(SOLVED) Zenfone 2 laser Z00LD (ZE550KL) (2GB RAM) (MSM8916) completely bricked - Zenfone 2 Laser Q&A, Help & Troubleshooting

I request someone please upload the full emmc dump or post it here. my device has been bootloader locked so cant flash the fastboot userdata.img its stopped working. i need a emmc dump rescue.
thanks in advance.
Update:1
i have dumped whole emmc on other device ze550kl it has bootloader unlocked and rooted with supersu. the point is when i try to write the full image using EMMC RAW Tool it gives an error write failed at the end of it. Phone doesn't boot and it goes to quallcomm bootloader 9006 or fastboot mode. if i try the rescue files which on the other thread (https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527 ) phone boots to fastboot mode but i cannot access the recovery or it wont boot to recovery. this is what i have done several times when it boots to 9006 mode i have deleted all 29 partitions in minipartition tool then created only one ext4 partition as a primary then it goes to 9008 mode. almost i tried all suggestions from addy692 nothing really worked as expected. if you have some ideas regarding this issue let me know in this thread.
Update:2
i have unbricked Z00LD from the dead and Please download the folllowing file ZE550KL_MP_RunChange_0721_Ver136_8916_V001.zip and extract it to somewhere else then write all partitions using EMMC RAW tool
if you are facing write error leave them, some partitions may fail to write i don't know why please choose write selected partitions and uncheck some of the partitions if you facing write error,you have to do it manually by checking one by one and write them as well. when its done connect your phone to fastboot mode if its not working try unbrick files https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527 then flash the Raw Firmware which you downloaded earlier that's it. if you face imei null afterwards Restore the QCN backup with QPST.
EMMC Firmware Filename:ZE550KL_MP_RunChange_0721_Ver136_8916_V001.zip
Link: https://mshare.io/file/yrABO9v
Raw Firmware Filename: WW_ZE550KL_21.40.1220.1943-rel-user-20161109095104-secured-releaseAFT.zip
Raw Firmware link: https://drive.google.com/uc?id=1AF-dGVJXOl-THcvOj36wt1OTTI33kedp&export=download
if you dont have qcn backup or file this guide helps you to recover your imei.
IMEI null fix: https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/

Found an EMMC dump here https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527

R3DC0D3 said:
Found an EMMC dump here https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527
Click to expand...
Click to collapse
Cannot find ZE550KL (Z00LD) marshmallow emmc dump on that website.

karthikeyan346 said:
Cannot find ZE550KL (Z00LD) marshmallow emmc dump on that website.
Click to expand...
Click to collapse
EDIT: I just realized that there is only 600KL an not 550KL, that's a problem because I'm also looking for the 550KL, but maybe is compatible as the firmware is labeled Z00LD too. I'll update you if I find something.

Have you find any link ?

unfortunately nope. But my phone is back again working just doing some work from TWRP and leaving it bootlooping for an hour.

R3DC0D3 said:
unfortunately nope. But my phone is back again working just doing some work from TWRP and leaving it bootlooping for an hour.
Click to expand...
Click to collapse
how did you get your phone working again ? does it survive from bootloop.

karthikeyan346 said:
how did you get your phone working again ? does it survive from bootloop.
Click to expand...
Click to collapse
used TWRP to repair all partitions, flashed stock recovery, stock boot an stock rom, leaved it bootlooping for half an hour and he started.

Did you unlocked your bootloader before flashing twrp.

anyone figured out how to do repartition of ze550kl?
---------- Post added at 05:09 AM ---------- Previous post was at 05:05 AM ----------
R3DC0D3 said:
used TWRP to repair all partitions, flashed stock recovery, stock boot an stock rom, leaved it bootlooping for half an hour and he started.
Click to expand...
Click to collapse
How did you flashed twrp, because when i try to flash twrp, an "remote partition table not found" error occurs?

finally i have unbricked Z00LD the only one issue that i cannot unlock my device using asus official unlock app. it gives unknown error.

Thanks, this finally un-bricked my Z00LD!

christian.arvin said:
Thanks, this finally un-bricked my Z00LD!
Click to expand...
Click to collapse
Soft bricked or hard bricked? Somehow my device go into bootloop yesterday after that I have clean flashed but it is not booting now. Any help will be appreciated.

Sum1992 said:
Soft bricked or hard bricked? Somehow my device go into bootloop yesterday after that I have clean flashed but it is not booting now. Any help will be appreciated.
Click to expand...
Click to collapse
HardBrick, all partitions were wipe out. The downside is, i idid not make a backup of my NVRAM.

Related

endless bootloops and no solution :(

Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
try the three bottoms way update
but the dload file is formated sd card and shut down the phone and use the volume down and up and power at the same time and it will install the update.app but you must have stock recovery
raider2k9 said:
Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
Click to expand...
Click to collapse
Can you still enter TWRP? Have you tried doing a Factory Reset?
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
is there some possibility to flash the phone with SPFlashTool to recreate partitions?
is it possible to get this repaired at a huawei-center? i´ve only unlocked bootloader and flashed twrp, but did not install root.. should relock bootloader be enough?
raider2k9 said:
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
Click to expand...
Click to collapse
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
R0flC0pt3r said:
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
Click to expand...
Click to collapse
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
raider2k9 said:
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
Click to expand...
Click to collapse
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
R0flC0pt3r said:
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
Click to expand...
Click to collapse
I have insurance.. but will they repair it, after all I have tried?!?
fastboot is working for example "fastboot devices" or so on.. only flashing ends up giving errors
So now my P8 was repaired because of damaged mainboard..
the situation now is, I have a full twrp-backup of my old device, but of course with the old IMEI.. now with a new mainboard it also has a new IMEI..
so can I restre my old backup, when keeping the EFS with the new IMEI or wont this work, because the backup was made with another IMEI?
can somebody tell me, if this is going to work?
hi
i same problem way ?
Try to flash this custom rom via recovery "do full wipe" , when your device work, then you can go back to stock rom via updater app. Or you can stay in this custom rom If you like it.
Here is the link for the custom rom :
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Hi Guys
Is there posibility to flash stock rom via TWRP ?
thnx
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
raider2k9 said:
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
Click to expand...
Click to collapse
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
XDADEVX said:
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
Click to expand...
Click to collapse
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
raider2k9 said:
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
Click to expand...
Click to collapse
how much did u pay ?
as I said.. it got repaired under warranty, so I had nothing to pay
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
even if u messed it up ? they didn't tell you that u modified phone ? what did u tell them ? are you in UK ? I just sent it to huawei today mornning
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
how long did u have to wait ? when they sent it back to you ?

[Help] Is there a way to revive Nexus 6P using Qualcomm HS-USB QDLoader 9008 mode ???

Hii guys is there a way to fix and get Nexus 6P back in working condition using the Qualcomm HS-USB QDLoader 9008 mode. My Nexus 6P doesn't boot beyond Google splash logo,it ends in a boot loop. I have tried flashing stock firmware package using fastboot as well as Wugsfresh Toolkit flashed latest Android Nougat 7.0 firmware but still its same ending in a boot loop at Google splash logo during boot. I can access Recovery & Bootloader but flashing of Stock Firmware package or custom rom doesn,t work at all.
U can even say that my phone is stuck on boot logo nothing happens beyond it, just reboots back to the boot logo and the loop continues.
So is there a way to fix this issue using Qualcomm HS-USB QDLoader 9008 mode ??? Please help if u can.
Did you backup and restore your EFS like you're not supposed to?
If not I could possobly help you through teamviewer.
Gytole said:
Did you backup and restore your EFS like you're not supposed to?
If not I could possobly help you through teamviewer.
Click to expand...
Click to collapse
Yeah i created a backup of WETA Rom..with which i even created a backup of EFS using TWRP 3.0.2-1 .
And later i tried to restore the backup & i think i left the EFS Partition ticked. So EFS partition was restored along with other partitions.
Gytole said:
Did you backup and restore your EFS like you're not supposed to?
If not I could possobly help you through teamviewer.
Click to expand...
Click to collapse
And i think i have screwed by leaving the EFS Partition ticked while restoring the ROM.
Is there a solution for this ???
StariX37 said:
And i think i have screwed by leaving the EFS Partition ticked while restoring the ROM.
Is there a solution for this ???
Click to expand...
Click to collapse
No. Unless you have a EFS backup from a TWRP prior to 3.0.2-1 you're bricked.
This is a common issue. You are NOT supposed to restore EFS unless you lost your IMEI. I think...lol don't quote me.
You have to rma.
IIRC there is an adb command to erase the EFS and let the phone regenerate it?
so what happened
i also have same problem i tried everything which can be
pls guide me how to restore/unbrick this bloody phone

[SOLVED] [Loop] Your device is corrupt it cannot be trusted and will not boot

Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
docizoc said:
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
Can you boot to TWRP?
Did you make a backup and have access to it? Especially the EFS partition? If you do, restore the EFS partition.
If you can boot to TWRP, try the following:
- wipe everything (the option where you have to type 'yes').
- download lineageOS and flash it. If this is working fine, install whatever ROM you want to install.
no access to twrp anymore , no backup , only access to download mode now
is there a way to flash back twrp or stock recovery from download mode ? boot into fastboot ?
(i know... i have no excuses , but made that so many times without issues ...)
thank you in advance
Maybe you should go in download mode and flash stock Rom with LGUP.
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Can you flash twrp through lgup or fastboot?
For those that could be in the same situation i finally succeed to flash with LGUP last version but without the 8894DLL
the error was probably coming from the dll.
Cheers and thanks all for the answers
docizoc said:
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
It's probably a problem with the DLL, try to extract it from the kdz and input it in Lgup folder (I don't remember where and I'm not home, check the main thread for that) and after that retry flashing
EDIT : well you were faster than my phone glad it worked for you.

ask/help urgent

stuck in fastboot mode,have no recovery.
pc detect 9008.flashing every firmware still same,recovery twrp 3.0 2 succes to install but cant touch,other recovery fail to instal.any body helpme,qpst file with qcn same error
i know this is wrong thread,but this forum zenfone 3 going to silent,so iam post here,wreally sorry
:crying:
herumukti9901 said:
stuck in fastboot mode,have no recovery.
pc detect 9008.flashing every firmware still same,recovery twrp 3.0 2 succes to install but cant touch,other recovery fail to instal.any body helpme,qpst file with qcn same error
i know this is wrong thread,but this forum zenfone 3 going to silent,so iam post here,wreally sorry
:crying:
Click to expand...
Click to collapse
Hi,
I don't understand anything from what you wrote. If the phone never turns on, you may need to remove and insert the battery. You can warm the back cover with a hair dryer and open it. This requires material. I don't speak English.
Bye.
herumukti9901 said:
stuck in fastboot mode,have no recovery.
pc detect 9008.flashing every firmware still same,recovery twrp 3.0 2 succes to install but cant touch,other recovery fail to instal.any body helpme,qpst file with qcn same error
i know this is wrong thread,but this forum zenfone 3 going to silent,so iam post here,wreally sorry
:crying:
Click to expand...
Click to collapse
you need to install raw software with asus flash tool
SOLVED
flash use qpst

Unable to boot - Oneplus8 pro

Hi Everyone,
I have an issue with my Oneplus8 pro and below are the details
1. The device was working perfectly. I was interested to root the device and install a custom ROM.
2. The method used was to try and flash a patched boot image for the device but I think i landed up using a wrong boot image file.
3. The OS was on 10.5.10 if I remember correctly. I used a patched image file I suppose of an older firmware. Now restarts and goes to "QUALCOMM Crashdump mode". The only options are
a. reboot to fastboot mode
b. flash the TWRP for Oneplus 8 pro but that doesnt mount by storage so cant really transfer anything to flash again.
Requesting some help to fix the issue and apologies if i have not explained correctly.
Tried booting a stock boot image?
neverborn said:
Tried booting a stock boot image?
Click to expand...
Click to collapse
Hey,
Thank you for a quick repsonse. Yes, i had tried doing that and still the same error however while we speak, i just downloaded the msmDownloadtool and tried using it to flash a stock firmware and finally, i am so happy to see the device boot sucessfully
Thank you once again for tryin to help
Regards
Hello.
Clarify exactly how the procedure took place

Categories

Resources