- Qtek 2020 / 2020i Cradle
- Alluminium Case
- Usb cable + Car charger + Travel Charger
- 5 Lcd protector skins
- Stylus
- SD Sandisk 2GB card
- Battery 1200mAH
- Battery 1590mAH
- Black Sillicone Skin
- Full Housing ( O2 XDA II )
- Original Qtek Stereo Earphones
- FM Wireless Stereo Transmiter ( with usb cable+ car charger )
-Wi-Fi Wireless WLAN 802.11b - Secure Digital SDIO Card
Link here: http://cgi.ebay.com/ws/eBayISAPI.dl...MESE:IT&viewitem=&item=250101161226&rd=1&rd=1
... unlocked, with 2x4 GB SD-Card by Transcend, Brando Case in black, Car holder, new headset (wired) in black (different from picture), USB sync cable, standard charger.
Screen has some very light scratches, housing ist lightly damaged but ok, device works perfect.
Price: est. 300 € all inclusive + shipping.
I'm sure lots of you know about the Brodit Proclip range of car holders - you pick an adapter specifically for your car then a holder for your phone and you've got what looks like a professionally fitted car kit much cheaper than normal.
I've got the passive (i.e. non charging) version fitted to my Peugeot at the moment, have wanted the active version that you wire directly in behind the dashboard for some time, much tidier than having the cigarette lighter cables dangling all the time, but they've always been very expensive, about £55+p&p which often adds to to over £65.
Clove.co.uk are selling them for £36+VAT+p&p, so £44.85 delivered within the UK.
http://www.clove.co.uk/viewProduct....&product=1D1E40AD-7561-47BD-8F7B-3469E71BE354
Limited stock offer, but thought others may be interested. Shouldn't be too hard to wire to either a permanent live or the back of the 12v cigarette lighter.
Incidentally, once Clove have sold out, the next cheapest is MountOnUs - I got my passive holder and the car adapter from them - it's listed as £54.99 under the HTC Touch Pro / XDA Orbit but £49.99 under the Sprint Touch Pro - same Brodit part number though!
http://www.mountonus.com/Sprint-Tou...t-With-Tilt-Swivel-Function-971848-19112.aspx
This is exactly why I came into this forum today.
To find this exact thing. Thanks for sharing!! I shall try to obtain one.
No problem!
Incidentally I'll be selling my passive (non charging) Brodit holder for the Touch Pro once I've fitted this if anyone's interested - you'll just need the ProClip mounting for your vehicle.
Fitted this now - wired in easily enough to the back of the cigarette lighter in a Peugeot 306 - was tricky getting the cable through the fan grille and out through the ventilation duct though but tidier than making holes in the fascia I think and the cable is now completely out-of-sight behind the mount. Highly recommended to anyone wanting a decent car mount without the trailing cables.
Passive Brodit holder now for sale!
http://www.dsldevelopments.com/
Have the active holder for £34.26 + £2.92 shipping = £37.18
Item no. 968848
You may need to add on for the mounting clips, if you need them.
I've bought a few holders for various phones from them.
I ahve the active cradle and charger for my touch pro and it has the cigarette adaptor on the end, could anyone write a guide on how I could hardwire this directly to the battery or whever in a Toyota Aygo?
Hi
I would like to connect a microcontroller serial UART to my HTC P3600
Found some infos for the G1 extHTC, see at end of post
But I want to have direct access to the COM port (which number ?) under WM6.1 even if I hack the IRDA (it is of no use)
Does anyone have such experience and can share ?
Best regards
extUSB pinout :
_____________
| A B C D E |
\1 2 3 4 5 6|
A: GND
B: NC
C: +DATA
D: -DATA
E: +5v
1: +Mic
2: +Right
3: Switch / Rx / CABLE_IN2
4: GND / Tx / CABLE_IN1
5: GND
6: +Left
if you connect 4 and 5, you activate the headphone
the extUSB is also called DC U300
cable, sold at 2.5 USD on ebay : cgi.ebay.fr/HTC-11-PIN-ExtUSB-USB-DATA-CABLE-Touch-Pro-2-HD-Cruise-/270574886743?pt=PDA_Accessories#ht_3795wt_1137
the connector is sold at sarkfun 10.95 USD as breakout or alone
www_sparkfun_com/commerce/product_info.php?products_id=9167
pinout :
1: USB VCC +5v
2: USB Data -
3: USB Data +
4: N / C
5: USB GND
6: Left Audio +
7: Labeled "AG" GND
8: Audio - (GND) Labeled "CK" TX
9: Switch (Talk) Labeled "OT" RX
10: Right Audio +
11: Mic +
12: Chassis Ground (GND)
Documents: For more pinout information see Kineteka
shop.kineteka.com/Products/94-htc-extusb-breakout-mini.aspx
www_instructables_com/id/Android-G1-Serial-Cable/step2/Soldering-the-HTC-ExtUSB-Breakout-Board-Data-Wires/
I would like to share with you my setup which is like a dream come true. I have always imagined that one day I'll have single device that I will use throughout the whole day and now it finally is possible.
I bought an opened box HP Elite X3 Lap Dock of Ebay for 230 AUD in a pristine condition for my Galaxy Note 10+ (European, Exynos). Affter I have received it I had some trouble to connect my phone to the Lap Dock - the original HP cable was missing and the one from Samsung did not work. I finally figured it out - It has to be a USB C cable that will allow video transmission, quick data and power transfer - to sum up it has to be at least USB 3.1 Gen 1 that provides 5 Gb/s, 5V, 3A (Gen 2 provides 10 Gb/s). I bought https://www.amazon.de/gp/product/B01GGKYT7M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 and viola it works!
It is almost a perfect solution - I have been able to switch from Windows laptop instantly, I have prepared a whole lecture with PowerPoint on this setup, I use it from time to time for gaming (love the PSP games and bluetooth controller). All is extremely compact, premium made and useful. The whole set combines: Galaxy Note 10+, HP Elite X3 Lap Dock, Amazon USB C cable, 8Bitdo, Samsung 45Watt Charger, and couple of extras like additional HDMI cable with micro HDMI adapter, USB C to A cable, USB C hub with HDMI, 2 x USB and USB C sockets and foldable bluetooth keyboard with touchpad. All of these fit well in a 11 inch Apple Macbook Air neoprene bag
Connecting the HP Lapdock to the TV with HDMI (using HDMI to Micro-HDMI adapter) and then connecting phone wirelessly with it allows to display on TVs without Miracast.
In order to get regular size font while using DEX I am utilizing MacroDroid macros: Receive Notification DEX App - Change system font to 1.2 and Remove Notification DEX App - Change system font to 0.8 (my default)
The known issues are:
1. Lap Docks speakers does not work - I had to change in settings of DEX and in Developer Settings not to route sound via USB and now when connected sound is played from the phone
2. Touchpad buttons are not recognized - it works perfect other than that (gestures, zooming, scrolling, two fingers for right button)
UPDATE
Audio via lapdock speakers works! - in order to make it work just plug in the phone to the lapdock without turning it on and then turn it on by holding battery button and power button simultaneously for 10 seconds until it boots. When its on in volume panel chose play via display device and enjoy B&O sound.
There is a bad news too - after updating to Android 10 the touchpad is practically unusable - they have change the way it operates and now it moves incredibly fast up and down an extremely slow from left to right - the only option is to use the phone as touchpad which luckily is very good.
The new whole set consists of:
1. HP Elite X3 Lapdock
2. 11 inch laptop bag - https://www.aliexpress.com/item/327...chweb0_0,searchweb201602_9,searchweb201603_55
3. Magnetic USB C 3.1 Gen 2 Adapter 10 Gbp/s 100W PD - https://www.aliexpress.com/item/32985884761.html
4. USB C 3.1 Gen 2 10 Gbp/s 60W 0.5 meter cable for connecting phone - https://www.aliexpress.com/item/32679851391.html
5. Surface Black Pen Loop Holder for attaching cable to lapdock - https://www.aliexpress.com/item/32886514875.html
6. Samsung 45W Charger - https://www.samsung.com/us/mobile/m...t-charging-wall-charger-black-ep-ta845xbegus/
7. USB C 3.1 5A 100W 2 meter cable for charging - https://www.aliexpress.com/item/33027971950.html
8. Thin, foldable bluetooth keyboard with touchpad - https://www.aliexpress.com/item/32782607699.html
9. 8Bitdo N30 Pro 2 Gamepad - https://www.aliexpress.com/item/4000144168333.html
10. USB C Hub - https://www.aliexpress.com/item/32998985227.html
11. USB C cable 3.1 Gen 2 87W 0.5 meter - https://www.aliexpress.com/item/33010968788.html
12. HDMI to Micro-HDMI adapter for tv out - https://www.amazon.com/Cloud-Relays-Micro-Hdmi-Adapter/dp/B07117G478
13. USB A 3.0 to USB C OTG Adapter - https://www.aliexpress.com/item/32828548648.html
14. Micro USB to USB C Adapter - https://www.aliexpress.com/item/32828469071.html
15. USB C to Micro USB Adapter - https://www.aliexpress.com/item/32884655748.html
16. USB C to USB A Adapter - https://www.aliexpress.com/item/32891979893.html
Updated, matured setup:
I can't get my Aussie exynos to work unfortunately.
You have to turn of lapdock first, give it a 10 sec after it has booted than connect it with a usb c 3.1 gen 2 cable (a short one, cables longer than 1 meter seems mot to work) and it should be fine. I am using a 50 cm UGreen cable, sometimes it is required to hard reset the lapdock when it does not pair properly by holding the power button for 10 sec.
An Update:
Finally audio via lapdock speakers works - in order to make it work just plug in the phone to the lapdock without turning it on and then turn it on by holding battery button and power button simultaneously for 10 seconds until it boots. When its on in volume panel chose play via display device and enjoy B&O sound.
There is a bad news too - after updating to Android 10 the touchpad is practically unusable - they have change the way it operates and now it moves incredibly fast up and down an extremely slow from left to right - the only option is to use the phone as touchpad which luckily is very good.
Maybe we can send a request to Samsung to fix the problem with the touchpad because we are many users with it.
Anyone with the tab s (5e or 6). Can check if having same problem?
Thanks
Can you please check underneath your Lap Dock what the model number is?
E.g. V8H07UT#ABA or Y1M47EA#ABH, etc.
I am having the latter also with a European Exynos Note 10+ and I can't it to fully connect (no display).
Thanks!
I bought the HP Lap Dock V8H07UT#ABA for my Note 10+ Exynos (Portugal) and was never able to have it work. I bought many different cables but didn't change a thing. The same cables used to connect my Tab S4 (Snapdragon) to the HP Lap Dock worked flawlessly.
So you are very lucky to have a working setup!
Ok, I got seriously lucky.
Found the mainboard of the V8H07UT#ABA online, and it arrived today.
Replaced the mainboard of my Y1M47EA#ABH with it, and I now have a working Lap Dock with my European Exynos Note 10+. Happy camper here!
JayRayMee.NL said:
Can you please check underneath your Lap Dock what the model number is?
E.g. V8H07UT#ABA or Y1M47EA#ABH, etc.
I am having the latter also with a European Exynos Note 10+ and I can't it to fully connect (no display).
Thanks!
Click to expand...
Click to collapse
Mine is Y7D37PA#ABG and it works fine with european Galaxy Note 10+ Exynos
What kind of USB-C cable are you using? The one that comes with the Lap Dock or another brand? Is Developer Mode enabled ? Thanks.
Currently I am using a cable from Ugreen witch has a proper length and is very well made https://m.pl.aliexpress.com/item/32...detail&spm=a2g0o.cart.0.0.307e3c00rTzEtg&mp=1
It also fits in nicely with a magnetic usb c adapter that I have attached to my lapdock https://www.aliexpress.com/item/32985884761.html?spm=a2g0s.9042311.0.0.27424c4dZXuZyS
Just now I have found one strange thing - I have change the cable I used with and older one which was working fine and now it did not - what did fix this issue was switching the ends of the cable the end that was going into lapdock went to phone and vice versa. I know it should not make any difference since these cables are reversible but it did mabye that will help somebody.
Well, now we got wireless dex!
Upgraded set, now based on Nexdock Touch - https://www.reddit.com/r/SamsungDex/comments/jp7940/my_perfect_mobile_dex_setup_completed/
I am trying to make the Lapdock work with LG V30 - wirelessly I have succeded to make connection as a secondary screen - so the phone screen is projected to the lapdock.
Now I want to be able to use the keyboard and touch pad: I use a ugreen PD100W cable and I can get the notification on the phone that external kb, mouse and sound is detected. no image goes to the lapdock screen. Sound does though on both LG and HP elite x3.
I think the cable might be to blame...
I tried then to connect wirelessly - I can get the image on the lapdock, the kb even works, but I cannot open apps, no mouse is detected (touchpad does not work) Sound too.
Do I need a cable that says 4k on it?
lapdock 1 P/N - Y4T07AA£ABA
lapdock 2 P/N - Y1M47EA£ABU
I bought one then another hoping to make it work, but they have similar behauviour - when connectd via cable, the screen go dark blank, but I can see that it actually works, just a black picture is displayed
Also, anyone knows what is the difference between lapdock models above?