I push power + volume and see "Downloading.. Do not turn off target!!"
and waiting, and waiting...
Related
my htc hd2 give start upp error HTC HD2 MicroP Error. in bootloder also disply it . now phone start without backlight display.
----Try---- to reset facotry setting (clear storage).. and since u dont have display light.. so try tothe buttons.
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
Performing a factory reset using phone buttons
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Moustafa217 said:
----Try---- to reset facotry setting (clear storage).. and since u dont have display light.. so try tothe buttons.
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
Performing a factory reset using phone buttons
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
bro i i have done the step but no luck ..
well then u have to flash it.. or try your guarantee service.. tell them ur screen doesnt work.. and pray to god they wont realize its a flashed device.
Please delete this post if it has already been written somewhere...
I just discovered how to get the "Downloading... Do not turn off target!!!" - screen.
Turn off the phone. Wait 10sec.
Press and hold task switch button + volume down and press power button shortly.
You can leave this mode by pressing power button for about 10sec.
what does this setting do?
on that screen the phone is ready to get new firmware.
if you are not doing any updates and got the screen accidentally you can safely switch off the phone.
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
make sure phone is off then only press volume - button and then press power button.
it sounds like your waiting to long to hold the vol down and power button. you need to do that before the splash screen pops up, if the splash screen shows up its already to late. pull the battery out & then place it back in..hold power for just a split second and then press vol down. im not sure why but this seems to boot a little quicker for me doing it this way then holding power and vol down at the same time from the start.
Still no luck.
Remove the battery.
Press and hold "Vol down" key
Press Power for 2 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 4 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 8 sec.
Wait for 10 + sec. nothing happens.
Phone powers up.
"Stick Tgether"
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
Guy....just HOLD VolDown and press SHORT power button.
Are you sure your volume down button works?
It doesn't matter if you short press or long press the power button it works either way the main thing is the phone has to be completely off before first pressing and holding the volume down button and while it is still down press the power button and keep the volume down pressed until bootloader screen appears.
You can also try, with the phone off or on, press the volume down button and then press something into the reset button under the battery door quickly and keep holding the volume down button.
If none of these work let me know exactly what happens after you try these. Where does it go, does it start Android?
Sent from my HD2 using XDA App
It looks like the problem is the volume button.
I let the phone boot normally.
I noticed if I press the volume up button then the animation for vluome come up on the screen but if I press the volume down button animation does not appear.
Therefore, when I hold the volume down and press reset button, phone boots normally. I guess I am out of luck?
I am not sure how to bypass this problem but there have been others with your same problem search the other general forums for volume down button broken or something like that and I am sure there is some way to remap your buttons
Sent from my HD2 using XDA App
I don't think that you can remap it so it works on that early time on bootup.
baboog said:
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
Click to expand...
Click to collapse
Try to hold down both UP + DOWN vol and then press POWER. Keep on holding it until you see the TRI color screen. This is a hard reset method, hope this works.
Just curious what ROM you currently running on the phone?
when in magldr can you scroll down? if so then the volume down works. magldr wont let you charge the phone in an off state so if you can scroll down. shut off phone or pull battery and wait like 15 seconds, than hold down the volume button than plug the phone in and you should be in tri-color screen if not than you need a new phone. hope this helps a little.
How to hard-reset my Nexus4? I can not turn my Nexus4 and want to hard-reset my phone.
If it's on and you can't turn it off just hold the power button for 10 seconds. If it won't boot, get into bootloader by powering on and holding volume down.
my OP6T is bricked and I have to turn it off to repair it with the volume + - command.
How do I turn it off? There is a special combination of buttons?
Hold volume-up, volume-down, and power buttons simultaneously. After a few seconds, it should reboot. Immediately after rebooting, hold volume-down and power buttons to get to recovery. Select power off in recovery.
Nsane457 said:
Hold volume-up, volume-down, and power buttons simultaneously. After a few seconds, it should reboot. Immediately after rebooting, hold volume-down and power buttons to get to recovery. Select power off in recovery.
Click to expand...
Click to collapse
201/5000
I already tried but when I press turn off it has put the recovery mode back and now it's bricked on the screen where there is the message that says the phone is bricked.
Thanks anyway.
TheMystery29 said:
201/5000
I already tried but when I press turn off it has put the recovery mode back and now it's bricked on the screen where there is the message that says the phone is bricked.
Thanks anyway.
Click to expand...
Click to collapse
I just went through this same thing last night with my OP6. Make sure the device is unplugged from the computer, or any other power sources. Select Power Off and immediately hold the volume + button for 5 seconds and while still holding volume + plug it into your PC.
It's okay I turn off and my phone is good now.