Hey Guys,
I tried updating my tablet from 4.1 to 5.0 and now i am having some issues. I have no keyboard and my fingerprint sensor doesn't work anymore. So i have no way of doing anything. When I try to bring up the keyboard i get the google voice window.Build number shows BTV-W09C128B350. Trying to understand the steps i need to do to get my tablet back and running normally. Do I need to go back to 4.1? Any help would be greatly appreciated.
Thanks
Erik
lamstang94 said:
Hey Guys,
I tried updating my tablet from 4.1 to 5.0 and now i am having some issues. I have no keyboard and my fingerprint sensor doesn't work anymore. So i have no way of doing anything. When I try to bring up the keyboard i get the google voice window.Build number shows BTV-W09C128B350. Trying to understand the steps i need to do to get my tablet back and running normally. Do I need to go back to 4.1? Any help would be greatly appreciated.
Click to expand...
Click to collapse
How did you do the update? Did you use Firmware Finder and it's DNS update or did you use the dload folder method? I used the Firmware Finder method and everything went smoothly even with an unlocked bootloader, You might try to use that method to reinstall Nougat, but you will need a keyboard to change your DNS settings to the one Firmware Finder needs and for that I suggest you try a USB keyboard connected through an OTG cable.
I will say that once you get Nougat working, the 5Ghz radio goes back to not working and the file that needs to be updated to enable it seems to have changed. So far, I can not find the correct file/setting to change to enable it. For me it is more annoying that I can't get it working than necessary because I am getting between 20 and 40 Mbs with the 2.4Ghz radio and that is plenty fast for what I ask this tablet to do.
johje said:
How did you do the update? Did you use Firmware Finder and it's DNS update or did you use the dload folder method? I used the Firmware Finder method and everything went smoothly even with an unlocked bootloader, You might try to use that method to reinstall Nougat, but you will need a keyboard to change your DNS settings to the one Firmware Finder needs and for that I suggest you try a USB keyboard connected through an OTG cable.
I will say that once you get Nougat working, the 5Ghz radio goes back to not working and the file that needs to be updated to enable it seems to have changed. So far, I can not find the correct file/setting to change to enable it. For me it is more annoying that I can't get it working than necessary because I am getting between 20 and 40 Mbs with the 2.4Ghz radio and that is plenty fast for what I ask this tablet to do.
Click to expand...
Click to collapse
i Johje,
I was able to rollback to Android 6.0 and 4.1. Do you have instructions on how you did the Firmware finder update?
Thanks again for your help
Erik
I used Firmware Finder to update to the most recent Full Update for the US version. After Selecting the firmware choose "Get an update through DNS" and follow the instructions. This will install the beta Nougat and restore your recovery partitions even if you have an unlocked bootloader. Once the tablet has Nougat installed, root by installing TWRP to the Recovery2 partition which will replace eRecovery and leave your main recovery in place. Use TWRP to Flash Magisk and PHH Superuser to root the tablet because from my experience SuperSU does not work for Nougat on this table. Once rooted you can enable the 5Ghz radio by finding the "cfg_btv_hisi.ini" file in the "cust_spec\vendor\etc" directory and then just change "band_5g_enable=0" option to "band_5g_enable=1" , after rebooting the 5Ghz wireless will be enabled.
Hope this helps
johje said:
I used Firmware Finder to update to the most recent Full Update for the US version. After Selecting the firmware choose "Get an update through DNS" and follow the instructions. This will install the beta Nougat and restore your recovery partitions even if you have an unlocked bootloader. Once the tablet has Nougat installed, root by installing TWRP to the Recovery2 partition which will replace eRecovery and leave your main recovery in place. Use TWRP to Flash Magisk and PHH Superuser to root the tablet because from my experience SuperSU does not work for Nougat on this table. Once rooted you can enable the 5Ghz radio by finding the "cfg_btv_hisi.ini" file in the "cust_spec\vendor\etc" directory and then just change "band_5g_enable=0" option to "band_5g_enable=1" , after rebooting the 5Ghz wireless will be enabled.
Hope this helps
Click to expand...
Click to collapse
I have also tried to update to 5.0. Everything seemed fine, but there is no keyboard, calc, file manager, etc. The "full..hw.." update seems to go really fast and it says it's done but there is no difference in what is on the tablet. Now I'm stuck at the point where it's A7.0, but I cannot do anything. Try getting google voice type to enter a complex email password
Any help on the second phase of the update is appreciated.
USA
C128
B350
used dload method to load.
nostep said:
I have also tried to update to 5.0. Everything seemed fine, but there is no keyboard, calc, file manager, etc. The "full..hw.." update seems to go really fast and it says it's done but there is no difference in what is on the tablet. Now I'm stuck at the point where it's A7.0, but I cannot do anything. Try getting google voice type to enter a complex email password
Any help on the second phase of the update is appreciated.
USA
C128
B350
used dload method to load.
Click to expand...
Click to collapse
Can you use Firmware Finder in your tablet's current state? If so, try updating using Firmware FInder's DNS method. You will need to be able to update your network DNS settings, though. Have you tried using a corded keyboard connected through an OTG cable or a bluetooth keyboard?
I did not try using the dload method because earlier attempts an updating Marshmallow to a more recent build always failed because of my unlocked bootloader.
johje said:
Can you use Firmware Finder in your tablet's current state? If so, try updating using Firmware FInder's DNS method. You will need to be able to update your network DNS settings, though. Have you tried using a corded keyboard connected through an OTG cable or a bluetooth keyboard?
I did not try using the dload method because earlier attempts an updating Marshmallow to a more recent build always failed because of my unlocked bootloader.
Click to expand...
Click to collapse
Unfortunately I could not fgure out how to do anything with it in that state (no keyboard, no internet, etc.). I tried to find a quality rollback for USA, but was not sure of what was out there that was correct. I ended up installing a EU version so at least it's working again (with old Android). I also realized the next day that my USB cord was bad and that's why I could not ADB or Fastboot anything. I'll try an upgrade again in the near future. Thx.
nostep said:
Unfortunately I could not fgure out how to do anything with it in that state (no keyboard, no internet, etc.). I tried to find a quality rollback for USA, but was not sure of what was out there that was correct. I ended up installing a EU version so at least it's working again (with old Android). I also realized the next day that my USB cord was bad and that's why I could not ADB or Fastboot anything. I'll try an upgrade again in the near future. Thx.
Click to expand...
Click to collapse
How did you install the EU old version? do you have link to the ROM?
Related
Just plugged the Gpad in to charge and this popped up. Hoping it's 5.0.
It's just sitting on 0% for the longest time.
I will update the status when I have something to report.
#fingerscrossed
-----------------------------
Updated on post:
Nothing. False alarm. I don't know how or why my tablet ended up on the update recovery screen because it was already powered on when I plugged it in, but no update.
That mode is only to update via lgflashtools....
My cousin's v410 is dead and I plugged it in to a USB wall charger. Some conductive trash must have been in the plug, I guess, because it rebooted to firmware update mode on me, instantly and from any state. If you see this mode unplug your tablet, hold down power to restart, and try a different cord or blow/clean the trash out of the plug.
Update to Lollipop lg G pad 7.0 lte v410 AT&T if you got a root issue
I had rooted my lg G pad and could not update to lollipop update this is how I got it to work. I removed the SD card and Sim card then I unrooted the tablet and restarted it. I also performed a hard reset from the settings menu. Make sure you unselected the data backup and automatic restore before resetting, now reset tablet. When it restarts just log into the WiFi and nothing else. Now go to settings and go to update center to find the firmware update download it and install it.
jlvvela84 said:
I had rooted my lg G pad and could not update to lollipop update this is how I got it to work. I removed the SD card and Sim card then I unrooted the tablet and restarted it. I also performed a hard reset from the settings menu. Make sure you unselected the data backup and automatic restore before resetting, now reset tablet. When it restarts just log into the WiFi and nothing else. Now go to settings and go to update center to find the firmware update download it and install it.
Click to expand...
Click to collapse
I'm too waiting for the same update, did you get any new link for that, mine is on 4.4.2 v41010d
No the update I got it through the settings menu on the tablet go to about tablet and then to check for updates that's how I got it.
Does anyone have any KDZ files?
I had a corrupted Stock ROM on a G Tab 7 Tablet due to applications that were installed by the previous owner; no matter what I did, Addware apps would always install on there own; I mean, even after restoring factory settings via the settings, or via the hardware combinations keys to reset to factory settings, It would reset the device but it would still install all the annoying apps as if they were Factory installed; weird, I had never seen something like this in any device I've worked on.
Anyways, since Factory Reset wouldn't help I had to Flash the Tablet.
I found the V41007h_0.kdz file which I was able to flash using the the LG Flash tool.
But now there is a a watermark in red "userdebug 4.20.17(42001700)" in the Home Screen.
So I'm hoping at the very least I can find a KDZ file to go back to the firmware version that the Tablet had which was V41010d.
Does anyone have any links to point me in the right direction?
If you can't post it in public, please Private message the links.
Thanks in advance for your help.
RaudelJr said:
Does anyone have any KDZ files?
I had a corrupted Stock ROM on a G Tab 7 Tablet due to applications that were installed by the previous owner; no matter what I did, Addware apps would always install on there own; I mean, even after restoring factory settings via the settings, or via the hardware combinations keys to reset to factory settings, It would reset the device but it would still install all the annoying apps as if they were Factory installed; weird, I had never seen something like this in any device I've worked on.
Anyways, since Factory Reset wouldn't help I had to Flash the Tablet.
I found the V41007h_0.kdz file which I was able to flash using the the LG Flash tool.
But now there is a a watermark in red "userdebug 4.20.17(42001700)" in the Home Screen.
So I'm hoping at the very least I can find a KDZ file to go back to the firmware version that the Tablet had which was V41010d.
Does anyone have any links to point me in the right direction?
If you can't post it in public, please Private message the links.
Thanks in advance for your help.
Click to expand...
Click to collapse
You've flashed a KDZ that contained a test build. If you follow the steps in my thread here http://forum.xda-developers.com/g-pad-10/general/tutorial-lg-gpad-v410-5-1-to-4-4-t3232150 then you can recover the lost space of your internal SD card and run custom ROMs. Unfortunately I don't think there is currently a way to go back to stock 5.0.2 from this point. If there is, it has not been documented in this form (to my knowledge).
Please post in my thread if you need help with that process.
jlvvela84 said:
No the update I got it through the settings menu on the tablet go to about tablet and then to check for updates that's how I got it.
Click to expand...
Click to collapse
I could not get it through SIM card because i don't have an AT&T SIM neither i live in the US nor AT&T has any services nearby, so i definitely need a zip file that might be an OTA or something that can be installed via ADB or system recovery. please share somethings for me.
Update LG Gpad 7.0
talvigi said:
I'm too waiting for the same update, did you get any new link for that, mine is on 4.4.2 v41010d
Click to expand...
Click to collapse
I was trying to update my GPad 7.0 to 5.0.2 or 5.1.0 from 4.4.2 and no OTA updates no matter what I do.
I'm on Android 4.4.2 with software version v41010d. Hardware says LG-V410 in "about tablet" section.
What's the quickest easiest way. I'm concerned that this is an older tablet and isn't updateable or has some update problems so that is the reason for my question. Maybe I'll keep it on 4.4.2 but wanted to run latest Kodi which won't work with anything but 5.0 or greater.
cejack said:
I was trying to update my GPad 7.0 to 5.0.2 or 5.1.0 from 4.4.2 and no OTA updates no matter what I do.
I'm on Android 4.4.2 with software version v41010d. Hardware says LG-V410 in "about tablet" section.
What's the quickest easiest way. I'm concerned that this is an older tablet and isn't updateable or has some update problems so that is the reason for my question. Maybe I'll keep it on 4.4.2 but wanted to run latest Kodi which won't work with anything but 5.0 or greater.
Click to expand...
Click to collapse
I never saw the OTA captured or a 5.X stock rom posted here, sorry. AT&T is notorious for blocking the release of firmware packages for their branded devices, so you won't find a V410 kdz from LG support either. If you can't get the System Update to work from the Settings menu, you might be stuck as far as stock goes. There wasn't much interest in updating stock in the community here because stock 5.0 patched the vulnerability that let us sign our own boot images. That effectively blocked TWRP and custom roms since the bootloader can't be unlocked. You could try the old take your sim out, reboot and check for the update trick. Some people say that doesn't work, and others swear by it.
There are plenty of 5.X and higher custom rom options, if you want to update the system that way. Tesla, Tipsy, and Validus were all 5.1 roms and they're still on androidfilehost.com. LOS and Candy have been updated up to 7.1. I keep Tesla on my V410 and it works great. All the custom roms rely on being on the 4.4 stock bootloader and radios since the kitkat bootloader was the only one vulnerable to the Bump exploit, so you're in a good place to start from.
jason2678 said:
I never saw the OTA captured or a 5.X stock rom posted here, sorry. AT&T is notorious for blocking the release of firmware packages for their branded devices, so you won't find a V410 kdz from LG support either. If you can't get the System Update to work from the Settings menu, you might be stuck as far as stock goes. There wasn't much interest in updating stock in the community here because stock 5.0 patched the vulnerability that let us sign our own boot images. That effectively blocked TWRP and custom roms since the bootloader can't be unlocked. You could try the old take your sim out, reboot and check for the update trick. Some people say that doesn't work, and others swear by it.
There are plenty of 5.X and higher custom rom options, if you want to update the system that way. Tesla, Tipsy, and Validus were all 5.1 roms and they're still on androidfilehost.com. LOS and Candy have been updated up to 7.1. I keep Tesla on my V410 and it works great. All the custom roms rely on being on the 4.4 stock bootloader and radios since the kitkat bootloader was the only one vulnerable to the Bump exploit, so you're in a good place to start from.
Click to expand...
Click to collapse
I find it strange that there isn't a separate device category on XDA for GPad 7.0. I guess there must be a reason - but it's probably too geeked out for a common humanoid like me to understand.
cejack said:
I find it strange that there isn't a separate device category on XDA for GPad 7.0. I guess there must be a reason - but it's probably too geeked out for a common humanoid like me to understand.
Click to expand...
Click to collapse
You aren't the first person to wonder about that. We requested a different forum for the V400/410 early on and it never happened. I don't know why. It does get confusing. You'll find the V400, V410, V480, V700 and probably a few more devices discussed here. A large majority of the development is for the V400/410, though.
Fastboot loop problem. pls help me.
Hi Dear Friends ( sorry my bad eng.)
I will tell you what I do.
1. My Device V410 AT&T version v41010b
2. İ setup my computer lg drivers & lg flash tool & lg one root and V41007h_0.kdz
3. i used one click root and successful.
4. i did my tablet download mode ( volume + and plug usb cable )
5. Start lg flash tool / select v41007h_0.kdz / and click CSE Flash button ( CDMA & DİAG )
6. Start Korean and Engilsh
7. Process pc screen %7 and tablet screen %6. and froze. i go to sleep early morning after 6 hours later. ı look process remain the same.
8. ı closed tablet unplug usb cable.
9. open tablet but only fastboot screen. ı try restart button after fastboot screen / i try restart bootloader select but only black screen.
10. power of and try open only fastboot screen.
what do I have to do now ? Please Help me.
Trane46 said:
Hi Dear Friends ( sorry my bad eng.)
I will tell you what I do.
1. My Device V410 AT&T version v41010b
2. İ setup my computer lg drivers & lg flash tool & lg one root and V41007h_0.kdz
3. i used one click root and successful.
4. i did my tablet download mode ( volume + and plug usb cable )
5. Start lg flash tool / select v41007h_0.kdz / and click CSE Flash button ( CDMA & DİAG )
6. Start Korean and Engilsh
7. Process pc screen %7 and tablet screen %6. and froze. i go to sleep early morning after 6 hours later. ı look process remain the same.
8. ı closed tablet unplug usb cable.
9. open tablet but only fastboot screen. ı try restart button after fastboot screen / i try restart bootloader select but only black screen.
10. power of and try open only fastboot screen.
what do I have to do now ? Please Help me.
Click to expand...
Click to collapse
Download twrp for the V410 to a computer, then connect the tablet to the computer and try using this command with fastboot:
Code:
fastboot boot twrp.img
That should boot you into TWRP without actually flashing it. If it works, from there you should be able to try to wipe and flash some roms. Sorry, but I'm not convinced it will work in the state your tablet is in. If your device is falling back to fastboot, your laf partition is blank or damaged and very possibly some other partitions are missing or damaged too, and that might prevent TWRP or roms from working right.
If that fails, you can use fastboot to restore the laf partition and hope that brings back download mode so you can try the kdz again:
Code:
fastboot flash laf laf.img
I've restored my laf this way; I actually intentionally nuked laf to enable fastboot. I can provide laf.img if you decide to try this.
Is anyone having problems with Bluetooth on their device? Just need to enable it on mine because I used 2FA with my Google account, & have a security token.
Model Number: BTV-W09
Build Number: NRD90M test-keys
EMUI Version: 5.0
Android Version: 7.0
Everything else seems to be working, at least so far. Still only seeing 2.4 GHz frequency with WiFi, but getting 5.0 GHz working is something I can work on later.
My Bluetooth seems to be working fine. I am on EMUI 5 / Android 7.
the second update file likely did not install correctly when attempting the dload method correct? the solution is to install the second update file as a zip from twrp. that fixes the problem, and updates your system version to the correct btv-w09c128b350 (if your using us version) if you don't have the second update file you can download it using firmware finder app, be sure its the full ota version, as the others do not work with this method.
tomchism said:
the second update file likely did not install correctly when attempting the dload method correct? the solution is to install the second update file as a zip from twrp. that fixes the problem, and updates your system version to the correct btv-w09c128b350 (if your using us version) if you don't have the second update file you can download it using firmware finder app, be sure its the full ota version, as the others do not work with this method.
Click to expand...
Click to collapse
I love how people here use abbreviations so frivilously. TWRP?? I googled that and it seems to be a root method. Rooting the tablet isn't a solution to this and we need bluetooth and 5ghz working for US. I had an EU update installed before this, then I hear the US update is out and I hoped it fixed the bluetooth issue. But now I have a USA version with a disabled bluetooth and no 5ghz wifi radio. This tablet is becoming more of a pain than anything....
When it comes to Android, your best solution is not a Google search but a search of the forums here at XDA, TWRP, is a recovery system that can be installed on the device. Once installed it can be used to perform system backups and restores, install firmware install root, wipe a device, do all sorts of nifty things.
To install TWRP you need to unlock your device, the instructions for doing that are in a different forum. Once unlocked you will need to set up adb which instructions can be found in the install TWRP forum, each version of TWRP is device specific, so you have to get the right one. If you really want to dig into figuring out how to do this, you will need to spend several hours reading the forums about this device, or find a friend who knows how to do this that you can trust not to brick your device.
tomchism said:
When it comes to Android, your best solution is not a Google search but a search of the forums here at XDA, TWRP, is a recovery system that can be installed on the device. Once installed it can be used to perform system backups and restores, install firmware install root, wipe a device, do all sorts of nifty things.
To install TWRP you need to unlock your device, the instructions for doing that are in a different forum. Once unlocked you will need to set up adb which instructions can be found in the install TWRP forum, each version of TWRP is device specific, so you have to get the right one. If you really want to dig into figuring out how to do this, you will need to spend several hours reading the forums about this device, or find a friend who knows how to do this that you can trust not to brick your device.
Click to expand...
Click to collapse
does the above mentioned operation void my guarantee for the tablet ?
That's a difficult question to answer. The device comes with two recovery systems built in. There are not many scenarios where you can hard brick the device and are unable to restore it back to factory settings, locked unrooted and like new. Any warranty issue are likely to be hardware not software.
Hmm. I am in the process of using the dc-unlocker client to unlock my bootloader. When the client reads my phone, it shows the build number as NRD90M test-keys, but when I look at device info on the phone, it shows a normal build number. Does anybody know what this means?
First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.
I just got this tablet from Amazon and it came with Android 6.0 and it says there is not an update available. How do I get stock 7.0 on it? I had read reviews that said it was updated which is one of the reasons I bought it.
I never got an OTA for 7 I had to use Firmware Finder in the play store. It found it, downloaded it and installed it.
Sent from my Pixel XL using Tapatalk
Here’s how I upgraded. Reposted from another forum.
The update checker was a non-starter for me until I used it with firmware finder and bypassed having to use a micro+SD card in order to upgrade to EMUI 5. First, I picked the 2.5gb file option within firmware finder which is basically EMUI 5, chose the get an update using dns beta option. Added the dns address that firmware finder provided to my wifi settings by holding down your wifi, choosing modify network, tick advanced options, change settings to static, and then change the dns to the one provided by firmware finder. From there, it downloaded the file, but once finished it passed it on to Huawei's upgrader app and it took over from there. Just remember to remove the dns address from your wifi settings when finished. As I mentioned didn't need to use a SD card and once finished, checked the Huawei updator again and there was another small update available. I thought it was the easiest way to upgrade without having to do too many steps. Once the file was passed on to the Huawei upgrader, it did all the work.
Mediapad M3 Upgrade
Dear friend I have also bought these wonderful tablets these days, I have the same problem, so I installed "firmware finder" app so I can download the new firmware for emui 5.0 btv-w09c100b302, I do not know if the procedure is correct, light forums before upgrade, I would like someone to tell me if I can proceed safely with the upgrade, thank you
I posted how I did it above and it’s correct, and it’s safe. Follow the directions.
okay it's not super clear with Firmware Finder version 6.6 but I finally watched enough videos to figure it out.
Install Firmware Finder
Tap on your model number (should pop up right away at top)
Tap on latest FULL version
Check Firmware access
Tap IN-APP PROXY
Goto wifi settings and press hold your wifi
tap modify
show advanced
PROXY select manual
Proxy hostname: localhost
Proxy port 8080
save or connect
Go to Settings
system update
check for update. It should then show an update. Tap and let it download and install.
Edit: I do not recall having to change the DNS setting. I just checked and mine was still set to DHCP so I am sure I did not change it. Once done with update though do go back and remove the Proxy setting.
ahent said:
I never got an OTA for 7 I had to use Firmware Finder in the play store. It found it, downloaded it and installed it.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I got a BTV-W09C128B005 FW version (USA from Amazon). Updater didn't show any updates. I downloaded a two folder update. I unpacked them (.zip) and put on an SD card under 'dload'. I pressed the vol up/ vol down and power to start the update. It worked and went to BTV-W09C128B350. I then deleted the contents of the 'dload' folder on the SD card, and replaced them with the unpacked USA data upgrade files. The data folder included a lot of app .apks including one called 'bluetooth'. The force update for the 2nd set of files took very little time, and it didn't seem to do anything. It didn't update or install any apps from the data folder, and the vers. stayed at B350. Now bluetooth won't turn on, and the 'update' app is missing from the 'settings' menus. I can't use the other update methods because they use the missing update app.
Huawei cust. support chat assured me that the Android 7 update (OTA) would arrive if I was patient enough. (6 months, yeah right.)
I'm returning this to Amazon to start over. This time I'm going to try other methods that use the updater app, or log into the PC program HiSuite to see if it pushes the update properly.
You chose the complicated way to upgrade. My input ( above ) for how to upgrade is a lot easier and is less riskier as Huawei's upgrade software is involved. Your call, but if you hit a brick wall on other ways to upgrade, consider my suggestion.
Thanks dude (@b4u2), worked like a charm!
hondoslack said:
Thanks dude (@b4u2), worked like a charm!
Click to expand...
Click to collapse
I completely agree with you, it works very well!
Does anyone know what are 500 MB update ?
Are those security / bug fix updates ?
JJ86 said:
I completely agree with you, it works very well!
Does anyone know what are 500 MB update ?
Are those security / bug fix updates ?
Click to expand...
Click to collapse
Looked like security patches and bug fixes to me. They installed after I did the full update. I really like this tablet now that it's on 7.0
b4u2 said:
Looked like security patches and bug fixes to me. They installed after I did the full update. I really like this tablet now that it's on 7.0
Click to expand...
Click to collapse
Did they installed without the app Firmware Finder ?
I like it too with Android 7.0 , despite all the bloatware apps (I'm coming from a Nexus 7).
JJ86 said:
Did they installed without the app Firmware Finder ?
I like it too with Android 7.0 , despite all the bloatware apps (I'm coming from a Nexus 7).
Click to expand...
Click to collapse
For me they installed without firmware finder. Right after first boot, I went to System Settings, and the Update section showed the OTA update. It installed 2. Only thing disappointing is that they haven't released an update to fix KRACK yet.
callanish said:
Here’s how I upgraded. Reposted from another forum.
The update checker was a non-starter for me until I used it with firmware finder and bypassed having to use a micro+SD card in order to upgrade to EMUI 5....
Click to expand...
Click to collapse
I stupidly tried an SD card method first, and ended up with an upgraded tablet with no Bluetooth and keyboard issues. Finally got back to original state and followed @callanish method. Worked beautifully and easily. Anyone else looking to update, I'd suggest this easy method that works. Thanks @callanish! (seriously registered here just to say thanks)
hondoslack said:
For me they installed without firmware finder. Right after first boot, I went to System Settings, and the Update section showed the OTA update. It installed 2. Only thing disappointing is that they haven't released an update to fix KRACK yet.
Click to expand...
Click to collapse
I wasn't so lucky: I had to install it with Firmware Finder (only the one of ~500MB).
Can you please tell me which security patch level do you have ?
I have those of May 2017.
That's what I have, May if 2017. I also used firmware finder and to my knowledge, that's the newest available for this tablet.
Sent from my Pixel XL using Tapatalk
JJ86 said:
I wasn't so lucky: I had to install it with Firmware Finder (only the one of ~500MB).
Can you please tell me which security patch level do you have ?
I have those of May 2017.
Click to expand...
Click to collapse
Mine is also May 2017.
PittTango said:
I stupidly tried an SD card method first, and ended up with an upgraded tablet with no Bluetooth and keyboard issues. Finally got back to original state and followed @callanish method. Worked beautifully and easily. Anyone else looking to update, I'd suggest this easy method that works. Thanks @callanish! (seriously registered here just to say thanks)
Click to expand...
Click to collapse
I did this too, because the instructions in FF app were crap for the other methods. I found the SD card method and ran with it. It didn't put the USA data files on that included the keyboard and bluetooth, and updater app.
I had to return mine to Amazon and try again using the DNS / Updater app method on FF. This time it worked great! This tablet is sooo much better with updated launcher and Android 7.
How on earth did you get it back to original state without sending it back?
---------- Post added at 07:00 PM ---------- Previous post was at 06:53 PM ----------
ahent said:
That's what I have, May if 2017. I also used firmware finder and to my knowledge, that's the newest available for this tablet.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I think there is a security patch level more recent than May '17.
I got my US version with the B005 FW vers. It had a SP level of something like Aug '17 (I don't remember exactly, but it after May of this year.)
It showed no updates in the updater app, but I upgraded it using FF app, and now it says May '17 for the SP level.
I don't think Huawei ever intended US versions to get the Android 7 update because it doesn't comply with current SP levels.
Hi all, I have a question, when I open Firmware Finder I have a list of 4 FullOTA (see attached screenshot), all with the same release date, how can I choose the right one?
@fidrat I worded that poorly. I used the same technique you did, started with a new one.
Hi, UK Honor 7x owner. Had it direct from Honor when it first came out.
I was on BND-L21C432B101 when I first bought it and the only update I could get to update in Huawei firmware finder was the B102 update - I did that update a good while ago and never got any updates via the official update checker and no other update in firmware finder was OK to install via the "check firmware access" .
I have been hitting check for updates many times over the last week but no show. So feeling reckless I set firmware finder to full OTA only and the Oreo update was listed - checked via the "check firmware access" and it said it was OK to install. So set the auto DNS-VPN option and the phone updater picked up the full Oreo OTA (2.47gb BND-L21C432CUST432D2B330 (8.0.0.330)) and it downloaded fine, did a verification OK, then some other check that seem to fail - but I disabled the Firmware Finder VPN and hit to check again and all OK, reboot and it did the update and now on Oreo
Oreo works fine. My impressions (note I use nova launcher prime so my home screen looks and works the same as before).
Pretty underwhelming, 3 advantages. 1) latest security update. 2) face unlock (but it's a bit hit and miss) so finger print unlock is still the way to go. 3) Nav bar hide function - but a bit clunky as it doesn't auto hide. 4) treble support but no really solid ROMs to try yet so a bit niche
And that's about it! So if your stuck without Oreo at the moment then don't get too stressed out unless you absolutely can't survive without the latest security update.
I had heard H7 Oreo was treble compliant - and a checker says it is but not seamless updates (two partition requirement).
Cheers
So does it all work as expected then mate? Just downloaded it via your method, haven't installed yet though.
EDIT: No worries, works like a charm. Thanks man.
npx420 said:
So does it all work as expected then mate? Just downloaded it via your method, haven't installed yet though.
EDIT: No worries, works like a charm. Thanks man.
Click to expand...
Click to collapse
I tried to update for the same but it keeps on saying download failed. What to do now?
arvinsheet said:
I tried to update for the same but it keeps on saying download failed. What to do now?
Click to expand...
Click to collapse
Make sure you are running the VPN in firmware finder, should have no problems then.
npx420 said:
Make sure you are running the VPN in firmware finder, should have no problems then.
Click to expand...
Click to collapse
I tried the auto and manual through DNS and still download failed. I also tried the in-app proxy and still fails to download. But when I press on download from the FF app, it's downloading fine. But I'm not sure how install it that way.
sipart said:
Hi, UK Honor 7x owner. Had it direct from Honor when it first came out.
I was on BND-L21C432B101 when I first bought it and the only update I could get to update in Huawei firmware finder was the B102 update - I did that update a good while ago and never got any updates via the official update checker and no other update in firmware finder was OK to install via the "check firmware access" .
I have been hitting check for updates many times over the last week but no show. So feeling reckless I set firmware finder to full OTA only and the Oreo update was listed - checked via the "check firmware access" and it said it was OK to install. So set the auto DNS-VPN option and the phone updater picked up the full Oreo OTA (2.47gb BND-L21C432CUST432D2B330 (8.0.0.330)) and it downloaded fine, did a verification OK, then some other check that seem to fail - but I disabled the Firmware Finder VPN and hit to check again and all OK, reboot and it did the update and now on Oreo
Oreo works fine. My impressions (note I use nova launcher prime so my home screen looks and works the same as before).
Pretty underwhelming, 3 advantages. 1) latest security update. 2) face unlock (but it's a bit hit and miss) so finger print unlock is still the way to go. 3) Nav bar hide function - but a bit clunky as it doesn't auto hide. 4) treble support but no really solid ROMs to try yet so a bit niche
And that's about it! So if your stuck without Oreo at the moment then don't get too stressed out unless you absolutely can't survive without the latest security update.
I had heard H7 Oreo was treble compliant - and a checker says it is but not seamless updates (two partition requirement).
Cheers
Click to expand...
Click to collapse
Hi, I tried to update through manual and auto DNS but it keeps saying download failed. I tried to download the package directly but I'm not sure how to install it. It shows no option. Do you happen to know how to do it?
arvinsheet said:
Hi, I tried to update through manual and auto DNS but it keeps saying download failed. I tried to download the package directly but I'm not sure how to install it. It shows no option. Do you happen to know how to do it?
Click to expand...
Click to collapse
Suspect you would need to use a custom recovery after the update has been extracted. I can only point you at my original post for doing it the way I did it. Using the auto-dns VPN option worked for me. I assume the firmware finder servers must suffer some overload sometimes perhaps? Perhaps try at a completely different time of day you have tried before? Are you using mobile data or home BroadBand WiFi?
Sent from my BND-L21 using Tapatalk
sipart said:
Suspect you would need to use a custom recovery after the update has been extracted. I can only point you at my original post for doing it the way I did it. Using the auto-dns VPN option worked for me. I assume the firmware finder servers must suffer some overload sometimes perhaps? Perhaps try at a completely different time of day you have tried before? Are you using mobile data or home BroadBand WiFi?
Sent from my BND-L21 using Tapatalk
Click to expand...
Click to collapse
I tried to update via pc using an older version of HiSUITE and Firmware Finder PC and seems to be working that way. Update is still downloading at the moment. Pretty excited here. :laugh::laugh:
arvinsheet said:
I tried to update via pc using an older version of HiSUITE and Firmware Finder PC and seems to be working that way. Update is still downloading at the moment. Pretty excited here. :laugh::laugh:
Click to expand...
Click to collapse
Did it work ?
SquallPT said:
Did it work ?
Click to expand...
Click to collapse
Yes it did. I'm now enjoying my long awaited Oreo update.
arvinsheet said:
Yes it did. I'm now enjoying my long awaited Oreo update.
Click to expand...
Click to collapse
Tried with at least 5 different versions of hisuite, it always says it is up to date. Changed DNS on computer and on hisuite and no luck
SquallPT said:
Tried with at least 5 different versions of hisuite, it always says it is up to date. Changed DNS on computer and on hisuite and no luck
Click to expand...
Click to collapse
Follow the link below.. install the HiSuite version that they used there and all should be working.
https://www.youtube.com/watch?v=8wH0N2brgTA&t=12s
Any of you tried connecting into a VPN whilst tether to this device?
I know Samsung devices won't allow you to when data savings is enabled, but I can't get it to work on this device.
Tempted to unlock the bootloader and put LineageOS but I've read it reduces the battery life significantly
I've found an update to 8.0.0.331, but that is for the L21C10. Not sure what the difference is compared to the L21C432
arvinsheet said:
Follow the link below.. install the HiSuite version that they used there and all should be working.
&t=12s
Click to expand...
Click to collapse
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help
SquallPT said:
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help
Click to expand...
Click to collapse
congratulations! :highfive:
SquallPT said:
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help
Click to expand...
Click to collapse
Hi,
Which version have you downloaded?
I've downloaded BND-L21C432CUSTC432D2B330 - 8.0.0.330 - 133039, but right after reach 99%, pops up a message saying "Download Failed"...
Hi guys, just a quick question. Have H7 dual SIM. BND L21 124. If upgrade to oreo will it keep dual sim?
No joy updating. Downloaded the oreo full OTA but failed at 5%. Tried with 3key combo and *#*#2846597#*#* but no joy...
Don't want to mess with the phone (twrp , root etc) as bricked phone in the past.
Any other options to do the update? The FF says update is approved...
HELP ME PLEASE
My phone was stuck on Honor logo and then loop.
I tried to install update with twrp and I cant do that. (the way that I did before, but seems recovery.img cant loaded this time!)
now my phone has no operating system
it just has eRecovery and TWRP
Hey I'm just struggling a bit in what do d next after check firmwar Access. What do I do after that?