Well, i wanna flash 8.0 via dload but when i try forcing all 3 buttons it won't start updating android, it will enter in TWRP. Anyone know fix?
You'll need to install the stock eRecovery first.
DeathBell said:
You'll need to install the stock eRecovery first.
Click to expand...
Click to collapse
can you tell me how to install stock eRecover ??
sujon0 said:
can you tell me how to install stock eRecover ??
Click to expand...
Click to collapse
normally, erecovery should run parallel to twrp. when i use 3 button mode, erecovery starts. if i use vol+ & power button, twrp starts. maybe you release the 3 buttons to fast ? it take a very long time, starting erecovery. hold your 3 buttons 40 seconds! then u will normally enter EMUI install mode.
Use huawei update file extractor and extract stock eRecovery.img and recovery.img from donloaded update file(update. App)
Then u can use fastboot
Reboot to bootloader and flash erecovery an recovery partition using fastboot and stock extracted img files
Then go for dload method and success ?
I have to say after successfull flash, ur bootloader will be locked again (no data wipe)
Related
Hey guys!
My Hardware:
Huawei VNS-L21
Windows PC
I've flashed the oeminfo of a Huawei VNS-L31 on my VNS-L21 (followed this guide: http://www.htcmania.com/showpost.php?p=23861935&postcount=2) and after that, I've installed B100 rom via DLOAD-Method. Everything worked fine. Then I wantet to upgrade to Nougat (B336), so I downloaded the ROM and the L31 Data (because I've previously flashed the oeminfo of a VNS-L31, mentioned before). I've done that in the Revolution recovery b. 8. Flashing the main system worked fine, but flashing the data failed. I don't know why (maybe I didn't have enugh patience) but I rebootet anyway. Now I have the problem that I can neither boot to the system nor boot to recovery. However, I am able to access fastboot and I am able to flash recovery, system, cust and boot. I've tried flashing the B336 rom via fastboot (flashing system.img, boot.img, recovery and recovery2 from the extracted firmware and cust.img from the extracted data folder), but I'm still not able to boot. My phone is stuck in the "Your device has been unlocked and can't be trusted" screen as seen in the attachment. I've tried meticulu's twrp and revolution recovery, they also fail to boot (I also get to the "Your device has been unlocked and can't be trusted" screen.)
Hopefully you can help me.
Best regards,
- 4240 Benny
try the next power on you phone whit the 3 buttons, if see mui recovery say me
Slider324 said:
try the next power on you phone whit the 3 buttons, if see mui recovery say me
Click to expand...
Click to collapse
Doesn't work, I've tried that several times
Try to get a recovery running.
So try to flash different recoveries (Meticulus TWRP or Revolution Recovery) with fastboot (fastboot flash recovery *.img)
Flashing N recovery like this *should* work.
Report back then for next steps.
Schlengge said:
Try to get a recovery running.
So try to flash different recoveries (Meticulus TWRP or Revolution Recovery) with fastboot (fastboot flash recovery *.img)
Flashing N recovery like this *should* work.
Report back then for next steps.
Click to expand...
Click to collapse
I've tried Revolution recovery and meticulu's TWRP, both don't seem to work. When I try to boot to recovery I do get the "Your device has been unlocked.." screen...
Hi all!
I have the CAN-L11 and i flashed the twrp.
After the reboot the phone, i see that i have a bootloop. Stay´s on Huawei logo.
I already tryied to install huawei official ota updates, morphs backup, and 1 or another more method and nothing done. I didn´t have my own backup :crying:
Someone can help me? Sorry for my bad english
Catchipuchi said:
Hi all!
I have the CAN-L11 and i flashed the twrp.
After the reboot the phone, i see that i have a bootloop. Stay´s on Huawei logo.
I already tryied to install huawei official ota updates, morphs backup, and 1 or another more method and nothing done. I didn´t have my own backup :crying:
Someone can help me? Sorry for my bad english
Click to expand...
Click to collapse
Try download any ota update with firmware finder, extract the recovery.img from ota You have downloaded (You can extract it with Huawei extract tool), flash the extracted recovery with fastboot, put the update.app on dload folder in the Root of sdcard and flash it with the 3 keys method.
You will be able to successfully install the ota only if you extract recovery from ota You whant to install. Don't skip the extracting recovery step! If the ota install 100% and the phone stays again in bootloop, restart the phone into recovery mode (press the volume up + power key at the same time while the phone bootloops till will turn off and power up again, when the phone start up quickly release the keys) do a factory reset and wipe cache.
mArIuS% said:
Try download any ota update with firmware finder, extract the recovery.img from ota You have downloaded (You can extract it with Huawei extract tool), flash the extracted recovery with fastboot, put the update.app on dload folder in the Root of sdcard and flash it with the 3 keys method.
You will be able to successfully install the ota only if you extract recovery from ota You whant to install. Don't skip the extracting recovery step! If the ota install 100% and the phone stays again in bootloop, restart the phone into recovery mode (press the volume up + power key at the same time while the phone bootloops till will turn off and power up again, when the phone start up quickly release the keys) do a factory reset and wipe cache.
Click to expand...
Click to collapse
I flash the recovery.img and put the update on dload folder. I turn on in recovery and says installing update, but on 40% says installation failed. I install system.img by fastboot sucefull but staying on bootloop :/
https://forum.xda-developers.com/nova-plus/how-to/downgrade-l11c432b320-emui5-7-0-to-t3544907/page3
While rolling back from N to MM my phone started bootlooping. I was facing this problem few times so I thought I could fix it like always. But there is one problem. I'm unable to flash any rom from fastboot or recovery. The only recovery that works is Nougat Revolution Recovery. When I try to flash I get errors and info: failed to mount version / vendor / product. I wanted to wipe those partitions but they are gone....
Does anyone know what to do? I'm pretty much clueless now...
1st,wipe system, boot. extract update app with huawei update extractor. go to custom recovery, flash stock boot IMG and stock recovery IMG. Power off, use three button dload method, reboot, when booting press vol up for three second, now you are in e-recovery. Press shutdown. Press and hold power and vol up for stock recovery. Do factory reset. If need do the factory reset 2/3 times. Now you are with locked bootloader.
Sent from my NEM-L21 using Tapatalk[/QUOTE]
Sent from my NEM-L21 using Tapatalk
Anonda said:
1st,wipe system, boot. extract update app with huawei update extractor. go to custom recovery, flash stock boot IMG and stock recovery IMG. Power off, use three button dload method, reboot, when booting press vol up for three second, now you are in e-recovery. Press shutdown. Press and hold power and vol up for stock recovery. Do factory reset. If need do the factory reset 2/3 times. Now you are with locked bootloader.
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
Sent from my NEM-L21 using Tapatalk[/QUOTE]
Same problem here i have huawei p9 lite vns l21 2gb ram
I have no os no vendor no product
Bootloader unlock
Fastboot worked
I have twrp v3.1.1. Of team open kirin edition
Last time i am at nougat b360 firmware
What should i do
I managed somehow to revert back to stock from these errors on VNS-L21:
1) download b360 stock from http://4pda.ru/forum/lofiversion/index.php?t806696-1680.html (consists of 2 files)
2) download HUAWEI Multi-Tool
3) extract 2 UPDATE.APP files from zip files of stock rom
4) extract image files from the large UPDATE.APP file by HUAWEI Multi-Tool -> Unbrick -> Launch Huawei Update Extractor
5) boot the phone into fastboot mode by power / vol - and connect the phone to PC
6) HUAWEI Multi-Tool -> Unbrick ... flash everything
7) copy the large UPDATE.APP file to SD\dload and reboot with power / vol + / vol - ... phone installs update
8) copy the small UPDATE.APP file to SD\dload and reboot with power / vol + / vol - ... phone installs update
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
ahmetk711 said:
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
Click to expand...
Click to collapse
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
hatib237 said:
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
Click to expand...
Click to collapse
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
ahmetk711 said:
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
Click to expand...
Click to collapse
So after flashing i should go in recovery and do what
hatib237 said:
So after flashing i should go in recovery and do what
Click to expand...
Click to collapse
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
Ok i and to access recovery the button is volume up + home +power right
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
hatib237 said:
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Click to expand...
Click to collapse
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
g900h said:
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
Click to expand...
Click to collapse
will the 3.2.1 work on 7.1.1 c9000 HK
hatib237 said:
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
Click to expand...
Click to collapse
Ok, do the 3button combination as if you are booting into download mode. As soon as screen goes black, keep power and home key pressed down but move to volume up. You have to be quick before it boots to download. This will get you to recovery.
SM-N950U Chimera Rom 2.0
hatib237 said:
will the 3.2.1 work on 7.1.1 c9000 HK
Click to expand...
Click to collapse
Yes 100% Tested.
but Im not sure its work on oreo(8)
Without root
Twrp how i flash withoit root i want my device back help me i flash all time file combination file repiar firmaware but nothing work agian show recovery booting
Hi. my huawei p9 lite vns-l22 it gets stuck in your device is booting now.
And no, drain the battery dont works in this case.
And i can enter in my custom recovery TWRP, or in the bootloader.
Only in the stock recovery and the update mode.
Please i need help. And sorry for my bad english.
Veget4 said:
Hi. my huawei p9 lite vns-l22 it gets stuck in your device is booting now.
And no, drain the battery dont works in this case.
And i can enter in my custom recovery TWRP, or in the bootloader.
Only in the stock recovery and the update mode.
Please i need help. And sorry for my bad english.
Click to expand...
Click to collapse
Hi dude,
if you're on stock rom try this:
reboot in bootloader/fastboot mode, connect the device to your PC,
open the prompt and type fastboot reboot.... you should solve.
Instead if you're on custom rom let me know.
If you installed some software/app and stucked into bootlooping,
you should be aware of which app you installed last and booting in recovery mode (TWRP)
try to delete it manually.
Cheers
Well
Dadditz said:
Hi dude,
if you're on stock rom try this:
reboot in bootloader/fastboot mode, connect the device to your PC,
open the prompt and type fastboot reboot.... you should solve.
Instead if you're on custom rom let me know.
If you installed some software/app and stucked into bootlooping,
you should be aware of which app you installed last and booting in recovery mode (TWRP)
try to delete it manually.
Cheers
Click to expand...
Click to collapse
Thats the problem.
I can enter in the bootloader, the phone have the TWRP, are now whats happen but i can enter in the custom recovery.
The screen turns black and grey.
youtube com/watch?v=h9oMBpD0MZQ&feature=youtu.be
The phone dont have a custom rom, is the stock rom.
I erase the system and data in the TWRP, because a problem with my google acount in the phone. but it was worse for the phone.
The only thing i have to do is enter in the stock recovery, and the software installer(vol+ vol - and power).
I cant use the ADB minimal and fastboot. The phone is reconized by the PC, but the program no.
I think this is the only possibility, i download many firnwares, but in all the screen shows "Software install failed incompatible with current version"
In the 3% or 10%.
Veget4 said:
Thats the problem.
I can enter in the bootloader, the phone have the TWRP, are now whats happen but i can enter in the custom recovery.
The screen turns black and grey.
youtube com/watch?v=h9oMBpD0MZQ&feature=youtu.be
The phone dont have a custom rom, is the stock rom.
I erase the system and data in the TWRP, because a problem with my google acount in the phone. but it was worse for the phone.
The only thing i have to do is enter in the stock recovery, and the software installer(vol+ vol - and power).
I cant use the ADB minimal and fastboot. The phone is reconized by the PC, but the program no.
I think this is the only possibility, i download many firnwares, but in all the screen shows "Software install failed incompatible with current version"
In the 3% or 10%.
Click to expand...
Click to collapse
Wow, you erased system and data ? that's the reason because it will not boot dude.
Fortunately fastboot mode and twrp works and i think that will help you
bring your device back to life.
Do you remember latest firmware of your device ?
Which TWRP version are on ?
mmm
Dadditz said:
Wow, you erased system and data ? that's the reason because it will not boot dude.
Fortunately fastboot mode and twrp works and i think that will help you
bring your device back to life.
Do you remember latest firmware of your device ?
Which TWRP version are on ?
Click to expand...
Click to collapse
Firnware version mmm.
I dont remenber the firnware version.
Are now this help, but the phone in Fing(an app to see who is in your WiFi network).
The Phone model are G9. A P9 Lite G9. Is a VNS-L22 of latin america(i think).
And the phone is in Android 6.0 stock, and the TWRP version is 3.1.0-2
Fastboot mode ?
The vol + vol - and power combination ?
And no, the TWRP dont works, dont enter in there. The phone stucks entering in the custom recovery. But the stock recovery works. The custom no, the stock yes.
Veget4 said:
Firnware version mmm.
I dont remenber the firnware version.
Are now this help, but the phone in Fing(an app to see who is in your WiFi network).
The Phone model are G9. A P9 Lite G9. Is a VNS-L22 of latin america(i think).
And the phone is in Android 6.0 stock, and the TWRP version is 3.1.0-2
Fastboot mode ?
The vol + vol - and power combination ?
And no, the TWRP dont works, dont enter in there. The phone stucks entering in the custom recovery. But the stock recovery works. The custom no, the stock yes.
Click to expand...
Click to collapse
You flashed the TWRP but don't work ?
Fastboot mode is bootloader mode so.....
what happen if you turn off the device and restart it
holding vol - and power button until it boot into system/bootloader ?
And vol + vol - and power buttons = three buttons aka DLOAD method are used to flash a firmware
but only in android 6.
Without know the latest firmware you was running on your device
it's very difficult to revive the phone, regardless of the type of device...
Another way to try to revive the phone is a rebrand but it is a bit difficult
and you need the correct files with a working TWRP...
Sorry dude i think i cannot help you anymore...
I wish you the best
Dadditz said:
You flashed the TWRP but don't work ?
Fastboot mode is bootloader mode so.....
what happen if you turn off the device and restart it
holding vol - and power button until it boot into system/bootloader ?
And vol + vol - and power buttons = three buttons aka DLOAD method are used to flash a firmware
but only in android 6.
Without know the latest firmware you was running on your device
it's very difficult to revive the phone, regardless of the type of device...
Another way to try to revive the phone is a rebrand but it is a bit difficult
and you need the correct files with a working TWRP...
Sorry dude i think i cannot help you anymore...
I wish you the best
Click to expand...
Click to collapse
A the fastboot is the bootloader.
I think it was a different things.
I still try to fix this phone.
Well, thanks for the help
Veget4 said:
A the fastboot is the bootloader.
I think it was a different things.
I still try to fix this phone.
Well, thanks for the help
Click to expand...
Click to collapse
you fixed this problem? I have same phone so i want to fix your phone if it still stuck.