Database Users

Need help asap! No wake ups from sleep!!!

Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.

batuhur said:
Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.
Click to expand...
Click to collapse
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards

izmaelzx said:
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards
Click to expand...
Click to collapse
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx

batuhur said:
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx
Click to expand...
Click to collapse
Try flashing OD4 this time ticking auto reboot, re-partition, bootloader update, and f reset time, but without flashing the pit file, only the tar.md5 (if so) in AP. As i know the pit for china differs from other countries cause that, google and some bloatwate, and as far i know, OD7 firmware doesn't come with an seperate pit file. You must factory reset before doing this.
Regards.

[Q] N9005 Lollipop boot loop

Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help

Look for instructions regarding soft brick, you'll just have to reflash via odin.

mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help
Click to expand...
Click to collapse
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.

Joku1981 said:
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.
Click to expand...
Click to collapse
thank you for the reply, am downloading this one...N9005XXUGPOF3...from Nordic countries...will it remove the AT&T bootloader

Device is bricked!!!!!

Please help! I'am using model SM-N900. Today, I wanted to downgrade from my 5.0 custom ROM to stock 4.4.2. I downloaded the 4.4.2 firmware and opened ODIN. I selected AP mode and selected the .tar.md5 file I extracted and it loaded it up. I booted the phone into download mode. I selected auto reboot and F. Reset time. I clicked start and it started. It went along well until it got to system.img in which it stopped and failed. Now I tried a lollipop image, and it came up with the same result. I tried flashing the TWRP image and it flashed successfully. I was able to boot into TWRP and use it. I now tried flashing a custom rom. I tried a AOSP lollipop rom, 5.0 TW rom, and a 4.4.2 TW rom and they all booted to a black screen. I'am now desperate to fix my seemingly bricked device so somebody out there, please help! Thanks in advance.

I also tried flashing a bootloader I found somewhere in XDA for the N900 and I'm still able to flash TWRP and use it and access download mode but it hasn't changed my problem.

justinxfan said:
I also tried flashing a bootloader I found somewhere in XDA for the N900 and I'm still able to flash TWRP and use it and access download mode but it hasn't changed my problem.
Click to expand...
Click to collapse
What bootloader was you using and what one have you tried to flash
Sent from my SM-N920F using Tapatalk

I'am not sure what bootloader I was trying to use before but I was on a custom lollipop TW rom so maybe its a lollipop bootloader? I flashed the one linked here: http://forum.xda-developers.com/galaxy-note-3/general/safe-to-downgrade-ll-to-kk-sm-n900-t3016966

UPDATE
TWRP factory reset and other wipe functions except cache wip are no longer working the wipe completes with a blue error. Was it because I accidentally checked nand erase all in TWRP?

justinxfan said:
UPDATE
TWRP factory reset and other wipe functions except cache wip are no longer working the wipe completes with a blue error. Was it because I accidentally checked nand erase all in TWRP?
Click to expand...
Click to collapse
Iv an idea you flashed wrong bootloader so I would download stock lollipop Rom no root make sure you flash bootloader and modem too so download to your pc and use Odin make sure you haven't enabled reactivation lock
Sent from my SM-N910F using Tapatalk
---------- Post added at 11:37 PM ---------- Previous post was at 11:25 PM ----------
justinxfan said:
UPDATE
TWRP factory reset and other wipe functions except cache wip are no longer working the wipe completes with a blue error. Was it because I accidentally checked nand erase all in TWRP?
Click to expand...
Click to collapse
If you tried to come From a lollipop bootloader back too kk I'm afraid new motherboard Is what your looking at
Sent from my SM-N910F using Tapatalk

Device has been fixed!!!!
YESSSSSSSS
I downloaded a pit file for my device and used it along with my kitkat firmware. This time, the flash succeeded and my device booted to a message saying data is corrupt. I did a factory reset from recovery and rebooted. The device successfully booted up and now I'm up and running again and downloading all my apps and stuff. No need to swap motherboard!

congratulations mate
justinxfan said:
YESSSSSSSS
I downloaded a pit file for my device and used it along with my kitkat firmware. This time, the flash succeeded and my device booted to a message saying data is corrupt. I did a factory reset from recovery and rebooted. The device successfully booted up and now I'm up and running again and downloading all my apps and stuff. No need to swap motherboard!
Click to expand...
Click to collapse
congratulations

justinxfan said:
YESSSSSSSS
I downloaded a pit file for my device and used it along with my kitkat firmware. This time, the flash succeeded and my device booted to a message saying data is corrupt. I did a factory reset from recovery and rebooted. The device successfully booted up and now I'm up and running again and downloading all my apps and stuff. No need to swap motherboard!
Click to expand...
Click to collapse
You had a result there
Sent from my SM-A800F using Tapatalk

What exactly does a pit file do though? When I selected it it selected the re-partition option which everybody says not to use but it was the only way my device is successfully up and running again. Why do you think flashing the .pit file along with my firmware file worked?

justinxfan said:
What exactly does a pit file do though? When I selected it it selected the re-partition option which everybody says not to use but it was the only way my device is successfully up and running again. Why do you think flashing the .pit file along with my firmware file worked?
Click to expand...
Click to collapse
basically a pit file increases partition size and as yours had corrupt data the system couldn't read or rite to it so pit file allowed you to install your rom I can't believe you got away with it normally bootloader doesn't forgive but glad you sorted things
Sent from my SM-A800F using Tapatalk

Thanks a lot!

N910C EFS partition is ?corrupted? Not a single ROM boots. In dire need of help.

Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...

Nortabun said:
Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...
Click to expand...
Click to collapse
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161

mangui said:
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
Click to expand...
Click to collapse
Yea i came across this, but there was one tiny problem
how on earth am i supposed to root, get busybox, and apply usb debugging on my phone while it has no functional ROM?
and how on earth am i supposed to transfer a backup from my ROMless phone?

Do you have a pit file for repartition
If so, access twrp , wipe everything including your internal storage. Then boot into download mode.
In the computer, load the pit file and your stock coj5 into Odin 3.10 , tick "repartition" and "Nand Erase All"then click start.
Back to your phone - which now should be boot looping - access the stock recovery and wipe. Root - try using a different root method like chainfire's Odin autoroot - then twrp ur phone. Flash cm13 then start running the steps I threaded ( [fix] note 4 exynos bootloop problem ...... )
PM me for what you get
Sent from my HTC Desire 820s dual sim using Tapatalk

Might have Bricked S7 Edge SM-935FD. Need Help to recover

Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.

Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process

zzThrain is right -- I wouldn't risk flashing custom ROMs at this stage, especially because many contain new bootloaders or other stuff that might make this even worse for you. Just pick up the relevant Samsung stock ROM file (from, for example, SamMobile) and see if it boots normally again. Once it does, re-do the process *after checking all MD5s of the files you used* -- I, too, have had it happen before that a download went corrupted and I flashed it. If all is well, get into Download Mode and let Odin rip.

rixon.d9 said:
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Click to expand...
Click to collapse
Go to recovery mode & transfer rom to phone using pc. wipe cache, delvikcache, data only. No need to wipe internal sd. Install rom & reboot.
if you phone goes to recovery or download mode, no need to worry. If it doesn't go to neither recovery nor download mode, them your phone might have probably bricked.

It's my pleasure to help you if you still facing this problem

zzThrain said:
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
Click to expand...
Click to collapse
Hi
I tried flashing stock rom from sammobile. I could find for SM-935FD hence downloaded SM-935F.
It got stuck at 90% showing System in ODIN.
From the ZIP file which is the file that needs to be flashed among below ? I tried AP.
AP_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship_meta.tar
BL_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship.tar
CP_G935FXXU2DRAG_CL648265_QB8691891_SIGNED.tar
CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
HOME_CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
Now when I try again it immediately shows FAIL. Am i Flashing the right stock rom ?

It Worked. Thanks to all who helped.
I wasn't running ODIN as Admin and also was using an slightly older version V3.10.7.