so there is no any other way ???
lovegurulavdev said:
The Sticker is pulled off .. and Mobile soft brick .. so there is no any other way ???
Click to expand...
Click to collapse
I guess not but its kinda weird really the stickers were off and no signal network so im thinkin its a demo unit,On the link i have posted you can give it a shot if you able to boot the unit u can check it better.
Try to flash the files on that post first and check
meawww said:
I guess not but its kinda weird really the stickers were off and no signal network so im thinkin its a demo unit,On the link i have posted you can give it a shot if you able to boot the unit u can check it better.
Try to flash the files on that post first and check
Click to expand...
Click to collapse
Ok Downloading ... and will tell you the result ..
Update:
I tried the demo unit firmware (given link) but the result was same .. it failed the same way.. i tried flashing boot-loader only from that file and its seem my mobile have newer bootloader than that provided in the unit demo firmware.. Trying from last 2 days but no success .. Hope you will find any other way ..
Update 2:
Now i able to flash the Philz Recovery though it says nand write failed but it was flashed and i wipe everything and tried the cm11 nightly but it gives boot loop.. i tried the fix but same .. i dont know what is going on . i can't flash anything through the odin all firmware fails .. recovery fails., kernel fails and the single pit also fails.. by saying nand write fail .. i think the emmc is set to read only but don't know how to remount it to RW .. hope you understand what i mean.
Please can anyone help? "Kernel is not seandroid enforcing" N910C Apologies in advanc
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
You could have flashed a Stock ROM first / fresh and then try out other ROMSs.
Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
yeah , a stock rom would really help.. (try flashing cf-auto root if you only wanna root it)
Captain Droid said:
You could have flashed a Stock ROM first / fresh and then try out other ROMSs.
Click to expand...
Click to collapse
Yes, possibly...
However, what I did was try to back up the supplied ROM first.
So that I would be less likely to bugger it up
I'm not sure that it has the OEM ROM tbh.
ArmanFGT said:
yeah , a stock rom would really help.. (try flashing cf-auto root if you only wanna root it)
Click to expand...
Click to collapse
Hi,
I don't think I can flash anything at the moment ?
All I'm getting is "Kernel is not seandroid enforcing" in a loop.
Not sure where or how to start
V+ & home & power does go to Team Win Recovery Project v2.8.7.0
Can I do anything useful from there ?
TIA...
well, by flashing i meant downloading a frimware from sammobile or... and using odin to install the stock rom , dont let that "kernel not seandroid enforcing" get on you nerve that one doesnt really matter , only way to solve your prob is to install a stock frimware...
about the slow download speed try searching the latest frimware name on google and a direct link from another download site might probably come up...
ArmanFGT said:
only way to solve your prob is to install a stock frimware....
Click to expand...
Click to collapse
I don't have a stock firmware, I'm not even sure what the correct firmware is.
I'm in exactly the situation I was trying to avoid....
I have tried to install a firmware from TWRP but it failed.
I'm not sure where to start or what I can do with the phone as it is...
Buggereditup said:
I don't have a stock firmware, I'm not even sure what the correct firmware is.
I'm in exactly the situation I was trying to avoid....
I have tried to install a firmware from TWRP but it failed.
I'm not sure where to start or what I can do with the phone as it is...
Click to expand...
Click to collapse
of course it would fail . which country do you live in?
try using this :
http://www.sammobile.com/firmwares/database/SM-N910C/
PDA Name is your Correct frimware Name...
ArmanFGT said:
of course it would fail . which country do you live in?
try using this :
http://www.sammobile.com/firmwares/database/SM-N910C/
PDA Name is your Correct frimware Name...
Click to expand...
Click to collapse
Hi,
I'm in the UK, though it did say Poland in the settings (can't access them now) it also mentioned the united arab emirates ?
I don't think I can find the PDA if the phone won't boot ?
Buggereditup said:
Hi,
I'm in the UK, though it did say Poland in the settings (can't access them now) it also mentioned the united arab emirates ?
I don't think I can find the PDA if the phone won't boot ?
Click to expand...
Click to collapse
i bought the phone when i was in india and i flashed the ROM which was released in some other country. Now im in saudi. Its working for me perfectly.
I guess the only solution for your problem is to download a stock version and flash using Odin. Then you can start trying other ROMs and so.
It will work 100% for sure.
Thanks.
Captain Droid said:
I guess the only solution for your problem is to download a stock version and flash using Odin. Then you can start trying other ROMs and so.
It will work 100% for sure.
Click to expand...
Click to collapse
I'm trying - but as I was trying to back up the ROM is came with and failed I don't have a back up.
I'm looking at some ROMs but I don't know which one would be stock or correct for this phone.
How do I tell ?
TIA
Hi,
I could really do with being pointed in the right direction.
I am trying to get a working ROM onto a N910C - nothing I've tried so far is even close to working.
The N910C has WKRP installed now, which I am not familiar with, having only used CWM before.
Will this work ? http://www.ibtimes.co.uk/samsung-releases-android-5-1-1-ota-update-galaxy-note-4-sm-n910c-1517429
Can I install from TWRP ?
How do I tell if a ROM is compatible ?
Is there any way of telling if on of these might be work ? http://www.sammobile.com/firmwares/database/SM-N910C/
Still very stuck
TIA...
Buggereditup said:
Hi,
I could really do with being pointed in the right direction.
I am trying to get a working ROM onto a N910C - nothing I've tried so far is even close to working.
The N910C has WKRP installed now, which I am not familiar with, having only used CWM before.
Will this work ? http://www.ibtimes.co.uk/samsung-releases-android-5-1-1-ota-update-galaxy-note-4-sm-n910c-1517429
Can I install from TWRP ?
How do I tell if a ROM is compatible ?
Is there any way of telling if on of these might be work ? http://www.sammobile.com/firmwares/database/SM-N910C/
Still very stuck
TIA...
Click to expand...
Click to collapse
Download this. This is the latest Lollipop ROM for SM-N910C. Download and flash this using Odin.
Vol down + Home Button + Power Button, Then connect the phone to the Pc and flash with odin.
If its confusing for you then READ THIS tutorial. Read completely and follow the instructions . . . this will work because i used the same method.
Captain Droid said:
Download this. This is the latest Lollipop ROM for SM-N910C. Download and flash this using Odin.
Vol down + Home Button + Power Button, Then connect the phone to the Pc and flash with odin.
If its confusing for you then READ THIS tutorial. Read completely and follow the instructions . . . this will work because i used the same method.
Click to expand...
Click to collapse
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?
Buggereditup said:
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?
Click to expand...
Click to collapse
i am not sure why the boot loop, you sure you followed the right steps while flashing using ODIN ?
and the link you have mentioned , its for Note 3 right ??
Buggereditup said:
Hi,
Thanks that's what I've been trying to do, downloaded 3 ROMs before you suggested that one. Finally worked out that unzipping them in windows was causing errors (reason unknown) switched to a different zip program and the ROMs are ok now. Still wouldn't install in Odin, switched to a different PC - same problem - bought a new quality USB lead and I've now installed the ROM suggested by you, I don't know whether the other ROMs would have installed as I didn't try with the new USB cable.
All the operations in Odin carried out successfully, I've now got a slightly different problem - when Odin finished, the phone booted:
"Samsung Galaxy Note 4" "powered by Android" then just SAMSUNG logo in the middle of the screen with some music - then back to the "Samsung Galaxy Note 4" "powered by Android"
I've had to take the battery out to stop the bootloop - I have looked for answers to this: https://www.androidfilehost.com/?fid=23501681358554645
I'm a bit reluctant to randomly try fixes in case I make it worse ?
If anyone can help me out of the boot loop ?
Click to expand...
Click to collapse
Maybe the version that your phone was running was "coj5" Build of 5.1.1. this is the latest build of 5.1.1 and it basically locks down your phones bootloader you can't flash any old 5.1.1, 5.0.1 or 4.4.4 firmwares just go to http://www.sammobile.com/firmwares/database/SM-N910C/PAK/ and download the top firmware which is coj5. flash it and it might take you out of the bootloop (do a factory reset first) it will lock your bootloader to run only 5.1.1 or newer builds but since you have already tried other roms i think its worth it atleast you will have a working phone. (don't worry about csc being PAK it does not have any additional bloat)
Just in case it's of any help to anyone in the future.....
The unzipping problem was down to unzipping inside windows - as soon as I used winrar, no more corrupt files.
The install from Odin problem was down to a knackered USB cable.
Many thanks to Captain Droid and everyone else.
I got out of the last bootloop by repeatedly wiping the caches, after about 3 wipes it booted and seems to be running ok...
I'm very pleased to have it working again
Is there's a safe/best way to try other ROMs or is it a case of best leave alone ?
Less bloatware would be nice - or is there a way to properly remove some of it ?
I have N910CXXU2COL2_N910COLB2COL1_THL installed atm
What's the best currently available custom ROM for the N910C ?
Do not be afraid to ask dumb questions; they are easier to handle than dumb mistakes
Is there any obvious reason why Rom Manager can't install a custom recovery with this Rom ?
Captain Droid said:
Download this. This is the latest Lollipop ROM for SM-N910C.
Click to expand...
Click to collapse
Hi,
I've installed this and am grateful to have a working ROM. I thought that after installing this, I would be able to install other ROMs ?
I would like to back up EFS and the current install before trying to install another ROM, ROM Manager won't work, so I have tried to back up EFS from Philz Touch Recovery, that hasn't worked either. It couldn't write to SD1 but claimed to have written to the phone, but hadn't.
I've also tried to install Sixperience from Philz, without any success - another bootloop. I eventually managed to reinstall the THL ROM via Odin.
Is it possible to back up EFS from the THL ROM ?
Can I install sixperience from Odin ?
Is sixperience the best ROM to try ?
TIA.....
Buggereditup said:
Hi,
I realise that this is a common problem and that the usual response is "go read"
Here's the short version:
Bought the phone secondhand ROM installed is some varient of 5.1.1 afaik, tried to back up the ROM before trying otrher ROMS, CWM didn't work - read some threads - tried TWRP which seems to be installed, got into a boot loop, read some more threads - tried to install glamour S6 from TWRP, nothing happened now getting "Kernel is not seandroid enforcing"
Absolutely no idea where to start - I've had android phones before and always successfully rooted and installed ROMS before.
If anyone could help I would be very grateful as I don't want to make it even worse.
TIA....
Click to expand...
Click to collapse
Hi
I face the same problem last 2 month ago ,,, & Solution it was very Easy but not seen ,,, ok listen first you should do start with the following steps & your phone will be alive again ^_^ :
1. Download & install Kies ======>> http://www.samsung.com/us/smart-switch/assets/downloads/SmartSwitchPC_setup.exe
2. Choose Recovery Mode in Kies.
3. Follow the steps on Kies & do what he is saying
4. Don't' forget to put your phone in Download Mode.
Fi you need any help Contact me Thx ^_^
.
Hello guys, so yesterday I rooted and installed TWRP on my Galaxy Note 3, but i've got 2 versions of TWRP one was HLTE and one was HA3G, the first time I installed the HA3G, but when I was trying to install the HLTE ( The wrong one for my phone because I don't have LTE) odin froze on some thing, So I was stupid and I shut down my phone while it was updating and now I'm stuck with the " Firmware update encountered an issue. Please select recovery mode in Kies & Try again" But when I try to recover it with kies it says that SM-N900 is not compatible with recovering or something like that. So I'm trying to bring it back with odin. I've downloaded some .tar firmware repair files, but they're not helping. I've tried to flash the stock firmware that i've got from sammobile.com and now I'm trying to flash the TWRP HA3G, maybe it will help me do something but like with the others this stopps at some random point. And whatever i do it doesn't show a proggres bar in odin it is only showing the blue text at ID:COM. Right now I'm in download mode with 'Current binary: Samsung Official" and " Sistem Status: Custom " even tho I didn't manage to succesfully install a custom rom. When I was trying to install a custom rom there was always the error 7 before I bricked my phone with odin . Please help me if you can, I can sharescreen trough skype if this is any helpful.
P.S The recovery on the phone isn't working aswell.
Flash stock rom via Odin.
Nex time post in Q&A .
Sent from my SM-N930F using XDA-Developers mobile app
ParadoniX said:
Hello guys, so yesterday I rooted and installed TWRP on my Galaxy Note 3, but i've got 2 versions of TWRP one was HLTE and one was HA3G, the first time I installed the HA3G, but when I was trying to install the HLTE ( The wrong one for my phone because I don't have LTE) odin froze on some thing, So I was stupid and I shut down my phone while it was updating and now I'm stuck with the " Firmware update encountered an issue. Please select recovery mode in Kies & Try again" But when I try to recover it with kies it says that SM-N900 is not compatible with recovering or something like that. So I'm trying to bring it back with odin. I've downloaded some .tar firmware repair files, but they're not helping. I've tried to flash the stock firmware that i've got from sammobile.com and now I'm trying to flash the TWRP HA3G, maybe it will help me do something but like with the others this stopps at some random point. And whatever i do it doesn't show a proggres bar in odin it is only showing the blue text at ID:COM. Right now I'm in download mode with 'Current binary: Samsung Official" and " Sistem Status: Custom " even tho I didn't manage to succesfully install a custom rom. When I was trying to install a custom rom there was always the error 7 before I bricked my phone with odin . Please help me if you can, I can sharescreen trough skype if this is any helpful.
P.S The recovery on the phone isn't working aswell.
Click to expand...
Click to collapse
Flash md5 file via PDA using md5 in link
Download mode: power home volume down combo
Link:
https://v.gd/5Hxl8b
I'm free to Skype or pm.
Stock firmware can be found on sammobile.com. The download is a bit slow but has always been reliable for me.
audit13 said:
Stock firmware can be found on sammobile.com. The download is a bit slow but has always been reliable for me.
Click to expand...
Click to collapse
hey...refer to my post up there...i provided a mirror...download takes 3mins now for my mirror compared to sammobile, which is 2.5 hs
ParadoniX said:
Hello guys, so yesterday I rooted and installed TWRP on my Galaxy Note 3, but i've got 2 versions of TWRP one was HLTE and one was HA3G, the first time I installed the HA3G, but when I was trying to install the HLTE ( The wrong one for my phone because I don't have LTE) odin froze on some thing, So I was stupid and I shut down my phone while it was updating and now I'm stuck with the " Firmware update encountered an issue. Please select recovery mode in Kies & Try again" But when I try to recover it with kies it says that SM-N900 is not compatible with recovering or something like that. So I'm trying to bring it back with odin. I've downloaded some .tar firmware repair files, but they're not helping. I've tried to flash the stock firmware that i've got from sammobile.com and now I'm trying to flash the TWRP HA3G, maybe it will help me do something but like with the others this stopps at some random point. And whatever i do it doesn't show a proggres bar in odin it is only showing the blue text at ID:COM. Right now I'm in download mode with 'Current binary: Samsung Official" and " Sistem Status: Custom " even tho I didn't manage to succesfully install a custom rom. When I was trying to install a custom rom there was always the error 7 before I bricked my phone with odin . Please help me if you can, I can sharescreen trough skype if this is any helpful.
P.S The recovery on the phone isn't working aswell.
Click to expand...
Click to collapse
You still got the problem?
Sent from my Xiaomi Mi 5 using XDA Labs
Hard bricked note 3 Sm N900
My Niote 3 Isnt booting neither entering downlaod Mode neither recovery
Can you please get me help how to start it again
Sm- N900 India
siddhanthshetty said:
My Niote 3 Isnt booting neither entering downlaod Mode neither recovery
Can you please get me help how to start it again
Sm- N900 India
Click to expand...
Click to collapse
Download mode can save you easily.. So what happens when you boot into it ?
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Download mode can save you easily.. So what happens when you boot into it ?
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Unable to enter that mode only phone is Not showing anything its dead
siddhanthshetty said:
Unable to enter that mode only phone is Not showing anything its dead
Click to expand...
Click to collapse
Charge and try again.. It should work..
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Charge and try again.. It should work..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Charged the battery is charged
but not showing anything on screen even not showing any light and charging symbol
i think its Bricked and has gone into dead mode
and its samsung Sm-N900 any file which can debrick and without a Jig
Not if its dead you cannot flash a dead phone .
Are you sure the battery is charged ??
Logic says step one is a known charged battery .
harish15 said:
Charge and try again.. It should work..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Unable to charge either no Display totally dead
harish15 said:
Charge and try again.. It should work..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
How to charge as no charging symbol when connected
siddhanthshetty said:
How to charge as no charging symbol when connected
Click to expand...
Click to collapse
Take the battery out and use a standalone charger or buy a new battery .
Not working then too
Service centre is what you want .
The phone is Bricked and i guess nedd to know which is the Resistance for the internal circuit
https://photos.google.com/photo/AF1QipN99jy04i1HbDhaluSkg_X9LGUhKjUKyK5vwnus
I solved it
Problem solved. T/C
ParadoniX said:
Problem solved. T/C
Click to expand...
Click to collapse
How
I've tried to install TWRP on this device but it kept on failing and the other versions won't work. So I got clockworkMod instead but it won't let me boot to recovery and it just says, "Recovery booting..." when it first boots and it doesn't go further then the Samsung logo and it just loops forever...:crying::crying::crying: Someone help Idk how to fix this... and I was planning on getting a new ROM on it too. What the most confusing thing is, is that the code name says hltexx and usually the model's code is hlte so maybe it's cuz of that? Or maybe is it the ROM? The ROM I have is called Dokdo project and it's Android 5.1.1 and the ROM's version is 7.3.2. I've been trying to get a new ROM on it cuz the current one kept on rebooting at a random interval by itself after I installed this app (idk what it is...) I can still use it fine but I want to change it...anyone know why I can't boot to recovery? PLZ HELP :crying::crying::crying::crying::crying::crying: I personally like that phone very much and wish to continue using it...
joseph15two said:
I've tried to install TWRP on this device but it kept on failing and the other versions won't work. So I got clockworkMod instead but it won't let me boot to recovery and it just says, "Recovery booting..." when it first boots and it doesn't go further then the Samsung logo and it just loops forever...:crying::crying::crying: Someone help Idk how to fix this... and I was planning on getting a new ROM on it too. What the most confusing thing is, is that the code name says hltexx and usually the model's code is hlte so maybe it's cuz of that? Or maybe is it the ROM? The ROM I have is called Dokdo project and it's Android 5.1.1 and the ROM's version is 7.3.2. I've been trying to get a new ROM on it cuz the current one kept on rebooting at a random interval by itself after I installed this app (idk what it is...) I can still use it fine but I want to change it...anyone know why I can't boot to recovery? PLZ HELP :crying::crying::crying::crying::crying::crying: I personally like that phone very much and wish to continue using it...
Click to expand...
Click to collapse
I'm sorry I'm not exactly an expert...in recovery stuff maybe try the Q&A section for general rather then for a specific phone?
Start by flashing stock rom via Odin .
N9005 TWRP
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
See multiple identical posts.
SEARCH works .