Database Users

[Q] Bricked S5 Exynos Variant....

Hi XDA!!
I am experiencing problems on my Samsung Galaxy S5 Exynos variant (SM-G900H).
It has been soft-bricked. I can clearly say so as it can boot into stock recovery and in download mode, but not in stock 4.4.2.....
It has been bricked due to following the steps mentioned in this thread : s health and xposed
Many videos on youtube ask the viewer to flash stock Samsung Firmware from sammobile.com using odin in download mode.
I have a problem even there.... all versions of odin get stuck on initializing......
Tried on all USB ports.... Kies closed..... basically done everything everybody wrote on XDA.
Any new bright ideas would be appreciated....
Thanks in advance!!:good::good:

skb_twiz said:
It has been soft-bricked. I can clearly say so as it can boot into stock recovery and in download mode,
Click to expand...
Click to collapse
You need to do more reading. A lot more.
You clearly haven't tried everything yet. Nor are you are bricked if you can boot into recovery mode. It sounds like you have messed up the system files preventing a normal boot.
Odin is the most common way of recovering. Use Odin 3.09, ensure that you have disabled anti virus, malware amd firewall software and do not have intensive programs running in the background. If necessary use a different computer.
Flash a full stock firmware, ideally the same version as the current firmware on your phone. But in any event, not an older version and matching your current CSC /carrier /baseband. And you ought to make the effort to find the correct PIT file and flash it at the same time. This insures that you don't have any lingering partition corruption. A forum search will explain all about PIT files. And someone probably has a thread with the actual files too.
It will work. In the worst case, you will just need to find a different PC.
.

fffft said:
You need to do more reading. A lot more.
You clearly haven't tried everything yet. Nor are you are bricked if you can boot into recovery mode. It sounds like you have messed up the system files preventing a normal boot.
Odin is the most common way of recovering. Use Odin 3.09, ensure that you have disabled anti virus, malware amd firewall software and do not have intensive programs running in the background. If necessary use a different computer.
Flash a full stock firmware, ideally the same version as the current firmware on your phone. But in any event, not an older version and matching your current CSC /carrier /baseband. And you ought to make the effort to find the correct PIT file and flash it at the same time. This insures that you don't have any lingering partition corruption. A forum search will explain all about PIT files. And someone probably has a thread with the actual files too.
It will work. In the worst case, you will just need to find a different PC.
.
Click to expand...
Click to collapse
You seriously think that I don't mean it when I said that I had tried everything?? All steps you mentioned have been tried before I read your reply... Anyways, going on a different PC helped... apparently Odin is quite moody.... If it decides it is not going to run on a PC, it simply will get stuck on initialization... hence the solution is to find a PC which has run Odin before... It will work on that PC definitely!!! If you can't find one, try running on all PC's in your vicinity (friend's, family etc). There will be one that can run Odin...
And by the way, I clearly said my phone is "soft-bricked"... It means that I can boot only into recovery or download... not android... so my friend, you are quite wrong in saying that my phone isn't bricked...
Sent from my SM-G900H using XDA Free mobile app

skb_twiz said:
You seriously think that I don't mean it when I said that I had tried everything?? All steps you mentioned have been tried before I read your reply... Anyways, going on a different PC helped... apparently Odin is quite moody.... If it decides it is not going to run on a PC, it simply will get stuck on initialization... hence the solution is to find a PC which has run Odin before... It will work on that PC definitely!!! If you can't find one, try running on all PC's in your vicinity (friend's, family etc). There will be one that can run Odin...
And by the way, I clearly said my phone is "soft-bricked"... It means that I can boot only into recovery or download... not android... so my friend, you are quite wrong in saying that my phone isn't bricked...
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
Did you try a data factory reset/clear the caches in recovery and reboot and go one from there?

gee2012 said:
Did you try a data factory reset/clear the caches in recovery and reboot and go one from there?
Click to expand...
Click to collapse
Yes... but to no avail... anyways... like I said above, flash the stock firmware in download mode again using Odin... If Odin gets stuck, try it on a different PC...
I will not recommend anyone to do data factory reset as
(1) It won't do anything that helps you
(2) If you don't reset your phone, you can still retain your apps and settings after flashing the stock firmware again!!
<i>LOL, here I am, posting solutions to my own problem!!</i>

same
skb_twiz said:
Yes... but to no avail... anyways... like I said above, flash the stock firmware in download mode again using Odin... If Odin gets stuck, try it on a different PC...
I will not recommend anyone to do data factory reset as
(1) It won't do anything that helps you
(2) If you don't reset your phone, you can still retain your apps and settings after flashing the stock firmware again!!
<i>LOL, here I am, posting solutions to my own problem!!</i>
Click to expand...
Click to collapse
I am an exynos man, and have fewer options and waiting for better prospects OR 6 months of purchase to pass before tinkering. Anyway I appreciate u posting the solutions you found for your own problem. See you have gained a THANKS point from me.

suchiqaz said:
See you have gained a THANKS point from me.
Click to expand...
Click to collapse
I have thanked you for thanking me...
For everyone else, this thread will remain open forever even though my S5 is back up and running...
This thread is now no longer limited to the Exynos variant... All are welcome...
Any problem regarding unbricking any S5 can be discussed here and I will try my best to help you...
Sent from my Reborn GALAXY S5

can't boot phone

Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Also the phone won't boot at all unless hooked up to a power supply, the battery alone doesn't do anything.

nate39 said:
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Click to expand...
Click to collapse
More info is needed. What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?

StoneyJSG said:
More info is needed. Which GS3 do you have? What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
Right now, it sounds like you might need to use enewman17's ODIN debrick file.
Click to expand...
Click to collapse
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks

Well I finally got into recovery and did a factory reset, now it boots into the AT&T white splash screen before it just turns off. I am also wondering if my battery just died for some reason?

nate39 said:
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Click to expand...
Click to collapse
ODIN 10? Try using ODIN 3.09 and see if that helps. The latest update would be Android 4.4.4 NJ4 firmware. This link should help you, it will give you root with safe strap recovery though: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642

I meant 3.10, I will try the older version. What file should I flash?

nate39 said:
I meant 3.10, I will try the older version. What file should I flash?
Click to expand...
Click to collapse
Check out the link I posted in my last post. It should help you get your phone fixed.

I have been there. I went to the very last option which seems to be what I need unless I am missing something.

Neither odin 3.09 or 3.10 will even flash any file now. it either says invalid md5 or fails when it attempts it.

Well, I finally got it to boot into android but it is flaky at best. It is android 4.3 instead of 4.4 where it was initially. The wifi still doesn't work and now the keyboard keeps crashing everytime I do something. The build is jss15j1337ucuemk2 which I know is older than I had before. Does this give anyone a better idea of what I need to do? If I can get a stable flash then can I flash a modem file to fix the wifi? I really need some direction, thanks
Turns out the battery was completely drained which was causing some of the boot problems, I don't now how that happened but I am charging it now.

Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks

nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
If I were in your shoes I'd flash the nb1 tar file in Odin, any vein should work. See this for the tar file http://forum.xda-developers.com/showthread.php?p=56453100. You can then ota to the latest firmware which is 4.4.4, nj4
Sent from my Nexus 9 using XDA Free mobile app

thanks, and as far as you know this doesn't mess wifi up?

nate39 said:
thanks, and as far as you know this doesn't mess wife up?
Click to expand...
Click to collapse
I assume you ment WiFi and not wife? Can't help you with the wife but Wi-Fi should work fine
Sent from my Nexus 9 using XDA Free mobile app

nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems

Muthumbi said:
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Click to expand...
Click to collapse
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I agree. But google has basically all he needs. More so rapidgator

I haven't found anything from Samsung to download. If I flash a newer build, do I also need to flash a modem file and a bootloader or can I just flash the PDA? thanks for explaining this to me.
And can I do a dirty flash so I don't have to lose everything again?

well, now I see that there is no sound. so I guess I will have to flash again.

nate39 said:
well, now I see that there is no sound. so I guess I will have to flash again.
Click to expand...
Click to collapse
There's. Something I'm yet to understand. Did you finally manage to boot into recovery? If so, flash a custom recovery (I recommend philz touch recovery) then use it to make complete wipe.
Then boot into download mode and flash latest pda firmware in the compressed file you downloaded. Ps: make sure it's from your region.
May be if you provided me with your region I'd get you all the files required

Need help on unfamiliar error screen. Image provided.

Just got the Note3 from a online seller who seems to be legit but when the phone was received via the mail, it didn't work as expected.
I've had some experience with android ROMs and rooting but those are mostly for the other phones, this is the first Samsung phone i got. Could you guys help and advise what to do to resolve this error?
I've actually downloaded Kies3 and use the emergency recover thing, but most of the times it couldn't detect the phone connection.
And on the rare occasion that it does detect something, it says that the model is incompatible with Kies3. Tried it with the old Kies too, but didn't work as well!
UPDATE <21_03_2015><16_54_09_524>____________________________________________________________
I just tried flashing lollipop from http://forum.xda-developers.com/galaxy-note-3/general/finally-official-5-0-firmware-galaxy-t3029557
It didn't work, with and without the PIT file.
Before flashing
first_flash_no_pit
first_boot_after_first_flash
Second_flash_no_pit
3rd_flash_with_pit

I think that this error appears when a ROM isn't flashed properly to the device. So a possible solution might be a factory reset in recovery and a clean ROM flash with Odin. You just need to download a ROM for your device model - SM-N9005 from sammobile or samsung-updates.

3XTR3M1ST said:
Just got the Note3 from a online seller who seems to be legit but when the phone was received via the mail, it didn't work as expected.
I've had some experience with android ROMs and rooting but those are mostly for the other phones, this is the first Samsung phone i got. Could you guys help and advise what to do to resolve this error?
I've actually downloaded Kies3 and use the emergency recover thing, but most of the times it couldn't detect the phone connection.
And on the rare occasion that it does detect something, it says that the model is incompatible with Kies3. Tried it with the old Kies too, but didn't work as well!
Click to expand...
Click to collapse
Download an official firmware from sammobile and use odin to flash. It's all on their site
Sent from my SM-N9005 using XDA Free mobile app

Is Odin a entirely different piece of software to kies?
Also would you this to be soft brick and reason to demand for compensation from the seller?

intervall said:
I think that this error appears when a ROM isn't flashed properly to the device. So a possible solution might be a factory reset in recovery and a clean ROM flash with Odin. You just need to download a ROM for your device model - SM-N9005 from sammobile or samsung-updates.
Click to expand...
Click to collapse
Yes this appears when a rom isn't flashed properly, Or the user has manually soft bricked the device.
st3chn0 said:
Download an official firmware from sammobile and use odin to flash. It's all on their site
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
I wouldn't take this advice as you bought a phone that is soft bricked with knox tripped (0x1)
try and return it before you attempt to fix it.
3XTR3M1ST said:
Just got the Note3 from a online seller who seems to be legit but when the phone was received via the mail, it didn't work as expected.
I've had some experience with android ROMs and rooting but those are mostly for the other phones, this is the first Samsung phone i got. Could you guys help and advise what to do to resolve this error?
I've actually downloaded Kies3 and use the emergency recover thing, but most of the times it couldn't detect the phone connection.
And on the rare occasion that it does detect something, it says that the model is incompatible with Kies3. Tried it with the old Kies too, but didn't work as well!
Click to expand...
Click to collapse
3XTR3M1ST said:
Is Odin a entirely different piece of software to kies?
Also would you this to be soft brick and reason to demand for compensation from the seller?
Click to expand...
Click to collapse
It looks like your knox is 0x1 and the system status is 'custom' but i can't really tell as the quality of the pictures isn't good enough.
This means that the phone has been used before and rooted, then a wrong flash or simply just deleting a few system files so it doesn't boot to get that screen to show up instead.
If there is nothing wrong with the hardware, Odin should fix this easily.. but i wouldn't trust it as your imei could of been changed.. many things could of been tampered with.
Also you mention that kies doesn't detect the phone properly, only sometimes. This could be your pc but it is likely a hardware problem with the phone judging by how you recieved it with knox tripped (0x1).
As it has been sold in this condition i can only assume that it has been tampered with. Why else would the seller sell a soft bricked device ?
Was it advertised as new or used?
Return it and get your money back as soon as possible is all i can suggest, good luck.

1. If its possible for him to return to the seller then yes but he can't to samsung. Due to knox being tripped. If he does its just basically a 50/50 chance
2. This nothing to do with soft brick. Such thing as a soft brick doesn't really exist.
3. Using odin to flash any official firmware. Is not bad advice.
Sent from my SM-N9005 using XDA Free mobile app

celderic said:
Yes this appears when a rom isn't flashed properly, Or the user has manually soft bricked the device.
I wouldn't take this advice as you bought a phone that is soft bricked with knox tripped (0x1)
try and return it before you attempt to fix it.
It looks like your knox is 0x1 and the system status is 'custom' but i can't really tell as the quality of the pictures isn't good enough.
This means that the phone has been used before and rooted, then a wrong flash or simply just deleting a few system files so it doesn't boot to get that screen to show up instead.
If there is nothing wrong with the hardware, Odin should fix this easily.. but i wouldn't trust it as your imei could of been changed.. many things could of been tampered with.
Also you mention that kies doesn't detect the phone properly, only sometimes. This could be your pc but it is likely a hardware problem with the phone judging by how you recieved it with knox tripped (0x1).
As it has been sold in this condition i can only assume that it has been tampered with. Why else would the seller sell a soft bricked device ?
Was it advertised as new or used?
Return it and get your money back as soon as possible is all i can suggest, good luck.
Click to expand...
Click to collapse
The seller is not responding to my questions, so I think the next best bet to attempt and fix it myself. Am I right to think that flashing an official firmware is the best option? What could go wrong if the imei have been changed?
Also, you just got me curious about the knox thing. Where do you suggest I look at for a comprehensive elaboration of the error codes?
http://postimg.org/image/rorg1p21n/

Flashing firmwate from sammobile will not trigger knox so as suggested earlier download and flash a firmware for your phone

st3chn0 said:
2. This nothing to do with soft brick. Such thing as a soft brick doesn't really exist.
Click to expand...
Click to collapse
This is a softbrick, if the hardware is fine then you should be able to fix it in 10mins by flashing a stock rom, but as the seller has sold it in this state then i assume it is softbricked for a reason so you can't test the device for example.
cryostasis25 said:
Flashing firmwate from sammobile will not trigger knox so as suggested earlier download and flash a firmware for your phone
Click to expand...
Click to collapse
But his knox is already tripped.. he bought a phone with knox 0x1 that's why i suggested returning it.
3XTR3M1ST said:
The seller is not responding to my questions, so I think the next best bet to attempt and fix it myself. Am I right to think that flashing an official firmware is the best option? What could go wrong if the imei have been changed?
Also, you just got me curious about the knox thing. Where do you suggest I look at for a comprehensive elaboration of the error codes?
http://postimg.org/image/rorg1p21n/
Click to expand...
Click to collapse
If the seller is not responding, then it points to them tampering with the device before selling it. Where did you buy it from, i would ring your bank as soon as possible.
Download the latest n9005 rom from sammobile and flash it through odin if you want to try and fix it, shouldn't really matter what csc as your knox is already tripped anyway so you can't recieve OTA updates or warranty from samsung anymore, mine is a BTU device but i have used many XEO roms.
If the phone isn't connecting to the computer properly like you say, then it's probably best to leave it. As this could result in the connection failing when it is flashing the bootloader or something. But if it works fine, then there should be no problems.
Here is something you could try, start up odin (i use v3.09), close all processes relating to kies, boot the device into download mode, that screen you provided pictures of. Plug the phone in and wait a few minutes to check the connection is stable, move the cable around to make sure the socket and cable are okay. You will see it come up on the top left in odin after windows has installed the drivers.
If this all works fine then flashing a stock rom should fix the device if the hardware is okay.

Just a quick question. From what site did you buy the phone and how did you pay for the phone?
Sent from my SM-N9005 using XDA Free mobile app

Where is a reliable source to download the official firmwares? I cant find it on the samsung site.
Tried http://www.samsungupdate.com/how-to/download-firmware but the file sizes are different on either filehost mirrors and it seems shady.

www.sammobile.com/firmwares/

I just tried flashing lollipop from http://forum.xda-developers.com/galaxy-note-3/general/finally-official-5-0-firmware-galaxy-t3029557
It didn't work, with and without the PIT file.
Before flashing
first_flash_no_pit
first_boot_after_first_flash
Second_flash_no_pit
3rd_flash_with_pit

3XTR3M1ST said:
I just tried flashing lollipop from http://forum.xda-developers.com/galaxy-note-3/general/finally-official-5-0-firmware-galaxy-t3029557
It didn't work, with and without the PIT file.
Click to expand...
Click to collapse
1. Try flashing the new bootloader and modem first: http://forum.xda-developers.com/galaxy-note-3/general/odin-flashable-lollipop-bootloader-t3058101
2. If flashing modem and bootloader succeeded, try flashing the whole firmware again.
From what I learned from this http://forum.xda-developers.com/showthread.php?p=47287747#post47287747 thread, "invalid ext4 image" errors occur when bootloader is wrong.
Actually, do you have any info with what firmware was this phone last? I think I might have encountered another thread (don't remember it, though) which says that these exact problems occur when trying to upgrade from Jelly Bean 4.3 to Lollipop directly.

sirobelec said:
1. Try flashing the new bootloader and modem first: http://forum.xda-developers.com/galaxy-note-3/general/odin-flashable-lollipop-bootloader-t3058101
2. If flashing modem and bootloader succeeded, try flashing the whole firmware again.
From what I learned from this http://forum.xda-developers.com/showthread.php?p=47287747#post47287747 thread, "invalid ext4 image" errors occur when bootloader is wrong.
Actually, do you have any info with what firmware was this phone last? I think I might have encountered another thread (don't remember it, though) which says that these exact problems occur when trying to upgrade from Jelly Bean 4.3 to Lollipop directly.
Click to expand...
Click to collapse
Thanks for the suggestion. I'll give it a try after a little more research.
I have no idea what the phone was before, or what the seller did to it since he's just not responding anymore.

So I tried flashing the new bootloader as suggested, it seem to have worked to some extent, but then I screw it up again by pulling out the cable before seeing "PASS!". What now?
http://forum.xda-developers.com/showpost.php?p=59616074&postcount=16 said:
iketil said:
Hi the file size should be 58 041 KB
From what I can see from you ODIN log, ODIN has "done its thing"
If you did not uncheck the auto reboot tab, the phone should now be rebooting.
And bootloader and Modem should be updated when its booted up.
Are you still stuck at the "Samsung GALAXY Note3 SM-9005" screen ?
Click to expand...
Click to collapse
I'm still stuck on the "Samsung GALAXY Note3 SM-9005" screen. However I do think that the "hlte_lollipop_bootloader_modem.tar.md5" has "done its thing". I was previously unable to get to the recovery, but I was able to get to this <3e>recovery after flashing.
Also managed to see some logs of "i'm not sure what it is" before the phone went blank. I presume its due to battery going flat.
Later, I tried putting TWRP on it. Starting with "twrp-2.8.3.0-hlte-4.3.img.tar". But being a novice odin user I mistakenly unpluged the phone when odin is showing "RESET!". Then I tried going into recovery using VOLUP+HOME+POWER, and got this screen instead. I'm not sure if removing the phone before "PASS!" in odin could have caused this? Subsequently I tried flashing "twrp-2.7.0.3-hlte-4.3.img.tar" and
"twrp-2.7.2.0-hlte-4.3.img.tar", which resulted in the same error screen about SEANDROID.
I also noticed it increased my KNOX counter?
This is before and after.
Next I tried flashing ""hlte_lollipop_bootloader_modem.tar.md5" again hoping it would fix it. It didnt work. Silly me, this flash does not have a recovery image in it does it?
Anyway, now I dont have a working recover and is still stuck on the "Samsung GALAXY Note3 SM-9005". Thankfully odin mode still work. What should I do next? Please see this thread below for a little background to my problem. Thank you.
http://forum.xda-developers.com/galaxy-note-3/general/help-unfamiliar-error-screen-image-t3059227
Click to expand...
Click to collapse

HORRY SHET!!
I think my phone is asian! I just flashed the latest taiwan firmware released (N9005ZSUGOC3_N9005OZSGOC3_BRI) after flashing the new bootloader and everything works now!
I'm not sure what actually made it work since this is the first taiwan firmware I tried (its all XEO and BOB previously), but big thanks to everyone who helped!

kind of bricked my phone! need help!!

So i wanted to root my phone, following a tutorial on androidsoul(i cant post link yet i just googled edge plus root)
after like 20 tries to flash with odin it finally passes(dunno why. nothing changed the last 5 tries... and odin tooks about 1h for the flash..)
finally their i decided to add some lines in the build.prop to tweak the ram management -.-
so heres where the **** begins. The device bootlooped, so i downloaded the firmware for my device nummer with the vodafone branding and tried to flash it.
it fails and the phone gets some kind of bricket i get a message i need to emergency firmware recovery with some kind of samsung crap software, which doesnt support my device(neither kies 3).
good thing i can still enter the download mode but when i try to flash, odin stucks at setupconnection or iniialazion or get pit mapping or sboot.bin or cm.bin in this momen at boot.img .. just somewhere everytime.
I already deleted kies and tried all my ports.
any ideas??
ty alot!

Look for a 3 Part Firmware with a PIT File.
Sent from my SM-G928F using XDA Free mobile app

put phone in download mode, connect to Kies even though says not compatible and goto Emergency Firmware upgrade in the menu it will flash anyway even though not compatible

didnt found anyone only for the normal edge. mby its to early...
Shockwave71 said:
Look for a 3 Part Firmware with a PIT File.
Sent from my SM-G928F using XDA Free mobile app
Click to expand...
Click to collapse
didnt found anyone only for the normal edge. mby its to early...

bunglebp said:
put phone in download mode, connect to Kies even though says not compatible and goto Emergency Firmware upgrade in the menu it will flash anyway even though not compatible
Click to expand...
Click to collapse
but i have to choose a device then and because the device is not supported its not listed...

bunglebp said:
goto Emergency Firmware upgrade in the menu it will flash anyway even though not compatible
Click to expand...
Click to collapse
That should work though failing that you may have to get it to a dealer to look into.
if not insurance,,,, 3 seconds in a microwave,,,, claim,,,, done
Disclaimer: I do not condone putting phones in microwaves unless its totally awesome

when i try to just flash a new firmware with keis or smart swtich the installation just stays at 0% forever...
i have no ideas anymore what to do..

figlero said:
when i try to just flash a new firmware with keis or smart swtich the installation just stays at 0% forever...
i have no ideas anymore what to do..
Click to expand...
Click to collapse
How old is it? - repair/replacement is looking likely
Have you tried KEIS on another machine?
has the machine been rebooted yet? (old trick)

ha3kser said:
How old is it? - repair/replacement is looking likely
Have you tried KEIS on another machine?
has the machine been rebooted yet? (old trick)
Click to expand...
Click to collapse
the phone is 1 week old and got no guarantee cuz i triggered know when i rooted-.-
yes i tried kies on my laptop too...
of course... ^^

figlero said:
the phone is 1 week old and got no guarantee cuz i triggered know when i rooted-.-
yes i tried kies on my laptop too...
of course... ^^
Click to expand...
Click to collapse
I would be tempted to take it back to where you got it and ask them to replace it... its up to you if you say it was because you were trying to root it or not...
If it t'were me I would blame an Update or App Corruption - though I am a gifted linguist (read: Bull****ter) and can normally get things sorted, your average shop employee wont know enough about rooting (hopefully) or KNOX (hopefully) so they will just replace it.
But thats not a Guarantee (as with all changes you make its your device and your responsibility if it goes wrong, warranty void etc etc etc)
I'm hopeful you are able to get this sorted and keep us posted if its replaced etc

Need help flashing stock firmware.

Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3

tutchthesky7 said:
Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3
Click to expand...
Click to collapse
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode

Scorpionea said:
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode
Click to expand...
Click to collapse
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else

tutchthesky7 said:
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else
Click to expand...
Click to collapse
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect

Scorpionea said:
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect
Click to expand...
Click to collapse
Yes to all that, I think I have the issue of finding the correct firmware now though, I was able to flash a couple things to it, but nothing seems to get me back from factory binary