Stuck with Fastboot, DFU and locked bootloader - ZTE Axon 7 Questions & Answers

Hello, I am totally lost... I've been trying to solve this problem for 2 weeks... I relocked my bootloader by mistake. Since that day, I can only access : fastboot and DFU mode.
It seems I can flash recovery with fastboot, but the phone never boots into recovery (stuck on ZTE logo).
I've tried to put my device in EDL mode with DeepFlash cable but without success so far... Is there any solution to my problem (without tearing down my device).
Thanks

Which recovery did you flash? tenfar's signed one? Did you try stock recovery?
When stuck in ZTE logo, is 'adb devices' command recognized? What does your phone appear in Windows device manager?
Edit:
Also in fastboot mode, "fastboot devices" command did work I assume?
Maybe in last resort you can try to unlock back: "fastboot oem unlock" ?

evenshop said:
Hello, I am totally lost... I've been trying to solve this problem for 2 weeks... I relocked my bootloader by mistake. Since that day, I can only access : fastboot and DFU mode.
It seems I can flash recovery with fastboot, but the phone never boots into recovery (stuck on ZTE logo).
I've tried to put my device in EDL mode with DeepFlash cable but without success so far... Is there any solution to my problem (without tearing down my device).
Thanks
Click to expand...
Click to collapse
Maybe the problem is no-verify? I have no idea how you can flash that since you would do that from TWRP, but it might be the problem. Try to read some guides to see if that's the problem

dnlilas said:
Which recovery did you flash? tenfar's signed one? Did you try stock recovery?
When stuck in ZTE logo, is 'adb devices' command recognized? What does your phone appear in Windows device manager?
Edit:
Also in fastboot mode, "fastboot devices" command did work I assume?
Maybe in last resort you can try to unlock back: "fastboot oem unlock" ?
Click to expand...
Click to collapse
I tried stock and tenfar. The flashing is ok but it doesnt' boot. When I type "fastboot oem unlock" it says "not allowed".
It is either recognized in DFU mode or QUSB__BULK but Axon7tool is not able to communicate with the device....

i have same problem, i try search but no luck, any one can help us plz.

t.zennad said:
i have same problem, i try search but no luck, any one can help us plz.
Click to expand...
Click to collapse
Well I don't know what you searched, but there are 2 guides around. Use my DFU unbrick guide. Yes it involves taking the phone apart
May I ask, how did you relock? Was it via axon7toolkit?

No, I just use command fastboot oem lock
---------- Post added at 01:49 AM ---------- Previous post was at 01:46 AM ----------
If there is any solution you can provide me, please
Thanks

t.zennad said:
No, I just use command fastboot oem lock
---------- Post added at 01:49 AM ---------- Previous post was at 01:46 AM ----------
If there is any solution you can provide me, please
Thanks
Click to expand...
Click to collapse
I provided a solution to you right there. Find my DFU unbrick guide on the Guides section, it's called DFU unbrick...

Choose an username... said:
I provided a solution to you right there. Find my DFU unbrick guide on the Guides section, it's called DFU unbrick...
Click to expand...
Click to collapse
there is no solution without open mobile.
thanks

t.zennad said:
there is no solution without open mobile.
thanks
Click to expand...
Click to collapse
Well I assumed that you tried other things.
Do you have an A2017G? Are you sure that you have a DFU brick? Did you try any of the other methods to get to EDL?

I have b2017g, I lock bootloader then stuck in zte logo an reboot, only when I press volume up and down enter to fastboot mode I try to unlock I got massage not allowed

t.zennad said:
I have b2017g, I lock bootloader then stuck in zte logo an reboot, only when I press volume up and down enter to fastboot mode I try to unlock I got massage not allowed
Click to expand...
Click to collapse
Then why are you on the Axon 7 section?? Only use Axon 7 mini guides or you'll brick your phone much more
The Mini may not even have the test point on the same place. I don't know if there are miflash packages for it. I can't help you, ask someone on that section, not here
Edit: I think I might be able to help you though. Find a TWRP made for the axon 7 mini, no idea which is the name. Then use 'fastboot boot' with it. You will have TWRP but a locked bootloader. Ask someone over the axon 7 mini section whether they have aby ideas.

Related

Messed things up with upgrade/downgrade?

My wife got a P9 Lite L31. I wanted to upgrade to Nougat. I finally succeeded, but after that I messed things up. I tried to do a clean intall with a update that wasn't ment for this.
In the beginning I could still enter the Nougat recovery, but I wasn't able to reinstall the update.zip. The device wouldn't boot, etc.
I tried to do many different things, but at this moment I cant enter TWRP anymore, I can enter fastboot and is says:
PHONE Unlocked
FRP Unlocked
But flashing an other TWRP recovery doesn's work because I get an error:
(Remote: Command not allowed).
Also relocking the bootloader doesn't work because is gives the same error as the one above.
I can't flash a OEM file through fastboot because it gives the same error as the one above.
I can't use HiSuite because it says it does not support the phone.
I don't know what else I can do right now.
I tried the 3 button method, but I can't get in the official recovery. The phone reboots to some kind of recovery where it wants to update the recovery through wifi, but it ends up with an error that it can't fails to get the package info. But there is no option to do a factory reset (I've put the MM update.app file in sdcard/dload folder).
Any ideas what else I can do to recover the phone?
Unlock the bootloader again.
Johnny TDN said:
Unlock the bootloader again.
Click to expand...
Click to collapse
Ok, did not expect to do that again, but I did it.
What's the next step? flash a nougat recovery? flash a oem recovery?
Fastboot now says:
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed)
Looks like fastboot isn't recognized by the computer anymore after the re-unlocking of the bootloader.
Windows device management also doesn't see the device. Not even as an unknown device.... Looks like the bootloader unlock completely bricked the device.
Well.
You must change your motherboard.
Johnny TDN said:
Well.
You must change your motherboard.
Click to expand...
Click to collapse
As per usual, your comment was of no help at all.
Take a look to this thread, it seems similar to your problem https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872
What are you able to do with the phone?
igreja94 said:
As per usual, your comment was of no help at all.
Click to expand...
Click to collapse
-_-
---------- Post added at 09:02 AM ---------- Previous post was at 09:00 AM ----------
Try to discharge your battery by leaving it on Fastboot mode.
Charget the batery and let it boot itself.
If it boots in the software, it will be very easy to fix. If no, then changing the motherboard is required
Potato997 said:
Take a look to this thread, it seems similar to your problem https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872
What are you able to do with the phone?
Click to expand...
Click to collapse
To be honest, nothing.
It can do two things, you can let it boot and then it says it's booting, and that's it (after the warning that the bootloader is unlocked), or I can boot into fastboot but the phone is not detected by the computer. Device manager doesn't see the device at all not even as an unknown device. Nothing. So no way to flash anything using fastboot. KI also can't get into the fastboot&repair.
So yeah, I decided to send it in for repair.

Bootloader unlock and custom recovery

Hello guys. Before you proceed, I'll let you know that I don't own this device. Theoretically these steps should work.
1. Unlock bootloader
Go to settings>about, tap build number 7 times. This enables developer options. Here, select allow OEM unlock and USB debugging. Reboot in fastboot mode (power+vol down). Then go to this site
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
And follow the instructions. They are pretty straightforward.
2. Install TWRP
Go to
http://lenovo-forums.ru/topic/22535-moto-m-kastomnoe-rekaveri-twrp-otklyuchenie-shifrovaniya/
And download TWRP_Moto_M.img and boot_M_S124.img
In fastboot mode type fastboot flash boot <the name of the latter file image, just drag it into the CMD window from adb and fastboot folder> then type fastboot flash recovery <TWRP file>
Then type fastboot boot <TWRP file> and voila, you are booted in custom recovery.
IMPORTANT: FOR ALL THAT IS GOOD AND FAIR, MAKE A BACKUP OF EVERY FOLDER. IF YOU MESS UP SOMEWHERE, I WON'T BE ABLE TO HELP YOU!!
Now you may proceed to rooting procedures.
Tell me if this works. And before asking any questions in this thread, use the DAMN INTERNET; Google or Bing or Yahoo, whatever floats your boat
Reserved
If you are unsure of any step, and Google does not help, ask it in this thread and wait for my reply
Hi can u pls tell how to do this in XT 1663... Tried to enter bootloader mode but no luck
nanchilanto said:
Hi can u pls tell how to do this in XT 1663... Tried to enter bootloader mode but no luck
Click to expand...
Click to collapse
Search in google `lenovo forum 772 moto m`
jcanilkumarjc said:
Search in google `lenovo forum 772 moto m`
Click to expand...
Click to collapse
I tried tat but it boots normally only , OEM unlocking is switched on too , USB debugging is also turned on. Will give a shot connecting thrh PC . Anyways tnx for the response
Can we enable Mediatek Clear Motion feature in Moto M XT1663 ? Please kindly help me
Thanks!
If someone has been able to root the device successfully, do share with me the system and boot backup made in twrp. I will try bringing up a ROM.
For unlocking just enable it in developers and then
fastboot oem unlock
Guys, I'm I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
sreenivas134 said:
Guys, I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
Click to expand...
Click to collapse
I've flashed the stock ROM using sp flash tool. It has resolved the issue. Thanks...
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
sreenivas134 said:
Guys, I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
Click to expand...
Click to collapse
I've flashed stock ROM using sp flash tool. It has resolved the issue. Thanks...
sreenivas134 said:
I've flashed the stock ROM using sp flash tool. It has resolved the issue. Thanks...
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
I've flashed stock ROM using sp flash tool. It has resolved the issue. Thanks...
Click to expand...
Click to collapse
Can you pls gimme the download link and the steps to flash the stock firmware ? I updated to nougat and flashed the wrong version of boot.IMG and the phone stays at your phone will reboot in 5 seconds
nanchilanto said:
Can you pls gimme the download link and the steps to flash the stock firmware ? I updated to nougat and flashed the wrong version of boot.IMG and the phone stays at your phone will reboot in 5 seconds
Click to expand...
Click to collapse
You can find the stock firmware here!
https://mega.nz/#!fcoS2SII!ipO0YBudxaTnF7XVdqjEMwByJmn95p-K4A2mHrY-DvE
sreenivas134 said:
You can find the stock firmware here!
https://mega.nz/#!fcoS2SII!ipO0YBudxaTnF7XVdqjEMwByJmn95p-K4A2mHrY-DvE
Click to expand...
Click to collapse
Password ?????????????????????
Moto M - Unlock bootloader
mrinmaydhar said:
Hello guys. Before you proceed, I'll let you know that I don't own this device. Theoretically these steps should work.
1. Unlock bootloader
Go to settings>about, tap build number 7 times. This enables developer options. Here, select allow OEM unlock and USB debugging. Reboot in fastboot mode (power+vol down). Then go to this site
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
And follow the instructions. They are pretty straightforward
Click to expand...
Click to collapse
The wrong way to go.
Follow these steps:
In Windows command prompt write adb reboot bootloader. The device will reboot into fastboot.
The following command - fastboot oem unlock. You will be prompted on the phone screen, volume up to confirm, down to refuse. Who decided to change his mind
I waited a few seconds and at the command prompt, I got the answer - OK.
Disconnect the cable from the phone and hold the power button reboot the phone and put aside. He will restart another 2 times, will go to the drain recovery and erase all data from your phone. Therefore, I recommend to make a backup.
You just have to wait to boot the phone. approximately 5-7 minutes.
The bootloader is unlocked.
BOPOH'Ok said:
The wrong way to go.
Click to expand...
Click to collapse
So what's wrong with what I posted? Just wanted to know, so that I can update the OP.
mrinmaydhar said:
So what's wrong with what I posted? Just wanted to know, so that I can update the OP.
Click to expand...
Click to collapse
That's just the point, that you give the wrong information.
You give a link to the unlocking of MOTO devices on the Qualcomm processor, and that method is not suitable for MTK.
I also laid out 100% working instructions.
problem
bro i am unlocking the bootloader it boots to bootloader then it asks for yes to unlocking the bootloader in phone it says volume up to yes or volume down to NO i press volume but it automatically cancelled what to do man

My lenovo a6000 is hard bricked. PC not detecting it.

Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?
arnab8820 said:
Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?
Click to expand...
Click to collapse
Try qfil method
JovanSijacki said:
Try qfil method
Click to expand...
Click to collapse
Can you give the link please..... please note the phone is no longer detected in pc
arnab8820 said:
Can you give the link please..... please note the phone is no longer detected in pc
Click to expand...
Click to collapse
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.
I already have installed the drivers. Still not detected. Even the device manager does not show a device is connected
sasukay said:
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.
Click to expand...
Click to collapse
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.
arnab8820 said:
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.
Click to expand...
Click to collapse
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.
sasukay said:
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.
Click to expand...
Click to collapse
There is only one pcb in it. Changing the cable does not make a difference
One update. I can get into the fastboot mode. But the bootloader is locked. What to do?
arnab8820 said:
One update. I can get into the fastboot mode. But the bootloader is locked. What to do?
Click to expand...
Click to collapse
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"
arnab8820 said:
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"
Click to expand...
Click to collapse
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also​ try
Code:
fastboot boot recovery.img
Sometimes only this works which temporarily boots into the custom recovery.
sasukay said:
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also​ try
Sometimes only this works which temporarily boots into the custom recovery.
Click to expand...
Click to collapse
Ok friend i will post the results tonight
sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Tried the above method but no luck it gives an error: "unknown command or device is lock".
arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?
sasukay said:
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?
Click to expand...
Click to collapse
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed
arnab8820 said:
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed
Click to expand...
Click to collapse
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.
sasukay said:
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.
Click to expand...
Click to collapse
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.
arnab8820 said:
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.
Click to expand...
Click to collapse
Try fastboot oem unlock
arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
I think you are missing something (maybe).
The command is "fastboot flash recovery recovery.img"
If the recovery files name is twrp.img then command will be "fastboot flash recovery twrp.img".

Unlocked bootloader

Hey guys, I used the rootles tool for gcam and it got stuck at locking bootloader. Now my phone has camera 2api enabled but the bootloader is unlocked. How do I lock it.
mb145 said:
Hey guys, I used the rootles tool for gcam and it got stuck at locking bootloader. Now my phone has camera 2api enabled but the bootloader is unlocked. How do I lock it.
Click to expand...
Click to collapse
Boot your mi a1 in fastboot mode and then connect it to a computer. Open command and write fastboot oem lock, reboot your phone and it should be locked
Sly2031 said:
Boot your mi a1 in fastboot mode and then connect it to a computer. Open command and write fastboot oem lock, reboot your phone and it should be locked
Click to expand...
Click to collapse
I read some guides that say you need fastboot and adb. How do you get them. Also to boot in fastboot you need to hold power+volume down or something else?
Thank you for all the answers.
Check If camera 2 API Enabled or Not By downloading Manual Camera From Playstore .
If All Right Mean Camera 2 API Enabled .
If Camera 2 API Not present.
Just Remove Your ADB Fastboot Driver And Download latest Version Adb And Install It Manually.
Then install Camera 2 API With Gcame .
It will Lock Your Bootloader Without Any Issue
mb145 said:
I read some guides that say you need fastboot and adb. How do you get them. Also to boot in fastboot you need to hold power+volume down or something else?
Thank you for all the answers.
Click to expand...
Click to collapse
Sorry for taking so long to reply :s
Yeah, to boot in fastboot mode you have to hold power+volume down/up(depends which device u have)
After that os juts follow the steps I said before
---------- Post added at 12:51 AM ---------- Previous post was at 12:49 AM ----------
Sly2031 said:
Sorry for taking so long to reply :s
Yeah, to boot in fastboot mode you have to hold power+volume down/up(depends which device u have)
After that os juts follow the steps I said before
Click to expand...
Click to collapse
I need the latest adb drivers/usb drivers, u can download it from typing on Google, don't stress about that
After u download it, open command line and write "adb devices" if ur device show up follow the steps, if not, say something
Hi,
Someone could say me if fastboot oem off-mode-charge 0 (for power on the phone when it off and charger plug) work on this phone. I want to buy it but I need to know that before.
If someone can test it to help me, the reverse command is fastboot oem off-mode-charge 1 (and the phone charge without boot again).

cant unlock bootloader

Hey there,
so my problem is, that I just cant unlock my bootloader anymore.
I dont know what to do.
The phone just shows the xiamoi logo for one second and then black screen.
Only fastboot mode does work.
Cmd says remote: oem unlock is not allowed. YES I know that I havent activated developer settings but I cant, because I wiped the system and cant do anything. And how to flash stock rom, when I havent got bootloader permissions.
Qfil and so on doestn work either.
Please respond asap.
heya
only you need to change the partition, ONLY WORK IF YOU DONT ERASE THE 2 SYSTEM PARTITIONS (system_a and system_b), to make that you need to follow instructions:
1.- open CMD in platform tools
2.- in CMD type Fastboot getvar current-slot
3(1).-if the CMD say current-slot:_a you need to type Fastboot set_active b
3(2).-if the CMD say current-slot:_b you need to type Fastboot set_active a
4.- reboot the phone typing fastboot reboot, and Ready!!!
Moratilla3 said:
only you need to change the partition, ONLY WORK IF YOU DONT ERASE THE 2 SYSTEM PARTITIONS (system_a and system_b), to make that you need to follow instructions:
1.- open CMD in platform tools
2.- in CMD type Fastboot getvar current-slot
3(1).-if the CMD say current-slot:_a you need to type Fastboot set_active b
3(2).-if the CMD say current-slot:_b you need to type Fastboot set_active a
4.- reboot the phone typing fastboot reboot, and Ready!!!
Click to expand...
Click to collapse
thanks for your reply, I typed it and it said active slot a, I typed... set_active b ...
I restarted it and I got black screen again... the problem is I cant flash software on it because I cant unlock the bootloader
klapfi said:
Hey there,
so my problem is, that I just cant unlock my bootloader anymore.
I dont know what to do.
The phone just shows the xiamoi logo for one second and then black screen.
Only fastboot mode does work.
Cmd says remote: oem unlock is not allowed. YES I know that I havent activated developer settings but I cant, because I wiped the system and cant do anything. And how to flash stock rom, when I havent got bootloader permissions.
Qfil and so on doestn work either.
Please respond asap.
Click to expand...
Click to collapse
Go to: "Settings" -> "Developer options" oem option activate ?
klapfi said:
Hey there,
so my problem is, that I just cant unlock my bootloader anymore.
I dont know what to do.
The phone just shows the xiamoi logo for one second and then black screen.
Only fastboot mode does work.
Cmd says remote: oem unlock is not allowed. YES I know that I havent activated developer settings but I cant, because I wiped the system and cant do anything. And how to flash stock rom, when I havent got bootloader permissions.
Qfil and so on doestn work either.
Please respond asap.
Click to expand...
Click to collapse
Did you try Mi unlock?
http://en.miui.com/unlock/
You must create a mi account and need to use a chinese proxy to validate registration
I solved it myself. As mentioned I had no OS installed so there was no way to activate developer settings. I couldtn enter edl mode via fastboot so I used testpoint to solve my problem. I then flashed it via Miflash and the phone works now fine :good:
klapfi said:
I solved it myself. As mentioned I had no OS installed so there was no way to activate developer settings. I couldtn enter edl mode via fastboot so I used testpoint to solve my problem. I then flashed it via Miflash and the phone works now fine :good:
Click to expand...
Click to collapse
Before flashing a rom and rom custom is better know how to return to initial configuration
klapfi said:
I solved it myself. As mentioned I had no OS installed so there was no way to activate developer settings. I couldtn enter edl mode via fastboot so I used testpoint to solve my problem. I then flashed it via Miflash and the phone works now fine :good:
Click to expand...
Click to collapse
can you tell how to do testpoint?
Balasubramaniyan said:
can you tell how to do testpoint?
Click to expand...
Click to collapse
Just go on youtube and search for testpoint xiamoi mi a1, I did the same and it worked for me.
Good luck
If you can access Fastboot. THIS WILL ERASE ALL OF YOUR DATA
1. Enter Fastboot Mode > Make sure drivers are installed correctly
2. Enter "fastboot oem edl" > > Ignore Error > Your phone notification led should now blink.
3. Use MiFlash to flash the fastboot ROM.
klapfi said:
I solved it myself. As mentioned I had no OS installed so there was no way to activate developer settings. I couldtn enter edl mode via fastboot so I used testpoint to solve my problem. I then flashed it via Miflash and the phone works now fine :good:
Click to expand...
Click to collapse
Is there a way you could be more specific on what you do please? I don't understand what do you have to do after the testpoint, how do you use miflash to reflash the rom? Please
JFGR11 said:
Is there a way you could be more specific on what you do please? I don't understand what do you have to do after the testpoint, how do you use miflash to reflash the rom? Please
Click to expand...
Click to collapse
When your phone is in testmode you are able to flash stock firmware via Miflash. Download the stock firmware in the internet just google it.
You have to install Miflash. Open it connect phone in fastboot (testpoint). Then select the downloaded firmware in Miflash and flash it.
There are many videos on youtube how to flash with miflash.
Mi A1 show on PC screen failed ( OEM unlock is not allowed)
And not on my device
guys can we unlock bootloader from site : http://en.miui.com/unlock/ ? anybody tried that ?
burimi007 said:
guys can we unlock bootloader from site : http://en.miui.com/unlock/ ? anybody tried that ?
Click to expand...
Click to collapse
no, our device is android one, so bootloader only need a fastboot command and no code/waiting/program needed...
Help
klapfi said:
I solved it myself. As mentioned I had no OS installed so there was no way to activate developer settings. I couldtn enter edl mode via fastboot so I used testpoint to solve my problem. I then flashed it via Miflash and the phone works now fine :good:
Click to expand...
Click to collapse
hi bro your problem and i am the same as me now, and i read from this chat reply that you can finish via testpoint mode, then if you can know what windows you use 7 or 10, because on my windows does not show Qualcom 9008 driver, please help I

Categories

Resources