Guys i am using moto g4 play single sim version (XT1607). Still can i root and flash these roms?
Sharath356 said:
Guys i am using moto g4 play single sim version (XT1607). Still can i root and flash these roms?
Click to expand...
Click to collapse
I'm using the US Cellular version which is the single SIM xt1607 and I've had no trouble unlocking boot loader and flashing twrp or any Rom, in stock Rom I was using xposed as well. Currently running axosp room with no issues.
jestyr8 said:
I'm using the US Cellular version which is the single SIM xt1607 and I've had no trouble unlocking boot loader and flashing twrp or any Rom, in stock Rom I was using xposed as well. Currently running axosp room with no issues.
Click to expand...
Click to collapse
Thank you bro. I previously used an MTK device and i know about flashing and rooting. But never used custom kernel. Can we use custom rom without any custom kernel? or is it necessary that i have to flash custom kernel for every custom rom?. Also give me links of bugless roms for our device?
Sharath356 said:
Thank you bro. I previously used an MTK device and i know about flashing and rooting. But never used custom kernel. Can we use custom rom without any custom kernel? or is it necessary that i have to flash custom kernel for every custom rom?. Also give me links of bugless roms for our device?
Click to expand...
Click to collapse
I've been using the ASOPEtended Rom and have had no issues. Download can be found in the main Android development thread. As for custom kernels. I've been using squids kernel, but you can use the kernel built into the Rom with no issues
jestyr8 said:
I've been using the ASOPEtended Rom and have had no issues. Download can be found in the main Android development thread. As for custom kernels. I've been using squids kernel, but you can use the kernel built into the Rom with no issues
Click to expand...
Click to collapse
Thanks for the info bro. I have to install kernel like flashing roms, right?. How is squid kernel any improvement?. How to flash super su on aosp exteneded rom?
Sharath356 said:
Thanks for the info bro. I have to install kernel like flashing roms, right?. How is squid kernel any improvement?. How to flash super su on aosp exteneded rom?
Click to expand...
Click to collapse
You flash the kernel just like the rom,I would flash the rom, then open gapps or bean gapps. Next I would flash supersu which you can find by doing a search of the forum, wipe dalvik cache, start finish setup then flash squid kernel. Also download kernel auditor from play store to get the most out of squid kernel. Helix kernel is another alternative based off squid kernel. Both squid and Helix allow you to change several options to improve battery life and performance.
jestyr8 said:
You flash the kernel just like the rom,I would flash the rom, then open gapps or bean gapps. Next I would flash supersu which you can find by doing a search of the forum, wipe dalvik cache, start finish setup then flash squid kernel. Also download kernel auditor from play store to get the most out of squid kernel. Helix kernel is another alternative based off squid kernel. Both squid and Helix allow you to change several options to improve battery life and performance.
Click to expand...
Click to collapse
Thank you bro. Installed Aospextended But there was a bug, camera and videos are stopping at a point. I flashed Helix kernel(Didn't tried squid kernel) then bug was gone, now everything is fine. I will try kernel auditor. Thanks for the guidance
Sharath356 said:
Thank you bro. Installed Aospextended But there was a bug, camera and videos are stopping at a point. I flashed Helix kernel(Didn't tried squid kernel) then bug was gone, now everything is fine. I will try kernel auditor. Thanks for the guidance
Click to expand...
Click to collapse
Yeah the bug seems to be in all the lineage based ROMs current builds
Could anyone provide me with the stock radio of xt1607 android 6.0.1?
Related
I was wondering about the overclocking kernal for cm7. just how do i put it in. Do I have to do that when I first install or can I add it later. also does it really help. I mean is the difference really noticeable or not at all. I am still deciding if I should do it or not.
Kernels are flashed through ClockworkMod and can be flash anytime after you flash a rom. If you use the search bar you can easily find what particular kernel works for your setup.
OK, I think I found the right one but I was also wondering if I could install it when I first installed cm7. When I installed it I saw that it was searching for the kernel and for gapps but didn't find the n and skipped it. Could I install it then
chad11 said:
OK, I think I found the right one but I was also wondering if I could install it when I first installed cm7. When I installed it I saw that it was searching for the kernel and for gapps but didn't find the n and skipped it. Could I install it then
Click to expand...
Click to collapse
CM7 has the ability to be overclocked as it sets.
settings > CM settings > performance > CPU settings.
just be extremely careful when Overclocking devices. it can takes it's toll in the long run.
and the g/apps are not kernel dependent they are ROM dependent.
OK but what do you mean by gapps are not kernal dependant
chad11 said:
OK but what do you mean by gapps are not kernal dependant
Click to expand...
Click to collapse
On *UNIX based devices. They have a section of the firmware called the "kernel". The kernel accepts the coding, binary and scripts from the RAM/ROM and tells the hardware how to act, what to do, and when to do it.
The g/apps have nothing to do with the kernel.
The g/apps are Google's property and cannot be included in AOSP based ROMs. Those ROMs are developed from Google's code. And developers do not have the ability to add those at will. So we must flash them after/prior (depending on he ROM) to get the Google Apps.
YES! DO IT!
for me its like day and night, it so much smoother with dals OC kernel. and yes you can flash the OC kernel any time. you can flash cm7 rc1 then OC kernel in the same boot. or you can first install cm7 to check it out for a while and then later flash the new kernel. if you planning to flash dal's 6/18 kernel, make sure to get his app NC Tweaks.
NC Tweaks here:
http://forum.xda-developers.com/showthread.php?t=1104039
Dal's Kernel here:
http://forum.xda-developers.com/showthread.php?t=925451
thanks. What I want to know is how to flash it. do I do it the same way as gapps( have wifi and reboot in recovery mode) or is there a different way?
chad11 said:
thanks. What I want to know is how to flash it. do I do it the same way as gapps( have wifi and reboot in recovery mode) or is there a different way?
Click to expand...
Click to collapse
You place the over clock zip file in the root of your sd card and flash it through cwm like you would a rom or gapps. So for example you would flash cm7 then gapps then the overclock kernel.
Not to Jack this thread, but I want to update from cm7 old kernel to New nightly build. Does the new kernel flash with the nightly?
Sent from my Optimized Shift using XDA App
JeramyEggs said:
Not to Jack this thread, but I want to update from cm7 old kernel to New nightly build. Does the new kernel flash with the nightly?
Sent from my Optimized Shift using XDA App
Click to expand...
Click to collapse
When you move from stable cm7 to cm7 nightly the new kernel is included. However the included kernel is overclockable only to 975mhz. If you want a higher clock speed you'll have to use dals 6182011 kernel, up to 1200mhz.
whats is cmw?
chad11 said:
whats is cmw?
Click to expand...
Click to collapse
it's actually CWM.
ClockWork Manager
basically boot into recovery then flash.
OK. but this may be a stupid question but will the cm7 kernal work with the stable version7.0.3 because that is what I have.
chad11 said:
OK. but this may be a stupid question but will the cm7 kernel work with the stable version7.0.3 because that is what I have.
Click to expand...
Click to collapse
I'm not following you cannot use just a Cyanogen(mod) kernel. They are built into their ROMs.
chad11 said:
OK. but this may be a stupid question but will the cm7 kernal work with the stable version7.0.3 because that is what I have.
Click to expand...
Click to collapse
sorry, but no. dal's 6/18 OC kernel will not work with 7.0.3....
...just flash n118 and you'll be fine
Ok thanks anyway. do you know when the kernal will work with a stable version
chad11 said:
Ok thanks anyway. do you know when the kernal will work with a stable version
Click to expand...
Click to collapse
The latest nightly should be considered stable. It is in release candidate stable for the next stable build. The next stable build should be released in the next couple of days.
neidlinger said:
it's actually CWM.
ClockWork Manager
basically boot into recovery then flash.
Click to expand...
Click to collapse
No--It's- Clock Work Mod Recovery
CWMR ;^}
Jimbo67 said:
No--It's- Clock Work Mod Recovery
CWMR ;^}
Click to expand...
Click to collapse
There is a Clockwork ROM Manager and a ClockworkMod Recovery image.
Together they are known as "CWM" Since one is a recovery and the other is a ROM manager.
I'm curious what everyone thinks the best Recovery is for the Razr M and what are the best kernels as far as functionality, battery life, and speed.
I haven't played around with installing custom kernels and ive been using the CWM recovery on my razr m and im currently running the AOKP custom ROM.
Dead Calm, arghhh kernel
Sent from my XT907 using Tapatalk 4
I think cwm is better than twrp but I am prejudiced by having wiped my extSD in one of the newest versions. See my signature link for an older BETTER version.
I like TWRP 2.6.0 and I had been having great performance with Carbon ROM 1.8 running the arrrghhh kernel. Currently though I'm having issues running arrrghhh kernel with the Carbon ROM 4.3 nightly (runs smooth with the provided kernel) and yes I did use the CM 10.2 version. I'm sure this will sort it's self after a few more updates.
***edit***
as of 8/16/2013 the arrrghhh kernel and carbon rom nightlies now work together properly
Brucifer5150 said:
I like TWRP 2.6.0 and I had been having great performance with Carbon ROM 1.8 running the arrrghhh kernel. Currently though I'm having issues running arrrghhh kernel with the Carbon ROM 4.3 nightly (runs smooth with the provided kernel) and yes I did use the CM 10.2 version. I'm sure this will sort it's self after a few more updates.
Click to expand...
Click to collapse
what benefits come with using the arrrghhh kernel and is there a thread on here that i cant find? lol
jb14813 said:
what benefits come with using the arrrghhh kernel and is there a thread on here that i cant find? lol
Click to expand...
Click to collapse
Over/Underclocking and more governor options you can read about it here http://forum.xda-developers.com/showthread.php?t=1893050
Brucifer5150 said:
Over/Underclocking and more governor options you can read about it here http://forum.xda-developers.com/showthread.php?t=1893050
Click to expand...
Click to collapse
When installing a custom kernal, do i have to take any special steps such as wipe dalvic etc..? Or simply just flash zip from cwrm?
Making a backup and wiping cache and dalvik are always a good idea.
I'm a complete noob with custom kernels. Never flashed one before.
So someone please give me step by step instructions to custom kernels.
What is the best stable kernel for Z00L? I'm running older 7.1.1 build of Aim rom? Can I dirty flash it?
Yeah sure man dirty flash it .
I'm using POISON v4.0 myself . Havent been disappointed by it.
Works great , lag free , performance boosted etc
https://forum.xda-developers.com/zenfone-2-laser/development/kernel-poison-kernel-z00t-z00l-t3702256
And the steps to install a custom kernel is easy like flashing any zip .
Just make backup and then flash the kernel through recovery and then clear the cache .
ALL DONE !!
kirito05 said:
Yeah sure man dirty flash it .
I'm using POISON v4.0 myself . Havent been disappointed by it.
Works great , lag free , performance boosted etc
https://forum.xda-developers.com/zenfone-2-laser/development/kernel-poison-kernel-z00t-z00l-t3702256
And the steps to install a custom kernel is easy like flashing any zip .
Just make backup and then flash the kernel through recovery and then clear the cache .
ALL DONE !!
Click to expand...
Click to collapse
And what should I do with the EX Kernel Manager?
Any instructions for that?
Darkweb_182 said:
And what should I do with the EX Kernel Manager?
Any instructions for that?
Click to expand...
Click to collapse
I'm using the 3gb variant without changing any settings in the Ex KERNEL .the battery life is better compared to the stock kernel and dosent heat up much during charging(using moto g5 charger)
Still you can refer to this https://forum.xda-developers.com/ze...e-kernel-configuration-noob-friendly-t3716859
I'm using RR 6.0.0 2018525 and yesterday i flashed a custom kernel project r8 after installing the kernel everything was fine... yesterday evening i notice that WiFi is not starting up....it click to toggle it but it automatically gets off...and hotspot also not starting up... anyone please help me WiFi is very important for me please guide me...is something wrong with presist partition...or what ?
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Valentino911 said:
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Click to expand...
Click to collapse
Already did but no success...flashed RR again without custom kernel but problem still exists
Valentino911 said:
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Click to expand...
Click to collapse
Thanks bro it worked when i tried it 2nd time!!! Happy now
Azeemkwow said:
Already did but no success...flashed RR again without custom kernel but problem still exists
Click to expand...
Click to collapse
You need to flash stock rom and use persist resurrector to fix the problem. Then reflash latest rr and latest custom kernel.
t0per666 said:
You need to flash stock rom and use persist resurrector to fix the problem. Then reflash latest rr and latest custom kernel.
Click to expand...
Click to collapse
I dirty flashed the rr without custom kernel and it solved the problem for me!!
I'm using stable oos build 5.1.2. Is there any need to use a custom kernel? Does it really help if I use a custom kernel.
sleepwalking0593 said:
I'm using stable oos build 5.1.2. Is there any need to use a custom kernel? Does it really help if I use a custom kernel.
Click to expand...
Click to collapse
Help for what? If you have no problems, don't flash things that you don't need.
There's no general recommendation to use a custom kernel without an intention.
Every kernel has its own advantages over the others(and stock) where you must decide/try if you need it. And custom kernels can have side affects also, be prepared to face some...