From Root to Pure Nexus (7.1.2) - Nexus 6P Q&A, Help & Troubleshooting

Requesting guidance before I brick my phone.
I currently have bootloader unlocked, twrp installed, and my nexus 6p rooted. I'm running 7.1.2. I've also changed a line in the (build.prop) provisions in order to tether free (since I am on at&t)
Basically, I'm wanting to install pure nexus. I have the custom rom file and the vendor image file.
Before I install from, I'm wondering if I need to unroot first? Also curious if how "shamu" will affect things since I'm on Angler.
Thanks!

Okay you need to stop everything you're doing and read this topic until you know what is what.
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page577
First of all, you obviously wouldn't flash a Shamu package on Angler. That's a great way to brick your phone, permanently.
Read every single step in that guide above, even if you don't think it's pertinent to what you're trying to do. Read it a second, third, fourth, fifth time until you know the steps by heart. Until you know what's next.
Also, download the correct Angler zip file and DO NOT FLASH A SHAMU ZIP ON YOUR PHONE.

help
RoyJ said:
Okay you need to stop everything you're doing and read this topic until you know what is what.
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page577
First of all, you obviously wouldn't flash a Shamu package on Angler. That's a great way to brick your phone, permanently.
Read every single step in that guide above, even if you don't think it's pertinent to what you're trying to do. Read it a second, third, fourth, fifth time until you know the steps by heart. Until you know what's next.
Also, download the correct Angler zip file and DO NOT FLASH A SHAMU ZIP ON YOUR PHONE.
Click to expand...
Click to collapse
Any help on flashing back to stock using TWRP? I unlocked the bootloader and rooted my device (never made a backup till after but still proved to be of no help as it wont work when trying to restore) lesson learned for sure. but i cant boot the device up however i still have access to twrp recovery how can i go back to stock so i can start from scratch?? :crying:

Filly2 said:
Any help on flashing back to stock using TWRP? I unlocked the bootloader and rooted my device (never made a backup till after but still proved to be of no help as it wont work when trying to restore) lesson learned for sure. but i cant boot the device up however i still have access to twrp recovery how can i go back to stock so i can start from scratch?? :crying:
Click to expand...
Click to collapse
You can follow the original advice I posted above. Read that thread I linked. It's ALL covered there. No sense in me writing everything up here when all you need to do is click the link I posted and follow the return to stock sections. There's even one for maintaining your data. Read the thread. It covers literally everything.

..
RoyJ said:
You can follow the original advice I posted above. Read that thread I linked. It's ALL covered there. No sense in me writing everything up here when all you need to do is click the link I posted and follow the return to stock sections. There's even one for maintaining your data. Read the thread. It covers literally everything.
Click to expand...
Click to collapse
Sorry I don't mean to bug man but I'm so lost. I'm trying to find what you are referring me to but I'm not finding the info I need I haven't been on here too often so this is like a pain in my rear so far. Plus I'm a very hands on kinda learner so I need some like handicapped help lol If you don't mind I don't want to pester anyone...

I was able to load pure Nexus. I didn't realize there was a pure nexus rom with Angler on it.
My main question was if I had to reverse the root. But I'm good to good now.
Rom loaded, vendor image loaded, and Google Apps loaded.

Related

Help installing ICS!

I'm a relatively new user of the android device and I was wondering if someone could help me install ICS on my phone.
The first thing I did was the section 5 of this thread to root my phone: http://forum.xda-developers.com/showthread.php?t=1238070
Then, I tried following the instructions on this thread to install ICS: http://rootzwiki.com/topic/11850-romicsiml74k-teamhacksungs-ics-port-for-fascinate-build-5-0114/
One thing I noticed from reading around though, was that I needed to do a NANDROID backup. In order to do that, I downloaded the 'ROM Manager' and tried to 'Reboot into Recovery'. However, it wouldn't boot into recovery, so I did a quick search and figured out the solution, which was found here: http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
In order to solver this problem, I realized that I had to download a kernel that's applicable to my drive. I'm now looking at my kernel version to figure out which file to download, but I'm having a hard time going from there.
As you can see, I'm kind of all over the place, so I decided to stop before I screw up my phone. Can anyone please help me out or point me to the right direction?
Thank you!
Bauss said:
I'm a relatively new user of the android device and I was wondering if someone could help me install ICS on my phone.
The first thing I did was the section 5 of this thread to root my phone: http://forum.xda-developers.com/showthread.php?t=1238070
Then, I tried following the instructions on this thread to install ICS: http://rootzwiki.com/topic/11850-romicsiml74k-teamhacksungs-ics-port-for-fascinate-build-5-0114/
One thing I noticed from reading around though, was that I needed to do a NANDROID backup. In order to do that, I downloaded the 'ROM Manager' and tried to 'Reboot into Recovery'. However, it wouldn't boot into recovery, so I did a quick search and figured out the solution, which was found here: http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
In order to solver this problem, I realized that I had to download a kernel that's applicable to my drive. I'm now looking at my kernel version to figure out which file to download, but I'm having a hard time going from there.
As you can see, I'm kind of all over the place, so I decided to stop before I screw up my phone. Can anyone please help me out or point me to the right direction?
Thank you!
Click to expand...
Click to collapse
Use droidstyle's guide for everything. It is step by step, no way to fail.
Sent from my SCH-I500 using XDA App
First you don't need to root your phone to flash a new rom. We almost need his in big bold letters in the guide, because this is a huge misconception.
I never do.nadroids, I back up what I want and reinstall.the programs I need. You can always Odin back to stock if.something goes wrong. The advantage to rooting is that you.can now use titanium backup to back up your programs. (I have the least problems if I install them from the market and then restore data only.)
Then flash CWM fixed for CM7. Three finger into recovery. If the phone boots it will reflash the stock recovery and you'll have to flash it again.
Install ICS.
??
Profit.
I see You found section 5 in my guide, but you missed the part right at the top that says "this is not needed if flashing a custom rom". Also, how did you miss section 3 that has the exact instructions for putting ICS on your phone?
droidstyle said:
I see You found section 5 in my guide, but you missed the part right at the top that says "this is not needed if flashing a custom rom". Also, how did you miss section 3 that has the exact instructions for putting ICS on your phone?
Click to expand...
Click to collapse
Damn it, you're right. I guess I'm an idiot.
Is it OK that I go straight to section 3 right now? Or must I un-root the device first?
No your fine to move ahead, a rooted phone wont hurt you.

[SOLVED] Vibrant Root Concerns

Hey there. I rooted my Vibrant successfully, but realized I left some important things out. I used this guide to root my Vibrant: http://forum.xda-developers.com/showthread.php?t=723479
The problems:
1) I can't nandroid (not that I need to, I only have 4 apps)
2) I would like to install either Miui v4 or CyanogenMod 9 but cannot as my recovery screen does not show me the options to do so (I only get the 4 options you normally would get unrooted, such as "Reinstall Packages"), so I'm stuck with the lame default homescreen.
3) I'm currently on 2.1-update1; should I upgrade to 2.2? If so, must I unroot to upgrade, and then reroot? And if this were the case, how do you unroot, and can I reroot using the same method in the link above?
Also, I was looking at this guide: http://wiki.cyanogenmod.com/wiki/Sa...te_Guide#Installing_the_ClockworkMod_Recovery
and noticed the line "This guide assumes the Samsung Vibrant already has Android 2.2 build UVKB5 already installed on it."
Does this mean 2.2 is required to install the CWM Recovery?
Thank you.
I'm not sure how you don't have CWM recovery if you followed the guide as it is written. Maybe its because the 2.1 is updated? I would do the following and see if that's all it takes. You definitely don't want to update to stock 2.2 via Kies or anything of that nature.
Worst case scenario, we can have you Odin back to stock JFD. You'll be smooth sailing from there.
Search the forums and find the update.zip for CWM for our Vibrant.
Put that on the lowest level of your INTERNAL storage. Not your microsd card. For example f:\update.zip
Now go to your boring 4 option stock recovery and select reinstall packages. It will reboot to the same boring screen. Select reinstall packages again, and it will reboot into Clockwork Mod Recovery.
Let me know if that does anything for you. Also what version of stock recovery do you have?
Toast6977 said:
Search the forums and find the update.zip for CWM for our Vibrant.
Click to expand...
Click to collapse
Can pull that directly from my signature, if OP wants. (Only works on Eclair [JFD] build btw)
Also OP, You will have to have a ROM that you are going to want to flash saved on your Internal SD card. Jsut download it, put in a folder and follow the ROM OP's instructions. Since you are fresh and new, I would NOT suggest flashing anything of ICS or JB until you get the hang of things first.
Read, read and then read somemore. When it comes time to flash ICS or beyond, there is a guide in my signature. Good luck and make sure to hit Toast's "Thanks" button. He is a good asset to have around here.
Wow! I was hesitant to even check today, let it alone this early! Did not think that I would have two very useful replies waiting for me. Thanks guys, much appreciated!
I'll try the Odin thing out first before I even try to flash (you need root first before flashing, I'm assuming). Just out of curiosity, what is JFD and Odin? I'm still gonna try it out using the guides found here, but just curious.
EDIT: Damn, it worked like a charm! Now I have CWM. The mistake I made was that I only installed the Superuser/ROOT and not both. Gonna play with it for a bit now
I'm glad that your issue was solved
If you have any other questions/issues feel free to hit us up. We tend to lurk around these parts from time to time.
--you could now modify the title of this post to add [Solved] to the title or contact Oka1 and let him know it's case closed.--
Toast6977 said:
I'm glad that your issue was solved
If you have any other questions/issues feel free to hit us up. We tend to lurk around these parts from time to time.
--you could now modify the title of this post to add [Solved] to the title or contact Oka1 and let him know it's case closed.--
Click to expand...
Click to collapse
Thank you for teaching me the etiquette around here as well

[Q] JFLEATT MDL to NJ4

Greetings, what is the best way for me to take my JFLEATT from MDL to NJ4?
I've not yet put a SIM or SDHC in the phone. It's been connected to my PC to run Casual and to a Wi-Fi network to install the TWRP Manager from the Play store. I also updated TWRP to 2.8.4.0 (after first updating to 2.8.5.0 and experiencing the dead recovery discussed here). I've just wiped the phone and made a compressed, non-encrypted backup of all the filesystems for disaster recovery purposes.
I've performed steps 1-5a in this awesome topic.
Is it true, can I just flash stock/rooted/custom ROMs through TWRP?
Although it's probably right in front of me, I can't seem to find a stock/rooted NJ4 ROM to use with TWRP. A recommendation would be very much appreciated.
So what do I do next to get from MDL to NJ4?
.
xpanmanx said:
Greetings, what is the best way for me to take my JFLEATT from MDL to NJ4?
I've not yet put a SIM or SDHC in the phone. It's been connected to my PC to run Casual and to a Wi-Fi network to install the TWRP Manager from the Play store. I also updated TWRP to 2.8.4.0 (after first updating to 2.8.5.0 and experiencing the dead recovery discussed here). I've just wiped the phone and made a compressed, non-encrypted backup of all the filesystems for disaster recovery purposes.
I checked out this awesome topic. I think step 5B, near the bottom of the OP, applies to me. .......is it true, can I just flash stock/rooted/custom ROMs through TWRP?
Although it's probably right in front of me, I can't seem to find a stock/rooted NJ4 ROM to use with TWRP.
What do I do next to get from MDL to NJ4?
.
Click to expand...
Click to collapse
If your bootloader is MDL and you take the NJ4 update you will be locked and forced to use safestrap recovery. If you are MDL you are one of the few lucky ones remaining with the options to flash a lot of custom roms using TWRP. Don't upgrade would be my suggestion. You can find great TW roms without upgrading.
Thanks
What do I need to watch for to make sure I don't lock the bootloader?
I want the KK/Sammy stock experience, rooted. I'm thinking Goldeneye is a good place to start.
With much respect to iB4STiD and his users, I might like to try something tighter to stock. Is there a popular TWRP-flashable ROM which could get me there?
.
xpanmanx said:
Thanks
What do I need to watch for to make sure I don't lock the bootloader?
I want the KK/Sammy stock experience, rooted. I'm thinking Goldeneye is a good place to start.
With much respect to iB4STiD and his users, I might like to try something tighter to stock. Is there a popular TWRP-flashable ROM which could get me there?
.
Click to expand...
Click to collapse
Follow the instructions in the thread you mentioned. They apply to your device. Specifically the FIRST post.
http://forum.xda-developers.com/showpost.php?p=42320391&postcount=1
Once that's done report back to us. Some parts might be out of date, in that case just do a quick search around the forum. Your want to get the latest version of TWRP flashed into recovery for example.
NighthawkXL said:
Follow the instructions in the thread you mentioned.
Click to expand...
Click to collapse
Thanks, I've done that already, through step 5a.
(I see how my OP could be confusing on that point; I've gone back and edited it for clarity.)
Are there any other recommendations for a KK/Sammy stock/rooted experience that can be flashed from TWRP? Goldeneye looks great, I'm just trying to learn of others.
.
xpanmanx said:
Thanks, I've done that already, through step 5a.
(I see how my OP could be confusing on that point; I've gone back and edited it for clarity.)
Are there any other recommendations for a KK/Sammy stock/rooted experience that can be flashed from TWRP? Goldeneye looks great, I'm just trying to learn of others.
.
Click to expand...
Click to collapse
Your set then, you already have a Nandroid.
Grab a ROM, put it on your external SD card, reboot into TWRP, wipe the device, and flash the ROM, kernels, etc. ~ Most ROM's your find in the subforums around here are already have been loki-doki'ed so you shouldn't be over worried about. Besides, most ROM threads will mention in the first post if they are already loki patched. Enjoy your "unlocked" S4, you lucky person ^^

Need Beginner's Guide, so Custom Rom can be installed

***UPDATE***
Thanks to reply, I have now successfully done everything I set out to do, and created follow-up guide!
You can find it HERE
Original Post below:
Hello Everyone!
I'd like to start off saying I used to have a Nexus 4, with TWRP and Lollipop-based CyanogenMod. I was able to install this all by myself, and keep both TWRP and the ROM updated. I also flashed custom radio to unlock the LTE capability on that phone. My tool of choice to help customize the phone was Nexus Root toolkit.
I was able to follow guides posted long ago on these forums, to do what I wanted with the Nexus 4 back in 2013/2014, but it seems I'm not so capable these days. I've hit such a roadblock with lack of root and constant stutters/slowdowns with everyday use on my current device, the Axon 7, that I must get away from the stock software. I heard it was not so easy with other devices, and while a few devs have posted wonderful guides for users, it's just not enough for a true beginner like me. From skimming guides posted, it seems like devs already expect you to have installed custom recovery, or unlocked bootloader. Then when I try to do these things, so I can move onto custom ROM, it seems the guides are out of date or just not step-by-step enough for me to use, and I don't want to take a risk and brick my device trying things that I'm not sure about. I'm a power user through and through, but not so up-to-date or knowledgeable enough to be able to follow the guides already on the forums. Consider me 1 out of 5 on tech level for Android software.
Here's the model/software already on my device: Stock everything, from bootloader and recovery, to ROM.
Model: A2017U, Nougat 7.0 on B15 ROM
What I still need clarification on:
with my device already running on nougat, do I need to install the nougat universal bootloader/radio I saw in earlier guides?
will LineageOS have any downgrades in regard to audio quality, on either the headphone output or speakers?
will my ROM of choice have Daydream VR support? if not what would be needed?
this is not a big deal, but do I need a special app or entire custom ROM if I'm interested in a temporary unroot to use apps like Android Pay?
Here's what I want on my device: TWRP, LineageOS with root.
If anyone, expert users and devs alike, could reply with current known-good info about the following, I and a lot of other users would be eternally grateful:
unlocking the bootloader, installing TWRP, and LineageOS, in a stupidly long but simple step-by-step process.
Quick follow-up info:
What I can do so far: download current LineageOS nightly, correct version of root .zip, and TWRP from official websites
NO, I'm not good with using ADB on Windows to get things done. I had to ask a friend to help me install it on windows, the guide he sent was much easier than the one i was using, and he still had to walk me through how to use it once installed to help me unlock bootloader/root on another device, Zenphone Zoom if anyone is interested.
PLEASE, don't link me to other guides for any part of this process, if the steps are thorough and relevant, please copy here, of course with all due credit given to original poster.
Feel free to let me know if more info about my knowledge level or device is needed to help you work on my request.
Thanks for reading, here's to several years more of everyone enjoying this wonderful device!
ok there is three real steps, but it can be aheadache, mainly because you didn't unlock before going to nougat.
Step 1. Downgrade to B29 Marshmallow - go here https://www.zteusa.com/axon-7/ and on the support tab in software updates is a full B29 software package. Download it, unzip it once, then put the update.zip file on your SD card.
- on the phone, in developers options, turn on OEM unlocking (it is needed to flash from sd card)
- boot phone to recovery, choose update from sd card, pick the update.zip from the sdcard, the phone will flash the B29 software. It is a bit slow, let it do what it needs to do.
Step 2. Unlock phone and install TWRP - go here https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514 download the miflash program, fastboot unlock program, and twrp for B29.
- instructions are all there, just do what it says.
Step 3, Install LineageOS - https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-14-1-zte-axon-7-t3545679 very straight forward. Don't forget to install first the bootloader, then the rom, then gapps.
What makes this so hard is not being easily able to unlock in nougat. Most of us here unlocked way before marshmallow
No need to downgrade to b29.
lafester said:
No need to downgrade to b29.
Click to expand...
Click to collapse
I was thinking this too. Should be as simple as the steps below
1) Flash signed twrp using axonroot tool - this pry's open the door
2) Using twrp, flash fastboot (b20_fbop or something?) - opens door wider
3) Enable usb debugging and oem unlocking in developer options
4) reboot to fastboot/bootloader mode
5) fastboot oem unlock - door is now wide open
Done.
gpz1100 said:
I was thinking this too. Should be as simple as the steps below
1) Flash signed twrp using axonroot tool - this pry's open the door
2) Using twrp, flash fastboot (b20_fbop or something?) - opens door wider
3) Enable usb debugging and oem unlocking in developer options
4) reboot to fastboot/bootloader mode
5) fastboot oem unlock - door is now wide open
Done.
Click to expand...
Click to collapse
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Help needed
I followed the instructions and is apparently in a boot loop. Initially it was working but now it is not. I can't even wipe the device to start from scratch. Is there another ROM available to try?
kingoftheafro said:
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Click to expand...
Click to collapse
This is exactly the reason I made my post, I need concrete answers not guesses. Glad to see someone else needs the same answers
kaiso said:
I followed the instructions and is apparently in a boot loop. Initially it was working but now it is not. I can't even wipe the device to start from scratch. Is there another ROM available to try?
Click to expand...
Click to collapse
Did you downgrade to Marshmallow B29 first or skip this step?
[email protected] said:
This is exactly the reason I made my post, I need concrete answers not guesses. Glad to see someone else needs the same answers
Click to expand...
Click to collapse
I'm praying that someone will compile the information spread about into 3 guides that are model specific so people like us won't rack our heads trying to figure out what on earth to do.
[email protected] said:
Hello Everyone!
Model: A2017U, Nougat 7.0 on B15 ROM
What I still need clarification on:
1with my device already running on nougat, do I need to install the nougat universal bootloader/radio I saw in earlier guides?
2will LineageOS have any downgrades in regard to audio quality, on either the headphone output or speakers?
3will my ROM of choice have Daydream VR support? if not what would be needed?
4this is not a big deal, but do I need a special app or entire custom ROM if I'm interested in a temporary unroot to use apps like Android Pay?
Here's what I want on my device: TWRP, LineageOS with root.
If anyone, expert users and devs alike, could reply with current known-good info about the following, I and a lot of other users would be eternally grateful:
unlocking the bootloader, installing TWRP, and LineageOS, in a stupidly long but simple step-by-step process.
Quick follow-up info:
What I can do so far: download current LineageOS nightly, correct version of root .zip, and TWRP from official websites
5NO, I'm not good with using ADB on Windows to get things done. I had to ask a friend to help me install it on windows, the guide he sent was much easier than the one i was using, and he still had to walk me through
Click to expand...
Click to collapse
Ok, I've edited your post to clear some of the clutter and numbered everything so I can answer everything.
1. No, bootloader updates are only for users who haven't updated to B15 (through official means)
2. Only audio issues are with the front facing speakers. The way they sound is if you turn them up to 100% and then push it even higher to like 140%. So if you keep it at about 71% they sound normal. Check this guide here to get even better quality on overall sound (headphones, speakers)
3.B15 and LOS both work with Daydream. I currently use LOS with my Daydream headset currently.
4.Magisk with this kernel here. Currently have fully functioning Android Pay with LOS.
5. This is a big problem. If you're not comfortable with ADB you should maybe rethink messing with this phone. EDL mode (which is how I flash TWRP and subsequently the B20 bootloader to unlock) is very similar to ADB and the tools needed to flash in EDL can brick your device. Learning how to use ADB isn't bad but it's good as a fallback so you're not relying on strangers to help you out in a pinch (which most will, I just like having the ability to do things mostly myself).
---------- Post added at 10:05 AM ---------- Previous post was at 09:55 AM ----------
nolimit78 said:
I'll keep on saying this as much as I need to, I get where you're coming from. There's a lot of data about the correct way of doing things. Best thing to do is read and search. When I got my phone B29 was the new hotness and there was a bunch of older data floating around that I had to sift through. But I did it, I sifted and found my own way and combined two different methods to get my phone rooted and flashed with LOS. Honestly, the trial and error, the searching, the sifting is totally worthwhile because while this device is /DIFFERENT/ compared to methods for HTC and Samsung products, it's not harder. It's better to get yourself properly antiquated to the device you plan on flashing/hacking/rooting because there is /always/ a chance for bricking. Then another thread will be created asking for help to unbrick. Take the time, read now, read everything, understand your device, then push forward.
Click to expand...
Click to collapse
I quoted this because this thread is like the third I've seen in the last couple days. But to offer some help, this is the guide that I've followed with two phones one running B29 stock and one running B15 Stock. It remains the same because of the use of EDL. It's also good in case you want to go back to complete stock (which at the time was speculated would brick your device) but I read between the lines and discovered that it's just not a big deal. Once you get TWRP installed, make sure your Data partition is EXT4, flash LOS, flash GApps and you're good to go.
The hardest part of the process, is getting your drivers to be recognized properly for the EDL flashing tool to work. Anti-Virus softwares tend to throw false positives with tools like the EDL Flashing tool. I installed a fresh copy of Windows 7 JUST to have a flashing station ready JIC. Once I did that, smooth sailing.
nolimit78 said:
Ok, I've edited your post to clear some of the clutter and numbered everything so I can answer everything.
1. No, bootloader updates are only for users who haven't updated to B15 (through official means)
2. Only audio issues are with the front facing speakers. The way they sound is if you turn them up to 100% and then push it even higher to like 140%. So if you keep it at about 71% they sound normal. Check this guide here to get even better quality on overall sound (headphones, speakers)
3.B15 and LOS both work with Daydream. I currently use LOS with my Daydream headset currently.
4.Magisk with this kernel here. Currently have fully functioning Android Pay with LOS.
5. This is a big problem. If you're not comfortable with ADB you should maybe rethink messing with this phone. EDL mode (which is how I flash TWRP and subsequently the B20 bootloader to unlock) is very similar to ADB and the tools needed to flash in EDL can brick your device. Learning how to use ADB isn't bad but it's good as a fallback so you're not relying on strangers to help you out in a pinch (which most will, I just like having the ability to do things mostly myself).
---------- Post added at 10:05 AM ---------- Previous post was at 09:55 AM ----------
I quoted this because this thread is like the third I've seen in the last couple days. But to offer some help, this is the guide that I've followed with two phones one running B29 stock and one running B15 Stock. It remains the same because of the use of EDL. It's also good in case you want to go back to complete stock (which at the time was speculated would brick your device) but I read between the lines and discovered that it's just not a big deal. Once you get TWRP installed, make sure your Data partition is EXT4, flash LOS, flash GApps and you're good to go.
The hardest part of the process, is getting your drivers to be recognized properly for the EDL flashing tool to work. Anti-Virus softwares tend to throw false positives with tools like the EDL Flashing tool. I installed a fresh copy of Windows 7 JUST to have a flashing station ready JIC. Once I did that, smooth sailing.
Click to expand...
Click to collapse
I've already used EDL mode from that page to put a fresh copy of stock nougat to, among other things, reduce the potential issues upgrading causes. So all I should have to do is flash B15-NEW_TWRP (Nougat) from that page and then fastboot unlock?
from there reset data/cache, flash custom ROM.
flash gapps
reboot, install apps.
?????
KyJelly69 said:
I've already used EDL mode from that page to put a fresh copy of stock nougat to, among other things, reduce the potential issues upgrading causes. So all I should have to do is flash B15-NEW_TWRP (Nougat) from that page and then fastboot unlock?
from there reset data/cache, flash custom ROM.
flash gapps
reboot, install apps.
?????
Click to expand...
Click to collapse
Yup.
kingoftheafro said:
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Click to expand...
Click to collapse
In case you still need all this, I made a new guide after successfully doing everything:
https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128
[email protected] said:
In case you still need all this, I made a new guide after successfully doing everything:
https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128
Click to expand...
Click to collapse
Thank you for the guide, but I managed to get everything done without having to downagrade from Nougat. I was having issues with my Windows variant recognizing my phone after drivers were installed so I used Linux Mint 18.1 and everything went smooth as a whistle. I think the mods should pin your thread post.
I followed the rootjunkie YouTube videos, worked perfectly and the files were all available.
Sent from my ZTE A2017U using Tapatalk

Question I've tried so hard and got so far.

Hi, I've been struggling big time to update my device to Android 13. I bought mine when only 1.1.7 hotfix was out and therefore, now that I have unlocked the bootloader (yes, even unlock critical) and rooted the device, I'm not able to install 1.1.8, let alone Android 13. I have already bricked one and managed to get a new one but I don't want to risk it again. I've searched all over Google to a proper guide to update to Android 13, even with sideload, but it gives me an error regarding the payload file, at about 48% of the progress. Tried the *#*#682#*#* method but it stops with error code 20. I have tried flashing the stock boot file but same thing, code 20 from manual update. I'm pretty much desperate at this point and I'm even thinking about unrooting, lock the bootloader again and hopefully update it without an itch, but I really wouldn't want to wipe the device, so, if there's somebody there that could help me through a 100% working process, I'll always be in your debt.
Enzucuni said:
Hi, I've been struggling big time to update my device to Android 13. I bought mine when only 1.1.7 hotfix was out and therefore, now that I have unlocked the bootloader (yes, even unlock critical) and rooted the device, I'm not able to install 1.1.8, let alone Android 13. I have already bricked one and managed to get a new one but I don't want to risk it again. I've searched all over Google to a proper guide to update to Android 13, even with sideload, but it gives me an error regarding the payload file, at about 48% of the progress. Tried the *#*#682#*#* method but it stops with error code 20. I have tried flashing the stock boot file but same thing, code 20 from manual update. I'm pretty much desperate at this point and I'm even thinking about unrooting, lock the bootloader again and hopefully update it without an itch, but I really wouldn't want to wipe the device, so, if there's somebody there that could help me through a 100% working process, I'll always be in your debt.
Click to expand...
Click to collapse
The best part of this whole thing is that you're rooted.
Do a backup with Swift Backup or what ever your backup app you prefer. Wipe it back to stock without locking the bootloader, make sure your sim card is not inserted then do your OTA updates.
As for the second device you bricked, there's a unbrick tool here:
unbrick tool- EDL Flash-Read-Repair Region Change tool
unbrick tool Now available for Nothing Phone1.. Features: Read Firmware (EDL) (locked bootloader) Flash Firmware (EDL) (locked bootloader) backup EFS (EDL) (locked bootloader) Wipe FRP & userdata (EDL) (locked bootloader) Size: 2.7GB Version...
forum.xda-developers.com
Just need to get or make a EDL cable then flash and you'll be back in business.
HermitDash said:
The best part of this whole thing is that you're rooted.
Do a backup with Swift Backup or what ever your backup app you prefer. Wipe it back to stock without locking the bootloader, make sure your sim card is not inserted then do your OTA updates.
As for the second device you bricked, there's a unbrick tool here:
unbrick tool- EDL Flash-Read-Repair Region Change tool
unbrick tool Now available for Nothing Phone1.. Features: Read Firmware (EDL) (locked bootloader) Flash Firmware (EDL) (locked bootloader) backup EFS (EDL) (locked bootloader) Wipe FRP & userdata (EDL) (locked bootloader) Size: 2.7GB Version...
forum.xda-developers.com
Just need to get or make a EDL cable then flash and you'll be back in business.
Click to expand...
Click to collapse
First bricked device was replaced in RMA. But yeah, rooted, unlocked and yet nothing works. I was thinking about wiping it, even if I don't really want to because it's a pain every time. Man, Android modding when to ****e and I'm leaning more and more towards getting an iPhone and call it a day, maybe with a jailbreak
Enzucuni said:
First bricked device was replaced in RMA. But yeah, rooted, unlocked and yet nothing works. I was thinking about wiping it, even if I don't really want to because it's a pain every time. Man, Android modding when to ****e and I'm leaning more and more towards getting an iPhone and call it a day, maybe with a jailbreak
Click to expand...
Click to collapse
Swift does their backups well so from wipe to setup depending on how many apps ya got took like 20 mins to do?
Once you get to A13 tho, my god the battery life is amazing. I don't use my NP1 as a daily driver but it sits in my pocket along with my daily OP7Pro and it out lasts it by a mile. Really hyped for the NP2 and what they bring optimization wise.
Or in your case you could carry both and see how you feel about it xD
Oh and it's likely the patched boot image (while rooted) that's causing the update errors. Once you restore the stock boot image you should be able to update without issue.
HermitDash said:
Swift does their backups well so from wipe to setup depending on how many apps ya got took like 20 mins to do?
Once you get to A13 tho, my god the battery life is amazing. I don't use my NP1 as a daily driver but it sits in my pocket along with my daily OP7Pro and it out lasts it by a mile. Really hyped for the NP2 and what they bring optimization wise.
Or in your case you could carry both and see how you feel about it xD
Oh and it's likely the patched boot image (while rooted) that's causing the update errors. Once you restore the stock boot image you should be able to update without issue.
Click to expand...
Click to collapse
I actually restored it but to no avail. Same errors as described
Enzucuni said:
I actually restored it but to no avail. Same errors as described
Click to expand...
Click to collapse
Welp, back to stock you go then haha ADB it to EDL then run the unbrick tool and you should be at 0
I might be actually lazy enough to wait for a hint of a custom twrp-like recovery and go from there
Enzucuni said:
I might be actually lazy enough to wait for a hint of a custom twrp-like recovery and go from there
Click to expand...
Click to collapse
Might not be stable on first release but yea that's in the rumor pipelines
Yeah, I think I'll wait. A12 is still really nice. Some bugs here and there but perfectly usable and battery is basically infinite.
First of all, to jailbreak the iPhone and set it up correctly with all the needed software that jailbreaking provides nowdays ... is actually harder than it was a few years ago.
Secondly, if you had just read through the full topic containing the Nothing OS repo, you would have found several people with the same problem that u had, who had solved it successfully.
Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm. if you want to jailbreak. First, read through the posts of others to see if there are any problems that you would like to avoid, and if there are, don't do it.
You are lucky enough to have had your first device replaced by a new one just like that. Updating while rooted was always a problem for Android, and it always varied per device. it was up to the one who is rooting to check the situation regarding his/her specific model
You could try flashing the fastboot ROMs made by @ot_inc (it's not 100% safe for your data so make a backup in any case).
[Restore NothingOS & Magisk] Nothing Phone(1) Fastboot ROM(Full ROM) & boot.img Global v1.1.6
Fastboot ROM and boot.img for NothingPhone(1) are now available. v1.1.6 is available. Sorry for my poor English, I'm Japanese. https://reindex-ot.github.io/
forum.xda-developers.com
kriistofor said:
First of all, to jailbreak the iPhone and set it up correctly with all the needed software that jailbreaking provides nowdays ... is actually harder than it was a few years ago.
Secondly, if you had just read through the full topic containing the Nothing OS repo, you would have found several people with the same problem that u had, who had solved it successfully.
Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm. if you want to jailbreak. First, read through the posts of others to see if there are any problems that you would like to avoid, and if there are, don't do it.
You are lucky enough to have had your first device replaced by a new one just like that. Updating while rooted was always a problem for Android, and it always varied per device. it was up to the one who is rooting to check the situation regarding his/her specific model
Click to expand...
Click to collapse
Where is the step by step ? The one that actually works ?
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
kriistofor said:
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
Click to expand...
Click to collapse
Umm.. no, you're not sounding harsh. And I've already done that: "google it" and stuff. This is why I post teh question here. This is not my first time at this lol !
kriistofor said:
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
Click to expand...
Click to collapse
You said, "Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm."
Where are you getting this from ?

Categories

Resources