Help me, I Flash Nitrogen OS from ROM RR, but every time boot to home device want to password. and restart to TWRP is same every want to password
how fix this???
in the text I see SeLinux is Locked
help
asaefulsofyan said:
Help me, I Flash Nitrogen OS from ROM RR, but every time boot to home device want to password. and restart to TWRP is same every want to password
how fix this???
in the text I see SeLinux is Locked
help
Click to expand...
Click to collapse
You need to format /data in TWRP
Related
Hi,
sorry if that question has been already answered, but I cannot find an clear answer
I need to encrypt my cell phone, however each time I try I get an error telling that the encryption
did not finished correctly, and my cell phone is corrupteur and need to Factory reset
Is there a 7.1.2 Rom that exists with encryption working ?
if not do you know if a 6.x Rom exist that's support encryption.
Many thanks for your help.
I finely found a way to have ZUK Z1 encrypted under 7.1.2.
Below steps used:
Factory restore using All in One tool
Flash TWRP Official 3.0.2
Using TWRP installation of a 6.0 ROM
After boot and setup, enter Preference/Security/Encrypt
At this point ZUK Z1 appears encrypted
The issues are that under TWRP unable to mount or see files
I flashed lineage and open_gapps using the “adb sideload” option.
After a reboot, ZUK Z1 appears as encrypted
For the time being all is working fine, except the fact that TWRP cannot mount the device, because it’s encrypted. I guess that’s an issue with TWRP itself. I don’t know if a version exists to fix this ….
I tried to do it same way with several 6.0 ROMs still available here (a lot of dead links...) but each try using device encryption ends with an
automatic reboot and back to welcome screen without encryption.
At the moment I am using TWRP 3.1.0 (comming fomr 3.0.2) with 7.1.2 Nuclear ROM.
Any ideas? Device Encryption is important for me.
Ecoka said:
I tried to do it same way with several 6.0 ROMs still available here (a lot of dead links...) but each try using device encryption ends with an
automatic reboot and back to welcome screen without encryption.
At the moment I am using TWRP 3.1.0 (comming fomr 3.0.2) with 7.1.2 Nuclear ROM.
Any ideas? Device Encryption is important for me.
Click to expand...
Click to collapse
The 6.0 ROM that's worked for me was " Temasek-20160217-NIGHTLY-ham "
Make sure you fully factor restore using the All In One tool
boot your phone on V5 and setup your cell phone account
Then using TWRP install V6 ROM with the Temasek one.
then Encrypt your phone .... that's should work ok
then us "adb sideload" to inject the V7 Lineage ROM
Let me know at which step you are stuck !
Hey, sorry for long delay ...
It will work up to "Temasek-20160217-NIGHTLY-ham", flashing AOSP 4.6 (Android 7) by sideload will cause "Password wrong" problems while booting
decrypting data partition. Still hope to get a way working zu install AOSP 5.1 (Android 8.1) with full encryption. Tried TWRP 3.02 and newer 3..2.1.
no worry about "password", I already installed nightly build of Lineage without issues using sideload.
Of course I got the message about password, I just ignore it
the only point is that I had to install TWRP V2.8.7 and not 3.x. because with 3.x sometimes I was not able
to boot recovery mode.
Before each install I fully backup my cell phone in case of .... SMS, Pictures etc...
Good luck,
The problem is not the password while starting to recovery 3.x.x, its the password while booting...
1. Factory restore using All in One tool (okay, works)
2. Setup Phone and encrypt (works, okay - Password will be accepted)
3. Flash TWRP (3.02 / 3.2.1.0) - tried both (okay, works - Password for encryption Recovery will not be accepted
4. I skip that and sideload flash (clearing cache etc.) "Temasek-20160217-NIGHTLY-ham.zip" (okay, Recovery = not, While Booting = Password accepted) (I choosed PIN and something like : OfferMe#1963ZU several times)
5. I skip Password in Recovery and sideload flash (clearing cache) "lineage-14.1-20180124-nightly-ham-signed.zip" (okay, Recovery still not, While Booting = Password NOT accepted)
Seems no matter if Lineage ROM 14.1 or higher...
Still confused
I am not using password at boot. I only set a password to unlock the phone after boot.
I encrypted my data for work app and set a PIN code.
In TWRP it ask me for a pattern!?
So I set a pattern as lock in this ROM, then in TWRP it ask me for a PIN code !!!
And finally the ROM didn't boot anymore...
Sh*t !
I had to format data...
Any explanation?
TWRP 3.2.3.0
ROM pixel experience pie
lcarolo said:
I encrypted my data for work app and set a PIN code.
In TWRP it ask me for a pattern!?
So I set a pattern as lock in this ROM, then in TWRP it ask me for a PIN code !!!
And finally the ROM didn't boot anymore...
Sh*t !
I had to format data...
Any explanation?
TWRP 3.2.3.0
ROM pixel experience pie
Click to expand...
Click to collapse
Bcoz hardware encryption isn't working on any of the pie roms till now!
vishalkumar437 said:
Bcoz hardware encryption isn't working on any of the pie roms till now!
Click to expand...
Click to collapse
actually it works in the ROM, but TWRP can't decrypt it...
so you can encrypt data with a PIN, but then in TWRP you will never have access to it again...
so kind of tricky, better to not encrypt with PIE till now...
So my problem is the encryption every time i try to install a pie rom my phone ask me for a password in the recovery they say "encrytion sucesfull" so i try to wipe the rom and the same problem, i flashed the rom with a clean flash but all the pie roms for me are having the same problem, i know theres an option to remove encryption on the TWRP but when i type yes my phone automatically says me unable to mount storage unable to mount anything and basicly is dead i tryed to fix that changing the phone file contexts but nothing and to recover i need to reflash the stock firmware ands its likea a loop i revive my phone later install the recovery next install a pie rom then the pie rom not working (All the new pie roms) and later come back to the stock firmware, so im really frustated for that problem so im asking for a solution please help me:crying: . (Sorry for my bad english)
RealDogeMx said:
So my problem is the encryption every time i try to install a pie rom my phone ask me for a password in the recovery they say "encrytion sucesfull" so i try to wipe the rom and the same problem, i flashed the rom with a clean flash but all the pie roms for me are having the same problem, i know theres an option to remove encryption on the TWRP but when i type yes my phone automatically says me unable to mount storage unable to mount anything and basicly is dead i tryed to fix that changing the phone file contexts but nothing and to recover i need to reflash the stock firmware ands its likea a loop i revive my phone later install the recovery next install a pie rom then the pie rom not working (All the new pie roms) and later come back to the stock firmware, so im really frustated for that problem so im asking for a solution please help me:crying: . (Sorry for my bad english)
Click to expand...
Click to collapse
Go to recovery, DON'T decrypt data (click in cancel when the dots shows up), go to wipe and format data. You shouldn't see any errors formating data if you don't deprypt it first.
As far as I know the only roms that support encryption is Bootleggers and Havoc, but with Havoc I lose mobile internet after some time and with Bootleggers gcam doesn't work for me.
I cant access my phone after flashing miui.eu rom(going from syberia project) because it asks me to enter pin/pattern on the first boot ,when i try to enter my previous pattern used on syberia it says it is a wrong pattern. Same thing happened when i tried to log into twrp after flashing,it wont accept my previous pattern.
Does anyone have any suggestion ?
Milanko92 said:
I cant access my phone after flashing miui.eu rom(going from syberia project) because it asks me to enter pin/pattern on the first boot ,when i try to enter my previous pattern used on syberia it says it is a wrong pattern. Same thing happened when i tried to log into twrp after flashing,it wont accept my previous pattern.
Does anyone have any suggestion ?
Click to expand...
Click to collapse
You have to format data partition
Milanko92 said:
Does anyone have any suggestion ?
Click to expand...
Click to collapse
You have to format the /data partition which will make you lose all your stuff from the internal storage
Milanko92 said:
I cant access my phone after flashing miui.eu rom(going from syberia project) because it asks me to enter pin/pattern on the first boot ,when i try to enter my previous pattern used on syberia it says it is a wrong pattern. Same thing happened when i tried to log into twrp after flashing,it wont accept my previous pattern.
Does anyone have any suggestion ?
Click to expand...
Click to collapse
The solution is delete all acounts in your device, before to install the rom.
To install EU MIUI the devices is encrypted data... reinstall the rom via fastboot, after, in recovery original, wipe data.
Luck!
Milanko92 said:
I cant access my phone after flashing miui.eu rom(going from syberia project) because it asks me to enter pin/pattern on the first boot ,when i try to enter my previous pattern used on syberia it says it is a wrong pattern. Same thing happened when i tried to log into twrp after flashing,it wont accept my previous pattern.
Does anyone have any suggestion ?
Click to expand...
Click to collapse
Orangefox recovery > delete Rom password
Gesendet von meinem Redmi Note 7 mit Tapatalk
I'm on MIUI 12, I'm not able to install TWRP recovery properly.. internal storage is encrypted.. not able to flash anything. anyone has a solution ? thanks in advance !
Harshadd30 said:
I'm on MIUI 12, I'm not able to install TWRP recovery properly.. internal storage is encrypted.. not able to flash anything. anyone has a solution ? thanks in advance !
Click to expand...
Click to collapse
When, entering TWRP, it asks you for PIN/password.
You have to enter your pin/password you have defined in Android for unlocking the screen.
TWRP must then confirm that it successfully decrypted for user 0 (for user 999 it would fail, do not wory about)
This is really nothing new, but you must not use an outdated TWRP that does not ask or does not support it properly
If having problems, reboot to Android and reset your pin/password.
Some TWRP versions may not support properly if you use pattern in Android - hence better switch to pin.
However, if you cannot make it with pin, reboot again to Android, redefine to pattern and try
zgfg said:
When, entering TWRP, it asks you for PIN/password.
You have to enter your pin/password you have defined in Android for unlocking the screen.
TWRP must then confirm that it successfully decrypted for user 0 (for user 999 it would fail, do not wory about)
This is really nothing new, but you must not use an outdated TWRP that does not ask or does not support it properly
If having problems, reboot to Android and reset your pin/password.
Some TWRP versions may not support properly if you use pattern in Android - hence better switch to pin.
However, if you cannot make it with pin, reboot again to Android, redefine to pattern and try
Click to expand...
Click to collapse
i have tried, i swiped to allow modification but it does not asked for password, goes straight in recovery mode & i can not access my files from there, i also tried removing password completely to unlock phone but still got the same issue.. i have heard that files are encrypted on android 11, so i posted this question..
thank you
Harshadd30 said:
i have tried, i swiped to allow modification but it does not asked for password, goes straight in recovery mode & i can not access my files from there, i also tried removing password completely to unlock phone but still got the same issue.. i have heard that files are encrypted on android 11, so i posted this question..
thank you
Click to expand...
Click to collapse
Make sure you use the latest official TWRP for davinci
Which "notifications" - it's about Passwords and Security in Android. You can try by removing Android unlock pin/pass, reboot to Android and set it again and then try with TWRP.
Again, make sure you use up-to-date TWRP, best the official
twrp-3.5.2_9-0-davinci.img (if you were not familiar with and TWRP does not ask, maybe you are on an ancient and maybe some unofficial TWRP)
HI, I updated to V12.1.4.0.RFJMIXM and tried to install the latest TWRP but booting into recovery mode TWRP is in this like read only mode and dosnt bring up the usual thing to decrypt your files. It says unmodified system partition. Keep system read only? TWRP can leave your system partition unmodified to make it easier for you to take official updates. TWRP will be unable to prevent the stock ROM from replacing TWRP and will not offer to root your device. Then it says keep read only or swipe to allow modifications. Any suggestions? Tried removing and adding security pin but didnt work
I need it to install magisk. I tried patching a recovery image with magisk which worked. But trying to boot to magisk with recovery dosnt work. I hold the keys and then when it vibrates let go but it always goes to stock recovery. Not system with magisk as it talks about.
Harshadd30 said:
i have tried, i swiped to allow modification but it does not asked for password, goes straight in recovery mode & i can not access my files from there, i also tried removing password completely to unlock phone but still got the same issue.. i have heard that files are encrypted on android 11, so i posted this question..
thank you
Click to expand...
Click to collapse
This seems like a bootloop. Did you change any roms before this happened? You might have to format (not wipe) your data partition which unfortunately will also delete all your files from the phone's internal storage.