Hello there,
I have a little dillema what to do, I need to extract recovery from update.app (TWRP is my love and i will flash it later, but I need to update my system with stock recovery). I have everything required, but... I met a little problem https://ibb.co/nBhKLF I have 2 recovery images... and I have no idea which one should i flash
Please help i don't want to flash wrong image (again )
Flash to recovery1 (not 2) recovery2 dont boots
Recovery1 is default recovery ( vol+ and power)
Recovery2 is emergency recovery ( vol + and plug USB)
Related
Hi,
I can't boot into recovery using vol down+power but I can boot normally into OS and from there I can boot into recovery through ADB or third party apps.
I was trying to update my OP2 with new OxygenOS 3.0.2. As my device was rooted so I had to do it manually using TWRP. Till now I was able to boot into recovery by vol down+power.
Before flashing I wiped everything(dalvik+cache+system+data), rebooted into recovery and flashed the OOS3.0.2 full ROM. At this point the installation was successfull but I was not able to boot the OS, it was stuck on the loading screen. After several attempts to boot OS, I finally tried to boot into recovery to flash again, but I was unable to. When I press vol down+power for few sec, the phone switches off with a vibration.
Later I found out that I was supposed to use a modified TWRP. So I flashed the modified TWRP via fastboot and flashed the OOS3.0.2 full ROM again, Now I can boot into OS normally but still I cannot boot into recovery by vol down+power. But the interesting thing is that I can boot into recovery through ADB or third party apps.
I tried flashing the TWRP recovery again with no luck. I thought this could be a problem with boot.img which is contained in ROM itself so I also flashed the ROM again with no luck. Also I am absolutely sure that this is not a hardware issue with by volume buttons as I can use them properly when I boot into OS.
A quick thought, is it possible that the boot.img of the ROM itself is broken? Seems unlikely as I am not seeing anyone else having this issue. But if it is, is it ok to flash the boot.img from OOS2.x version ROM, will that be compatible? Just wanted to be sure before doing this.
Any other thoughts are welcome.
Are you used this command for flashing twrp??
fastboot flash recovery recovery.img
You should add "flash", otherwise it won't install twrp in your mobile
yes I used that command only
Dreckk said:
yes I used that command only
Click to expand...
Click to collapse
After flash recovery use this command it will help to boot in twrp "fastboot boot recovery.img " without quotes
yes I know that, thats how I booted into recovery from fastboot for flashing the ROM. But I should be able to boot into recovery by vol down+power. That is why I posted this question.
Will you please send me screenshot of cmd?? after flash recover
First of all, i'm a noob so please don't mind any technical mistakes.
I recently flashed RR on my device with TWRP, and all was working quite fine.
But then, I decided to try out DU, and flashed it. But my phone was stuck on the lock screen with a "com.android.phone stopped working" message.
I used ADB to wipe my data ( for if there were any conflicts) using : fastboot -w
My phone now is working fine, But i've lost root access, My phone DOESN"T BOOT INTO RECOVERY.. Holding vol+ and power just ends up in a screen with the RR logo( yes RR, even after flashing DU).
I've tried to flash TWRP using ADB again but it's not working.
ROM manager says I've got TWRP and CWM installed.
Also Kingo and Framaroot aren't working.
I would really want to get back:
1.Root access
2.TWRP
Some help will really be appreciated....
Press vol up+down and power button simultaneously, to access recovery.
I've tried that, my phone just shows the RR logo screen and nothing else.
Alternate method
dude you just need a pc with adb driver installed then go to bootloader mode by pressing vol- and power button, then using adb command write (fastboot boot recovery.img).
Here recovery.img is ur twrp recovery or other,then it will flash recovery.img in ur phone and automatically go into the (twrp) recovery.
(u need to copy recovery.img in ur adb folder before u write that command)
I have done that... It does flash twrp onto my phone..but my still doesnt boot into twrp...
then use another recovery, sevenmax twrp recovery is the best.
Hey guys!
My Hardware:
Huawei VNS-L21
Windows PC
I've flashed the oeminfo of a Huawei VNS-L31 on my VNS-L21 (followed this guide: http://www.htcmania.com/showpost.php?p=23861935&postcount=2) and after that, I've installed B100 rom via DLOAD-Method. Everything worked fine. Then I wantet to upgrade to Nougat (B336), so I downloaded the ROM and the L31 Data (because I've previously flashed the oeminfo of a VNS-L31, mentioned before). I've done that in the Revolution recovery b. 8. Flashing the main system worked fine, but flashing the data failed. I don't know why (maybe I didn't have enugh patience) but I rebootet anyway. Now I have the problem that I can neither boot to the system nor boot to recovery. However, I am able to access fastboot and I am able to flash recovery, system, cust and boot. I've tried flashing the B336 rom via fastboot (flashing system.img, boot.img, recovery and recovery2 from the extracted firmware and cust.img from the extracted data folder), but I'm still not able to boot. My phone is stuck in the "Your device has been unlocked and can't be trusted" screen as seen in the attachment. I've tried meticulu's twrp and revolution recovery, they also fail to boot (I also get to the "Your device has been unlocked and can't be trusted" screen.)
Hopefully you can help me.
Best regards,
- 4240 Benny
try the next power on you phone whit the 3 buttons, if see mui recovery say me
Slider324 said:
try the next power on you phone whit the 3 buttons, if see mui recovery say me
Click to expand...
Click to collapse
Doesn't work, I've tried that several times
Try to get a recovery running.
So try to flash different recoveries (Meticulus TWRP or Revolution Recovery) with fastboot (fastboot flash recovery *.img)
Flashing N recovery like this *should* work.
Report back then for next steps.
Schlengge said:
Try to get a recovery running.
So try to flash different recoveries (Meticulus TWRP or Revolution Recovery) with fastboot (fastboot flash recovery *.img)
Flashing N recovery like this *should* work.
Report back then for next steps.
Click to expand...
Click to collapse
I've tried Revolution recovery and meticulu's TWRP, both don't seem to work. When I try to boot to recovery I do get the "Your device has been unlocked.." screen...
Well, i wanna flash 8.0 via dload but when i try forcing all 3 buttons it won't start updating android, it will enter in TWRP. Anyone know fix?
You'll need to install the stock eRecovery first.
DeathBell said:
You'll need to install the stock eRecovery first.
Click to expand...
Click to collapse
can you tell me how to install stock eRecover ??
sujon0 said:
can you tell me how to install stock eRecover ??
Click to expand...
Click to collapse
normally, erecovery should run parallel to twrp. when i use 3 button mode, erecovery starts. if i use vol+ & power button, twrp starts. maybe you release the 3 buttons to fast ? it take a very long time, starting erecovery. hold your 3 buttons 40 seconds! then u will normally enter EMUI install mode.
Use huawei update file extractor and extract stock eRecovery.img and recovery.img from donloaded update file(update. App)
Then u can use fastboot
Reboot to bootloader and flash erecovery an recovery partition using fastboot and stock extracted img files
Then go for dload method and success ?
I have to say after successfull flash, ur bootloader will be locked again (no data wipe)
HELP , I am stock stuck on logo after I flash panadriod rom now I have flashed pda twrp but twrp is not opening stuck on logo only , I am on fastboot please help flashing twrp but not booting
farhan20 said:
HELP , I am stock stuck on logo after I flash panadriod rom now I have flashed pda twrp but twrp is not opening stuck on logo only , I am on fastboot please help flashing twrp but not booting
Click to expand...
Click to collapse
1. Obviously you need to have your phone bootloader unlocked and enabled USB Debugging.
2. Connect your phone to PC
2. Reboot to Fastboot using Volume Down+Power button
3. On your PC, navigate to the 4PDA TWRP folder
4. Start the Flash_TWRP.bat file (as Administrator just to be sure)
5. Follow the instructions in the CMD window
6. After TWRP Flash, reboot into recovery (Press Volume up Button+Power button)
in TWRP format data
reboot to twrp again in recovery
7. Flashe your Rom of choice
8. Rebooted and let the ROM load (have patience, first time takes pretty long!)
9. Follow and complete setup