So my S7 Edge (running 6.0.1) was rooted with SuperSU. I installed Magisk by flashing it and it told me it doesn't pass the safety net check
So i've done literally all i can think of to try and install it
I've flashed the stock firmware back, installed magisk and then get told i have no root to use magisk
i've installed SU on stock then magisk and get Error 1
I've tried upgrading to 7.0 and using CF-Auto root, but that doesn't work ("seandroid is not enforcing" error)
I've tried using Superstock and just get an "integrity error"
does anyone know how to install magisk?
Fixed it
Nevermind i fixed it.
For anyone wondering v12 doesnt install MagiskSU for some reason? find your firmware online, extract the boot.img from it, flash that via TWRP to your boot. then flash magisk v11.1 and THAT will install magisk and let SN pass.
Related
Updated to 7.1.1 Beta. Flashed twrp. I then flashed magisk and then phh. I get stuck in a boot lop. I tried twice but each time I keep getting stuck in a bootloop. Does anyone have a work around? I've looked around and seems like everyone is getting it to work but me and a few others? Any help?
Not sure why you want magisk if xposed isn't supported on 7.0+ ? Just use superSU instead.
Edit: There is a (no longer a) benefit in using Magisk/phh, since magisk hide and using xpropset magisk module is detected by SafetyNet already, but see post below for the latest approach (if any):
http://forum.xda-developers.com/nexus-6/help/help-pass-safetynet-rooted-7-0-aosp-t3486834
suhide is not compatible w/ 7.1.1, so SuperSU is not an option for the 6P on the 7.1.1 Developer Preview
Flash magisk and phh su, works fine, but supersu get bootloop, something like this
7.1.1 with supersu (stable or sr1) boots fine, the problem atm is suhide, flashing suhide causes bootloops
Way possible, but without suhide is not very convenient, banks apps not working properly
So the latest superuser by chain fire works? Cause flashing magisk v8 then phh su just sends me to a bootloop.
I'm using magisk and the latest phh su on 7.1.1 and no issues what so ever even have it passing safetynet
All I did was flash the factory image, then two, then flashed phh su, magisk and then rebooted and installed xsetprop through magisk.
how are you getting this working? I haven't tested, but doesn't the 7.1.1 need a custom kernel to bypass safetynet? Kernel source isn;t out yet?
So i followed the unlock and root guide. So far so good. Then i saw an update to magisk today. But updating didn't work neither through the app or twrp. error 1.
But now i can't even flash an older version or supersu. So now i'm stuck at the bootloader, flashing twrp works, but from there root fails.
What to do?
Oh, and why magisk over supersu ?
What version of Magisk to you flash originally?
What version did you updated to?
basicreece said:
What version of Magisk to you flash originally?
What version did you updated to?
Click to expand...
Click to collapse
14 to 14.2. And uninstalling and reflashing did nothing, then both failed. Supersu fails too. Wiping and reflashing stock works. But flashing 14.2 fails again. 14 worked. Tried uninstalling and flash supersu 2.82 but it failed again.
Edit: If i wipe first and then flash supersu it seemed to work.
fusk said:
14 to 14.2. And uninstalling and reflashing did nothing, then both failed. Supersu fails too. Wiping and reflashing stock works. But flashing 14.2 fails again. 14 worked. Tried uninstalling and flash supersu 2.82 but it failed again.
Click to expand...
Click to collapse
Just keep 14.0, 14.2 is a beta so it's normal it could lead to some problems
14 is latest. 14.2 is beta. Don't use this.
Magisk is better than SuperSU. Hide root on apps and is systemless. Personally I think it's better.
Yes, get rid of SuperSu. Magisk has root built in so no need for an additional install to root.
I used Magisk on my Nexus 6P. Great functionality.
I have the Lg G6 but haven't found a need to run Magisk since now I can get most stuff without root.
I would like to ask if anybody has managed to successfully install and run Xposed for Nougat on our phone.
My phone gets stuck in boot after flashing. Also anything newer than Magisk v12 also gets stuck during boot.
Any thoughts on how to solve this?
I got it working. I installed stock Nougat ftf. 238, then i flashed Genesis Kernel 1.06 and flashed twrp via adb. After that i installed xposed in the usual way - insall App and Flash via twrp. But i only tried xposed without magisk, it is not sytsmeless. Its working perfect.
tempurastyle said:
I would like to ask if anybody has managed to successfully install and run Xposed for Nougat on our phone.
My phone gets stuck in boot after flashing. Also anything newer than Magisk v12 also gets stuck during boot.
Any thoughts on how to solve this?
Click to expand...
Click to collapse
Install xposed via magisk downloads
Sent from my F5321 using Tapatalk
I was waiting for a root enabler for oreo (41.3.A.2.24), and I could find https://forum.xda-developers.com/xperia-x-performance/how-to/guide-stock-kernel-root-twrp-drm-fix-41-t3711837.
But this link is for version 41.3.A.0.401 and it does not work for everybody including me.
Since androplus still didn't bring out a new version of his kernel I tried the method from the above link.
But I'm using newer versions than in the description, I use TWRP 3.2.0, Magisk manager 5.2.2 and Magisk 15.2.
I can install the new version, twrp, the new boor image and Magisk 15.2.
I can boot and Magisk runs but the Safetynet control failes and Magisk does not enable root.
On the installation of the boot image, twrp and magisk I got some messages (marked in red)
unable to mount storage
failed to mount
Before I tried with magisk manager 5.5.1 and magisk 15.1 but then I got stuck at boot time at the sony logo.
Does anybody have a way to root Oreo (the latest version), enable DRM and enable root?
Ok I started all over again and I noticed I didn't follow the procedure first time.
So I excluded the FOTA kernel but whatever else I check no full wipe is done, I can always see the previous installed apps, it does not matter if I check Cust-reset, master-reset or reset-wipe-reason, the system is not wiped.
So that's my first problem, how to wipe the previous install.
Flashing the rom seems to be OK, same thing for flashing boot_oreo.img and twrp-3.1.1-0-dora.img.
I'm not sure about twrp 3.2.0.0 because this version is off-line now, so I tried with TWRP 3.1.1.0 and 3.2.1.0 but they all gave me the same result.
Problems start when I have to flash drmfix.zip, safety-net cleaner or magisk 15.2. The procedure tells me the flash is ok but have a look at thet attached images, I get errors while flashing. One picture for drmfix, one for safety-net-cleaner and one for magisk 15.2
After flashing all of this I can boot successfully but when I try to get root in ES File Explorer pro, it does not work. When I go into Magisk and try the afety-net check I get ctsProfile false and basicIntegrity False.
So the rom does work but I do not get root.
I tried all of this with the Italian rom 41.3.A.2.24.R1E ? I can start all over again with the UK version 41.3.A.2.24.R2E but I do not know if this makes any sense.
So can anybody tell me what to do to get it all going?
deboopi2 said:
I was waiting for a root enabler for oreo (41.3.A.2.24), and...
Click to expand...
Click to collapse
1 - Do use always Adrian DC latest fully working TWRP build for dora.
2 - You don't need a 3rd party kernel to achieve that, instead, you can easily create your own one, based always on stock kernel!
Thats the SELinux's problem.
Flash this first then flash magisk
https://forum.xda-developers.com/xp...ment/mod-sony-stock-patcher-xperia-x-t3528148
im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR
works for me without problems after last 2 years on any Rom.
dont know what you doing wrong?!
I cant get to bypass safetynet V: other than that root works fine
J0nhy said:
I cant get to bypass safetynet V: other than that root works fine
Click to expand...
Click to collapse
this actually fixed sn for me without the fix installed
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
desu1337 said:
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
Click to expand...
Click to collapse
Maybe on stock roms...it should work on l8r versions tho...
try this already https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
also cant have xposed installed with the sn fix