im new to this but here it goes i flashed g935aucu4bqa6_Recovery using odin 3.12 and it got my phone out of a bootloop but when it boots up it says installing system update then goes through erasing then it states no command so i press power and volume up to go into recovery then i press wipe catch then it reset it boots samsung and AT&T logo then says Device storage corrupt so i reboot back into recovery and i go to factory reset and it stops and says e:format_volume; make ext4 failed on /dev/block/bootdevice
is there anything i can do i even took it to bestbuy and the guy said it wont put the stock on there maybe cause its rooted i also tried to load stock back onto it and it failed with new cord and different usb ports
ANY HELP would be appreciated
Related
A client brought in her phone (S4-i337) that was in recovery mode, at first i thought it was something simple but not really. At first i did a wipe data but it couldn't boot up instead after rebooting, it went back to recovery mode. Surprisingly, this phone boots up normally when you try to boot to download mode. As in, when i press Volume down + Home + Power, instead of it going to download mode, it boots up fully then i happen to use it for until when I restart it. I've updated it to Android 5 using some file that i found on some forum, thought it would help but same case. Members, am out of ideas on what i should do. I've flashed it with Z3X box, but i also get an error, same as Odin. Any help is highly appreciated
What are you flashing to the phone? If it was running a stock 4.4.2 ROM or newer, the bootloader would be locked and AT&T never released a complete Odin firmware flash after 4.1.2.
Hi All,
Got a S5 G900I here that's doing my head in! Stuck in the infamous bootloop at the Samsung logo.
I have been a long time reader of these forums and have prior experience from flashing Samsung phones but this one is driving me mad!
I can put the phone into Download mode without an issue, phone is detected in Odin and I can flash any firmware I try to it (Have tried original 4.4.2 , 5.0 and latest 6.0.1 firmwares from SamMobile). Odin goes through the entire process, reports as "Pass" but then the device goes straight back into the reboot loop and will never fully boot up.
I can also use Odin to push TWRP / CWM / PhilzTouch recoveries, however the device will never boot into the recovery partition. I get the blue "Recovery Booting" message briefly, then the device bootloops again.
Does anyone have any further suggestions to try and get this phone operational again?
I have tried multiple versions of Odin, multiple firmware versions, different computers, different USB cables, different USB ports etc.
I look forward to hearing back from you
Try this :
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
andra.soul.catcher said:
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
Click to expand...
Click to collapse
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
AS93 said:
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
Click to expand...
Click to collapse
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
andra.soul.catcher said:
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
Click to expand...
Click to collapse
Thanks for the quick reply.
Yes when I am booting into recovery mode and can see the blue text "Recovery Booting" in the corner of the screen I let go of the power button - device still boot loops.
Have flashed recovery then removed battery - still cannot get it into recovery.
I have seen some Samsungs have hardware issues with their NAND chips but in these cases there are a lot of errors relating to NAND displayed on the screen when I've seen it be a hardware issue. None of these appear on this phone - convinced it has something to do with software.
I found these threads - exactly the same issue as me, and at the end it says they fixed it by flashing a specific bootloader however I have a G900I and the phone in this thread was a G900F
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926/
https://forum.xda-developers.com/galaxy-s5/help/samsung-s5-sm-g900f-stock-flash-caused-t3771105
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926
Have tried countless different versions of ODIN / recovery / stock firmware , including the "service firmware with the separate files G900IDVU1BOE1_CL4826466_QB4839040_REV00_user_low_ship_MULTI_CERT"
so i accidentally destroyed my efs partition on my Samsung and last baseband and all that in the process of trying to fix that i seem to have broken the bootloader or something so the phone just flashes on the samsung logo, when i try to flash stock firmware or anything other than twrp the flash fails and the phone shows this error: "an error has occurred while updating the device software. Use emergency function in the smart switch pc software." the phone isn't reconised in the smart switch software though so i cant try to fix it through that. im really not sure what to do at this point, does anyone have any ideas?
Update: i managed to find the latest firmware to flash (CRGB) however my phone gets stuck on the flashing samsung logo and idk what to do now. also my efs partition is broken is there a way i can fix that? (i dont have a backup)
can u boot to twrp?
khawarjaved said:
can u boot to twrp?
Click to expand...
Click to collapse
yes but i tried to flash stock everything including recovery and now twrp is gone and the phone boots to the s8 powered by android screen but then goes black and fails to boot. im not sure what to do now
if u can get to download mode ......flash twrp and when successfully flash reboot directly into recovery on first time ....as phone turns off after recovery is flashed immediately press power bixby and volume up....go to recovery wipe every thing including system etc...download a custom rom and move to phone via pc flash it and there you goo....any problems pm me
Hi All, This is my first post in a long time.....
I have flashed firmware with Odin for SM-G901F from Samobile and it seemed to have worked
but the phone is still stuck on downloading screen..
I have already tried to disconnect but it reverted to boot looping to recovery mode.
I have tried again and same result. I have left it connected in Odin.
Can anyone please advise what i should do next to boot phone correctly or if i may be missing something in the flash process etc... thanks... alcatron.
Try
1. Take the battery out, unplug USB
2. Hold Volume Up, Home, and Power, until see Android guy, the let go
3. Wipe data, Wipe cache
4. Reboot
so last night i decided to flash ÆON kernel on my h-rom s20 port and after flashing it and booting it was stuck at the boot logo so i tried going back to my recovery and it boot looped so i went in download mode and decided to flash twrp again but odin was stuck at setting up connection so i asked bout it in another place and they told me to flash stock rom so i tried that and it failed then i tried to reboot and instead of boot logo i saw this
"an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software."
so i did that and since it was custom rom suprise suprise it said unsupported device
all i need from this phone now is my data