[Guide] Comprehensive Method To Unbrick, Unroot And Lock Your Device - Honor 8 Guides, News, & Discussion

Hi all! After sarchin' on the net (and haven't found anything good), I'll make a guide on How to unroot, unbrick 'n' lock your device.
BEFORE ALL
There is one problem: The rollbacks don't exist for all models, so this guide isn't for everything models. I don't recommend to use it for India, China, Middle East regions' versions.
You can find everything needed for you
HERE for the FRD-L09
HERE for the FRD-L04 (thanks to @matt914)
TESTED DEVICES
FRD-L09 (By me)
FRD-L04 (By @matt914 again)
Code:
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this GUIDE
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WHAT YOU NEED
1. Your device (that guide is only for Honor 8)
2. Your rollback and MM packages WATCH HERE
3. A MicroSD card and its MicroSD/SD or MicroSD/USB reader
4. Your PC (I've tested it with linux, but You can use Windows too).
5. Your USB cable
HOW TO
1. Download the rollback and the MM firmware from hihonor
2. Extract the zip packages, you'll find a dload folder and some pdfs (you can delete these pdfs)
FOR LINUX
3. Before all install the android-tools (google is your friend on that)
4. With THAT you'll be able to extract files from MM UPDATE.APP (thanks to @marco.minetti), you'll find lots of .img files, but we need BOOT.img and RECOVERY.img
5a. reboot your phone to fastboot (Vol-/Power while plug it to your PC)
5b. Open a terminal on the folder where you have the previous 2 files and type:
Code:
sudo fastboot flash boot BOOT.img
sudo fastboot flash recovery RECOVERY.img
sudo fastboot reboot
6a. Your device now is semi-bricked (it can reboot to erecovery and to fastboot but it can't boot)
6b. Shut down your device (long press Power, it will reboot. Press vol+ while asked and boot to erecovery, than shutdown)
7a. Put your rollback's dload folder on the root of the MicroSD (NOT THE INTERNAL MEMORY!)(Use a MicroSD reader)
7b. Insert the MicroSD on your Honor
8. Press Vol+/Vol-/Power and it will start flashing the rollback
9. Your device still in a semi-bricked condition
10. Make passage 7 and 8 again with the MM firmware
11. Now it will boot up without any problem and with MM installed
FOR WINDOWS
3. Before all install the minimal android tool (google is your friend on that)
4. With Huawei Extractor tool, you'll find lots of .img files, but we need BOOT.img and RECOVERY.img (FROM THE MM UPDATE.APP)
5a. reboot your phone to fastboot (Vol-/Power while plug it to your PC)
5b. Open a CMD (with administrator access) on the folder where you have the previous 2 files and type:
Code:
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot reboot
6a. Your device now is semi-bricked (it can reboot to erecovery and to fastboot but it can't boot)
6b. Shut down your device (long press Power, it will reboot. Press vol+ while asked and boot to erecovery, than shutdown)
7a. Put your rollback's dload folder on the root of the MicroSD (NOT THE INTERNAL MEMORY!)(Use a MicroSD reader)
7b. Insert the MicroSD on your Honor
8. Press Vol+/Vol-/Power and it will start flashing the rollback
9. Your device still in a semi-bricked condition
10. Make passage 7 and 8 again with the MM firmware
11. Now it will boot up without any problem and with MM installed
AT THE END
If you have followed the instructions correctly you'll with a device with MM firmware. It will download b380 and than b389 (for the FRD-L09 version).
Flashing the MM package will lock your device (not relock) so you don't need the fastboot oem lock [key]

Great Guide. if you provide direct links for rollback , it would be more easy

venugopalu007 said:
Great Guide. if you provide direct links for rollback , it would be more easy
Click to expand...
Click to collapse
I'm sorry but every device model have their rollback files so it will really long to make

Without p.c just download the both zips and dload one after another.
FRD-LO9 :: http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 (73 MB link)
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101 (1.75GB link )

venugopalu007 said:
Without p.c just download the both zips and dload one after another.
FRD-LO9 :: http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 (73 MB link)
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101 (1.75GB link )
Click to expand...
Click to collapse
That's guide is for unbrick the device

ScardracS said:
That's guide is for unbrick the device
Click to expand...
Click to collapse
But in offical site they said rollback form nougat to mm

venugopalu007 said:
But in offical site they said rollback form nougat to mm
Click to expand...
Click to collapse
And unbrick the device

Rommco05 said:
Hi, good guide. Here is one problem, don't exist rollbacks for all models, I think is only for EU and US. In some situations can rollback US/EU make a problems. I realy don't recommend to use for India, China, Middle East regions. But for EU and US models it is uselful. If u want maybe is good idea update OP
Click to expand...
Click to collapse
Thank man! I've Just edited it but I don't think the rollback package is needed to make the unbrick

ScardracS said:
Thank man! I've Just edited it but I don't think the rollback package is needed to make the unbrick
Click to expand...
Click to collapse
The rollback package definitely doesn't contain a file named BOOT.img. This file is only available in the firmware package.

kayro_ said:
The rollback package definitely doesn't contain a file named BOOT.img. This file is only available in the firmware package.
Click to expand...
Click to collapse
I've corrected the OP

ScardracS said:
I've corrected the OP
Click to expand...
Click to collapse
Within the LINUX guide there is still point 4.:
With THAT you'll be able to extract files from ROLLBACK UPDATE.APP (thanks to @marco.minetti), you'll find lots of .img files, but we need BOOT.img and RECOVERY.img
Click to expand...
Click to collapse

kayro_ said:
Within the LINUX guide there is still point 4.:
Click to expand...
Click to collapse
IMPORTANT: If you can't find the file BOOT.img inside the rollback package -> it's just under a different name called EFI.img.

kayro_ said:
IMPORTANT: If you can't find the file BOOT.img inside the rollback package -> it's just under a different name called EFI.img.
Click to expand...
Click to collapse
No, I've edited the post. You have to use the 2 from mm package

For step 7 in the Windows guide, how exactly are we supposed to put the rollback dload folder onto the SD card when it wont mount the SD card? twrp? or do I have to take out the SD card and use it in a card reader?
edit: Thought I should add that when I go into Windows Device Manager, right click Honor 8, and choose browse files -> ( H: ), it says "Please insert a disc into CD Drive H: "

matt914 said:
For step 7 in the Windows guide, how exactly are we supposed to put the rollback dload folder onto the SD card when it wont mount the SD card? twrp? or do I have to take out the SD card and use it in a card reader?
edit: Thought I should add that when I go into Windows Device Manager, right click Honor 8, and choose browse files -> ( H: ), it says "Please insert a disc into CD Drive H: "
Click to expand...
Click to collapse
You have to use a MicroSD card reader

ScardracS said:
You have to use a MicroSD card reader
Click to expand...
Click to collapse
I had to go through a round-a-bout method with using my old Xperia Z as the SD card reader, but it worked out in the end. Thank you so much! Thanked you in the original post!

matt914 said:
I had to go through a round-a-bout method with using my old Xperia Z as the SD card reader, but it worked out in the end. Thank you so much! Thanked you in the original post!
Click to expand...
Click to collapse
I'm really happy I could try to help you and other guys here

Here are the FRD-L04 files for the unbrick. Firmware on this MM is B122
MEGA link

Thanks for this man. I'll try this out before I sell my Honor 8.
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
matt914 said:
Here are the FRD-L04 files for the unbrick. Firmware on this MM is B122
MEGA link
Click to expand...
Click to collapse
Hey man can you mirror this to Drive?

Oh bro they are from b122. u can extract them if u had b122 update.app

Related

Upgrade to Oreo (8.0.0.360)

My P10 plus is rooted, Normally i can't get system update, so I try to update manually my Android system from nougat (vky-L09c432b150) to Oreo (8.0.0.360) international update, I try it by 2 methods normal update via TWRP and by forcing update by extracting update. App to dload folder on SD card and reboot in erecovery mode to auto start the update process, but unsuccessfully. So guys, what is the good method to execute any new update.?
http://www.stechguide.com/huawei-p10-plus-b360-oreo-firmware-update/
oreo update incomplete
I try to update the system 2 times, 1-from the sdcard 2-i changed to local c:/ in my pc where i put the HOWTA folder
i follow the full steps but when i reach the last one, this phrase "Please wait for upload files and do not press any key." take more than 20 minutes and nothing happend!!
Plez tell me if there any further tricks to do for to succes this process.
Don't need sdcard please copy threes files to HWOTA/Update folder on your PC, type 2
Gamkutopolowk said:
Don't need sdcard please copy threes files to HWOTA/Update folder on your PC, type 2
Click to expand...
Click to collapse
In the guide, Method 2,
3) Now download all three update, data, and public files (make sure you rename the files as mentioned above) and copy them either in the external SDCard inside HWOTA folder or in the PC in the C:\..\HWOTA\update folder.
4) Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.
Click to expand...
Click to collapse
1. if I copy the 3 files in SD Card, do I put it in /SDCard/HWOTA or /SDCard/HWOTA/Update ? Why the folders are different in sdcard or pc?
2. If I have all the files copied in the SD card, do I run the script directly from the SD card? or I have to put it somewhere on the pc and run it as admin?
- 2. I tried running the update.bat from pc and it works.
https://www.youtube.com/watch?v=49AY0MboxuE
Gamkutopolowk said:
Don't need sdcard please copy threes files to HWOTA/Update folder on your PC, type 2
Click to expand...
Click to collapse
Hello,
Please advise hot to update my Huawei P10 Plus VKY-L09CO2B102 to OREO.
Currently Stock Rooted EMUI 5.1 - Android 7.0 - TWRP 3.1.0-0 - root Superuser Koushik.
Did not update since purchase in June 2017. No security updates as well. I deactivated the updater.
Now I would like to update to OREO, update TWRP, and root.
I have TWRP - is it not possible to copy files to SD card and update?
...
https://forum.xda-developers.com/p10-plus/how-to/huawei-p10-plus-debrand-rebrand-update-t3715288

[guide]working downgrade method (emui 8 to emui 5.1) for honor 8 pro

Hi,
So many of us are not happy with the oreo rom of Honor 8 Pro (C675). Those who looking forward to downgrade from Oreo to nougat just follow the steps. (This method is tested and is working. I just finished downgrading and is working perfectly fine. I just want to share this method with you guys. Also this i my first post in the forum. Some steps have been copied from a previous post by xfact)
Things you might need :-
>>A computer
>>At least 8GB memory card.
>>An unlocked bootloader. (you can relock it later)
>>Download the necessary files here :- [The Dload file was previously shared in this forum by xfact, but the link is not working now. Fortunately, I downloaded the file while it was available and I am providing the link to the google drive backup.]
REMOVE THE *** IN BETWEEN THE URL'S
(a) Dload File --- https***://***drive.google.com/open?id=1ZpOoPZ3dEn86lEh0PwlZP0W2LShM-BnT
(b) Recovery File --- https***://***drive.google.com/file/d/1qiP4k5HtJ3VR5l9ac8FnpxrwryIxu-pV/view?usp=sharing
(c) ADB platform tools --- https***://***drive.google.com/open?id=1vu-awRNjH3B9os5MuHGSlu-ca6zNv10V
>>Unzip the above-mentioned Dload file, then go to the folder, then software>dload folder and unzip the 'SDupdate_Package.tar.gz' with 7-Zip. It will extract another archived file called 'SDupdate_Package.tar'. Now unzip that too with 7-Zip and you will get a folder called 'dload' again.
>>Now take an SD card with at least 8 Gb of space, format it to exFAT. Paste the last 'dload' folder and all its contents at the root directory of that SD card. Put it into your phone.
>>To unlock the bootloader, just log into---- https***://***bit.ly/2uEEvdj
This is their chinese website, use translator in chrome to read in english.
Fill up the necessary details and you will get an unlock code for your device.
>>Follow the necessary steps to unlock your bootloader from here :- https***://***bit.ly/2uEM1F8
>>After unlocking the bootloader, your phone will be factory reset. When the phone boots up again, go to settings and enable USB Debugging from devoloper options.
>>Unzip the platform tools zip file and copy the Recovery file into that folder.( you have to unzip the platform tools file while unlocking the bootloader. Just copy the recovery image to that folder)
>>Holding the SHIFT key, right click any empty spaces in the folder and from the menu that appears, select "Open command window here"
>>Connect your handset. Ensure USB debugging prompt appeared as seen in the bootloader unlocking tutorial.
>>In the command window type the following commands :-
1. adb devices
(this is to make sure your device is connected properly)
2.adb reboot bootloader
(to put your device into fastboot mode)
3.fastboot flash recovery_ramdisk DUK-RECOVERY_RAMDISK_NoCheck.img
(to flash the recovery image)
4. fastboot reboot
>>When the device boots up, go to the dialer, type *#*#2846579#*#*
->Click on Software Upgrade -> SDcard upgrade->confirm.
Your phone will recognise the memory card with dload file in it. It will flash the rom. It will get stuck at 99% and shows error. Dont worry, just select reboot system option that appears on the screen.
You will be on the Nougat Rom
To relock the bootloader--
>>Again you have to enable USB debugging from devoloper options>>open command window from the platform tools folder>> execute the commands 1 and 2.
Then type the following command :-
fastboot oem relock *unlock key*
(replace *unlock key* with your unlock key used for bootloader unlock)
YOUR DEVICE WILL BE ON NOUGAT ROM WITH LOCKED BOOTLOADER
As this is my first post, kindly ignore the errors. Sorry if this lengthy post made any confusion. Hope this is helpful to all of you.
akhilbs94 said:
Hi,
So many of us are not happy with the oreo rom of Honor 8 Pro (C675). Those who looking forward to downgrade from Oreo to nougat just follow the steps. (This method is tested and is working. I just finished downgrading and is working perfectly fine. I just want to share this method with you guys. Also this i my first post in the forum. Some steps have been copied from a previous post by xfact)
Things you might need :-
>>A computer
>>At least 8GB memory card.
>>An unlocked bootloader. (you can relock it later)
>>Download the necessary files here :- [The Dload file was previously shared in this forum by xfact, but the link is not working now. Fortunately, I downloaded the file while it was available and I am providing the link to the google drive backup.]
REMOVE THE *** IN BETWEEN THE URL'S
(a) Dload File --- https***://***drive.google.com/open?id=1ZpOoPZ3dEn86lEh0PwlZP0W2LShM-BnT
(b) Recovery File --- https***://***drive.google.com/file/d/1qiP4k5HtJ3VR5l9ac8FnpxrwryIxu-pV/view?usp=sharing
(c) ADB platform tools --- https***://***drive.google.com/open?id=1vu-awRNjH3B9os5MuHGSlu-ca6zNv10V
>>Unzip the above-mentioned Dload file, then go to the folder, then software>dload folder and unzip the 'SDupdate_Package.tar.gz' with 7-Zip. It will extract another archived file called 'SDupdate_Package.tar'. Now unzip that too with 7-Zip and you will get a folder called 'dload' again.
>>Now take an SD card with at least 8 Gb of space, format it to exFAT. Paste the last 'dload' folder and all its contents at the root directory of that SD card. Put it into your phone.
>>To unlock the bootloader, just log into---- https***://***bit.ly/2uEEvdj
This is their chinese website, use translator in chrome to read in english.
Fill up the necessary details and you will get an unlock code for your device.
>>Follow the necessary steps to unlock your bootloader from here :- https***://***bit.ly/2uEM1F8
>>After unlocking the bootloader, your phone will be factory reset. When the phone boots up again, go to settings and enable USB Debugging from devoloper options.
>>Unzip the platform tools zip file and copy the Recovery file into that folder.( you have to unzip the platform tools file while unlocking the bootloader. Just copy the recovery image to that folder)
>>Holding the SHIFT key, right click any empty spaces in the folder and from the menu that appears, select "Open command window here"
>>Connect your handset. Ensure USB debugging prompt appeared as seen in the bootloader unlocking tutorial.
>>In the command window type the following commands :-
1. adb devices
(this is to make sure your device is connected properly)
2.adb reboot bootloader
(to put your device into fastboot mode)
3.fastboot flash recovery_ramdisk DUK-RECOVERY_RAMDISK_NoCheck.img
(to flash the recovery image)
4. fastboot reboot
>>When the device boots up, go to the dialer, type *#*#2846579#*#*
->Click on Software Upgrade -> SDcard upgrade->confirm.
Your phone will recognise the memory card with dload file in it. It will flash the rom. It will get stuck at 99% and shows error. Dont worry, just select reboot system option that appears on the screen.
You will be on the Nougat Rom
To relock the bootloader--
>>Again you have to enable USB debugging from devoloper options>>open command window from the platform tools folder>> execute the commands 1 and 2.
Then type the following command :-
fastboot oem relock *unlock key*
(replace *unlock key* with your unlock key used for bootloader unlock)
YOUR DEVICE WILL BE ON NOUGAT ROM WITH LOCKED BOOTLOADER
As this is my first post, kindly ignore the errors. Sorry if this lengthy post made any confusion. Hope this is helpful to all of you.
Click to expand...
Click to collapse
can I get recovery image file please

[GUIDE] [MAGISK] Root stock Oreo B520 B521 B562

DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521, FRD-L02C432B521, FRD-L04C567B520 or FRD-L09C432B562, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
patched_RAMDISKL04B520.img thanks to @macbuggo for the file
stock_RAMDISKL04B520.img thanks to @macbuggo for the file
patched_RAMDISKL09B562.img thanks to @topscorer for the file
stock_RAMDISKL09B562.img thanks to @topscorer for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02/L04 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKLXXBXXX.img (the exact name depends of the ramdisk you downloaded)
fastboot reboot
Your phone will now reboot
Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it.
You now got root. To unroot, repeat the process with stock ramdisk.
Worked in the first attempt.. Safety net passes..
Sharath007 said:
Worked in the first attempt.. Safety net passes..
Click to expand...
Click to collapse
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?
stephtban said:
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?
Click to expand...
Click to collapse
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot
Sharath007 said:
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot
Click to expand...
Click to collapse
Thanks! I added your ramdisk to OP. Do you still have unpatched version of it for easy unrooting?
delete
PremiumBlaze said:
Can't guys flash Magisk using twrp? It worked for me in android oreo.
Click to expand...
Click to collapse
You can indeed use twrp but as it is not completely functional yet, some people don't use it. Besides, Open Kirin suggest to flash their rom with fastboot so it limits the interest of having twrp.
stephtban said:
DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521 or FRD-L02C432B521, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKL09B521.img OR fastboot flash ramdisk patched_RAMDISKL02B521.img
fastboot reboot
Your phone will now reboot and be rooted
To unroot, repeat the process with stock ramdisk.
Click to expand...
Click to collapse
Thanks! work perfectly
freewind29 said:
Thanks! work perfectly
Click to expand...
Click to collapse
Don't quote entire op please.
Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.
daFlox said:
Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.
Click to expand...
Click to collapse
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.
Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.
macbuggo said:
Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.
Click to expand...
Click to collapse
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.
stephtban said:
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.
Click to expand...
Click to collapse
Ahhh, okay!
Will try it this evening and report tomorrow.
daFlox said:
Will try it this evening and report tomorrow.
Click to expand...
Click to collapse
Works, thanks a lot!! (additional thanks in the original post )
stephtban said:
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.
Click to expand...
Click to collapse
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1
macbuggo said:
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1
Click to expand...
Click to collapse
Thanks. File and credit added to OP. Do you still have stock ramdisk for easy unrooting?
Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5
macbuggo said:
Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5
Click to expand...
Click to collapse
File added. Thx.
Hallo! Is it possible to root my FRD-L09 Honor 8 Oreo this way too? And after then can I flash/install a Stock Version with Emui 5 Android 7 Nougat and then un-root again? I need my device unrooted, because of SkyGo App (Germany) doesnt work with rootet Devices ...
If theres another way to downgrade without these operations, please let me know and maybe show me the steps for that?! Thank you so much!

[GUIDE][UNBRICK] The Huanor GR5X fully unbrick guide

Hi mates, today i come with the unique guide for unbrick our Huanor GR5X phones
THIS GUIDE IS FOR FULLY BRICKED HUAWEI GR5/5X HONOR, ALL MODEL/VARIANT
ATENTION!!!
Files rawprogram0.xml and patch0.xml from my packcage its ONLY for the Huawei GR5 KII-L23 16GB VARIANT!!!
In order to continue with the tutorial, you must create your rawprogram and patch0 xml files
(mini tutorial bellow)
Ready? GO
1) Download my packcage (link MEGA)
2) Install QFIL Software. From my packcage, extract and move the folder 'Firmware' to C:\Program Files\Qualcomm\QPST\bin
3) Download and extract this .IMG files from ANY 5.1 full firmware UPDATE.APP for your model/variant
(Note: for KII-L23 is not necessary GPT.img)
GPT.img
BOOT.img
CUST.img
SYSTEM.img
TZ.img
MODEM.img
Place all img files in C:\Program Files\Qualcomm\QPST\bin\Firmware
4) Install Qualcomm drivers, Connect phone to pc, open Device Manager. If you see under com port Qualcomm USB loader or something along those lines. your good.
5) In QFIL software, if qualcomm driver are found it will say on top of QFIL software Qualcom USB loader 9008 (if say 9006,900E, you must put your phone into EDL mode with EDL Cable or EDL TEST POINT, google it)
6) Once you get the Qualcom USB loader 9008 on QFIL, you can continue
6) Select Build Type: click Flat Build
7) Select Programmer: browse to C:\Program Files\Qualcomm\QPST\bin\Firmware\prog_emmc_firehose_8939.mbn and select
8) Load XML: browse to C:\Program Files\Qualcomm\QPST\bin\Firmware and select "rawprogram0.xml" file, then select "patch0.xml" file.
9) Go to Tools and click Partition Manager
10) You will see a list with all files from partition table
11) To flash, you need select Boot.img in the list first, a mini windows will open, click on Load image and select the Boot.img placed on C:\Program Files\Qualcomm\QPST\bin\Firmware
Do the same with the rest of img files in THIS order
BOOT.img
CUST.img
SYSTEM.img
TZ.img
MODEM.img
12) Once you finish, close the partition manager. A message will appear and phone will reboot. If not, reboot manually
That's all enjoy!
FOR GR5 KII-L2X AND HONOR 5X KIW-L2X MODEL/VARIANT, FOLLOW THIS TUTORIAL
1) Download my packcage and exctract it
2) Open a cmd windows in 'Phyton + GPT Tools' folder
3) Type: GPTAnalyzer.py (drag and drop the GPT.img file previously downloaded from 5.1 firmware) and click Enter
4) Copy all results in cmd, paste on notepad and save as 'Partition0.xml' (start with <?xml version... and finish on </configuration>)
5) Type GPTParseTool.py -x (drag and drop the partition0.xml created) and click enter
6) Go to phyton folder and move all created files to C:\Program Files\Qualcomm\QPST\bin\Firmware
7) Now you can continue with the guide
Thats all my friends, hope you get a new life for your Huanor GR5X
PLEASE IF I HELP YOU, BUY ME A COFFE HERE
Reserved
GOOD guide!someone will need it!
my question:does it work on the locked phone?
wsdyleon said:
GOOD guide!someone will need it!
my question:does it work on the locked phone?
Click to expand...
Click to collapse
Thanks!
Locked and unlocked devices.
My dear friend, there is no python tools folder in your package. i can't unbrick my phone with your xml files, its a KLL-L21.
Best of regards.
faabricjs said:
Thanks!
Locked and unlocked devices.
Click to expand...
Click to collapse
I cant find python + GPT tools
faabricjs said:
Thanks!
Locked and unlocked devices.
Click to expand...
Click to collapse
my device is not showing up I have removed the battery and connected the usb but nothing happens only the device vibrates and huawei logo apears but nothing on my pc
Ibrahim Tariq said:
I cant find python + GPT tools
Click to expand...
Click to collapse
Here you will find all files needed and instructions
You have to open the phone and put it in EDL mode
Search Google for that
https://forum.hovatek.com/thread-31505.html
snazzyman89 said:
My dear friend, there is no python tools folder in your package. i can't unbrick my phone with your xml files, its a KLL-L21.
Best of regards.
Click to expand...
Click to collapse
Ibrahim Tariq said:
my device is not showing up I have removed the battery and connected the usb but nothing happens only the device vibrates and huawei logo apears but nothing on my pc
Click to expand...
Click to collapse
See my reply in previous post #8
---------- Post added at 02:15 AM ---------- Previous post was at 02:06 AM ----------
Can't we use Huiye Download Tool to flash all the images ?
what if i dont have system.img in my firmeware ? what should i do ? i have firehose from b321 can this be compatible with b330?
EDIT : i found the sys.img for b321
friends help me out i have KiW L21 superbricked unable to charge battery and he dont show up in device manager as qloader 9008

OneUI 4 Beta Update Link - India (Beta 2 Update is live - Dec Security Patch)

Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app.
Beta 1:
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Beta 1 Mirror: https://klisza1993.synology.me:1000.../J4ukGm08evreR1dYWbOQxngvuPTbTvJh-qb4gj3eTDgk
Beta 1 Mirror:
Note 20 Ultra One UI 4 Beta - Google Drive
drive.google.com
Checksum to verify corrupt downloads:
MD5 : 54db93183aa24ecdfaa7134891022094
Beta 2 Update: http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/698c78dfebf8472d9e1691413b9af2f2.bin?px-time=61ed489c&px-hash=5f86741823355625dacb429abc4ff6cf&px-wid=3281729-WSA211124122250&px-wctime=2021-11-24 12:22:50&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Prerequisite to flash beta on N20U (N986B) thanks to
dr.ketan​
You need to be on November Security patch before moving ahead.
Dial *#1234#
If your info is ditto same as said below then only you can flash beta 1 for N986B
AP : N986BXXS3DUJ6
CSC : N986BOXM3DUH5
CP : N986BXXS3DUIF
Also if your device is rooted/modified, it will fail. (unlocked bootloader isn't issue but firmware must be complete stock)
TLDR instructions, thanks to pernodpepper
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Detailed instructions along with multiple methods to install. Thanks to Evil_Smiley_za and @AhmedMomen
UPDATE:
-This thread will be for sharing tips and help and update.zip/.bin files (when/if available) for the OneUI 4.0 Android 12 Beta for the Galaxy Note 20 series (Unlocked/Exynos)
Installation Methods:
ADB-method:
1. Download SDK platform tools https://developer.android.com/studio/releases/platform-tools
2. Extract the file in your desktop.
3. Inside the extracted folder put the update.zip file
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown your phone and connect it to the pc
6. Holding Power and volume+ and enter into recovery mode.
7. Select "update via ADB". (scroll down using the volume buttons and select using the power button).
8. Connect the phone to a PC using an original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options on your pc you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Connect any USB device to your device, AKG earphones could work, then press Power and volume+ buttons to get into recovery mode.
5. Using your volume keys navigate to "update via sdcard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes installing. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
There are two methods that you can use to get into recovery mode
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Power+VolumeUp buttons and keep pressing them until you enter recovery mode.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
It's recommended to make a backup of your data before updating to the Android 12 Beta.
Important Notes:
-Rename the .bin file to update.zip in order to be able to flash it from recovery.
-A common mistake done by some people is that they see the file named update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, So make sure you do it right.
-Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released later for your original CSC, thats most likely not happening before the BETA is over.
Note: AngryPixel89 is my reddit alias.
is it OXM?
antisocialbratt said:
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app. its a 2.5gb update. Use it at your own risk and please ask other senior members if you have doubts. I just followed instructions someone else shared to grab that link for you guys.
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
OXM
Click to expand...
Click to collapse
Yes. It is INS OXM
antisocialbratt said:
Yes. It is INS OXM
Click to expand...
Click to collapse
Awesome
Can someone share the installation process please
Most probably you will have to flash it using Odin but I wouldn't guarantee that. Wait for some time till some modders here figure out a way.
waseem.gani said:
Can someone share the installation process please
Click to expand...
Click to collapse
First make sure you are on November patch
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Maybe this help
Just rename it to update.zip and intall from recovery mode (i was in the latest build with november security patch)
works fine, thank you for the upload.
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Inxteros said:
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Click to expand...
Click to collapse
November
Does reguset full wipe or is not needed ?
My bad I was not able to flash it via recovery,any help would be appreciated. I am on October patch.
pernodpepper said:
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file in internal storage
4. Go to recovery (No odin/download mode required)
5. Flash update.zip
6. Profit
Click to expand...
Click to collapse
I can't see internl storge in the recovery
B.Gaboo said:
(i was in the latest build with november security patch)
You was on DUJ6/DUH5/DUIF?
Click to expand...
Click to collapse
N986BXXS3DUJ6
and installed from the external storage
waseem.gani said:
I can't see internl storge in the recovery
Click to expand...
Click to collapse
You need to use an sdcard and place the zip there
By any chance do you have Update.zip file for SM-G986B??
Rapier said:
You need to use an sdcard and place the zip there
Click to expand...
Click to collapse
Tried that as well, but don't know what the issue is
Amittey said:
By any chance do you have Update.zip file for SM-G986B??
Click to expand...
Click to collapse
This tread is for the SM-N986B. The note 20 Ultra only....

Categories

Resources