Database Users

[GUIDE][ROOT][UNIVERSAL] FORCE INSTALLING STOCK OTA UPDATES WITH SToCK RECOVERY

Since lollipop there is no manual update option in huawei updater and even the huawei stock recovery has no or less interface which has no adb sideload option. This became a crunch to flash the update which your friend got and which u dont.
This Method is Universal for all huawei devices
In order to apply ota update using this method , root access is a major requirement so be sure your device is rooted.
If u had twrp recovery , at first flash SuperSu package to root your device (Try systemless root only) .
After successfull root ,flash stock recovery from twrp and reboot system.
Step 1:
In my case b370 is the last ota i found for kiw-l22 which vsriram92 posted here . Thanks to him for posting the update before 99% users got their update :good:
Download the relevant update package (ota) which you need a relevant base package to install it on . Ex: b360 as base for b370 update
step 2:
just remember the path where u downloaded the package . Install Flashify from playstore or From Here
Select Zip file which is the third option in flashify .
step 3 :
Navigate to the path where u downloaded ota package select the update.zip (ota package).
flashify starts downloading the package to its path asks you for root access .
Grand Su permissions , Select Cwm recovery if flashify asks as the next option.
Now the phone reboots to recovery and starts flashing.
After the ota update , your device will be unrooted . so take a backup of your stock recovery by following below guide.
Enable Usb debugging and connect ur phone to pc.
navigate to adb folder and place twrp.img or recovery.img in adb folder ,open command window from the same folder and type
Code:
adb reboot bootloader
Now type
Code:
fastboot boot recovery.img
or what_ever_its_name.img
now it temporarily boots twrp , take a backup of your stock recovery and then flash twrp for permanent install and then reroot ur device.
Happy flashing :laugh::good:​

it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified

rbtrai said:
it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified
Click to expand...
Click to collapse
You might have installed a zip which is not stock ota update . i haven't posted this without trying . I installed b370 with this method and made this live here .

i downloaded from the link provided above which vsriram92 posted...

rbtrai said:
i downloaded from the link provided above which vsriram92 posted...
Click to expand...
Click to collapse
Were you in b360 before doing this ?

Thanks again Gopi. Another great contribution.

vsriram92 said:
Were you in b360 before doing this ?
Click to expand...
Click to collapse
yes ofcourse

This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option

Ajith san said:
This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option
Click to expand...
Click to collapse
Nope. It was there in EMUI 3 previously. Now, we can't unless it has only update.app.

so b370 is only for the ones who gave root access to their phones?

Like your contribution. Perfectly updated to B370.

rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
great

Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?

Zacki06 said:
Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?
Click to expand...
Click to collapse
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...

ShadySquirrel said:
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...
Click to expand...
Click to collapse
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.

Zacki06 said:
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.
Click to expand...
Click to collapse
TBH, I'm on a verge to start building LOS or PAC/Slim/whatever is properly maintained and fast for my own needs and ditch EMUI completely....
I'm searching for other firmwares now via FirmwareFinder, there is a probability that one is a leaked test or something like that, because it simply doesn't want to flash. If I find out something, I'll continue on thread you've linked, to avoid flooding this one.

Hi. Thanks for your guide.
I need to update my phone with several ota updates. I just need to repeat this guide's procedure until updated to the last ota or there is a better way to do that?

Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
How to update step by step.. Mention it plz

Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just because you can't do it, that doesn't mean it's fake.

Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just follow the procedure and you will be done

Soft-brick P8 Lite [PRA-LX1] Europe

Hi guys,
I hope you can enlighten me regarding my bricked phone.
I tried to convert to Dual SIM following this guide:
https://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
I tried to flash the version (ALE-L02) that was in that guide and but it failed during the fastboot process because of a partittion error. I guess that was because I've tried to flash a stock room from a different model version (mine is PRA-LX1).
To get the phone back up I tried to flash one of this stockrooms:
http://www.stechguide.com/download-huawei-p8-lite-2017-android-nougat-firmware/
https://www.guidebeats.com/2017/02/21/nougat-b140-huawei-p8-lite-2017/
Because I don't have a micro sd card at the moment I used the huawei extractor tool to remove the boot, cust, recovery and system from the files I got from those sites and try to flash via flashboot. The process is done without any kind of errors.
First boot after flash the phone appears that it will start because it displays the logo and the blue bubbles but soon after stays like the image here: https://s1.postimg.o...172118b7227.jpg and wont boot.
What should I do ?
Many thanks!

@squallx85
It's because you are flashing wrong firmware .By the way links aren't opening. What was your last firmware? I mean build number.
---------- Post added at 12:58 PM ---------- Previous post was at 12:52 PM ----------
Link for firmware.
http://www.carbontesla.com/tag/huawei-p8-lite-2017-pra-lx1/

Suleiman01 said:
@squallx85
It's because you are flashing wrong firmware .By the way links aren't opening. What was your last firmware? I mean build number.
---------- Post added at 12:58 PM ---------- Previous post was at 12:52 PM ----------
Just edit the links (thank you btw).
I didn't really save the build number before) but now it's giving me this one: PRA-LX1C33B120
I tried that firmware before too and it didn't work.
Thanks for the response
Click to expand...
Click to collapse

squallx85 said:
Suleiman01 said:
@squallx85
It's because you are flashing wrong firmware .By the way links aren't opening. What was your last firmware? I mean build number.
---------- Post added at 12:58 PM ---------- Previous post was at 12:52 PM ----------
Just edit the links (thank you btw).
I didn't really save the build number before) but now it's giving me this one: PRA-LX1C33B120
I tried that firmware before too and it didn't work.
Thanks for the response
Click to expand...
Click to collapse
Can you go to recovery?
Click to expand...
Click to collapse

Suleiman01 said:
squallx85 said:
Can you go to recovery?
Click to expand...
Click to collapse
only to the EMUI. I tried to flash twrp but despite saying it worked I can't go in.
Click to expand...
Click to collapse

@squallx85
There is an app called firmware finder. Download it a download firmware version C33BXXX and flash it via fastboot. The reason why your phone is stuck because you flashed C02BXXX instead of C33XXX.

Suleiman01 said:
@squallx85
There is an app called firmware finder. Download it a download firmware version C33BXXX and flash it via fastboot. The reason why your phone is stuck because you flashed C02BXXX instead of C33XXX.
Click to expand...
Click to collapse
Well I have followed your advice and downloaded the full ota and extracted the boot, cust, system and recovery from the update.app but it doesn't change anything

squallx85 said:
Well I have followed your advice and downloaded the full ota and extracted the boot, cust, system and recovery from the update.app but it doesn't change anything
Click to expand...
Click to collapse
Try resetting from Huawei recovery. I know it may seems that it won't make a difference but since you don't have any sdcard it is worth a shot.

Suleiman01 said:
Try resetting from Huawei recovery. I know it may seems that it won't make a difference but since you don't have any sdcard it is worth a shot.
Click to expand...
Click to collapse
already did that but the end result it's the same :\ I'll try to get my hands on a sdcard to try the other method (hopefully it will work)

So...quick update: I was able to get a sdcard and tried to update the firmware that I got from the firmware finder. When I start the process "holding volum up + down and the power button" the instalation stops at 5%. I really don't know how to get around this.

you're flashing the wrong firmware dude... the PRA-LX1 i for Huawei P8 Lite 2017... all the firmwares starting with ALE-LXX are for Huawei P8 Lite....

amageek said:
you're flashing the wrong firmware dude... the PRA-LX1 i for Huawei P8 Lite 2017... all the firmwares starting with ALE-LXX are for Huawei P8 Lite....
Click to expand...
Click to collapse
I understand that but I got the firmware from firmware finder and downloaded the version for my firmware and still it can't pass the 5% instalation process if connected to the pc. If is not connected to the pc it says instalation failed

any ideias how I could solve this ? I tried to install the firmware PRA-LX1C33B130 from firmware finder but it's stops at 5%. Do I need the exact firmware (PRA-LX1C33B120) ? If so, I really can't find it.

squallx85 said:
any ideias how I could solve this ? I tried to install the firmware PRA-LX1C33B130 from firmware finder but it's stops at 5%. Do I need the exact firmware (PRA-LX1C33B120) ? If so, I really can't find it.
Click to expand...
Click to collapse
This page has all the official firmware for your device. Press the update button to download one. Make sure it's C33xxxx (you can press F3/Ctrl+F and search for "C33") and that it's the full version, not OTA. Then follow the second half of this guide.

JpegXguy said:
This page has all the official firmware for your device. Press the update button to download one. Make sure it's C33xxxx (you can press F3/Ctrl+F and search for "C33") and that it's the full version, not OTA. Then follow the second half of this guide.
Click to expand...
Click to collapse
I did that and still doesn't work. After I flashed the firmware it goes on a bootloop. unfortunately nothing has changed

squallx85 said:
I did that and still doesn't work. After I flashed the firmware it goes on a bootloop. unfortunately nothing has changed
Click to expand...
Click to collapse
What does the update screen say? The one with the emui logo and the progress "circle"

JpegXguy said:
What does the update screen say? The one with the emui logo and the progress "circle"
Click to expand...
Click to collapse
When I tried the dload method: Instalation failed at 5%. It's similar to https://www.youtube.com/watch?v=16rHgp0GZ48 (1m30s) but with the screen saying my bootloader is unlocked.
When i flash it with fastboot it just stays like this : https://www1-lw.xda-cdn.com/files/2016/10/unlocked.jpg

can someone enlighten me on this subject? any ideas ?

I know I might be off topic,but anyone else had gapps removed after bootloader unlocking ? to be more specific, after I had unlocked the bootloader using adb and fastboot,I got a restart of the device and going directly to the main screen with some apps missing ( GPlay, google folder with gmail and stuff ) What I can do ? I got the PRA-LX1C432B126 firmware version. I also have the screen that squallx85 has ( the one who tells me that my phone is unlocked and no more trusted )

squallx85 said:
can someone enlighten me on this subject? any ideas ?
Click to expand...
Click to collapse
Hi,
Do you have solved your problem ?
Best Regards

[Guide] Mate 9 Flash Oreo Update Package and Downgrade Nougat

Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware, only tested same brand update and downgrade.
C. Backup data, it might be restore factory default setting especially using downgrade ROM version.
D. Unlock bootloader before flash steps.
E. After update successfully, device might be locked again.
F. HWOTA8 Package (HWOTA8_2017110501.zip)
Flash Update
A. Use Vol-Dn + USB Cable to boot into fastboot mode.
B. Use Replace_Recovery.bat in HWOTA8 to flash TWRP recovery.
C. Disconnect USB cable, use Vol-Up + Power to boot into TWRP.
D. Create "HWOTA8" directory in MTP sdcard.
E. Put hwota8_update.zip, MHA_RECOVERY8_NoCheck.img, and three huawei update package (update.zip, update_data_public.zip, and update_all_hw.zip) files into "HWOTA8" directory.
F. TWRP install sdcard hwota8_update.zip, it will reboot and install update automatically.
Downgrade Nougat
A. Put update.zip, update_data_public.zip, and update_all_hw.zip files into HWOTA8 repack directory.
B. Run repack.bat to update zip files.
C. Go through "Flash Update" steps and use repacked zip files.
D. Enter recovery and do factory reset.
Rebrand
A. Put Put hwota8_rebrand.zip and "OEMINFO.bin" (From HWOTA) into SDCard HWOTA8 directory.
B. Use Replace_Recovery.bat in HWOTA8 to flash TWRP recovery.
C. Disconnect USB cable, use Vol-Up + Power to boot into TWRP.
D. Install hwota8_rebrand.zip, it reboots and factory reset failure.
E. Enter fastboot mode and unlock device again.
F. Use Replace_Recovery.bat in HWOTA8 to flash TWRP recovery and enter it.
G. Do "Downgrade Nougat" steps to the rebrand firmware, it fails and reboot but fine.
H. When going to system press "Vol-Up" to enter eRecovery, do "Low-level format data partition".
I. Wait all done and recovery menu show up, reboot and do "Downgrade Nougat" again.
J. Update should be successful this time, rebrand done.

Just one question my friend. This is only for update Oreo to Oreo right? Not for downgrade?

albertobom said:
Just one question my friend. This is only for update Oreo to Oreo right? Not for downgrade?
Click to expand...
Click to collapse
You should be able to install ROLLBACK with it.
I'm going to test later today.

Ok, this is update oreo for oreo?

aureliomilitao said:
Ok, this is update oreo for oreo?
Click to expand...
Click to collapse
Yes I belive and rollback as well.

albertobom said:
Just one question my friend. This is only for update Oreo to Oreo right? Not for downgrade?
Click to expand...
Click to collapse
ante0 said:
You should be able to install ROLLBACK with it.
I'm going to test later today.
Click to expand...
Click to collapse
Rollback installed now.
You have to modify script a little though, as rollback has no public zip.
So simply remove the line that says
echo --update_package=/sdcard/HWOTA8/update_data_public.zip > /cache/recovery/command
in hwota8_update.zip's update-binary.
You should even be able to install something that's not a ROLLBACK, as long as you factory reset after.
The rollback factory resets automatically.

ante0 said:
Rollback installed now.
You have to modify script a little though, as rollback has no public zip.
So simply remove the line that says
echo --update_package=/sdcard/HWOTA8/update_data_public.zip > /cache/recovery/command
in hwota8_update.zip's update-binary.
You should even be able to install something that's not a ROLLBACK, as long as you factory reset after.
The rollback factory resets automatically.
Click to expand...
Click to collapse
Amazing. Thanks my friend.

albertobom said:
Amazing. Thanks my friend.
Click to expand...
Click to collapse
Going Oreo directly to C432B197 does not work, fails at 6% in recovery.
But good that rollback installs.

ante0 said:
Going Oreo directly to C432B197 does not work, fails at 6% in recovery.
But good that rollback installs.
Click to expand...
Click to collapse
Thanks for the info my friend that works for me. :good:
---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------
ante0 said:
Going Oreo directly to C432B197 does not work, fails at 6% in recovery.
But good that rollback installs.
Click to expand...
Click to collapse
BTW you change script back before test it right?

albertobom said:
Thanks for the info my friend that works for me. :good:
---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------
BTW you change script back before test it right?
Click to expand...
Click to collapse
Of course xD
I did forget first though, and it failed because it couldn't find files...
Rollback installs fine with SuperSU and Adaway (modifies /system) installed.

ante0 said:
Of course xD
I did forget first though, and it failed because it couldn't find files...
Rollback installs fine with SuperSU and Adaway (modifies /system) installed.
Click to expand...
Click to collapse
OK then. This means I can stay beta and update whenever I want
---------- Post added at 06:08 PM ---------- Previous post was at 06:06 PM ----------
@mankindtw my friends you're the best.

it worked, I used the rom on the 13th and it appeared in the FF a rom on the 27th, I downloaded the files and I did this procedure and now whenever new roms appear, just follow here

Is there a way to root Mate 9 with Oreo and which is the best method?

It works on MHAL29C567B190 EMUI 5.1?
Can I do this procedure to update ?

ante0 said:
Going Oreo directly to C432B197 does not work, fails at 6% in recovery.
But good that rollback installs.
Click to expand...
Click to collapse
Add "Downgrade Nougat" and new HWOTA8 package.

Curiousrge said:
It works on MHAL29C567B190 EMUI 5.1?
Can I do this procedure to update ?
Click to expand...
Click to collapse
No, you should use below HWOTA, not HWOTA8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108

mankindtw said:
Add "Downgrade Nougat" and new HWOTA8 package.
Click to expand...
Click to collapse
Did I just say how much I love you?

albertobom said:
Did I just say how much I love you?
Click to expand...
Click to collapse
I guess, you might love me even more now.
Have fun playing with it.

mankindtw said:
I guess, you might love me even more now.
Have fun playing with it.
Click to expand...
Click to collapse
You're the man.

Is there a way to disable vibration of the floating navigation dock when long pressed on oreo it is really annoying?

[ROM] ZenFone 3 OREO BETA LEAKED FOR ZE552KL

Hi Guys, Oreo beta for ZenFone 3 has been leaked (I am a beta tester for ZenFone 3 ZE552KL). The link is at the bottom of this paragraph.
1st Version: 15.0410.1711.6
Link 1: https://drive.google.com/drive/folders/1Fk2Ja8TPnW6VfSiQfepL7sIpDLhgis-2
Mirror https://drive.google.com/drive/folders/1j0mPVfWEJ9G83UhZpv5gGUDgbC8aczTX
This Oreo beta .zip OTA is only for ZenFone 3 ZE552KL
Steps of installation:
1) Make sure that your ZenFone 3 ZE552KL running on WW-14.2020.1711.75 with stock recovery. (Installing via TWRP will NOT work)
2) Download the .zip file from the link above and put this on your Micro SD card
3) Enter recovery mode by pressing Power button & Vol - button
4) Select install update via microSD card
5) Select the .zip file you downloaded
6) Wait 5-10 minutes to install
7) Enjoy
2nd Version: 15.0410.1712.31
Link: https://drive.google.com/drive/folders/1OPhJbHjvzgPwbs4zS2yPT3xriEP6e7Jd?usp=sharing
Mirror: https://drive.google.com/drive/folders/1qnG34xsAI-BL4VKYH_8JRparlOzMNDBd?usp=sharing
You need 14.2020.1712.85 firmware before flashing this Oreo version. I have tested several ZE552KL with other firmware and it's not working.
Steps of installation:
1) Make sure that your ZenFone 3 ZE552KL running on WW-14.2020.1712.85 with stock recovery. (Installing via TWRP will NOT work)
2) Download the .zip file from the link above and put this on your Micro SD card
3) Enter recovery mode by pressing Power button & Vol - button
4) Select install update via microSD card
5) Select the .zip file you downloaded
6) Wait 5-10 minutes to install
7) Enjoy
Currently, Oreo beta is not available for ZenFone 3 ZE520KL. If anyone have the firmware, please share here. Your help is much appreciated.

OreoBooyah said:
Flash the .zip via stock recovery (YOU NEED MicroSD Card)!!!!
Oreo Beta for ZE552KL LEGIT!!!
Not For ZE520KL
https://www.dropbox.com/s/vw6zrinsj5ub721/WW_15.0410.1711.6.zip?dl=0
SHARE
Click to expand...
Click to collapse
Link >View my profile>Donation URL

Can get for Ze520kl????

Unable to update Android 8.0.
"Patching system image after verification"

Well, I was worried/skeptical about this but it did work so thanks a million!

Mine installation aborted ?

Here's mine installation aborted

@OreoBooyah heres the link https://www.dropbox.com/s/vw6zrinsj5ub721/WW_15.0410.1711.6.zip?dl=0
bro the link has been disabled by dropbox.

vishal1286 said:
@OreoBooyah heres the link https://www.dropbox.com/s/vw6zrinsj5ub721/WW_15.0410.1711.6.zip?dl=0
Click to expand...
Click to collapse
Have you successfully installed it?

kuyakom said:
Have you successfully installed it?
Click to expand...
Click to collapse
No brother. Its still downloading. Net is slow at my town.

vishal1286 said:
No brother. Its still downloading. Net is slow at my town.
Click to expand...
Click to collapse
Mine installation aborted.

kuyakom said:
Mine installation aborted.
Click to expand...
Click to collapse
no idea bro y. Enable developer mode and clear cache from recovery and then place the inatallation file in the sdcard and try.

vishal1286 said:
no idea bro y. Enable developer mode and clear cache from recovery and then place the inatallation file in the sdcard and try.
Click to expand...
Click to collapse
What model number of your phone? Mine is ASUS_ZO12DA

kuyakom said:
Here's mine installation aborted
Click to expand...
Click to collapse
bro dont sideload. Place the zip in sdcard and flash. Else redownload the package if it fails. Smthing wrong with sideloading package or the downloaded package.
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
kuyakom said:
What model number of your phone? Mine is ASUS_Z012DA
Click to expand...
Click to collapse
mines Z012D

vishal1286 said:
bro dont sideload. Place the zip in sdcard and flash. Else redownload the package if it fails. Smthing wrong with sideloading package or the downloaded package.
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
mines Z012D
Click to expand...
Click to collapse
I followed op instructions and ended up in installation aborted. You mean "install update via sdcard"? Dont mind the file name

kuyakom said:
I followed op instructions and ended up in installation aborted. You mean "install update via sdcard"? Dont mind the file name
Click to expand...
Click to collapse
yes bro try installing via sdcard. Evn if it fails redownload the file.

vishal1286 said:
yes bro try installing via sdcard. Evn if it fails redownload the file.
Click to expand...
Click to collapse
Alright! I'll Redownload it. Btw after you done installating post some feedback ok?:good:

Download link has been disabled. Can someone please mirror the update in an another website.
---------- Post added at 01:58 PM ---------- Previous post was at 01:57 PM ----------
OreoBooyah said:
Flash the .zip via stock recovery (YOU NEED MicroSD Card)!!!!
Oreo Beta for ZE552KL LEGIT!!!
Not For ZE520KL
https://www.dropbox.com/s/vw6zrinsj5ub721/WW_15.0410.1711.6.zip?dl=0
SHARE
Click to expand...
Click to collapse
OreoBooyah2 said:
OreoBooyah is my primary account. This is my 2nd account. Please share the link on this thread. THANK YOU !!!
AND DON'T FORGET TO SHARE SCREENSHOTS OF OREO HERE
Click to expand...
Click to collapse
kuyakom said:
Alright! I'll Redownload it. Btw after you done installating post some feedback ok?:good:
Click to expand...
Click to collapse
bro download link has been disabled by dropbox

kuyakom said:
Alright! I'll Redownload it. Btw after you done installating post some feedback ok?:good:
Click to expand...
Click to collapse
Can you please do me a favor? Please upload the oreo beta zip and provide me the link. The original link has been dusabled by dropbox for excess traffic.

OreoBooyah4 said:
Hi everyone,
I will upload the beta firmware on Google Drive ASAP. Please be patient. Thank You!
Click to expand...
Click to collapse
thanks a lot. Sorry for being over excited . I want to try it eagerly.

Problems after failed twrp flash

Hello.
Some time ago I've tried to root my p9 lite. I unlocked my bootloader and flashed twrp. I believe I've done something wrong, because after a reboot my phone missed some of basic system apps like clock or calendar. When I try to boot to recovery it says that my data partition is damaged and I'm recommended to wipe it. I've tried this, but no luck there.
So, right now my p9, has no Bluetooth, NFC, clock, calendar and themes. How can I fix this?

did you try ,by update menu in stting , to download full package or restore / update by hisuite ?

sonneper said:
did you try ,by update menu in stting , to download full package or restore / update by hisuite ?
Click to expand...
Click to collapse
update menu takes me to recovery that says me to wipe data. I didnt try this hisuite thingy, how to do it?

sonneper said:
did you try ,by update menu in stting , to download full package or restore / update by hisuite ?
Click to expand...
Click to collapse
Hisuite does nothing lol. Am I forced to use the "dload" method now?

Download firmware , the same on your phone ( use firmware finder ) extract images in update and flash them using fastboot. There is so many post here related to this way of manage it
---------- Post added at 20:50 ---------- Previous post was at 20:46 ----------
or, install firmware finder and update !

sonneper said:
Download firmware , the same on your phone ( use firmware finder ) extract images in update and flash them using fastboot. There is so many post here related to this way of manage it
---------- Post added at 20:50 ---------- Previous post was at 20:46 ----------
or, install firmware finder and update !
Click to expand...
Click to collapse
So basically I should just download c432b380 zip and use Huawei update extractor?
Sorry for the spam, but I want to make sure that I won't fk something up

Maybe the easier way is install firmware finder and update from app

sonneper said:
Maybe the easier way is install firmware finder and update from app
Click to expand...
Click to collapse
Should I download full ota or just ota?

Always full data

sonneper said:
Always full data
Click to expand...
Click to collapse
Sorry for the delay, but atm I have some time to do it. I've tried updating via proxy, but it stops at 0% with a message "Unstable network, unable to download the installation package. Please change networks or try again later."