Joying with intel sofia + Mitsubishi Outlander/Lancer with rockford = harness problem - Android Head-Units

Anyone successfully installed joying to Mitsubishi Lancer/Outlander 2007-2012 with rockford to have armrest USB, SWC and stock Mitsubishi camera working?
Please post information (preferably with links) which wires and connectors did you order. I am struggling with many no-name connectors available in car-audio stores and they don't work...
Sent from my Nexus 5X using XDA-Developers Legacy app

juniorkm7 said:
Anyone successfully installed joying to Mitsubishi Lancer/Outlander 2007-2012 with rockford to have armrest USB, SWC and stock Mitsubishi camera working?
Please post information (preferably with links) which wires and connectors did you order. I am struggling with many no-name connectors available in car-audio stores and they don't work...
Click to expand...
Click to collapse
Might have to trace wires and build your own harness

does anyone know which canbus decoder will work with Joying 124N2 and Mitsubishi Rockford amp?
Sent from my Nexus 5X using XDA-Developers Legacy app

I have a suzuki kizashi which also HAD a fosgate system in at one point very similar to that of the mitsu.
though I now run an aftermarket amp, I'm still using the factory wiring and just spliced in to the harness of the fosgate system for the amp outputs but also wiring between the headunit and amp location.
I am not running any of the factory fosgate anymore, just using the wiring.
lucky for me I had another user already do a similar mod, and had every wire in the car decoded and documented so splicing the 20 or so wires wasn't too bad.
this looks like it may work for you
https://aerpro.com/chmb1c
and
https://aerpro.com/camt01
I have to say though, the fosgate systems don't sound all that great without the original headunit as you lose the factory EQ they put in the headunit, isn't an issue anymore since i run an outboard DSP and Amp.

OK I have finally installed the Joying Head Unit with a help of a friend who is Mitsubishi freak and knows everything about every cable and fuse in the car. To make it work I needed to buy additionally MITO-02 adapter and USB adapter for armrest located port. SWC is easy -connect KEY1 cable from Joying harness to one of the MITO-02 wires (brown-sky blue) cutting isolation a bit and plugging this cable to create some T connection.
The only concern for now is that the radio doesn't turn on and off with ignition. Stays on all the time. Any ideas how to change it? I was thinking on swithching cables ACC to 12V+ and vice versa. Will it work?

Related

NO SOUND on Android 4.4 RK3188 based HU.

EDIT - FIXED - It was the "Amp On" signal, which on the Metra unit was on another part of the harness all by itself, which I thought was just useless RCA jacks.
I bought the following HU: http://www.amazon.com/gp/product/B014J88PDM
This is an RK3188 based Android 4.4 unit.
I had VERY few choices due to my car having a single-DIN opening and no room without cutting up the AC vents (which I won't do) and spending $200 on a Double DIN kit.
So I got everything wired up using a Metra XSVI-6515-NAV kit which interfaces CANBUS and ISO connectors to the radio. I am 100% certain that all wires are correct and secure.
There is NO factory amp turn-on wire, so that's not the issue. The only wires not connected on the CANBUS connector is the speed sensor wire (not supported on my radio).
The problem - I have ZERO sound. The unit turns on and functions in all other aspects - but it outputs no sound!
Any ideas?
lotherius said:
EDIT - FIXED - It was the "Amp On" signal, which on the Metra unit was on another part of the harness all by itself, which I thought was just useless RCA jacks.
I bought the following HU: http://www.amazon.com/gp/product/B014J88PDM
This is an RK3188 based Android 4.4 unit.
I had VERY few choices due to my car having a single-DIN opening and no room without cutting up the AC vents (which I won't do) and spending $200 on a Double DIN kit.
So I got everything wired up using a Metra XSVI-6515-NAV kit which interfaces CANBUS and ISO connectors to the radio. I am 100% certain that all wires are correct and secure.
There is NO factory amp turn-on wire, so that's not the issue. The only wires not connected on the CANBUS connector is the speed sensor wire (not supported on my radio).
The problem - I have ZERO sound. The unit turns on and functions in all other aspects - but it outputs no sound!
Any ideas?
Click to expand...
Click to collapse
On some Metra units there's a potentiometer which adjust the output level. Check that one for a middle position.

Jy-UL128N2 - Wiring of canbus decoder box

Hi all!
I have just installed a Joying JUL128N2 in my 2007 Alfa Romeo 159.
Overall, I am happy with this unit.
I have read through most of the posts regarding this unit, and that has helped me to solve a lot of issues in the last 3 days. For that, I thank this community!
Anyway, I still haven´t hook up the canbus box to enable my steering wheel controls. I have the following question:
Installation
I have purchased an ISO wiring adapter kit for my car (CTSAR002.2), which includes a canbus decoder box connected inline, (by a plug in one end of the box) between the car side of the wiring and the headunit side. It seems that wires go in and out from this same plug (at least 3 come out and are free)
There is another plug in the opposite end of the box that should be used to connect to specific radio brands. I received a universal version of that cable (CTMULTILEAD.2), which has 3 wires and a 3.5mm jack plug.
Question: Do I need to use the “multilead” patch, or should I use the 3 free wires coming from the front part on the main harness?
In any case, what goes where?
The mentioned cables for reference:
http://www.connects2.co.uk/Product/ProductItem/CTSAR002.2
http://www.connects2.co.uk/Product/ProductItem/CTMULTILEAD.2
Furthermore: is it possible for other car brands, other than VAG group, to send more information to the HU, such as parking assist and other car info?
Thanks very much!

SOLVED Joying head unit with factory VW Amp

I have a 2007 VW Golf with the factory fitted amplifier under the seat. How do I make this work with my Joying head unit? I see the orange AMP wire coming out the back of the unit but I don't know what to connect it to...
SOLUTION
You need to provide power to the AMP-CONT orange wire, this can be done by plugging it into the empty hole next to the blue wire going into the CANBUS box, then Amp option in Device>Sound is set to On.

Need help with canbus issues on my 2005 SLK R171 running Erisin PX5

Hi professionals. Thanks for reading my plea for help. I have a 2005 SLK 200 R171. I recently decided to change my player from the usual audio 20 with cd changer to this Erisin Android PX5 head unit i got off aliexpress. When i received it, i noticed that the harness supplied with the player did not fit my car. Hence i opted to buy a Dynavin harness which by pictures the harness fitted my original plug but the cable attaching to my headunit did not. So i did my rewiring myself. Followed the usual colour and power and got the headunit powered up. However i noticed the can bus is fed with one constant wire, one ground wire, and both the can high and can low cables from the car. And there are 3 cables that goes from the canbus unit to the headunit i.e. brown for reverse, red for acc, orange for illumination. I have 2 more wires with a small harness (White and white/black stripe wire) that does not have an input to anywhere (I believe that Is the canbus high and low to the headunit) and a blue wire. On my headunit harness, according to the wiring diagram attached with the player, there is only one wire going to the can low socket and the can high is empty. Hence i attached my can low from the headunit to a blue wire from the canbus and noticed my steering wheel controls work (volume buttons and +/- track). However, the display on my dash says audio off. Also my rear view camera goes on and off (I looped the trigger wire to the reverse brown wire that exits the canbus and goes to the headunit reverse). I will try an attach a video. Does anyone know if i have made a mistake in the wiring? And does anyone have a wiring diagram for the can bus decoder (brown semi transparent box)?
Any help is very very much appreciated. Thanks tonnes.
My issue link
vimeo dot com slash 462084336
( sorry wasnt allowed to post a link)
Hello Haven,
Did you ever receive an answer? I am having a similar issue. I bought an android head unit with can bus decoder. Almost all the wiring harnesses were wrong and I had to rewire myself. the chinese supplier did not provide any wiring diagrams or pinouts, (claims they do not have any). I finally got my reverse camera, sound, and steering wheel controls working. (all come directly into head unit. The can bus decoder does not seem to be connected to the can H and Can L from the vehicle. I have the same 3 wires from can bus decoder box to android head unit. I am certain based on the other wire harnesses received that the wiring from car to can bus decoder is wrong. Can you tell me what two pins the Can H and Can L are fed to on your decoder box?

Help with Aerpro Harness

Hi All,
I have a 2013 Kia Sportage Platinum.
I have purchased the following items to install an aftermarket headunit to gain Android auto;
aerpro-apa47
AERPRO-CHKI14C
AERPRO-APP9PIO8
aerpro-fp8011
AERPRO-APRTK2
PIONEER-SPH-DA360DAB
Attempted install and found that the steering wheel controls won't work and there is no sound coming from speakers.
I've triple checked all connections and I believe I have everything plugged in correctly.
The CHKI14C I am assuming is the issue. Have I purchased the wrong item for my car?
Or have I missed something?
There is a blue/white wire that is not connected from the AERPRO-CHKI14C. States amp remote wire but not sure if I need to splice it in somewhere.
Thank you.
I have attached the manuals for the factory headunit (lan8900 - has optional 24pin TYCO AMP and therefore no connector B within the 26pin power connector) and for the AERPRO-CHKI14C (CTSKI009.2).

Categories

Resources