Related
Hi, just bought an S5 G900F (international version)... and i wanted to install a custom recovery than root.. than flash rom. Im experienced in this matter... but ... im having all sorts of odd problems. I tried several reocvery (openrecovery, twrp, philztouch)... non stick when i reboot?
I tried several times... odin says everything installed fine.
I wanted to install cf-root... i did it win odin and when phone restarted it says: "recovery booting.... recovery is not seandoird enforcing ... set warranty bit : recovery
Who can help me??
PS Im on lollipop 5.0 if it makes any difference. All attempts were realized with different versions of odin
People have success with TWRP 2.8.7.0 and ODIN 3.10.6
Then SuperSU from TWRP if it sticks
http://forum.xda-developers.com/showthread.php?t=2727406
Tried no luck. I simply get the stock recovery all the time after restart
daniel_cassian said:
Tried no luck. I simply get the stock recovery all the time after restart
Click to expand...
Click to collapse
Try unchecking "Auto reboot" in ODIN, and once the flash has finished, pull the battery, replace and boot into recovery
just tried it... still no go (... do you think i would have more success trying from adb?
Lol this phone has smth against me.
Tried adb: as long as i have it in "desktop" mode adb devices finds it; as soon as i adb reboot bootloader, using the fastbootdevices... adb doesnt see it anymore... so i cant proceed to the flashig
I know you know what you're doing when it comes to this stuff, as you said
But just to make sure, can you post the exact step by steps you're using to try and flash CF Auto-Root and TWRP etc with ODIN?
Yes of course. As i doesn't work for me... i (even) hope im doing something wrong, so we can get to the bottom of this.
So, installed S5 drivers, Enabled usb debuggin in phone (dev menu). Put phone in dl mode (vl dwn+power+home), open odin, select at AP the recovery (tried about 3 recoveries, older versions and newer ones, twrp, phil, open). I have both (by default) checked auto reboot and f-reset time... connect phone with usb cables (tried 2) (connected directly to mb, no extension)... hit start... get the pass message.. phone resets... goes into android. I power off, go to recovery mode (vl up+power+home) and... i get the stock recovery every single time.
Tried something wierd... flashed through Odin CF-root first (with intention to flash after twrp ... as it says phone needs to be rooted first)... it flashes ok (odin says pass, successful 1), reboot (or go to recovery mode)... i get that seandroid error.
Tried to to with with apps from android as well... it doesnt let me.. obviously as most ask phone to be rooted.
What am I missing?
Those are the correct steps, it definitely should have flashed
Doing this from a native PC yes? Ive seen people trying it from Macs and it fails every time
Only thing I can think of right now is try using a different PC
You don't need USB debugging enabled for flashing with ODIN, download mode has no idea what settings you have enabled in Android
Like your method, I just do this:
Samsung Drivers (KIES3 installs them for you anyway)
Vol Down & Home & Power for Download Mode
Connect phone to PC USB
Leave ODIN defaults set (3.09 or 3.10.6)
Select CF-Auto-Root-klte-kltexx-smg900f.tar.md5 in AP/PDA section of ODIN
Wait for it to become ready
Hit start
Phone reboots, and I have root
You could try factory resetting the phone, and trying again, see if that does anything, or at least clear the caches from stock recovery first
Hi all,
I have a UK N910F 32GB Snapdragon Note 4, with a custom Lollipop rom that I've been using with no problems for a few months (http://forum.xda-developers.com/note-4/snapdragon-dev/rom-bob4-devbase-multi-csc-safe-bloat-t3033881). Yesterday the weirdness began - my Note 4 froze randomly in normal use and rebooted. It was then fine for around 5 hours, then froze again, and when it restarted it would continue to freeze on start-up. At that stage I could still boot into recovery (Clockwork Manager custom recovery), so I tried clearing cache and dalvik, which changed nothing. But now I am unable to do even that - it just gets stuck in bootloop and won't even go into recovery.
When I turn it on, it will stay on the Samsung splashscreen for 10 seconds, then reboot and vibrate twice, then go back onto splashscreen, reboots, etc. I need to remove the battery to stop this. The only thing I am able to do is boot into download mode, where the phone works with Odin fine, and I am able to flash successfully with Odin.
So far I have tried reflashing a stock UK 5.0.1 ROM - it initially gave me the ext4 error but I then got the N910F pit file and repartitioned - Odin flashing completed fine, then still got stuck on splashscreen with "Recovery booting...."). I have also tried to flash CWM and TWRP, which both flash fine, but then the phone still won't boot into recovery - I get:
#1 Battery in
#2 power on
#3 vibrate
#4 screen on RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
and doesn't boot into recovery. I'm pretty sure I'm using the correct TWRP and CWM versions.
I've spent all day trawling XDA and the wider web with no luck. Does anyone have any ideas on how to fix this? I'm hoping it is a softbrick but cannot work out how to get it back. I don't care about losing any data at this stage, just keen to bring my Note 4 back to life!
TL;DR: phone will stay on bootloop when powered on - not caused by failed software install, just started happening randomly. Cannot boot into recovery. Download mode works and can flash with Odin, but all attempted flashes so far haven't helped even when Odin succeeds in flashing.
Markachy said:
Download mode works and can flash with Odin, but all attempted flashes so far haven't helped even when Odin succeeds in flashing.
Click to expand...
Click to collapse
.
Have you tried flashing your variants cf-root file with auto reboot unchecked, let it Pass, remove USB abd battery, wait 30 seconds and reboot? Sounds weird.. i know, but for a while that put many users on 5.0.1 softbricks back to their previous working ROM.
I've just done that, it flashed successfully, I took battery and cable out and then rebooted after 30 seconds - it is now booting onto Samsung bootscreen, says:
RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Then reboots itself, same thing happens, reboots itself - back to a bootloop, but with the above written.
What's the fix for the above? Does it mean the recovery installed is wrong for the Android Rom version I have?
Thanks for your help so far, much appreciated.
Markachy said:
I've just done that, it flashed successfully, I took battery and cable out and then rebooted after 30 seconds - it is now booting onto Samsung bootscreen, says:
RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Then reboots itself, same thing happens, reboots itself - back to a bootloop, but with the above written.
What's the fix for the above? Does it mean the recovery installed is wrong for the Android Rom version I have?
Thanks for your help so far, much appreciated.
Click to expand...
Click to collapse
If you can still boot into the download mode and want to boot into the system as normal, using Samsung's Smart Switch tool will work. Search Google for "Samsung Smart Switch" no quotes, install the program then after finished installing, in the application, click MORE at the Smart Switch window, then click Emergency software recovery and initialization, then follow on-screen steps.
phongpan355 said:
If you can still boot into the download mode and want to boot into the system as normal, using Samsung's Smart Switch tool will work. Search Google for "Samsung Smart Switch" no quotes, install the program then after finished installing, in the application, click MORE at the Smart Switch window, then click Emergency software recovery and initialization, then follow on-screen steps.
Click to expand...
Click to collapse
Just tried that, same issue. When it boots after installation, it says "Recovery booting..." in top left corner, then goes into bootloop. Thanks for the tip though.
Any other ideas out on the grapevine? Or is it time for a return?
I'm having the same issue. Tried stock ANK4, BOB4 and BOC3. Only bootloops and can't reach recovery mode.
Than I tried TWRP 2.8.7.0 and "philz_touch_6.59.0-trlte" but they don't work either.
Don't know what to do now. Never had this issue before on any Samsung device
EDIT: Tried Samsung Smart Switch and it dowloaded PDA: OC3 / CSC: OB6 / PHONE: OC3 (DTM). But my Note bootloops furthermore
Saw 2 other guys with the same Problem and no solution here.
And I found this. This could be the same issue we are facing:
http://forum.xda-developers.com/showthread.php?t=1840030
Hope there is a dev that can make this for our 910F
Hi all
This is now also happening to me...
Have Odind back to stock and it works for about 4 hours,
Then issue starts...
Reboots randomly
Then reboots to blank screen... No recovery
Again uk note 4. 910f
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
What is the model number displayed in download mode?
Thanks a lot for your reply
It states:
PRODUCT NAME: GT-I9500
CURRENT BINARY: SAMSUNSG OFFICIAL
SYSTEM STATUS: Official
And in recovery mode it states Android Recovery Mode 3e
Any help is welcomed !
Make sure you're using the original cable, and move the cable to a different port if necessary. This is an Odin issue, not phone.
Thank you !
Tried with 2 different cables, will look for a third one.
Even if a see on the phone the "blue bar" that means download in progress, and Odin says OK, PASS, it can be the cable ?
Thanks a lot for your help
BTW if you know how to remove the Screen Lock password with the Stock Recovery, that sis welcomed as well
I have issues all the time with my S4 and often it just comes down to how I am pressing the buttons to get into other the boot download mode or the custom recovery rom. I swear I press them exactly at same time ,but then I do it differently and it works.
Also found cable / USB ports can affect it too. My home PC for some reason is terrible for using Odin, but then my laptop it works fine.
josecheja said:
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
Click to expand...
Click to collapse
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Lennyz1988 said:
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Click to expand...
Click to collapse
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
josecheja said:
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
Click to expand...
Click to collapse
Just hold the power on button until it reboots or remove battery.
Lennyz1988 said:
Just hold the power on button until it reboots or remove battery.
Click to expand...
Click to collapse
Lennyz1988
It worked !!!! thanks a lot Lennyz !!
Tried hundred times.....even unchecking the Autoreboot Option in Odin in past tries, but seems with the wrong Recovery version.
I am on TWRP recovery now !!!
Now let me see if I can run LockScreen_Security_bypass...the reason I needed Custom Recovery...)
Hello,
I´ve got a problem with my Samsung Galaxy S5
The History:
I bought a Samsung Galaxy S5 SM-G900f from Ebay with a Software Problem. The seller said, he try to flash a Custom Room like Cyanogenmod, he don´t know which)
The flash failed (i don´t know why). Now the S5 have a brick.
I tried so much, but i can´t repair it, pls help me.
The Problem is:
I can not start the Recovery Menü to flash a new Custom room. Always i tried to start the Menü, there is just a text "recovery Booting", then the phone restarts after round about 10 sec.
So even if i tried to start the S5 normally without recovery Menü, it´s just the Samsung Galaxy S5 Logo power by Android, then the phone restarts all the time.
The only thing i can do is start the download mode.
Things i tried:
- Firmware installation about Kies (pass, but still the Same Problem)
-Firmware Installation about Odin (pass, but still the same Problem)
- CF-Autoroot flashing (pass) then i tried to flash a recovery like PhilZ but then when i tried to open the recovery it`s "Recovery is not seandroid enforcing" Set Warranty bit
I tried so many firmwares but still the same Problem. Now it is installed Lollipop 5.0 G900FXXU1BOI3_G900FDBT1BOI1_G900FXXU1BOI3_HOME
There is no chance to repair it over ADB oder Fastboot, cause USB-debugging is disabled
Maybe you can help me and help me to stop spend all my time for this phone, cause im interested to know how i can repair it.
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
.
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
Try this hold on (power volume up and home) then do not release until recovery mode boot
sh4dow6oy said:
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
Click to expand...
Click to collapse
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
With some of the newer LP based firmwares, twrp 2.8.7.0 klte is the only version that works.....
Other than that, you might find it necessary to odin back to KitKat (flashing a pit file too) and try 'towelrooting' your device.......
BE WARNED.......If you *do* flash a pit file, make sure it's the CORRECT pit for your device.....In some cases, flashing the wrong pit will permanently kill a device.
http://i.imgur.com/rVnFwJM.jpg
So i had try it.
1.)hold on ( volume up and home) then do not release until recovery mode boot
--> The phone always restart no recovery is possible
2.) I try to install on LP the TWRP 2.8.7.0 Still the Same error "recovery is not seandroid enforce" Set Warranty bit: recovery
Before i root the device with CF-Autoroot and it´s pass
3.) I downgrade to 4.4.2 with a full package of Firmware with CSC,BL,AP,CP and a pit file.
The downgrade pass, when the phone starts it says recovery booting in blue script, then the phone restarts. I can´t intstall towelroot, cause the system is not booting, so i´d tried to install CF-Autoroot (pass) and then also the TWRP 2.7.0.0 pass but not booting and then 2.8.0.0.
But still the same "recovery is not seandroid enforce" Set Warranty bit: recovery
If you got a pass on your KK flash, you have a stock recovery......
Have you tried booting into that recovery and wiping cache and factory resetting? It is necessary to do this when downgrading......
http://i.imgur.com/rVnFwJM.jpg
Yes it was a KK stock recovery.
I tried to boot in this recovery, but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds.
It´s not possible to wipe cache or make a factory reset, cause the recovery is not booting. That´s my problem. Also when i have flash the stock firmware i tried to go into the recovery but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds. ( 4.4.2 and 5.0)
I´can´t flash a custom rom cause the recovery is not booting. I´ve no idea
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
http://i.imgur.com/rVnFwJM.jpg
Very familiar -
https://dl.twrp.me/klte/
Flash TWRP 2.8.7.0 .TAR (Do not unzip) with ODIN 3.10.7 - in Download mode (Volume Down & Home & Power)
It will say "recovery is not seandroid enforce" Set Warranty bit" at the top when you boot into recovery, give it a few seconds and you should see the TWRP blue splash screen, and then recovery should load up
Then flash a custom ROM from TWRP
--
If that all still fails, try flashing the PIT file for the G900F along with a Stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract this one so it is .PIT, and add it to ODINs PIT section
If that still fails, try flashing just the PIT file with ODIN, and then the TWRP 2.8.7.0 with ODIN and see if you can get in that way
Or PIT and TWRP together
Try a combination until you get back in
Also try different versions of TWRP from 3.07 up to 3.10.7
keithross39 said:
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
Yes i did, than the it happen what i wrote upside
What do you mean with "@'detection' does the OP's situation sound familiar?....."
Click to expand...
Click to collapse
It sounds familiar because it's happened to many other people recently too, although TWRP usually fixes it
Follow my instructions above
No chance guys,
i´d tried to install all TWRP which i found once in 5.0 and also i tried to install on 4.4.2. But always the same mistake. (recovery is not se.....)
Now i´ve tried to install CWM-Recovery and now there is no mistake like upside. Now in blue "recovery booting" and in yellow set warranty bit: recovery
But the recovery is not booting, the phone always make a restart. I´d also tried to install the recovery without auto-reboot in odin. But no help.
I don´t understand, cause when i flash a Stock Firmware, the recovery menu ,in my opinion, it have to start, but it doesn´t. Maybe i have anexpensive paper weight now
I search the internet to install a Custom room over Odin, but i don´t find any results, so i think it is not possible.
Do you have more ideas? Pls help. Thanks
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
check PM
bowzee said:
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
Click to expand...
Click to collapse
Another idea?
Joda899 said:
Another idea?
Click to expand...
Click to collapse
Ithink you should try re instal original firmware using odin and get ur warranty back then fix it on samsung
I found a trick that seems to help slightly, until an actual solution is published. During a misbehave episode, assuming that something shows up (which is not always the case):
1) press <power + home + vol-down> until the download thing shows up
2) press <up-arrow> so that it actually gets into download mode
3) press <power> until the screen turns off and immediately release (otherwise it will try to reboot); this makes it stay off
4) let it "rest" for a certain period of time (could be 5 minutes or more)
5) back to normal
Did u root your device vai CF auto root? Did it work?
This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too