Database Users

[Q]how to run TWRP recovery when Booting?

hi guys im totally new with G2,im with sony's device earlier.i have installed twrp recovery but the only way to run it is i have to install another apps like quick boot to run to recovery mode.when i was on sony's device i just simply press vol up button when sony's logo comes.another methods is simply tap sony's logo.but on LG G2 i can't do that.anyone know how to run to TWRP recovery when restarting the phone.this is really matter when we got stuck an bootloop or something went wrong and we need force restart and go to recovery.please help me

afrizal87 said:
hi guys im totally new with G2,im with sony's device earlier.i have installed twrp recovery but the only way to run it is i have to install another apps like quick boot to run to recovery mode.when i was on sony's device i just simply press vol up button when sony's logo comes.another methods is simply tap sony's logo.but on LG G2 i can't do that.anyone know how to run to TWRP recovery when restarting the phone.this is really matter when we got stuck an bootloop or something went wrong and we need force restart and go to recovery.please help me
Click to expand...
Click to collapse
You can get into TWRP by pressing and holding the power and volume down keys until the phone reboots, releasing them, then pressing and holding them again once the LG logo comes up. It's a little tricky and might take a couple of times to get the timing right. There will be a white screen that says "Factory hard reset" (which just means boot into recovery since the default recovery performs a factory reset). Press the power button 3 times to confirm and you'll enter TWRP.

Thanks for the info, haha Ive been using ROM manager to get me into recovery since I never knew how to get there using hardware buttons

You can also install GooManager from the Play Store. It has an option to reboot to recovery.

thank you soo much now i desire to custom my device hehee

Can't get into recovery mode

Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.

sebas156 said:
Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
Click to expand...
Click to collapse
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.

Joku1981 said:
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Click to expand...
Click to collapse
Thanks for the reply, but I don't think you understood my question. I know how to get into recovery when it all works. I've done it many times before. The problem is that it shuts down while booting into recovery, and then just reboots normally.
I only installed TWRP because CWM wouldn't work, but TWRP doesn't either. So I guess it has to do with how the device boots into recovery, regardless of what the recovery is.

Anyone? I kinda want to flash another ROM, but I'm unable to right now.

sebas156 said:
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
Click to expand...
Click to collapse
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode

MAX 404 said:
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
Click to expand...
Click to collapse
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.

sebas156 said:
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
Click to expand...
Click to collapse
may be one of the other push buttons.....
try to get into recovery with out pressing the power button and see if is possible...if so then the problem is coming from there.

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.

triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?

Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!

hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.

rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?

crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx

Can y get to fastboot ?

im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/

CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!

Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now

Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help

Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.

Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme

Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail

errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.

Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all

Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)

rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.

keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....

how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Flashed the wrong Kernel version, what now? <SOLVED>

<SOLVED>
I am still pretty new to Android and modding so be gentle..............
Should have know better. Flashed the latest Omega Kernel on my 6T while watching the kiddos practice for an upcoming belt test. I know I don't mulit task!
Flashed the Android 10 version on my Android 9 phone. Realized what I did when it would go past the bootloader unlocked warning. Eventually it went to the qualcomm dump mode then rebooted.
Now I can't get it to do anything. It is stuck on that screen. Power button does nothing. My theory is if I can get into recovery I can just flash the correct previous version of Omega that is on the phone.....but without a working power button I am stuck. Computer does not even see the phone when I plug it in.
What now?
Many thanks in advance.

Use the MSM Tool method to un brick your phone. Look for the forum in the Roms, Kernels... Section.
You're going to loose all data.

I will get over losing my data. I don't have a windows machine at the house. I will have to go to our shop to use that horrible OS. Thanks for the intel.

You can fix this issue in minutes without requiring to run MSM Tool or lose any data. I faced a similar issue myself few days ago and got it running back again by doing the follows:
Boot your device into fastboot mode, download the latest boot.img (stock or any other kernel) and TWRP and type these in command line:
1) Fastboot flash boot.img
2) Fastboot boot twrp.img
3) Your device will boot into TWRP Recovery, so flash TWRP installer zip so it sticks.
4) Reboot to recovery again and flash Magisk or Full Rom OTA.
You should be fine then.

Anwar Syed said:
You can fix this issue in minutes without requiring to run MSM Tool or lose any data. I faced a similar issue myself few days ago and got it running back again by doing the follows:
Boot your device into fastboot mode, download the latest boot.img (stock or any other kernel) and TWRP and type these in command line:
1) Fastboot flash boot.img
2) Fastboot boot twrp.img
3) Your device will boot into TWRP Recovery, so flash TWRP installer zip so it sticks.
4) Reboot to recovery again and flash Magisk or Full Rom OTA.
You should be fine then.
Click to expand...
Click to collapse
Thanks, but you missed the part where my power button is not working. The phone is stuck on the 'bootloader unlocked' warning message and the power button does nothing. No way to boot into recovery or fastboot.

PattayaGlock said:
Thanks, but you missed the part where my power button is not working. The phone is stuck on the 'bootloader unlocked' warning message and the power button does nothing. No way to boot into recovery or fastboot.
Click to expand...
Click to collapse
Is your power button broken by any chance?
If it isn't, then hold volume up + power button for a few minutes and it will reboot to Fastboot screen.
Edit: Also try volume down + power button if volume up does nothing. Make sure you hold either of the combination for a few minutes until you get a haptic feedback. Google "Boot OnePlus 6T into Fastboot mode" and follow the instructions there. Once in Fastboot, follow what I wrote in my previous reply.

Anwar Syed said:
Is your power button broken by any chance?
If it isn't, then hold volume up + power button for a few minutes and it will reboot to Fastboot screen.
Edit: Also try volume down + power button if volume up does nothing. Make sure you hold either of the combination for a few minutes until you get a haptic feedback. Google "Boot OnePlus 6T into Fastboot mode" and follow the instructions there. Once in Fastboot, follow what I wrote in my previous reply.
Click to expand...
Click to collapse
Holding the power button does nothing.
Power + down volume does nothing.
Discovered power + up button WILL turn the phone off. It also just brings it back to the "bootloader unlocked" warning page. It won't bring it to fastboot mode.
Makes sense as recovery is now part of the boot.img instead of a partition. I am assuming fastboot is also part of the boot.img. If that is the case there is no way to get into fastboot with an Android 10 kernel on my Android 9 phone. ..... I think

PattayaGlock said:
Holding the power button does nothing.
Power + down volume does nothing.
Discovered power + up button WILL turn the phone off. It also just brings it back to the "bootloader unlocked" warning page. It won't bring it to fastboot mode.
Makes sense as recovery is now part of the boot.img instead of a partition. I am assuming fastboot is also part of the boot.img. If that is the case there is no way to get into fastboot with an Android 10 kernel on my Android 9 phone. ..... I think
Click to expand...
Click to collapse
Go through my reply history. I was on 9.0.17 and had flash RadioActive kernel which was based on/for Android 10 and went into crash dump mode. Doing those steps resolved it.

Both volume buttons + power for a hard shutdown [emoji6]
Anwar Syed said:
(...) Make sure you hold either of the combination for a few minutes until you get a haptic feedback.(...)
Click to expand...
Click to collapse
Minutes? [emoji50] We don't want users dislocating their fingers [emoji51]
Wrapped with delicious Fajita [emoji896]

Timmmmaaahh said:
Both volume buttons + power for a hard shutdown [emoji6]
Minutes? [emoji50] We don't want users dislocating their fingers [emoji51]
Wrapped with delicious Fajita [emoji896]
Click to expand...
Click to collapse
Should've said seconds, my bad, but your reply is hilarious...lmao xD

Turns out holding all 3 buttons did the trick....in a weird FUBAR kind of way.
1st time it popped into fastboot. Figured what the hell, tried to reboot, nope.
2nd time just booted back to the warning screen.....okay, freaked out again.
Got back into fastboot, flashed twrp, rebooted to the warning screen. SH*T!
Got back to fastboot, flashed twrp, damn thing booted into the os as if nothing had ever happened.
Held my breath, downloaded the correct kernel, rebooted to recovery, flashed, rebooted system. Everything is good.
Guess the a/b partition maybe?
Anyway, problem solved, headache over, NO DATA LOST.
Thank you everyone!

All 3 buttons did it....in a wierd FUBAR kind of way.
1st time fastboot popped up. Figured I would try reboot, nope.
2nd time just booted back to warning screen, uh oh.
3rd time fastboot, flash twrp, booted back to warning screen.
4th time fastboot, twrp, booted into OS like nothing ever happened.
Held my breath, downloaded the correct kernel update, recovery, flashed, rebooted and I am good to go.
Thanks everyone for your help!

Sorry for the dual post, I am in BOTARD mode apparently. Didn't see the post and thought I forgot to send......missed page 1 of 2!

PattayaGlock said:
Guess the a/b partition maybe?
Click to expand...
Click to collapse
That would be my guess. It should just switch to the functional slot if the other isn't (properly) booting but I've experienced this system to behave quite erratically. I presume these are childhood diseases of a relatively new Android partitioning system.
Back in the 'old' system all you should've done was boot to recovery (which couldn't be corrupted by the OS!) and dirty flash either a working kernel or the original (stock) ROM that includes the kernel.
Anyway, glad you retained all your data! Thanks for updating the title and OP with a solved tag

PattayaGlock said:
<SOLVED>
I am still pretty new to Android and modding so be gentle..............
Should have know better. Flashed the latest Omega Kernel on my 6T while watching the kiddos practice for an upcoming belt test. I know I don't mulit task!
Flashed the Android 10 version on my Android 9 phone. Realized what I did when it would go past the bootloader unlocked warning. Eventually it went to the qualcomm dump mode then rebooted.
Now I can't get it to do anything. It is stuck on that screen. Power button does nothing. My theory is if I can get into recovery I can just flash the correct previous version of Omega that is on the phone.....but without a working power button I am stuck. Computer does not even see the phone when I plug it in.
What now?
Many thanks in advance.
Click to expand...
Click to collapse
hello
I have the same problem with my phone, I have read all your comments about how to fix it, but I didn't understand how you fixed it, only holding the 3 bottons? and waiting to get into recovery or what?
tnx

My phone is sony xperia z1. I rooted this phone. and flashed wrong kernel after that the phone was not responding. Even though I pressed the power button, nothing appeared on the screen, please help me

Zte blade a7 2019 not getting into recovery mode

Hello i am trying to root my 1year old heavy used phone . I am Stuck at the very first step.
Also it should be mentioned that it got a little bit wet by rain someday and then the volume down button was stuck (not mechanicly) it forced the volume setting to zero and had no sound.
I soft reset it . Than no change. had a hard time getting into recovery but i finally got there somehow i dont remember how.
Then hard reset it.No change....
After one day the volume key fixed itself and everything is working fine.
now after one month i was curious if i could root it. But i am not able to get into bootloader state.
I tried everything.
Debug options and oem bootloader unlock switch enabled, usb debugging enabled.
Usb adb says no permission (serial n visible)
Entering Recovery mode at power off state by
Pressing vol up and power button gets normal boot everytime but much faster logo visible at about 3sec.
pressing power + vol down = it takes 25sec
Booting normal .. and the same happens when pressing both vol keys.
I am releasing the keys at zte logo visible everytime
Something was strange : one time when i was trying something it bootlooped 3 times and then it was safe mode.
could there something in the volume button be broken? but the button work fine. I dont know.
Thanks for reading

update:
ok the permissions was a linux issue(start the adb-daemon with su), i can use adb now on this phone,
i can boot it in recovery now, but cant boot into bootloader
adb reboot bootloader leads to normal boot
in recovery, the reboot into bootloader option also normal boot