Database Users

How can I change SELinux from Enforcing to Permissive on Samsung Galaxy Note 3

Hi to all
I want to found a simple solution(other a kernel) to change SELinux from Enforcing to Permissive on Samsung Galaxy Note SM-N9005 on MJ7 firmware.
Because I want to install LBE SECURITY and it don't work with statu Enforcing.
Thanks for all way Friends

Why not change kernel?
Sent from my SM-N9005 using xda app-developers app

Kernel was not stable and make some error with last firmware(camera ,spen ...)

as things look right now a custom kernel is the only way to get selinux = permissive.
But if you looking for privacy stuff use xposed with xprivacy module.
Beats LBE and all the other crap

Thanks for idea xprivacy module Zroice but Not a modification with edit the build existing ?
Envoyé de mon SM-N9005 en utilisant Tapatalk

On S4 Mini I9195 now whit Knox and stock kernel...
To turn SELinux from Enforcing to Permissive I make this on Terminal Emulator:
su
pm disable com.sec.knox.seandroid
-- wait for killed...
setenforce 0
But here on Note 3 not work.
Can someone study this way on N9005?
Thanks

Fast click 3-4x on "SELinux Status" in "About Tablet" (or "About Phone") should work too to switch between permissive and enforceing.

Lol not.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app

Wanam xposed can change it, it worked for me, stock mk2 stock kernel
Sent from my SM-N900 using xda app-developers app

*GalaxyDev* said:
Wanam xposed can change it, it worked for me, stock mk2 stock kernel
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
I did wonder if Wanam done it as it was deemed "Experimental" -- interesting to know it works though.. I keep mine enforced on custom kernel, no real need for me to have Permissive atm.

SELinux enforcing mode Galaxy S5
I have Galaxy S5 SM-G900F, the problem is I cant use Chainfire Stickmount or Paragon exFAT, NTFS, HFS+. These are the only SU apps that I want to use but will not work without SELinux being set to permissive mode. I have sent the logs for Paragon to the developers in the hope they can make some changes to bypass the MAC my SELinux is imposing.
When I installed ChainFireAutoRoot and ran SuperSU it warned about KNOX and disabled KNOX. KNOX counter at 0x1 after root.
I have tried adb shell su 0 -c "setenforce 0"
rebooted
still enforcing mode
Can someone explain to me, is it actually the boot loader setting SElinux mode?

I have this problem also

One possible way is downloading wanam xposed.
Then go to security hacks
then change selinux from enforcing to permissive
good luck!:fingers-crossed:

Thanks. But that did not work.

boogieb4 said:
Thanks. But that did not work.
Click to expand...
Click to collapse
flash lean kernel, any civz kernel, xnote kernel ...
selinux is set by the kernel

Is it possible to flash any rooms while status is enforcing.

boogieb4 said:
Is it possible to flash any rooms while status is enforcing.
Click to expand...
Click to collapse
Try the Ultimate Kernel v64.. it fix many problems i had with lean kernel and permissive forced on wanamite.
Chooo

boogieb4 said:
Is it possible to flash any rooms while status is enforcing.
Click to expand...
Click to collapse
My experience with Note 3 (SM-N9005) is that any rom can be flashed while selinux status is enforcing
Sent from my SM-N9005 using XDA Free mobile app

How to change enforcing to permissive in My SM-G532F

Bhadran said:
How to change enforcing to permissive in My SM-G532F
Click to expand...
Click to collapse
This is not your phones forum its NOTE 3 forum.

I want cf-root for my note 3

I want cf-root for my n900xxueboe3 5.0 lollipop india version. Please help me.

koolduderohit4u said:
I want cf-root for my n900xxueboe3 5.0 lollipop india version. Please help me.
Click to expand...
Click to collapse
HERE.

thanks but....
thanks but most of the apps like xmodgame & xassistance show that my device is not rooted. even i am not able to install omega rom with it..

Check ROOT access?
koolduderohit4u said:
thanks but most of the apps like xmodgame & xassistance show that my device is not rooted. even i am not able to install omega rom with it..
Click to expand...
Click to collapse
did you check whether its properly Rooted using SU or Root checker?
Also not all Kitkat compatible Xposed modules are working with Lollipop (esp in Touchwiz)
And what recovery have you installed to flash ROM?

i checked it with root checker app get it through play store... it shows my device is rooted but still i am not able to install omega rom. i rood my mobile with ( CF-Auto-Root-ha3g-ha3gxx-smn900) with odin BASEBAND N900DDUEBOB1. & STILL IT SHOWS STOCK RECOVERY MODE.

You need to flash recovery separately.
If you read instructions in CF Auto Root, they'd have mentioned as Outcomes as (Root + Stock Recovery)
Flash TWRP or Philz after that
Sent from my SM-N9005 using Tapatalk

Viper4Android on Marshmallow 6.0.1 N910C ?

Hi,
does anyone know how to install viper4android into SM-N910C 6.0.1 Stock *properly*?
I have root, busybox, ViPER4Android-supolicy zip installed and it starts ok but after a song or two it goes back to Processing: NO.

Hi,
Try with a custom kernel. A permissive one. I know it might be a painful but it's a way that works.
Good luck.
Sent from my Note 4 using XDA Labs

0-W4lly said:
Hi,
Try with a custom kernel. A permissive one. I know it might be a painful but it's a way that works.
Click to expand...
Click to collapse
Thanks, but the ViPER4Android-supolicy zip took care of selinux
Also, if anyone's interested I've finally managed to make it work permanently. You need to remove the deep buffer stuff from audio_policy.conf (placed at system/etc) with a root explorer, AND remove/uninstall/disable SoundAlive in system apps.

Could use some help guys. Trying to get viper/ARISE running on a note edge (sprint). I've done everything to meet every prereq. I have root. I have busybox. I have permissive SELinux. I've done all the build.prop and audio_policy.conf edits. I've flashed a billion different zips. Nothing's working. Viper says the driver is installed and processing correctly, but none of the sound coming out of the speakers or headphones is actually viper-processed sound. I'm on Marshmallow (6.0.1) and running Emotion Kernel. Any help is appreciated. Thanks

Xposed framework for 6.0.1

Just wondering when it will be release for S6 Edge+ 6.0.1 ?

Wanam's xposed framework made for Samsung phones works perfectly for me on Pure Stock Extralite rom and Audax rom.
https://www.androidfilehost.com/?fid=24591020540824278
It takes about 5 mins to boot after flashing it in recovery so be patient. You'll know it's working when it comes up with a screen saying "updating apps" this can take a while too depending on how many apps you have on your phone.

kdogguk said:
Wanam's xposed framework made for Samsung phones works perfectly for me on Pure Stock Extralite rom and Audax rom.
It takes about 5 mins to boot after flashing it in recovery so be patient. You'll know it's working when it comes up with a screen saying "updating apps" this can take a while too depending on how many apps you have on your phone.
Click to expand...
Click to collapse
im using samsung galaxy s6 edge+ on 6.0.1 sm-g928w8 my device is rooted from the xda dev one click root how would i go about installing this? and will it work?

DJWhoa said:
im using samsung galaxy s6 edge+ on 6.0.1 sm-g928w8 my device is rooted from the xda dev one click root how would i go about installing this? and will it work?
Click to expand...
Click to collapse
here is link xposed of wanam
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
How to install:
- Install this Xposed Installer App version
- Make a nandroid backup
- Copy the Xposed file and the uninstaller to your sdcard
- Flash "xposed-vxx.x-sdkxx-tw-armxx-custom-build-by-wanam-xxxxxxxx.zip" through a custom recovery (TWRP/CWM...)
- Reboot and Waiiiiiiiiit, it may take several minutes to boot up depending on your Rom size.
here is xposed zip link
https://www.androidfilehost.com/?w=files&flid=37508
good luck
if you have some question ,just pm me

Bypass Safety Net root check (for Pokemon) on Lollipop?

Hello. I am running Alliance ROM, with an OH4 build and an OD5 bootloader. My phone has been rooted forever, and I can't remember which root method I used, but I know that I can ODIN an NI2 kernel and get to Safestrap. I've never gotten Xposed to work properly.
There are a lot of threads about using Magisk, but everything talks about it needing some sort of "Systemless root". I'm not sure what that means. Is that some newfangled root method that everyone is using now? I have SuperSU pro 2.78. How do I know if it's Systemless?
Can anyone decipher the Magisk thread and tell me if it will work with this phone? Or are there any other methods that will work?
Sent from my SM-G900V using XDA-Developers mobile app

i dont know if it will work with pokemon go or not but here is a way to hide root you would have to downgrade to super su 2.77 or earlier though to use this http://forum.xda-developers.com/apps/supersu/suhide-t3450396

Magisk works if you have an unlocked bootloader. I am using it on my s5 with Pokémon. It's fairly straightforward with twrp to setup. I am on resurrection remix.
Sent from my SM-G900V using Tapatalk

Hopeful
xmoox said:
Magisk works if you have an unlocked bootloader. I am using it on my s5 with Pokémon. It's fairly straightforward with twrp to setup. I am on resurrection remix.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Can you tell us in some detail how you installed it and what version your using of Magisk. I've not been as lucky with my installs and yes I can unlock my bootloader

unitop4 said:
Can you tell us in some detail how you installed it and what version your using of Magisk. I've not been as lucky with my installs and yes I can unlock my bootloader
Click to expand...
Click to collapse
Sorry for the delay. It looks like Magisk no longer works as google updated safetynet. If I find something that works I will let you know. I am probably done with the game though.
https://www.reddit.com/r/pokemongod...kemon_go_magisk_workaround_no_longer_working/
I updated to V7 and no luck. Here is the link to instructions.
http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

xmoox said:
Magisk works if you have an unlocked bootloader. I am using it on my s5 with Pokémon. It's fairly straightforward with twrp to setup. I am on resurrection remix.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Maybe I am not erasing all the su files, but even with magisk installed, regardless of being on a stock rom or a custom rom, i can't get it to work.
I assumed that magisk working means that magisk is working properly and...should, in theory, allow me to play pokemon go.
I guess I'll just have to hope they repeal it, mostly because iphone has so many hacks....not requiring jailbreak.
fking joke

Su hide by chainfire works with newest pokemon go update from what I've heard
Sent from my SM-G900V using Tapatalk

[email protected] said:
Su hide by chainfire works with newest pokemon go update from what I've heard
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
but not with phh superuser? that's what i've been using since that seems to be what magisk has been pushing.
edit: also, does it work with xposed as well? at least, the systemless exposed.
actually, i don't even know if the zip i have to use for my samsung is systemless, even though it uses the same installer...

Apparently no magisk doesn't work with newest pokemon go update
Sent from my SM-G900V using Tapatalk

http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268Magisk v.7 +Suhide v0.54 + Xposed confirmed working POGO on my S3 running CM13
My S5 has locked bootloader =(
Magisk requires unlocked bootloader +TWRP
Suhide requires android 6.0+
If you can get TWRP on your S5 you are good to go to play POGO
1.Uninstall xposed and Majisk and Supersu(i used http://forum.xda-developers.com/attachment.php?attachmentid=3528363&d=1446472307
2.Reflash whatever rom you are on(if using rooted rom(like cm13) reflash unsu.zip and delete the SU binaries or anything that says "su" from /system/bin & /system/xbin & /data with TWRP file browser)
3.TWRP shell, type
echo SYSTEMLESS=true > /data/.supersu
4.Flash SuperSU. only this version http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
5.Reboot to system once before going back to recovery.
6.Flash Magisk v7, then suhide v.54, then Xposed Systemless). Reboot to system.(do not flash batch)(flash each individually)
7.Install Magisk Manager v2.apk
8.Install Material Design Xposed Installer apk
9. i like the "Snorlax" xposed mod
=)
*also earlier today Magisk v6 + Suhide v.54 +xposed was working fine but i went ahead and updated to new verrsions to hopefully stay ahead of safety net
*also here is oudated thread where i learned this method...my steps slightly different and use updated links
*also some report problem with xposed systemless v86.6 ... redo all steps with v86.2
*also xposed not required for POGO (just ignore all xposed entries in setup for working POGO and root) but who doesnt want xposed =P

What would work for my stock rom on a Samsung E7 Lollipop 5.1.1? I rooted, installed GoGPS in system with Lucky Patcher, unrooted and now the game says my phone is not compatible with Pogo. I can't install Marshmallow cause there is no version of it for my smartphone.

Nanda51 said:
What would work for my stock rom on a Samsung E7 Lollipop 5.1.1? I rooted, installed GoGPS in system with Lucky Patcher, unrooted and now the game says my phone is not compatible with Pogo. I can't install Marshmallow cause there is no version of it for my smartphone.
Click to expand...
Click to collapse
Wrong forum and warez talk. No help for you!

Nanda51 said:
What would work for my stock rom on a Samsung E7 Lollipop 5.1.1? I rooted, installed GoGPS in system with Lucky Patcher, unrooted and now the game says my phone is not compatible with Pogo. I can't install Marshmallow cause there is no version of it for my smartphone.
Click to expand...
Click to collapse
Use a system app mover instead