Hi everyone!
I have an issue on my Erisin ES4681P with Android 5.1.1.
I tried to plug an external audio board (Cmedia CM6631A) and it seems that something went wrong with the front panel buttons.
They seem shifted: the GPS button skip tracks, the menu button toggles the EQ and the Volume works no more...
Is there a way to reset to factory default or the replace the button configuration to default?
I found no way to get in recovery or some "default" in the factory settings accessible via code "126"...
Thanks!
In factory setting you should find a menu with the possibility to set and/or reset the touchscreen and also the buttons... It's the "Key Study" menu
Related
Hi
Is there a way to factory reset a Eonon GA7163 headunit. It runs android 6.
I know it can be done through Car Settings>Factory Reset. But the touch screen doesnt detect a finger along the bottom row of the screen, you can press has hard as you want, so i cant press the Car Settings option
Thanks
Hello there. I have the car stereo 8" VW POLO 6R Android Double DIN AC83XX. Suddenly, when I opened my vehicle, I noticed that the my double din was completely reset. Radio does not work, physical keys do not work, all settings are reset. All the menus were returned to Chinese. By entering the hidden menu (Password: 8888) I made all the settings as far as I know. However, the physical keys still do not work in any way. I can't even turn up the volume. The keys do not respond. I was hoping to introduce key combinations from the hidden menu to the KEY tab, but I think he wants me to upload a file from the SD card. Maybe it has a setting so that the physical keys don't work, but I failed to solve this problem. Can you help me for my physical keys? I think the problem is software-based. Thank you in advance for your help.
Happy Days..
Best regards,
I have installed an Android 8.1 HU (plug & play and all working).
The only issue I can see is on the SWC buttons, the "next" button is sending the signal as the previous function and the "previous" button is sending the signal as the next function. Used for MP3 music and radio stations.
All other SW buttons are working as expected (vol +, vol -, aswering calls, mute, etc)
After entering to "Car Infortainment > Steering Wheel Buttons" I can see the attached image.
If I press the "next" or "previous" button on the screen with my finger, it starts to blink, then I press the desired button on my SW.
It seems this is not the correct procedure, because I have tried all the options and still, the next and previous buttons are doing the wrong job (pressing the same or the oposstive button).
Anyone knows how to reset in the right way the SWC buttons through the attached image interface?
what did the reseller suggest when contacted for support?
marchnz said:
what did the reseller suggest when contacted for support?
Click to expand...
Click to collapse
Seller has not idea about what advanced/factory settings is and the HU factory is not sharing the real codes for access (they are afraid something might crash).
I could access thanks to a code suggestion from a XDA Dev user.
marchnz said:
what did the reseller suggest when contacted for support?
Click to expand...
Click to collapse
Marchnz, do you know how to reset the SWC buttons in this interface?
Hello I bought the TS10T on AliExpress.
As with any install I do a hard reset. This has always worked for every radio without problems.
Now I have the problem that the left and right touch buttons no longer work.
I have all the passwords for the factory settings but I just do not manage to set the buttons. does anyone have an idea?
radio: MLOVELIN TS10T
kind regards
Try touch screen in 4 places at same time.
This opens calibration screen.
press button in each corner.
Then you program touch buttons.
I have video showing how, but too big to upload here - 2.1M
you will have problem with canbus now
I have Junsun V1 head unit with LTE and canbox.
CAN settings is selected as "VW RZC".
Steering wheel buttons working good.
I have not connected KEY 1 and KEY 2. It`s not working. SWC is not working and that is ok, because CAN is working.
The problem is:
When I press volume UP on the wheel, volume down, next, prev - works good
When I press phone button on the steering wheel, the head unit open by default Bluetooth app.
So, when someone is calling to me, I can`t pick up the phone from the steering wheel, because Bluetooth app is opening.
Everything is coded in by CAN (VW RZC).
How to edit can settings? or how to upload new setting? How to change bluetooth for “pick up”?
Once again, please forget about key 1, key 2 and SWC.
Pure CAN recoding.
I would like to know the answer to how to recode CANBUS settings. My volume up and down keys work as expected, but my phone key opens the Bluetooth app also and I want to turn it into a "next track" button and the hang up button into a "previous track" button.
For your problem, there is a submenu in 8878. I think it is in "Other" but possibly in CAN that reverse volume up and down. That should fix that problem. If you can't figure it out I will check next time I'm in my van.