Database Users

Seriously NEED HELP (S4 Bricked) !!!!!!

i have a verizon s4. i tried to install custom rom in it now i am stuck at this screen which says " downloading.." "do not turn off target"
i tried every version of odin and multiple roms to flash but it says " SW RV. CHECK FAIL : FUSED 5 : BINARY 1"
WHAT ???? IS THAT ??

You might probably have flashed the wrong firmware for your device or Downgraded to older version. I am Attaching a link here please go through it carefully and try recovering your phone with care.
http://forum.xda-developers.com/showthread.php?t=2511880
This is for Note 3 but you can follow the same for yours, download the stock and latest available firmware (KITKAT 4.4.2) for your phone and flash via odin.

tune345 said:
i have a verizon s4. i tried to install custom rom in it now i am stuck at this screen which says " downloading.." "do not turn off target"
i tried every version of odin and multiple roms to flash but it says " SW RV. CHECK FAIL : FUSED 5 : BINARY 1"
WHAT ???? IS THAT ??
Click to expand...
Click to collapse
You are at the wrong forum. This is not for the verizon s4. Go there for anwsers.
Probably you just need to reflash stock firmware or something.

Aamirx12 said:
You might probably have flashed the wrong firmware for your device or Downgraded to older version. I am Attaching a link here please go through it carefully and try recovering your phone with care.
http://forum.xda-developers.com/showthread.php?t=2511880
This is for Note 3 but you can follow the same for yours, download the stock and latest available firmware (KITKAT 4.4.2) for your phone and flash via odin.
Click to expand...
Click to collapse
secure check fail sbl1

tune345 said:
secure check fail sbl1
Click to expand...
Click to collapse
what you did this time, please post in detail.
Get your official firmware from http://www.sammobile.com/firmwares/
register there, then download the firmware for your phone( Please check beneath your battery the proper info about your phone and download the same for your phone)

Aamirx12 said:
what you did this time, please post in detail.
Get your official firmware from http://www.sammobile.com/firmwares/
register there, then download the firmware for your phone( Please check beneath your battery the proper info about your phone and download the same for your phone)
Click to expand...
Click to collapse
i am downloading the firmware from sammobile it was showing me 3 hours to download so i download the same file from a different location , that might be a problem i guess.
but i used odin 3.07 and 3.04
it is showing me the same error
i am about to tried the official rom in a few minutes from the sammobile.

flash the appropriate one.. and reply after flashing

ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol

tune345 said:
ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol
Click to expand...
Click to collapse
Which ROM you were using before all this happened

tune345 said:
ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol
Click to expand...
Click to collapse
You should go to the forum for you device. This forum is NOT for you device.
http://forum.xda-developers.com/sitesearch.php?q=SW REV. CHECK FAIL
And because you posted little usefull information in this topic it's hard to help.

Aamirx12 said:
Which ROM you were using before all this happened
Click to expand...
Click to collapse
i was using the stock ROM when i tried to install cyanogen few months back but the processed did not go through successfully so now when i start the phone i get the samsung custom logo.
so i was using that for months now because it did let me go thru normally even though the process of installing cyanogen didn't completed. So i think i messed up some internal files.
but phone was working good and everything until when i wanted to factory reset , it goes into odin mode and then gives me that error no matter
what version or Stock rom i use

Mod Edit
Please post in your variant's forum:
http://forum.xda-developers.com/forumdisplay.php?f=2314
Thread closed
malybru
Forum Moderator

boot screen kernel is not seandroid enforcing

hello guys
i have i9505 here when it boots it shows in top left corner this massage in red and yello and it just stuck at that massage with galaxy s4 logo
(red) boot screen kernel is not seandroid enforcing
(yello ) set warranty bit kernel
TBH with you guys i Don't know what happened with this phone beside someone tried to flash it with a rom and it went wrong
and what do you think about this thread http://forum.xda-developers.com/showthread.php?t=2594483 did anyone try it and what happened to phone ??
how do i know phone region ?? CSC_config_LSB
a friend of me said i need Z3x samsung tool box to fix it is that a box or a program that i can download ??
I'm sorry to bother you

That method should work
Edit: and no you don't need any toolbox

thank you another question how do i know My Phone CSC or region or any firmware will be ok ??

I honestly don't know, for my model I just download the firmware for it and flash it but it may be different for the i9505.. I would think you download the firmware for your country/carrier if available from sammobile.com and flash it through Odin.. There may be a guide for this try searching the forums

on which model you tried this ?? and how did it go , did work ??

I didn't have the same problem but I know this solution works, it fixes many problems.. I have M919 USA model

ok i will try it nothing to lose and About Z3x do you really think I don't need it , because my friend said its only solution for this problem !

Yeah I'm pretty sure you don't, as long as it turns on you shouldn't need it for the most part

i tried that on 1st attempt it failed however in 2nd attempt odin doesn't detect phone ??

i did try it 3 times i only got a firmware upgrade enncoutered an issue please select recovery mode in kies and try again !! AND kies is not connecting the Phone.

Uninstall kies, reboot and try again

did that nothing changed

Try changing usb ports and try every last available port, if that doesn't work try reinstalling drivers

did it all and nothing changed

will downgrading help ??

farooq88 said:
will downgrading help ??
Click to expand...
Click to collapse
Nope.. Can you try a different computer?
Edit: what version of Odin are you using? Try a different version, or newest if you don't already have it

It's just a normal message when you use a custom kernel. A custom kernel is always included in a custom rom. So nothing to worry about.
You can do 2 things:
1. Flash a custom recovery (if you don't already have on), flash the custom rom you want.
2. Flash one of the latest stock roms. The rom from the thread you posted is outdated and can't be flashed to your phone if you have the latest bootloader.

They are right, I actually thought about suggesting that but for some reason I thought you didn't have custom recovery, if you do you can just flash a ROM without having to worry about connecting to Odin

sorry for late respond i will try to flash recovery and see if i can boot to into it

Help please

Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU

go to sammobile.com and search for your model there

kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.

kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?

Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.

details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks

if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped

kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?

........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO

Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app

Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.

galaxy S3 neo went dead after flash

hello all ,
my galaxy S3 neo went completely dead after flash with odin .. I had an issue the phone start freezing at the lock screen , nd take long times to response , I also had camera and sounds doesnt work at all so i decided to flash it , I used an Indian region firmware, the phone flashed all fine , odin shows pass after that screen went black and phone won't turn on at all , tried pluggin in the charger , taking off the battery , hitting the power button many times , none of them worked.
any ideas ?

Does it booting into downloading mode?

sahilkhan9557 said:
Does it booting into downloading mode?
Click to expand...
Click to collapse
it does not no

Try this guide http://forum.xda-developers.com/galaxy-s3-neo/help/how-to-unbrick-t2911301
Good luck!

iods said:
it does not no
Click to expand...
Click to collapse
are you using the correct rom???
coz i have the IMEI problem i have sent it to repair & they flashed it with Indian stock rom so my device was software dead from the last week m trying to get the debrick file. yesterday i got it n able to flash it again using the stock rom. but i am going to again try for flashing it to 4.3.
Try it as i have already shared you the debrick file it will work.
:good:

mukulkas143 said:
are you using the correct rom???
coz i have the IMEI problem i have sent it to repair & they flashed it with Indian stock rom so my device was software dead from the last week m trying to get the debrick file. yesterday i got it n able to flash it again using the stock rom. but i am going to again try for flashing it to 4.3.
Try it as i have already shared you the debrick file it will work.
:good:
Click to expand...
Click to collapse
I got the debrick file , and i tried that method with the SD card and all , and it did not work for me

Where to start ?....soft bricked S4.... unknow delaer/firmware :-[

Hi folks!!!
I know is very annoying this question....
But already look in a lot of forums in XDA, but without luck....
So I first start with my background about restoring and flashing devices.....
MY first flashing device was a Galaxy S1 with Cyanogenmod.
Later a flash 1 Galaxy Young, and after I fixed a different and default random soft bricked Galaxy Young.
My last flashed device was a S5 with LineageOS 3/4 months ago....
Im did so installing CWM when was possible, using Odin , or ADB....from Linux and W$.....
Until I get lost my last phone Galaxy S5...
So I had to buy a 2° hand phone quickly....he was working OK... for a while ....the time has passed and become more and more slowly....so I decided to make a reset factory .......very BAD IDEA... I didn't take build information....just the model...GT-I9500....
The same info appears in the Odin download Mode....
But there is no tag with SN, and IMEI neither on the back... :'-(
So I get stuck in the Download mode ...but there IS NOT TAG about ODIN mode in this screen.....at least if
unplug the battery, and restart the phone holding PWR+HOME+VOL. DOWN .
[ EDIT ]
Trying to flash stock firmware with Kies ( who request a valid SN, what I take from web ) in the next models
GT-I9505
GT-I9500
give me this message ( in spanish =) ) ==> "este modelo no admite la inicializaciòn" , which means " this model cannot be initialized" .
[ end EDIT ]
I also tried smash (softly...covering with a canvas ) the power button...but without luck...
Seems like the phone is factory locked..... what I had read may be by AT&T or Verizon....any way to know which dealer?
Any idea or recomendation where to start ???
Its ( maybe ) JTAG cable the ONLY way/solution to fix this, or even this is NOT a solution...?
I will waiting for your answers....
TIA
PS: sorry if I made some mistakes with the english

Odin doesn't recognize the phone?

Rhoban said:
Odin doesn't recognize the phone?
Click to expand...
Click to collapse
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash..
After tryed to reset factory whithout luck, I tried to flash lineage, without any result.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
I tried to flash this ROMS's , setting the image on AP field from Odin
Verizon
I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5
I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5
From doidview ==> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
an this bootchain and bootloaders setting up on BL tab:
I545_OC1_Stock_Kernel.tar.md5
NB1-Boot.tar.md5
VRALEC.bootchain.tar.md5
From droidviews.com ==>
I545_NC5_Stock_Kernel.tar.md5
I545_NG6_Stock_Kernel.tar.md5
I know all above is a mess , but the list is the most detailed I can :silly:
thanks again!!!!
PS: I want to put the source link where I take the kernel images and ROM's , but because I'm newbie
( --- ALL new users prevented from posting outside links in their messages. ----), I can't

X00D45 said:
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash.
Click to expand...
Click to collapse
Hi, the same download screen before you started flashing? Do you have "no reboot" ticked? (Heimdall user sorry) After pass just restart the phone and wait 10 min or so.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
Click to expand...
Click to collapse
Never read into this, but resources are there( Seen some topic titles), there is hope for Verizon and AT&T users.
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
Click to expand...
Click to collapse
Did you have a backup? Flashing the wrong pit file might hardbrick your phone. I guess the above where blocked bij Odin (Lucky you).
In short:
Connect your phone in download mode> open Odin> click PDA or AP > Select the stock firmware > start.

You mentioned your device being a GT-I9500, but the ROMs you said you have downloaded are for I545 and I337, both of which are Snapdragon models. The GT-I9500 is the Exynos model.
So that may be your problem.

Thanks LexHimself for your advices! I had backed up already the contacts and pics.
and thanks Rhoban ....for you suggest I have to start again from the beggining, looking for the rigth ROM for my device... so thanks for put spot on the processor model !!!!
So I gonna start again, looking for the right ROMS...
I will post as soon has news about flashing Exynos rom´s....
thanks guys!!!

[SOLVED] !!!!
Hello guys!!!!
As Rhoban point me, I have to look for the right recover image ,and ROM for my phone GT-I9500, with Exynos processor, who has code JA3G, so with that code I can address well .
So I download this recovery image "philz_touch_6.12.8-i9500.tar.md5", and after install, I download and install the right LineageOS ROM for my system.....
but this would not have happened, if I would started for look for the processor model as FIRST STEP...
so THANKS SO MUCH RHOBAN, and thanks LexHimself for your advices!!!!
??????
Cheers!!!!