Has anyone else seen a V20 totally die when a picture is snapped? The only to get the phone back on is plug it into the wall a standard battery pull doesnt even work, it's the strangest thing. Video works fine.
i have met the same problem. No idea how it happends but i if i turn flash off, it never happend. BTW i'm using US996_10g software version.
Are you running on a stock battery or aftermarket?
Related
I have a 8125 and I was able to unlock it fine. After unlocking it I upgraded to the underground crossbow edition rom - which the 8125 rebooted and was running. I tried out a couple things and everything seemed to be running/working fine. It was getting late so I put it down and went to bed. This morning when I got up the phone was off so I went to turn it on and nothing happened. I figured it just ran out of battery power plugged in the charger and guess what no red light on. I have tried everything under the sun but I cant get it to charge or startup. Anyone have any ideas? It was working fine.
i know u said u've tried everything and i don't mean to sound like i'm takin the buscuit, but leave it on charge for n hour, then try bootloader. taking the battery out completely for a while could work.
i had so many problems with crossbow! think this was one of them.
Unplugged
Well so far I left the charger plugged into the phone with the battery in it for over an hour now - with no luck. The red charging light doesn't even come on. Did you have that problem? I also left the battery out and plugged in - still nothing. Tried taking the battery out and then putting it back in while plugged in - no go.
I have not tried the "bootloader" - but the phone will not turn on at all or respond in anyway. Its in a powered down state (or so it seems) - I dont think bootloader will work?? But I dont know anything about bootloader - is it on the ftp site and how do I use it?
Any chance the battery could have been completely discharged?..just a thought. I think i read that completely flat batteries wont charge up via usb. Disregard if thats a silly suggestion, just thought id offer my two cents.
try getting a new battery and see if it boots up...it can be your battery.and you are trying to charge with an AC adapter right?
Wall Charger
I am charing it via the wall charger (not usb) and I am going to try to get another battery. Just weird that I never had a battery problem until I install the wm6??!! Unless the damn thing drained my battery dry and somehow damaged the battery. I called Cingular and they are sending me another unit as its still in warranty. So we'll see when I get it - I will try the new battery. Strange. Very Strange - because everything was working last night.
Strange
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Could be a bad battery. You need to test out with some one else battery
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
u shud have plugged it in while it was booting...did u?
New Battery
Well I finally got the new battery I ordered today. When I put it into my phone it will boot into wm6 fine but will not sync with activesync 4.0 or charge via USB or plugged into the wall. I uninstalled activesync, rebooted my computer and installed Activesync 4.5 - but still no luck with the phone via usb syncing with my pc. Also when the phone in plugged into the wall via the wall charger it does not charge. I am beginning to think the port on the bottom somehow was disabled from the rom update, although I dont see any posts with people having that problem. I guess my next option is trying to reflash it to stock rom via a sd card since it wont connect via USB - however I can not find the information step by step how to do this. Can someone point me in the right direction?
Try going to the bootloader screen: Turn off your phone and then hold the camera button while you turn it on. When you are at the Rainbow screen (thats the bootloader) plug in your USB cord. You should see in the bottom left (above the left soft key) where it says USB. If it doesn't then I'd say your USB port is broken (I'm not aware of any ROM being able to disable that).
As for flashing from the SD card, I believe thats documented in the Wiki...
I've been working on my friends 8125. First the original battery died and he couldn't charge it with the phone, so I performed the "jump start" trick with the 9v battery. That resolved the issue, but then he let it die again, and he jump start trick didn't work. SO the diagnosis was to replace the battery...
Well now that I have a new battery that works, the phone has somehow gotten stuck in "Charge Mode" and the moment I insert the battery it starts to overheat. This occurs before even turning the phone on. Once turned on the battery indicator shows that it is charging, even though its not plugged in.
I'm wondering if this is due to a hardware problem with the mini-USB port or something.
I searched the forums, but didn't find anything close to this issue so any idea will be much appreciated.
I'd say
that it was the battery. Try another one.
Overheating Issue
Being that it was already tested with a new battery and still didnt work, I would try to go into bootloader and reflash with original att or tmobile rom for the 8125.
I have the same problem, I've already re flashed the original ROM but still have the problem, any suggestions?
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Im guessing you cant run bootloader?
Maybe this is a warrenty jobby
If you know someone with another HD2, Try swapping the battery.
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
does it enter in bootloader mode?
retry flashing wm rom+radio
chrisizzle492 said:
i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
Click to expand...
Click to collapse
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
shufflez said:
Hi Chris,
Please eleborate/clarify your OP, because I don't think anyone gets this... At least i don't! You say the screen doesn't turn on but the phone boots?! How do you figure that? Your device is actually on because you can receive/answer calls!?! :S
Sounds like your device has just BSOD (Black Screen of Death) which is discussed quite a lot here. Just press reset button or pull the battery (please tell me you have tried that before...).
If your device IS NOT powered on, please try this:
Does the device vibrate shortly when pressing the End-button? If so you should leave it connected to the charger for longer. If battery has drained too much it takes a while for the device to allow it to power itself up (prevention of overdrainage, which Lithium-batteries don't like very much).
Do you charge through USB, or with the supplied charger? I've had this before trying to charge it with a (different brand) microUSB charger. Turned out most chargers only give out 500mAh, whilst my normal charger (and car-charger) give out 1000mAh i believe. That might help.
You can order a cheap replacement battery from China (i got mine with dockingstation), which is already charged about 60% (for storage purposes).
BTW if your problem is fixed, please add the prefix [FIXED] or [SOLVED] to your topics title.
Click to expand...
Click to collapse
i have restarted many times.
i use the wall charger.
but why would the phone boot but not turn on the screen or have the mic work?
remove your sd card and the battery. you may have to hit the rest button on the back after you plug the battery back in as well, but as long as you have the sd card out it should come back on. try plugging the phone into a charger and then remove the battery as well sometimes it'll wake it up so to speak. it's just a matter of playing with it. mine did the exact same thing and i freaked out for a little bit.
now if after all this it doesn't work and you've played with it for a while then yeah, best of luck to you =\. but whatever you do in playing with the battery and the charger, keep the sd card out until you can boot into winmo.
EDIT: never mind, i thought the phone wasn't booting. i misunderstood, but i went back and reread the original post. try reflashing your rom if you're in winmo and experiencing those issues. or take the sd card out and reboot.
i would suggest making an backup, as your phone turns on you should be able to estaplish a remote-connection with some (3rd-party-)software and do a hardreset.
if this wont work i would recommend setting it back to factory default (revert hspl if you have one and install stock rom) and send it in for warranty.
seems to be some major problem...
All this steps should be possible without screen turning on (working touchscreen may be needed for backup, but flashing doent need screen input)
if drive-mode is default for your usb connection and holding you from flashing you can do a hardreset and afterwards active sync will be default again and you can establish an active sync connection and flash
check if any of the pins that contact the battery are bended or broken, try to avoid removing the battery when you have to reset your hd2 because the pins are fragile
similar thing happened to me just last night!
I tried the jmz dual boot last night and I was nearly out of battery. I didnt look at any instructions I just installed it and restarted the phone to check out the new toy. it finally got done loading I chose android right away and I was walking towards the bedroom. when I went to see if android had fully booted and plug in the phone I had nothing! It was off. I decided that the battery must have died so I tried to turn it on and all that happened was the tmobile flash screen came up for a second and then it went right off, I got so desperate that I was going to do a hard reset but that wouldnt even work! the boot loader screen would just shut right off. I was suggested to try another battery we had at the house and bang it fired right up I took a wiff of my other battery and I dont know what happened but I think I let the magic smoke out cuz it is fried!
chrisizzle492 said:
ok here is the problem.
4 nights ago i forgot to plug in my hd2 while android was running and the battery died.
the next morning i went to turn it on and the screen no longer turns on but the phone does boot. the battery doesnt charge, status light doesnt either, end key doesnt work, when i answer calls no noise can be heard or made.
any hope?
Click to expand...
Click to collapse
hello friend...i have a problem similar to this. basically when my phone is in android which i use alot if it dies in android, when i reboot it it will turn on for about a second to see my splash screen then turn itself off (the battery is obviously flat). so i plug my charger in and it stays on now but doesnt indicate charging....i boot it into windows mobile and the batt just stays at 0% but its still working. however once i unplug it it will die.....its like the battery is not in the phone. luckily i have two batteries and a dock which charges batteries, so i replaced the battery and everything works fine. once the battery that died in android was fully charged i tried it again and it was fine.................im guesing the moral to this story is dont let your phone die in android mode
I do notice my HD2 runs hotter while in android than while it runs in Windows.
I am not sure if that's an issue to this, which is why I never mentioned about it being hotter. Although my HD2 is noticeable hotter, it never gets to a point that I think I should unplug the USB due to overheating concern...
Just a few inputs from passed experience
I use TMOUS Stock 2.13.531.1 WWE ROM
2.12.50.2_2 radio (not stock)
k going to tmobile today to see if they have any extra batteries i can try.
then ill update
i went to tmobile. and while i was there i noticed the screen was turning on but very dim without backlight (barely noticable). but the rep helping me did not notice and i let it stay that way because tmobile is sending me a new refurbished phone as long as i send the old one (and the rep was totally cool he uses xda also and said they wont check my software and if they do they wont ask for the phone back). he also let me get insurance in case this happens again, instead i will just say its lost. so i basically killed 2 birds with one stone
Hey guys, my herald suddenly started acting weird. It was working fine. Had occasional battery problems (like immense battery drain) but suddenly I took out the battery, reinserted it and it didn't switch on. I kept pressing the switch on button but to no avail. I attached my mobile to the data cable to check if this was a problem with my rom rather than the battery. I accessed the bootloader by soft reset and used romupdateutility to hardspl it. When I switched it back on the "Cannon Yang" sign appeared and the cell phone switched off. Also, when in bootloader, if i took out the charger or the data cable, the cell phone switched off by itself. It was working fine a few hours back though. So I went to purchase a new battery, got a hold of one, it was a bit bigger than Herald's original battery but could fit in. It's running fine, just that the back cover won't fit properly, but one problem, when I charge this battery, it doesn't charge rather the "Main Battery" says Unknown. Same thing happens when I connect it via data cable. Is there any way I can use my old battery again? What might be the problem? The phone barely switches on and when it does, it switches back off after the Cannon yang logo. With the new battery, the phone is working but the battery won't charge or rather would show the main battery as Unknown. I'd be grateful is someone could help me on this. Thanks =)
Buy a new battery. Sounds like it's dead. Just got 1 couple months ago for less than $5.00. Where did the other battery your using come from ? Better make sure it's the same specs as the other.
Never had this happened to me b4. Removing battery wont help either. Tried diff battery and power cable. Its just dead. Soft reseting wont work either
Any ways to fix this myself? Is it the power supply?
I have the same problem, I was downloading the stock firmware on my note 4 while charging, I went to check if it was done downloading but it was frozen, I couldn't get to the lock screen just a black screen with the red notification light, I removed the battery but since then it won't turn on nor charge. I know it's not the battery cuz it works fine on another n4. The weird thing is that I was also downloding the same file on my computer and it was frozen too it didn't finish the download just like my phone,.
This is the first time that something like this happened to me, it wasn't over heating or anything so I have no idea why it won't turn on.