I did a full wipe and loaded stock recovery, ATHENE_MPJ24.139-23.2_cid50_subsidy-DEFAULT_CFC, before unlocking, rooting and installing custom rom.
I installed RR-N-v5.8.3-20170523-athene-Official.zip and everything was looking fantastic, until I realised my modem baseband was at 32r, when it should be 62r.
reception is non-existent.
Looking for a way to flash just the modem firmware, but haven't found any mention of it being done. Can't even locate a modem zip file to flash.
Any suggestions?
Thanks
Madmox2000 said:
I did a full wipe and loaded stock recovery, ATHENE_MPJ24.139-23.2_cid50_subsidy-DEFAULT_CFC, before unlocking, rooting and installing custom rom.
I installed RR-N-v5.8.3-20170523-athene-Official.zip and everything was looking fantastic, until I realised my modem baseband was at 32r, when it should be 62r.
reception is non-existent.
Looking for a way to flash just the modem firmware, but haven't found any mention of it being done. Can't even locate a modem zip file to flash.
Any suggestions?
Thanks
Click to expand...
Click to collapse
Wrong thread and flash soak test u will be good to go https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
joeeboogz said:
Wrong thread and flash soak test u will be good to go https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Click to expand...
Click to collapse
Thanks for the reply. Does that mean i have to flash back to stock to get the modem update?
What is the proper thread for this?
Thanks again
Madmox2000 said:
Thanks for the reply. Does that mean i have to flash back to stock to get the modem update?
What is the proper thread for this?
Thanks again
Click to expand...
Click to collapse
Yes
Related
Guys I have a G928C model which just received an OTA update of some 150MB. I can confirm that it is a fresh update which came today.
After updating I tried flashing custom recovery following the method mentioned on [HOW TO] Rooting Flashing Custom Recovery & Kernal thread. Odin fails to flash recovery, stock recovery remains. Other two images are of me trying to flash the older stock rom which gives another strange error.
Please help me out.
Did you enable the option oem unlock in developers options?
OEM unlock and usb debugging were on
MD5 of the files were ok? I assume you have the kernel/recovery specifically for your device.
No issues with MD5, kernel or recovery. Was running the device with custom recovery,kernel and root before i went back to stock and updated it OTA.
It is mentioned a few times that J5 is NOT downgradeable, so no chance to go back to you old rom!
and, if i remember right, it also has been mentioned that J5 blocks custom recovery! search in the general section!
TML1504 said:
It is mentioned a few times that J5 is NOT downgradeable, so no chance to go back to you old rom!
and, if i remember right, it also has been mentioned that J5 blocks custom recovery! search in the general section!
Click to expand...
Click to collapse
tried flashing via ODIN and now i'm stuck
can anyone help?
yaron316 said:
tried flashing via ODIN and now i'm stuck
can anyone help?
Click to expand...
Click to collapse
Try to load you Firmware by click "AP" button
dkido said:
Try to load you Firmware by click "AP" button
Click to expand...
Click to collapse
dude.... i'm really dumb...
thank you so much!
yaron316 said:
dude.... i'm really dumb...
thank you so much!
Click to expand...
Click to collapse
was is possible to flash the new firmware or its true about J5 that is not downgradable?
citytrader said:
was is possible to flash the new firmware or its true about J5 that is not downgradable?
Click to expand...
Click to collapse
it is not down-gradable. i could only install the latest firmware, if i tried the previous one, i got an error stating it cannot be downgraded.
Did you try to flash arter lastest recovery, 7.1
dkido said:
Did you try to flash arter lastest recovery, 7.1
Click to expand...
Click to collapse
nope. don't want to trip knox just yet...
After testing MM build, WiFi will not work on stock 5.1.1 build. I've tried TWRP Restore, I've tried "Return-to-stock-Tool", and I've tried XT1575 "Pure" Stock Unrooted TWRP backup found in Development section.
In settings --> Wifi --> flip WiFi switch and it turns on and right back off. This is only happing in Stock 5.1.1 build.
WiFi works fine in AICP ROM...
Any suggestions?
Thanks in advance.
Have you made sure to flash back the original modem from 5.1.1. If you still have MM modem then it definitely won't work on lollipop
timde9 said:
Have you made sure to flash back the original modem from 5.1.1. If you still have MM modem then it definitely won't work on lollipop
Click to expand...
Click to collapse
Using the "Return-to-stock-Tool" would flash the 5.1.1 modem, wouldn't it?
DJTeeJay said:
Using the "Return-to-stock-Tool" would flash the 5.1.1 modem, wouldn't it?
Click to expand...
Click to collapse
You need to flash the modem again after you flash the "Restore-to-Stock-Tool"
You will find the modem in the Tool folder (NON-HLOS.bin)
spencer92a said:
You need to flash the modem again after you flash the "Restore-to-Stock-Tool"
You will find the modem in the Tool folder (NON-HLOS.bin)
Click to expand...
Click to collapse
Worked after a few tries. Thanks!
That file has been a real problem. It says it flashes OK but really doesn't. Have Me fits in upgrading.
The one which can be flashed in tarp
Please!!!!
i don't think anything like this can be given... it's either fastboot or stock recovery!
abhi212b said:
i don't think anything like this can be given... it's either fastboot or stock recovery!
Click to expand...
Click to collapse
Or flashfire if you're rooted.
gabriwinter said:
Or flashfire if you're rooted.
Click to expand...
Click to collapse
Maybe, but i don't think there's any zip file for this....is there?
abhi212b said:
Maybe, but i don't think there's any zip file for this....is there?
Click to expand...
Click to collapse
With flashfire you can backup and restore modem partitions, they are stored by default in l4z format.
I've got my own for MM and N, my device is XT1642 if anyone want's them I can share.
gabriwinter said:
With flashfire you can backup and restore modem partitions, they are stored by default in l4z format.
I've got my own for MM and N, my device is XT1642 if anyone want's them I can share.
Click to expand...
Click to collapse
i have 1643, i doubt it'll be the same!
since nougat doesn't seem to support 2g (there's no option in the settings for it) i was wondering if i can flash the MM one to N.. will that work? any idea?
abhi212b said:
i have 1643, i doubt it'll be the same!
since nougat doesn't seem to support 2g (there's no option in the settings for it) i was wondering if i can flash the MM one to N.. will that work? any idea?
Click to expand...
Click to collapse
Even if you did I don't think it would make any difference.
If you're in stock N I recommend you stay with N modem, flashing MM modem won't help.
Open a separate question for the 2g issue in the questions & answers section, maybe someone has been able to solve it and can point you out in the right direction.
gabriwinter said:
Even if you did I don't think it would make any difference.
If you're in stock N I recommend you stay with N modem, flashing MM modem won't help.
Open a separate question for the 2g issue in the questions & answers section, maybe someone has been able to solve it and can point you out in the right direction.
Click to expand...
Click to collapse
i did search it, it's just a workaround, it's not available on settings in any case...
I made these ODIN Flashable Firmware and Modem files for myself. And figured I'd share them here for anyone wanting to upgrade their phone without having to download the entire ROM!
**** Warning!!! FLASH AT YOUR OWN RISK!!! XDA or I am not Responsible for ANY Destruction!! ****
Install Directions:
The procedure I use to install these is, In Odin Untick 'AutoReboot', then load Modem file into AP slot, Flash! When complete, Pull battery for 5 sec. Then REBOOT into Download Mode Again.
Then in Odin, load Firmware file into AP slot, Flash! When Complete, REBOOT!
Done!
N910T ONLY!!
Firmware/Bootloader:
Firmware-N910TUVS2EQE2-Firmware.tar.md5
Modem/Baseband:
Modem-N910TUVS2EQE2-Modem.tar.md5
N910T3 ONLY!!
Firmware/Bootloader:
Firmware-N910T3UVS3EQE2-Firmware.tar.md5
Modem/Baseband:
Modem-N910T3UVS3EQE2-Modem.tar.md5
Enjoy!!
They are for t or t3?
Thanks
Edit. I think they are for t only. Could you upload for t3 or explain which files to use? Can I just extract from official fimware and flash the .bin in odin? If yes, which files should I extract?
will5 said:
They are for t or t3?
Thanks
Edit. I think they are for t only. Could you upload for t3 or explain which files to use? Can I just extract from official fimware and flash the .bin in odin? If yes, which files should I extract?
Click to expand...
Click to collapse
Yes they are for T.
I can make ones for T3.
I have to download rom so it'll be awhile.
@will5 There you go!!
Great. Thanks
Question
Can it be flash with any rom or just stuck and also can it flash if your still in DOK2 baseband
nemesisgx said:
Can it be flash with any rom or just stuck and also can it flash if your still in DOK2 baseband
Click to expand...
Click to collapse
Im a little unsure about your question, so ill try to answer best I can.
Yes this can be flashed with any rom, rom doesnt matter, this is flashed in Odin! It updates your Bootloader and Modem! BUT you must pay attention to what your ROM states. Some ROMS dont work Good with certain Firmware.
About the baseband, This would update it.
Since Im new to the N910T model, Im unsure about the downgrade procedure. So You might want to check that your model can be downgraded back to DOK2 once you update. Just in case your rom dont play nice with new Firmware!!
Hope this answered your question! I added install directions to OP
aaron74 said:
Im a little unsure about your question, so ill try to answer best I can.
Yes this can be flashed with any rom, rom doesnt matter, this is flashed in Odin! It updates your Bootloader and Modem! BUT you must pay attention to what your ROM states. Some ROMS dont work Good with certain Firmware.
About the baseband, This would update it.
Since Im new to the N910T model, Im unsure about the downgrade procedure. So You might want to check that your model can be downgraded back to DOK2 once you update. Just in case your rom dont play nice with new Firmware!!
Hope this answered your question! I added install directions to OP
Click to expand...
Click to collapse
yes thank you i haven't updated my note 4 so im stock on 5.1.1 boot loader and base band as the rom goes is Dr dr.ketan Rom but thanks
Can someone test these with some roms and report back?
having issues with my Note 4 T-mobile
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
Click to expand...
Click to collapse
I would highly recommend you start a new thread for this, there are many reasons why a phone could be doing this and you need
to provide more information, like what happened before the phone was restarted, did you have a stock rom or a custom rom, were you trying to flash anything when it started restating, were you rooted, can you boot into recovery or download mode...all these things factor but like I said I would definitively start a new thread because your hijacking someone Else's and it has nothing to do with the topic.
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
Click to expand...
Click to collapse
Yes bud, you'd get better responses making your own post in question area. As I'm not on here a lot. And only people visiting this thread are few to download this link. I just seen your post.
But since I am here I'll try my best to answer you.
Judging by your post, I'm gonna assume your were on pure stock and took an Ota that went bad? Correct?
2. If you used Odin, and noticed you didn't mention getting errors.
So it leads me to ask are you using this firmware here, because this isn't the complete rom. And that's what you want!
Let me know if this is correct? Plus explain more detail? Model T or T3? Last update you were on and file you tried flashing?
And I'll help you get correct file and such.
EQE2 Modem only on DOK2 base 5.1.1 Rom?
Anyone flash just the Modem as per my title over top a Lollipop build and get any better reception or otherwise results or is this a big no go?
There are new firmware and modem QG1, hope they can be uploaded.-
will5 said:
There are new firmware and modem QG1, hope they can be uploaded.-
Click to expand...
Click to collapse
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
gmenik6 said:
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
Click to expand...
Click to collapse
Thanks, but I think those files are only for T1 variant.
Think u' re wrong, you've said to flash bootloader in AP slot (i knew in BL). Modem baseband is CP. AP is for recovery.
Hi,
I've found the following (SPERRY_SPRINT_7.1.1_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) stock ROM on firmwarecenter. But it's not a usual ROM, I can't flash the zip with TWRP as usual.
Do you guys have any link to the Sprint stock ROM ? Or any tutorial to explain how to flash a ROM like this one ?
Thank you,
Djokx
Unpack the zip file first and use fastboot for flashing whole firmware by using fastboot commands. Ex: fastboot flash boot boot.img
Djokx said:
Hi,
I've found the following (SPERRY_SPRINT_7.1.1_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) stock ROM on firmwarecenter. But it's not a usual ROM, I can't flash the zip with TWRP as usual.
Do you guys have any link to the Sprint stock ROM ? Or any tutorial to explain how to flash a ROM like this one ?
Thank you,
Djokx
Click to expand...
Click to collapse
They don't typically make stock firmware for flashing in custom recovery. Unzip, rename files from .xml to .img and install with fastboot.
Djokx said:
Hi,
I've found the following (SPERRY_SPRINT_7.1.1_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) stock ROM on firmwarecenter. But it's not a usual ROM, I can't flash the zip with TWRP as usual.
Do you guys have any link to the Sprint stock ROM ? Or any tutorial to explain how to flash a ROM like this one ?
Thank you,
Djokx
Click to expand...
Click to collapse
Here is a decent video on flashing stock firmware on a Motorola device.
Thread cleaned - could we try and answer the guy's question and avoid bickering please? Perhaps someone could zip up a Recovery Stock ROM?
madbat99 said:
They don't typically make stock firmware for flashing in custom recovery. Unzip, rename files from .xml to .img and install with fastboot.
Click to expand...
Click to collapse
This is largely true, with a few notable exceptions. Wileyfox, for instance. From personal experience.
Djokx said:
Hi,
I've found the following (SPERRY_SPRINT_7.1.1_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) stock ROM on firmwarecenter. But it's not a usual ROM, I can't flash the zip with TWRP as usual.
Do you guys have any link to the Sprint stock ROM ? Or any tutorial to explain how to flash a ROM like this one ?
Thank you,
Djokx
Click to expand...
Click to collapse
LenAsh said:
Thread cleaned - could we try and answer the guy's question and avoid bickering please? Perhaps someone could zip up a Recovery Stock ROM?.
Click to expand...
Click to collapse
Here you go
sperry_stock_7.1.1_NCQ26.69-33.zip
Untested since I do not own this device, but it should work for you.
PS. I was mentioned over here, but I guess it got cleaned. I am sure nice things were being said, right? lol
edit: Just noticed this is not the exact firmware you were looking for (33 vs 48).
Here is the one you requested
sperry_stock_7.1.1_NCQ26.69-48.zip
SuperR. said:
Here you go
sperry_stock_7.1.1_NCQ26.69-33.zip
Untested since I do not own this device, but it should work for you.
PS. I was mentioned over here, but I guess it got cleaned. I am sure nice things were being said, right? lol
edit: Just noticed this is not the exact firmware you were looking for (33 vs 48).
Here is the one you requested
sperry_stock_7.1.1_NCQ26.69-48.zip
Click to expand...
Click to collapse
Nothing bad. Someone mentioned you making stock flashable zips. And here you made one. Right on dude.