Database Users

Is it possible to free the Vista recovery partition?

As title!
Is is possible to delete the Vista recovery partition from hardisk and free the space?

Hi
Have a look at this thread
http://forum.xda-developers.com/showthread.php?t=378890
Should be possible. Remember it looks like it is difficult to get full functionality from an alternative Vista installation so you may not want to destroy this partition unless you have a backup and/or HTC release full downloadable drivers.

Recovery partition
I have used BartPE to boot off an external USB DVD Writer.
From within BartPE you can then use Ghost to capture the ENTIRE drive.
The ***Hidden*** restore partition cannot be see by anything, not ghost, not partition magic, not acronis, it simply is not there.
My belief is that this is due to a BIOS restriction and the FN+F3 boot that does allow the restore is either.....
1. A special mode where the bios can see the hidden partition
2. The actual recovery image is on a separate flash area that we can't see.
Either way having the ghost will recover the hard drive.
I have installed both XP and Linux on the Shift and still been able to reboot, press FN+F3 and do a vista re-installation.
This makes me believe the image is on a separate flash device that only the BIOS section can see.
Hope this helps.
Blitz

blitzspear said:
I have used BartPE to boot off an external USB DVD Writer.
From within BartPE you can then use Ghost to capture the ENTIRE drive.
The ***Hidden*** restore partition cannot be see by anything, not ghost, not partition magic, not acronis, it simply is not there.
My belief is that this is due to a BIOS restriction and the FN+F3 boot that does allow the restore is either.....
1. A special mode where the bios can see the hidden partition
2. The actual recovery image is on a separate flash area that we can't see.
Either way having the ghost will recover the hard drive.
I have installed both XP and Linux on the Shift and still been able to reboot, press FN+F3 and do a vista re-installation.
This makes me believe the image is on a separate flash device that only the BIOS section can see.
Hope this helps.
Blitz
Click to expand...
Click to collapse
Dude my findings are the same, How did you get XP working did you use the vista drivers? did they work? if not where did you get the drivers from? Please tell as I really could do with a dual boot PC

XP.....
Hi there...
I basically tried installing XP SP2 and then XP Tablet Edition.
Both work great, minus a load of drivers.
You have approximately 800MB RAM free and it flies but you lose all the ability to do touch stuff.
There are drivers i've found out there for the sound/graphics/thumbpad and usb network but others i couldn't find.
As to installing XP it's simple, boot off a USB DVD with XP and just install it, format the entire drive (don't worry it won't see or kill the recovery vista partition if it is a partition, still think it's a separate flash card) and install.
As to the dual booting this is not possible.
I halved the drive using Acronis Disk Suite and whilst it would install, i created two PRIMARY partitions and made the second one bootable.
On restarting i installed XP but then i couldn't get VISTA to boot once i made partition one bootable.
Basically to dual boot XP/VISTA you must install XP first, then install VISTA.
However having investigated this I can find most of the additional software / drivers but the VISTA that is restored is a very optimised installation and just installing VISTA Ultimate or even normal Business may not provide the same experience.
Until we can get access to the RESTORE AREA and get at the image (whatever it may be) I think killing the drive completely to reload VISTA won't be possible.
Our only real hope I think is to get HTC to release XP Drivers (I'm still at a loss to explain why they chose VISTA over XP Tablet Edition). The performance increase with XP over VISTA is quite staggering but the loss of functionality makes it pointless at the moment.
Blitz
Whilst it does provide a much faster overall experience at this time without the driver support it's pointless.
Again Linux is the same, I haven't yet tried installing OSX on it, but that would be even more problematic as Apple don't do drivers for most of the hardware out here that XP / VISTA will detect.
I have resorted to going back to VISTA and removing Origami and a few other bits and pieces and updating to SP1.
I find the whole shift now is much better after installing SP1 and without Origami 2.0 on it.
Hope that helps.
Blitz

installing Windows XP alongside Vista
I've used the method described in this link to install XP on my U810 as a dual-boot alongside the pre-installed Vista.
http://www.pro-networks.org/forum/about88231.html
blitzspear, what devices were not working in XP besides the touchscreen?

Missing drivers
Everything was missing,
had to download VGA driver from intel. but you lose some of the resolutions.
There is a sound driver and a USB Network device available and the mousepad worked.
There's a PCI device missing and no SD/wifi and chipset.
So basically not a lot works.
Regards
Blitz

IIRC the Raon Digital Everun has the same SDIO Wifi component. Maybe you could try its driver?
http://www.raondigital.com/data/WLAN Driver_1_1.zip

WiFI driver for VISTA
Hi, dont You have WiFi SD8686 driver for VISTA, please ?
I reinstaled my Shift to localized Vista and this driver I still miss.
more:
http://forum.xda-developers.com/showthread.php?t=376600

[Q] Marvell sd8686 LAN SDIO not working... also webcam

This applies to a specific device not on these forums but running Windows 8
I upgraded from Windows 7 on my Viliv N5 and now the webcam and a "Marvell 802.11 sd8686 Wireless LAN SDIO" won't start... I checked both online and computer manufacture... I got drivers from the computer manufacture that hard reboots and one from online with: "Error code:10 Device Cannot Start"
As for the webcam I might have to call the now shutdown business so I'm hoping for a fix...

Did you do an in-place upgrade, or did you do a clean install that replaced Win7? In-place is supposed to work, but in my experience it almost never does it perfectly. Clean install is the way to go. Copy your driver files to a flashdrive or something first in case Win8 can't find them, but usually it can.
Alternate option: Uninstall theoffending drivers (entirely; use Device Manager and remove the driver software). Then reboot the PC and see if it tries to load the drivers from Windows Update. This *should* find them. If it doesn't, try installing the drivers from disc / downloaded files.

Tried Windows Update as soon as I did a CLEAN install... wiped HDD incl recovery >.<
I can provide device id... and the website gives me a corrupt driver
Edit: Will do a "Dirty Install" if I reinstall stock will my key expire?

[Q] How do I go back to windows7?

I upgraded my asus laptop to windows 8, and the d drive that had a stock backup of windows 7 got wiped somewhow..... so I really want to go back to windows7. I dont have a disc but i do have the windows 7 product key on my laptop... I cant dual boot, i cant connect phones to qpst... my work for school cant be done on windows 8..... I NEED windows 7 back... how can i do this?

A) Given that Win8 is compatible with all software and damn near all drivers that Win7 was (a few legacy driver models, like the ability to use XP video drivers, were deprecated), I doubt you actually can't use Win8 instead.*
B) You need Windows installation media to install Windows. I would hope this would be self-explanatory. It usually comes on a DVD (in a "box", or with your PC) or in a DVD image (giant .ISO file). However, your PC may have a "recovery volume" (a reserved chunk of the hard drive) containing the install image.
* You may need to do one or both of the following to get legacy software to work:
1) Enable the legacy .NET framework versions. Start -> type "features" -> look under Settings -> Turn Windows features on or off -> .NET Framework 3.5.
1.1) If you need .NET 1.1, you'll have to download and install that separately, I think, although at this point that version is like 10 years old.
2) Run programs in Compatibility Mode. For programs designed to run under XP, this includes running them as Admin. Right-click the program (in Windows Explorer; you can get there by right-clicking the tile in Start and selecting Open File Location), go to Properties -> Compatibility. Choose the compatibility option(s) most suitable to your needs.

.net frameworks checked....
Sent from an Apple killing JellyBean

If it's a driver issue you're having, which it most likely is because most driver install tools aren't ready for Win8 yet, you'll need to extract the relevant driver from the executable (or find one extracted online somewhere) and install it using the windows device manager.
If you can't find a solution to the problem, burn the relevant Win7 ISO file to your license key, and reinstall Windows 7 from that until devices become more compatible.

Kyoraki said:
If it's a driver issue you're having, which it most likely is because most driver install tools aren't ready for Win8 yet, you'll need to extract the relevant driver from the executable (or find one extracted online somewhere) and install it using the windows device manager.
If you can't find a solution to the problem, burn the relevant Win7 ISO file to your license key, and reinstall Windows 7 from that until devices become more compatible.
Click to expand...
Click to collapse
Thats the route im going...
Sent from an Apple killing JellyBean

Then im going to try to partition hdd so i can also install an ubuntu iso
Sent from an Apple killing JellyBean

Could be he's. Used to win 7 ,doesn't want to relearn 8 doesnt want to re install drivers and still nothing works, I'm not harping against 8. ,just think its really not. A desktop OS,works great as a phone and a tablet,useless as a desktop
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

I got everything situated... Windows 8 is just better with a touch screen and i miss my windows 7 themes and stuff. Now only way to boot windows is thru bios boot override... Or else grub only lets me boot ubuntu.... A little annoying but tolerable
Sent from an Apple killing JellyBean

You can download one of these upgrade isos from Digital River/Microsoft and then install using your key. Make sure you download the appropriate version Pro, Home, etc, it should say next to your key what it is and chances are your computer can run x64 unless its a netbook.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
I've used these isos with OEM Windows 7 keys and it activates just fine and is perfectly legal since its your licensed key and the ISOs I linked to are unmodified from Microsoft and require a key to work.

Yep. Got an iso on a disc and installed then had to install all the drivers
Sent from an Apple killing JellyBean

Can't install Windows 10 Technical Preview

I can't install Windows 10 Technical Preview on my Samsung RV509 laptop (Core i5 and 6Gigs of RAM). I tried doing a clean install, and once I boot from the flash stick It gets stuck on the Windows logo and the loading dots doesn't appear, so I tried to do an upgrade from Windows 7 and once it restarts it gets stuck on the windows logo and doesn't load after that (I tried both 32 and 64bit versions) then i get the error 0xC1900101-0x20017. So I tried to install it inside a virtual machine and i tried another machine,and it did install just fine. I tried everything I can from trying to launch the setup from the command prompt but still once it restarts it gets stuck on the windows logo. I'm not sure what do I need to do to get it to install and boot. I've tried with every single build since the insider program started till 9926.
I would really appreciate any help in this matter. Thank you.

I think you didn't really tried a clean install, since you wrote that you've tried to upgrade later. Clean install means you erase all traces of previous system installation. Also, it's good to delete all partitions. Maybe you're hard disk is MBR formatted and Windows 10 requires GPT (just a suggestion, I'm not sure about that).
Secondly, are you trying an UEFI install? I've had Win10 for a couple of months now but I remember having problems with starting UEFI installation from USB stick. To do this, you have to change partition layout on usb stick to GPT, then make new primary partition, format it to FAT32 and copy all files from install iso to usb stick. Then you can start your install in UEFI mode and I think this will help you. Just remember to delete all partitions and let Windows create new partition layout for you, this way it will create EFI partition.
If the installer says it can't create partitions in UEFI mode, you will have to change partition layout to GPT by yourselft. You can put your hdd in a PC and use a Windows based tool (search google) or maybe some Linux LiveCD will let you do that without removing your hdd.

All I did was just use demon tools and install over my w7. It installed as Uefi. Don't like it and w10 gave me an option on restart to roll back my system. I did and went back to w7.

You shouldn't use Daemon Tools to install Windows from an ISO. If Windows needs to reference a file inside the Install.wim folder on the disc for any reason, that copy will fail as the disc it's using is not a physical disc, but a virtual one that the new installation has no knowledge of. The best way to install Windows from an ISO is to copy the ISO to a flash drive or to the local hard disk and run setup that way, or use Rufus to create a bootable USB media for installing. That could be related to your error codes.

Thank you sanshinron for your reply. I always do a clean install for windows, the only reason that i tried to upgrade is that the setup didn't even load when booting from a USB stick (stuck on the windows logo). The USB stick was created using Microsoft's "Windows 7 USB DVD Download Tool". The same stick loads fine on other PCs. I will try to do what you suggested with the USB stick and give it another try.
sanshinron said:
I think you didn't really tried a clean install, since you wrote that you've tried to upgrade later. Clean install means you erase all traces of previous system installation. Also, it's good to delete all partitions. Maybe you're hard disk is MBR formatted and Windows 10 requires GPT (just a suggestion, I'm not sure about that).
Secondly, are you trying an UEFI install? I've had Win10 for a couple of months now but I remember having problems with starting UEFI installation from USB stick. To do this, you have to change partition layout on usb stick to GPT, then make new primary partition, format it to FAT32 and copy all files from install iso to usb stick. Then you can start your install in UEFI mode and I think this will help you. Just remember to delete all partitions and let Windows create new partition layout for you, this way it will create EFI partition.
If the installer says it can't create partitions in UEFI mode, you will have to change partition layout to GPT by yourselft. You can put your hdd in a PC and use a Windows based tool (search google) or maybe some Linux LiveCD will let you do that without removing your hdd.
Click to expand...
Click to collapse

try https://rufus.akeo.ie/ for the usb install

onebyside said:
try https://rufus.akeo.ie/ for the usb install
Click to expand...
Click to collapse
I tried both Rufus and ISO2Disk to make the USB stick GPT, but still i'm having the same issue with the setup not loading.

toulan said:
I tried both Rufus and ISO2Disk to make the USB stick GPT, but still i'm having the same issue with the setup not loading.
Click to expand...
Click to collapse
I installed UEFI without a problem, is there a reason your set on GPT?

I tried everything with the USB drive and it just installs fine on other pcs. I guess this could be because of hardware not supported yet by Microsoft in the current windows 10 builds. I found many people having the same issue. I just hoped there could be a fix to get the installer to start

I encountered same boot-hang problem when clean installing Win 8.1, and Win 10 shouldn't be different. My solutions:
Post-install boot-hang: The hang at logo boot happens when I don't format the install-to partitition with Win 8.1 installer (I normally partition/format using another tool, to skip the redundant WinRE partition that Win creates). Formatting with the installer allows the boot to complete (you can still keep the original partitioning).
Pre-install boot-hang: Some PCs are idiosyncratic with USB boot; likewise, some USB sticks are "different" from others. I found that using DiskPart to partition & format the USB stick (like a HDD) works when Rufus & straight formatting wouldn't. This, admittedly from a small sample set of one particular problematic combo. Simpler is just try to use different USB sticks.

toulan said:
then i get the error 0xC1900101-0x20017
Click to expand...
Click to collapse
This error indicates an update issue.
Try this:
- Ingersoll mini tool partition wizard
- check your disk type
If it's GPT,
- download minitool portable ISO and burn on USB with UUI.
- boot to the application and convert GPT to MBR
- Format the C: partition or wherever the previous windows was installed
- then overwrite it with win10
If it's UEFI change it from the bios. Turn off secure boot and everything.
Try and let me know.

Is there Windows 10 for Nokia Lumia 625?

Tiash420 said:
This error indicates an update issue.
Try this:
- Ingersoll mini tool partition wizard
- check your disk type
If it's GPT,
- download minitool portable ISO and burn on USB with UUI.
- boot to the application and convert GPT to MBR
- Format the C: partition or wherever the previous windows was installed
- then overwrite it with win10
If it's UEFI change it from the bios. Turn off secure boot and everything.
Try and let me know.
Click to expand...
Click to collapse
After using the minitool partition wizard i found out that it was already MBR.

feherneoh said:
Does that pc have Win8.1 installed with UEFI?
If so, connect installer drive, go to shutdown menu, hold shift, press restart
Then select Use device => UEFI USB
Click to expand...
Click to collapse
Tried it, but still the same issue.

Then turn off safe boot and try format the whole disk and start Windows installation from scratch?
Only if you want Windows 10 badly and are ready to sacrifice your data.
Caution: This 'might' work. No guarantees.

Tiash420 said:
Then turn off safe boot and try format the whole disk and start Windows installation from scratch?
Only if you want Windows 10 badly and are ready to sacrifice your data.
Caution: This 'might' work. No guarantees.
Click to expand...
Click to collapse
Tried it, but it didn't work. I think this could be an issue with a hardware that is not supported yet by the preview. I guess i'll have to wait for that to change in next builds.

toulan said:
Tried it, but it didn't work. I think this could be an issue with a hardware that is not supported yet by the preview. I guess i'll have to wait for that to change in next builds.
Click to expand...
Click to collapse
That might be it cause it's a preview and they sure are known for this kinda issue

Tried build 10041 and still same issue.

toulan said:
Tried build 10041 and still same issue.
Click to expand...
Click to collapse
My Laptop is SAMSUNG RV509 but with intel core i3 1st Generation and 2 GB of RAM inside
And I have the same problem with you when trying to install Windows 10 Technical Preview even with it's latest version just like you, get stuck at begin of instalation process, Windows logo appear without any waiting animation (circle of dots), and nothing happen after that.
Just like you, I'm trying install it so many time and so many way such as update latest version of BIOS, but nothing change.
So, if you have a solution for our laptop, please take your time to guide me.
"Sorry if any inconvenience come to your attention with my English writing skill"

shinstar123 said:
My Laptop is SAMSUNG RV509 but with intel core i3 1st Generation and 2 GB of RAM inside
And I have the same problem with you when trying to install Windows 10 Technical Preview even with it's latest version just like you, get stuck at begin of instalation process, Windows logo appear without any waiting animation (circle of dots), and nothing happen after that.
Just like you, I'm trying install it so many time and so many way such as update latest version of BIOS, but nothing change.
So, if you have a solution for our laptop, please take your time to guide me.
"Sorry if any inconvenience come to your attention with my English writing skill"
Click to expand...
Click to collapse
Of course, once i find a solution i will post it here, so far no luck.

[GUIDE] Install Windows 10 on TW800/801

I offered myself to do a guide to install Windows 10 on the Winbook TW800/801, this might work for the others too and even for other tablets, however.
TRY AT YOUR OWN RISK, I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR TABLET OR THE WORLD.
This guide is very tedious but it will payoff in the long run, I regret nothing and I will not comeback to Windows 8/8.1.
-Requirements:
2 - USB Stick: 16GB or more. Why 2?: I just want to make sure nothing goes wrong, I will explain later why.
USB Hub with USB Keyboard and USB Mouse
A brain?
I will simplify the guide, later I will make a longer one, and see if more devices work.
Step 1. Do the gansta rap. Go to Control Panel > Backup and Restore.
Step 2. When asked rock and plug in one of the USB then make the HDD backup.
Step 3. With the second USB Stick now make a backup of Windows folder.
Step 4. Extract the Windows 10 ISO (recommended builds 10041 or 10049) in the C:/ Disk
Step 5. Enter the extracted Windows 10 folder, then enter > Source
Step 6. Execute the Setup.exe in the source folder, not the one outside that folder or else it will give you error.
Step 7. Follow all the normal steps to install Windows, it will not give you the option to format but it will let you install it.
Step 8. After it is installed nothing will work, this is where the USB Hub / Keyboard and Mouse will give be of use.
Step 9. After plugging the USB Hub / Keyboard and Mouse also put the USB Stick where the Windows folder is located.
Step 10. Go to Device Manager and then all the devices with ? or ! go to them and update drivers, use specific location and put the location where the old Windows folder is.
Step 11. Repeat the same for all devices even for all the devices that are working fine without any symbol, same goes for graphic.
Step 12. ENJOY!, now unplug everything touch and WiFi/Bluetooth and anything else should be working.
I will update the guide in some more hours to add more information.
​

lumia 5202
can u tell me how to install window 10 in lumia 520

mpmca90 said:
can u tell me how to install window 10 in lumia 520
Click to expand...
Click to collapse
I don't have any Lumia phone that I could try it on, sorry mate.

Thanks but it didn't work for the TW800 I'm missing hard drive space on this POS and it won't let me do it off of removable media either. Sucks looks like I'm stuck with 8.1 for ever.

I successfully installed windows 10 on my TW-801 with the free windows 10 download and everything works perfect. I went directly to Microsofts website and first installed internally - I had to install it twice the second time via the sdcard image so it does not ask you for the product key. I am also running Ubuntu via VMWare virtual machine on this tablet. Windows 10 is so much better than 8.1 on this tablet. Also when you download windows 10 it gives you the option of 32 or 64 bit. I just installed the 32 bit since the stock 8.1 was 32 bit - but I am wondering since it is a 64 bit processor if you can install the 64 bit version.

rsktkr1 said:
I successfully installed windows 10 on my TW-801 with the free windows 10 download and everything works perfect. I went directly to Microsofts website and first installed internally - I had to install it twice the second time via the sdcard image so it does not ask you for the product key. I am also running Ubuntu via VMWare virtual machine on this tablet. Windows 10 is so much better than 8.1 on this tablet. Also when you download windows 10 it gives you the option of 32 or 64 bit. I just installed the 32 bit since the stock 8.1 was 32 bit - but I am wondering since it is a 64 bit processor if you can install the 64 bit version.
Click to expand...
Click to collapse
Do you have any idea to install Windows 10 from bootable USB without Windows 8.1,
I did usb installation and it always crash with blue screen
My tw800 is broken, it cannot login into Windows anymore, it always do automatic recovery and No. Windows shows... i have delete system.001
Please help...!
thank you

clean install 10 tw802
i was able to clean install windows 10 from usb. its a bit of a pain reinstalling all the drivers and you do need usb hub to connect mouse and keyboard but it can be done.

Is there any way to run android apps?
Sent from my CHC-U01 using Tapatalk

Has anyone been able to install Windows 10 Threshold 2 (1511 lastest build) My TW801 freezes always at 40% of the installation

dtracks said:
Has anyone been able to install Windows 10 Threshold 2 (1511 lastest build) My TW801 freezes always at 40% of the installation
Click to expand...
Click to collapse
The 1511 build installer won't finish on the WinBook tablets. You should use the installer from July 29th to get Windows 10 on it, then let it update itself to 1511.

how you can fix touchscreen and gaerometer drivers? I have win10 on my TW800 but only work with keboard and mouse and vertical postion. Any drivers you have for those too becasue rest is working better than 8.1
so how i can fix it? Microcenter said they are not supporting Windows 10 rollback to Windows 8.1 but which version or where i can find drivers they are not helping too.

Thanks @TravisAntonio !
For anyone still fooling with the TW801, I'm about to find out if I can fresh install the latest Windows 10 (otherwise using these instructions), however, if build 1903 still has the same installation problem that 1511 evidently had, Dell has a webpage here where they give direct Microsoft hosted download links to the 32 and 64-bit versions of the MediaCreationTool for build 1507. Note that even if you want to download the 32-bit version but you're doing it on a 64-bit PC, you want the 64-bit MediaCreationTool - you can still download the 32-bit ISO from the 64-bit tool. I can confirm that although the size of the build 1507 ISO doesn't match up with the sizes listed on Dell's site (same link as above), the size is close enough - possibly the tool is downloading the very last, most up to date build 1507 ISO.
The direct Microsoft hosted download links for the build 1507 MediaCreationTools are:
x86: MediaCreationTool
x64: MediaCreationTool64
Once I get around to actually fooling with the tablet again, I'll post an update regarding which fresh install build I had to use.

rsktkr1 said:
I successfully installed windows 10 on my TW-801 with the free windows 10 download and everything works perfect. I went directly to Microsofts website and first installed internally - I had to install it twice the second time via the sdcard image so it does not ask you for the product key. I am also running Ubuntu via VMWare virtual machine on this tablet. Windows 10 is so much better than 8.1 on this tablet. Also when you download windows 10 it gives you the option of 32 or 64 bit. I just installed the 32 bit since the stock 8.1 was 32 bit - but I am wondering since it is a 64 bit processor if you can install the 64 bit version.
Click to expand...
Click to collapse
Thanks for share me such information. I am also using window 10 64 bit version.

Well, some great news. I followed the directions but with a very recent build 1903 of Windows 10 x86, downloaded 8/17/2019 - MD5 of the ISO was A9E0929B411E18867F6A630A8C4731FD (I'm giving the MD5 because one x64 ISO I downloaded just three weeks prior would never work correctly on my regular PC but the x64 ISO I downloaded the following week has worked perfectly.
Possibly very important: First, I didn't have to use the Setup.exe in the Sources folder - I used the main Setup.exe, I unchecked the option to keep personal files and apps, and I allowed it to download all updates and drivers. No idea if that made any difference, but it's what I did.
The bad news is I think my USB port is busted - I was hoping a fresh Windows install would fix the problem but alas it's probably because the tablet hit the floor last week. Devices get some power but as you can see in the screenshot attached of Device Manager within a minute of logging into the new Windows installation for the first time, all device drivers are installed but when I plug anything into the USB port, I get the "Unknown USB Device (Set Address Failed)" error. Port worked fine 4-5 months and possibly more recently but the tablet fell on the floor last week so guessing that's why it's not working.
It's a good thing the drivers loaded on their own since I couldn't even use a USB keyboard and mouse. I don't know if the MicroUSB port is actually a proper USB port as well, but first, it's wonky already - the power cable has to have pressure coming from underneath it to tilt it a little "down" into the port in order to charge, and so far with any MicroUSB adapter, I haven't gotten any regular USB devices to work through it.
Cheers!
Edit: Forgot to mention that when Windows was booting the first time after the install was complete, it eventually froze on some kind of progress screen (immediately before the OOBE). The tablet screen would still both timeout and go dark and respond to power button presses but would still have the progress circle frozen. I believe I was still able to get to a shutdown menu, if I remember correctly, and shut down the tablet, after which I was able to start it back up and boot fully up without a hitch.
Also note that I had a small fan blowing on the back of the tablet all along

Great write,thanks for sharing