Hello guys please help me i have a problem with the galaxy s4 i9500 i have not rom i have no recovery i only go to the download mode but the device is not recognized and the device is not recognized. Please help me i'm afraid to lose your phone Give me:crying:
mrz2014 said:
Hello guys please help me i have a problem with the galaxy s4 i9500 i have not rom i have no recovery i only go to the download mode but the device is not recognized and the device is not recognized. Please help me i'm afraid to lose your phone Give me:crying:
Click to expand...
Click to collapse
What's going on bro?
What are u facing with?
When I get my device in odin mode and connect the device to my computer, the message device not recongized
Drivers for android
Try downloading the drivers for your phone on this link
Copy and paste the link
developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Then try the download mode again
Please hit the thanks button if helpful
Hi, I tried this way, but did not work and showed the device not recognized
Have tried...
• Different USB cables
• Different PCs
...?
Sent from my Redmi 3 using XDA Labs
Hi, I've tested a lot of computers and many different cables, but again I see the device not recognized
Hi, I found my problem. My problem with the phone is hardware, but I do not know what the usb circuit on the main board is. Does anyone know this circuit to help me out?
Related
I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Reinstall the USB drivers on your PC and then try.
aniket.lamba said:
Reinstall the USB drivers on your PC and then try.
Click to expand...
Click to collapse
i already did that but doesnt help:crying:
I am facing that problem too.
Both mass storage and download mode is not been recognized. But it works wither other phones.
use usb jig
oden cannot read ur galaxy y
Gexg said:
I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Click to expand...
Click to collapse
sir/maam have you tried installing again the usb driver.. then turn your phone to download mode.. try this in many trials.. godbless
Minions_Army said:
use usb jig
Click to expand...
Click to collapse
How to make it? And wont it hardbrick?
Jig is for unbrick,so it cant brick your device,look in general section for it or on facebook,ive and some others posted info about it.
GREETZ FROM TEAM-OPTIMA!!!
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Gexg said:
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Click to expand...
Click to collapse
or try to off your phone before connecting to pc then go to odin mode while connecting to pc.
Uninstall the USB drivers, and reinstall the newest version.
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Steps Parku said:
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Click to expand...
Click to collapse
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Still Not Helpful.
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Steps Parku said:
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Click to expand...
Click to collapse
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Same Problem...
Steve, did you solve the problem? If yes, how did you solve it?
I have the same problem with my Blu Life Pure XL, which is a similar phone.
Regards,
Ricardo
Steps Parku said:
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Click to expand...
Click to collapse
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
hey.
I have this problem with my e7 ,
could you fix it , please ?
I have the same problem with zte nubia z7max, so its qualcomm issue that has rarely been talked about and I couldn't find any solution to it at all too.
if find one,let me know plzzzz.
thnx
I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think
My I9500 on normal mode conected to pc sucesfully but on Download Mode not !!
I used another cable and pc but not connected yet..
im sure that this is software problem on phone...
what i can do..?
Pls Help me brothers...
gachineh said:
My I9500 on normal mode conected to pc sucesfully but on Download Mode not !!
I used another cable and pc but not connected yet..
im sure that this is software problem on phone...
what i can do..?
Pls Help me brothers...
Click to expand...
Click to collapse
It's not a software problem on phone.
- Make sure to install correct drivers
- Different usb port
- Different usb cable
That should solve it.
No Dear . No !
I am using my pc for any phone in any brand...!
have not problem with any phone . this one only !!!
i changed pc and cable...!
I found this problem too guys.., its happen with my S4. i dont understand exactly whats going on with my Handheld or PC, i use Windows 8.1, then i try to reinstall the driver n then re attach my phone, n then it solved. But its really make me crazy when it happening again an hour after.. 4
And I really appreciated if anyone can help me for solving this, and please i am sorry for my bad english..
Hello guys !
Well, it's been months since I have the issue and hopefully you will find me a solution I have a Samsung S4 I9500 that doesn't show on computer. Even when I try to debug some Android application with it I can't, Impossible to install. When I plug it with cable, a popup shows up saying that the new device didn't install correctly. It's on lollipop 5.0.1. I tried with different cable, different systems and different computer, the problem persists..... I already installaed usb application + kies .... No luck
Please help me out guys !
Thanks !
splitzyo said:
Hello guys !
Well, it's been months since I have the issue and hopefully you will find me a solution I have a Samsung S4 I9500 that doesn't show on computer. Even when I try to debug some Android application with it I can't, Impossible to install. When I plug it with cable, a popup shows up saying that the new device didn't install correctly. It's on lollipop 5.0.1. I tried with different cable, different systems and different computer, the problem persists..... I already installaed usb application + kies .... No luck
Please help me out guys !
Thanks !
Click to expand...
Click to collapse
Then it's either a dirty usb port or a broken usb port.
splitzyo said:
Hello guys !
Well, it's been months since I have the issue and hopefully you will find me a solution I have a Samsung S4 I9500 that doesn't show on computer. Even when I try to debug some Android application with it I can't, Impossible to install. When I plug it with cable, a popup shows up saying that the new device didn't install correctly. It's on lollipop 5.0.1. I tried with different cable, different systems and different computer, the problem persists..... I already installaed usb application + kies .... No luck
Please help me out guys !
Thanks !
Click to expand...
Click to collapse
Hi splitzyo,
To know for certain yu can try another
samsung device if it recognizes by computer
or friend Samsung device
If it's Ok for the other samsung
Then yu plug your S4 i9500 to pc & wait for result
Hi yanis 488,
Thank you for your reply. I did try other samsung devices, it worked ...
It charges perfectly when I plug in computer, so I don't think the USB is broken lennyz1988.