Hey, I have big problem in my letv le one pro (x800)
So everything worked fine, I used 2 SIM cards
And and when I did factory reset (I wanted to sell my phone) then started problem
My SIM1 card is recognized, but no signal at all, no newtork ...
SIM2 card is not even recognized
WTF? how to fix it?? help me
This is how it looks, so only sim1 is recognized but no network or signal
http://imgur.com/a/sI5hj
fixed it with this method
http://forum.gsmhosting.com/vbb/f606/china-qualcomm-cpu-unknown-baseband-imei-null-solution-1949169/
You just need to find good working .qcn file from other same phone, and restore it on your phone, and it does work
Next question is:
1. Wifi is very weak vs my old xiaomi redmi note
is there any way to fix it?
2. Battery, over night dropped 8%, with xiaomi was 0-1 % max
Related
Hi I own a Cingular 8125 (Wizard), yesterday I did a soft reset because the phone was too slow (it wasn't turned off for about 4 weeks without restarting). When it launched it ask for my phone pasword, then for my sim PIN and took them without problems but it launched without connecting to my provider signal. Everything on the phone is working fine (WiFi-Bluetooth-PC Sync, etc...) but it keeps searching for signal.
I tried 3 different sim cards and the result was the same, then I test my sim on a friends phone and it worked fine.
The only thing I did to the phone a few weeks ago was try to use a dual sim ghost that didn't worked (it show the dual sim menu and worked fine with line 1 but when I tried to switch to line 2 it happenned just the same that is happenning now with just my sim inside, it kept looking for signal)
I did a complete reset and nothing.. happened the same, then I upgrade it's ROM to the one cingular has on it's website (http://www.america.htc.com/support/8125/software-downloads.html) it was the same one installed but it did the upgrade process anyway and NOTHING!!!
Does anyone have an idea of what could be happenning and what can I do to fix it?? I don't want to have a PDA phone just as a PDA and not phone. THanks.
Hi guys. I bought recently from a guy an S4 I9505.
When he has his sim card everything worked ok, when I put mine there was an circle with a line in it and I couldn't make any calls or send any text messages, but I've seen my contacts are there. Okay, just played with it something like 10 minutes and after all, the signal came in.
Right now, I wanted to sell it and that problem came out, when that guy put his sim in it won't make any calls.. and instead of signal bars it shows a circle with a line in it. (in settings network is unrecognized, contacts are recognized). When putting back my sim card I saw there was the same trouble, no signal at all.. no calls or messages. After a while the signal came. (something like 10 min).
Now, if i remove MY sim card and put it back it works.
But if I put another sim card (even if it's the same network) it takes 10+ minutes for signal bars to come.
It's annoying.. the guy said he bought it from UK, but he son updated his software. (he has now I9505XXUGNG8 which is from Slovenia).
Do you think that if I put UK software to it that problem would disappear ?
And how can I find out what software originally came with my phone ? I mean original region.. Kies won't work with I9505 at all..
Thanks for reading this at least, lol.
stefan2012 said:
Hi guys. I bought recently from a guy an S4 I9505.
When he has his sim card everything worked ok, when I put mine there was an circle with a line in it and I couldn't make any calls or send any text messages, but I've seen my contacts are there. Okay, just played with it something like 10 minutes and after all, the signal came in.
Right now, I wanted to sell it and that problem came out, when that guy put his sim in it won't make any calls.. and instead of signal bars it shows a circle with a line in it. (in settings network is unrecognized, contacts are recognized). When putting back my sim card I saw there was the same trouble, no signal at all.. no calls or messages. After a while the signal came. (something like 10 min).
Now, if i remove MY sim card and put it back it works.
But if I put another sim card (even if it's the same network) it takes 10+ minutes for signal bars to come.
It's annoying.. the guy said he bought it from UK, but he son updated his software. (he has now I9505XXUGNG8 which is from Slovenia).
Do you think that if I put UK software to it that problem would disappear ?
And how can I find out what software originally came with my phone ? I mean original region.. Kies won't work with I9505 at all..
Thanks for reading this at least, lol.
Click to expand...
Click to collapse
You could flash a later modem from here through Odin:
http://forum.xda-developers.com/showpost.php?p=50965837&postcount=2627
It is up-to-date with latest CSC and other stuff..
No one ?
I've downloaded the software for its region(It is from France), and still no luck.. installed a lot of modems and no luck.
Signal comes.. but it takes a while(like 2 minutes) if I install ANOTHER sim card, even if it is the same network.
It is just like it gets used to one sim.. (yeah, weird).
So.. is there anything that I can do ?
I don''t think it is hardware related.. because if I reboot the phone without changing sim card signal comes in 5-10 seconds, this happens only if I change sim card.
stefan2012 said:
No one ?
I've downloaded the software for its region(It is from France), and still no luck.. installed a lot of modems and no luck.
Signal comes.. but it takes a while(like 2 minutes) if I install ANOTHER sim card, even if it is the same network.
It is just like it gets used to one sim.. (yeah, weird).
So.. is there anything that I can do ?
I don''t think it is hardware related.. because if I reboot the phone without changing sim card signal comes in 5-10 seconds, this happens only if I change sim card.
Click to expand...
Click to collapse
I think modem has some conflict with rom or efs has some sort of corruption, backup efs and format efs then if not works
Try to flash complete firmware of your region from scratch by removing old rom, regardless of what it has. Check IMIE and modem status while it has no signal, also check by enabling airplane mode and removing your sim card and start with empty and again put your sim card then what happens?
Hit thanks if it helps...
Rom is full stock flashed 2 hours ago for Frannce (XXUFNC4), didn't change modem or anything, it is just like it came.. so it shouldn't be any conflict between the rom and its modem, lol.
About EFS.. I've heard it's risky playing around with it and I'm not evenn sure if that would solve my problem, so that wouldn't be an option.
I haave IMEI, as I said.. everything works normally if you don't change sim card. (I don't even lose signal or things like that).
EDIT: Even if network is not working, IMEI is at its place, it is available(tried even *#06# and it is showing the correct IMEI).
So, EFS it's allright? Is there any way to check if my EFS partition is "working"?
And if not, can I use EFS professional to get it working? If yes, is there any tutorial?
Thanks.
Dear all
After greetings,, I got Huawei P8 lite 1 week before , actually it's a great affordable phone in this price range . I have a comment regards the dual sim management system,sometimes when somebody calls me through second card it gives him "This Number is not reachable now , please try again latter" while through this trial i'm not talking trough the first card in that time & the card 2 signal strength in it's peak value | another times it rings normally,actually it rings if i made a dummy call from card 2 ! What is the problem come from ? I know the fact of this phone is a dual stand-by not dual active one . Card 1 working perfect as 2G/3G , no problem at all ,the problem just in card 2 (2G one). I searched over the user manual for any identification for this problem but i reach nothing ... update-> i request another sim card from my card 2 service provider and nothing changes ,the same non reachable message comes and go !
So ....?
You should try this http://forum.xda-developers.com/showpost.php?p=61401484&postcount=17
Hi, I recently bought a new Yotaphone2 (YD206) taking advantatge of the Singles' day discounts, but I am having some trouble connecting to the mobile network.
Since I did not have a nanosim available from the beggining, I started by updating its ROM (I used the last Russian one, while keeping the Chinese radio) and then I rooted it. So far so good.
The thing is, after my microsim was cut into a nanosim (the guy at the mobile phone store did it, using one of these "staplers"), I inserted it in the tray but it is not recognized on the phone. On the screen you can read "No sim card - emergency calls only".
At first I thought it was the radio, and I even flashed it again. I also went back to the original chinese rom, with no success. I think it's not a radio problem, since I can get some statistics in the *#*#4636#*#* menu, but I am not a 100% certain. Of course, I've already tried rebooting, setting the airplane mode on and off, removing and inserting the sim again, etc. Apart from that, wifi, bluetooth and everything else work as expected.
The sim card works, because using a microsim adapter I can fit it in my Nexus 4 and it gets signal. There are three options here: either the radio is not properly configured/flashed, the phone is faulty or the sim has been wrongly cut.
Could you help me troubleshoot the problem?
Solved!
Solved! It was the sim card, it was not properly cut. I used some sandpaper so sand one edge that was a bit rough. I didn't even have to reboot, the phone asked for my pin inmediately. I'm using the last EU rom with the chinese radio.
Yay! Happy!
I have the same issue now and my yotaphone 2 was bought in China... I've tried the sim cards from two companies, both didn't work. I doubt I received a defective product.
Hello,
As said in the title, mi unlock tool says me "Try again after 2 days"...
But i have got my phone since 3 weeks, using it every day...
I made two factory reset, always attach my Mi account, but problem still exist..
have you got an idea ?
Thanks
Have you been using your phone with the same SIM card all the time and with network enabled? I've got two Redmi Note 7s one ulocked as I've been told (had to wait a week), second one reset it's counter and I think it's because I only used it with wifi after attaching mi account.
I use wifi at home, mobile data at work, always with the sim card