Related
Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.
batuhur said:
Hi guys
I recently flashed OD4 Stock Lollipop to my phone via Odin with PIT file. It flashed fine but device randomly freezes, pc doesn't detect it (although downloading mode is fine) and the worst is DEVICE DOESN'T WAKE UP SOMETIMES. It just doesn't respond to buttons. It randomly reboots as well. My device had no issues since I flashed via Odin. What can I do???? I have backups from an aosp rom and a custom Touchwiz.
Device : I9500 With 32GB SD
Stock Rom and Stock Kernel
No root >> Can do it if its necessary
Thx.
Click to expand...
Click to collapse
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards
izmaelzx said:
Well, you could a another solution that for others is risky but it's not, if you follow the steps carefully. Flash your correct firmware (with the correct pit for this firmware) with odin 3.10 and check f reset time, auto reboot and Nand Erase All (you will loose ALL your internal data), re-partition (as you have PIT file), and Phone Bootloader Update. When flashing process is finished, the system will reboot to stock recovery and will appear an android repairing, after it it will reboot in Samsung startup but it will not boot, so you must boot to recovery with power+volup, wipe data/factory reset, and wipe cache again. Then reboot and wait, it may take up to five or six minutes approx.
i leave attached an odin version that is woking fine.
I hope it helps.
regards
Click to expand...
Click to collapse
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx
batuhur said:
Alright man I did everything you said and IT WORKED! THX VERY MUCH!! I had a 5.0.1 Chinese Firmware on my PC's hdd (4 files + special PIT) and i flashed it with your Odin and it went good. But I didnt have the Google Play Store on The CHN firmware so I restored my Prism backup and its working flawlessly now. Before flashing the CHN, the backup had the same Lockscreen issue. Now I have the CHN bootloader also. But when I flash the latest OD4 from sammobile (1 file + PIT from another site) It just doesnt flash (FAILED!). So I tried with NAND Erease etc.. then it worked, BUT THE SAME ISSUE AGAIN! What is wring with the OD4? Im on Prism now (flashed CHN before restoring). I want the stock OD4 because its updated. Do I need to flash OD4 with 4 files or with a special PIT?
(sorry for bad english)
Thx
Click to expand...
Click to collapse
Try flashing OD4 this time ticking auto reboot, re-partition, bootloader update, and f reset time, but without flashing the pit file, only the tar.md5 (if so) in AP. As i know the pit for china differs from other countries cause that, google and some bloatwate, and as far i know, OD7 firmware doesn't come with an seperate pit file. You must factory reset before doing this.
Regards.
Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...
Nortabun said:
Everything was fine until I flashed CM13 unofficial.
Now, my bootloader is updated to 6.0 (COJ5 something or COH4), I can't revert to something prior to that: odin fails at sboot.bin NAND write start fail.
-While this issue has occured to many others than me, I'm the only one who can't even boot into CM13 or AOSP based ROMs, even after pushing different variants of ROMs several times through ADB, bootloops are still persistent.
-Any other 5.1.1 Official ROM that's not COJ5 or COH4 fails to flash at odin. COJ5/COH4 ROMS flash succesfully, but the phone doesn't boot past the samsung text.
-I have tried flashing various COH4 ROMS along with their AP,BL,CSC etc, everything flashes succesfully apart from the bootloader file, and after that it's the same samsung text brick. I couldn't find the PIT files (bootloader csc n such) for COJ5..
Is there a place I can find a backed up EFS partion ?file? and restore it myself? Would this get me out of the****hole i'm currently in?
What can I do about this...
Click to expand...
Click to collapse
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
mangui said:
Hi, this may help you http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
Click to expand...
Click to collapse
Yea i came across this, but there was one tiny problem
how on earth am i supposed to root, get busybox, and apply usb debugging on my phone while it has no functional ROM?
and how on earth am i supposed to transfer a backup from my ROMless phone?
Do you have a pit file for repartition
If so, access twrp , wipe everything including your internal storage. Then boot into download mode.
In the computer, load the pit file and your stock coj5 into Odin 3.10 , tick "repartition" and "Nand Erase All"then click start.
Back to your phone - which now should be boot looping - access the stock recovery and wipe. Root - try using a different root method like chainfire's Odin autoroot - then twrp ur phone. Flash cm13 then start running the steps I threaded ( [fix] note 4 exynos bootloop problem ...... )
PM me for what you get
Sent from my HTC Desire 820s dual sim using Tapatalk
It's been a while since I've flashed anything; at least a year, though more likely two. Whatever I have now I'm guessing is a rom called stock(ish)v06, since that's what is listed in my bootloader. I guess the modem (baseband?) is NAE, and I'm still using a very old version of TWRP (2.6.3 according to my signature, haven't checked).
Obviously, the development that still exists for this device has moved well past me. But given how temperamental my device has been lately, I want to give flashing something newer a shot before buying a new device.
Trouble is, I'm not sure how to go about flashing roms and finding the right modem/firmware when everything I have is so out of date.
Suggestions?
beerindex said:
It's been a while since I've flashed anything; at least a year, though more likely two. Whatever I have now I'm guessing is a rom called stock(ish)v06, since that's what is listed in my bootloader. I guess the modem (baseband?) is NAE, and I'm still using a very old version of TWRP (2.6.3 according to my signature, haven't checked).
Obviously, the development that still exists for this device has moved well past me. But given how temperamental my device has been lately, I want to give flashing something newer a shot before buying a new device.
Trouble is, I'm not sure how to go about flashing roms and finding the right modem/firmware when everything I have is so out of date.
Suggestions?
Click to expand...
Click to collapse
Download latest fully stock firmware so you will have latest bootloader and modem from http://www.sammobile.com
which is Lollipop, then flash latest TWRP. If you like stock, there is a stock deodex ROM, there is the awesome Wicked X (heavily modified Lollipop stock), or if stock is not your thing you can get CM12(Lollipop) or CM13 official(Marshmallow)
Sent from my SCH-R220
mattzeller said:
Download latest fully stock firmware so you will have latest bootloader and modem from http://www.sammobile.com
which is Lollipop, then flash latest TWRP. If you like stock, there is a stock deodex ROM, there is the awesome Wicked X (heavily modified Lollipop stock), or if stock is not your thing you can get CM12(Lollipop) or CM13 official(Marshmallow)
Sent from my SCH-R220
Click to expand...
Click to collapse
I want to make sure I understand what you're telling me to do, so a few clarifying questions:
1) I am meant to be updating TWRP first, then using it to flash stock firmware to update the bootloader and modem, and then flashing a rom of my choosing?
2) Why is that method preferable to using Odin to update the modem?
3) If I flash this newer official firmware, am I going to lose root?
4) In flashing the newer firmware, won't my bootloader lock, making it not possible to flash a new rom?
beerindex said:
I want to make sure I understand what you're telling me to do, so a few clarifying questions:
1) I am meant to be updating TWRP first, then using it to flash stock firmware to update the bootloader and modem, and then flashing a rom of my choosing?
2) Why is that method preferable to using Odin to update the modem?
3) If I flash this newer official firmware, am I going to lose root?
4) In flashing the newer firmware, won't my bootloader lock, making it not possible to flash a new rom?
Click to expand...
Click to collapse
1) No, use Odin to flash full stock that you downloaded from sammobile.com, you cannot flash full stock from recovery.
2) Because some if not most newer ROMs require you to be on Lollipop bootloader.
3) Yes you will lose root, but this flashing of stock firmware is to update your bootloader and modem so you can flash the newest ROMs. The lack of root doesn't matter since you will be flashing latest TWRP via Odin and modified ROMs soon after.
4) if you have Sprint L720 the bootloader isn't locked. Check I'm 'about phone' to make sure you have an L720 and not another variant of S4
Make sure Samsung drivers are installed on your computer.
So your flashing steps go as follows:
1) Download everything you need first:
a) Full stock from http://www.sammobile.com to your computer
b) Latest TWRP tar file to your computer
c) The custom ROM of your choice (and correct gapps if AOSP or CM based) saved on external SD card on your phone since it will be flashed via recovery.
2) Turn phone off completely. I pull the battery then put it back in then boot directly to download mode: power + volume down. (Rebooting to download mode doesn't always allow a proper flashing)
3) Start Odin (uncheck reboot and reset time) and then plug phone into computer.
4) If COM lights up green in Odin click AP and select the file you downloaded from sammobile (it will be PDA instead of AP if you are using an older version of Odin) and click OK or start (I don't remember which it has)
5) If it flashes successfully pull the battery and then put it back in and turn the phone on normally. It will take a while to boot, like 15-20 minutes possibly. Flashing stock myself I have seen it say it was successful and it wasn't and the fix for me was to leave reset checked and let it do it's thing.
6) Once you have booted into your newly flashed stock OK3, do step 2 and 3 again, so you can flash TWRP.
7) When you go to flash TWRP in Odin uncheck reset time and DEFINITELY have reset unchecked (if Odin reboots your phone TWRP doesn't stick). Do step 4 again except this time select the TWRP tar file. Once it flashes successfully pull battery put it back in and boot directly to recovery (power + volume up) from there do a backup if you want, if not you can flash the custom ROM and gapps if necessary that you downloaded earlier.
Sent from my SCH-R220
mattzeller said:
1) No, use Odin to flash full stock that you downloaded from sammobile.com, you cannot flash full stock from recovery.
2) Because some if not most newer ROMs require you to be on Lollipop bootloader.
3) Yes you will lose root, but this flashing of stock firmware is to update your bootloader and modem so you can flash the newest ROMs. The lack of root doesn't matter since you will be flashing latest TWRP via Odin and modified ROMs soon after.
4) if you have Sprint L720 the bootloader isn't locked. Check I'm 'about phone' to make sure you have an L720 and not another variant of S4
Make sure Samsung drivers are installed on your computer.
So your flashing steps go as follows:
1) Download everything you need first:
a) Full stock from http://www.sammobile.com to your computer
b) Latest TWRP tar file to your computer
c) The custom ROM of your choice (and correct gapps if AOSP or CM based) saved on external SD card on your phone since it will be flashed via recovery.
2) Turn phone off completely. I pull the battery then put it back in then boot directly to download mode: power + volume down. (Rebooting to download mode doesn't always allow a proper flashing)
3) Start Odin (uncheck reboot and reset time) and then plug phone into computer.
4) If COM lights up green in Odin click AP and select the file you downloaded from sammobile (it will be PDA instead of AP if you are using an older version of Odin) and click OK or start (I don't remember which it has)
5) If it flashes successfully pull the battery and then put it back in and turn the phone on normally. It will take a while to boot, like 15-20 minutes possibly. Flashing stock myself I have seen it say it was successful and it wasn't and the fix for me was to leave reset checked and let it do it's thing.
6) Once you have booted into your newly flashed stock OK3, do step 2 and 3 again, so you can flash TWRP.
7) When you go to flash TWRP in Odin uncheck reset time and DEFINITELY have reset unchecked (if Odin reboots your phone TWRP doesn't stick). Do step 4 again except this time select the TWRP tar file. Once it flashes successfully pull battery put it back in and boot directly to recovery (power + volume up) from there do a backup if you want, if not you can flash the custom ROM and gapps if necessary that you downloaded earlier.
Sent from my SCH-R220
Click to expand...
Click to collapse
Thanks for the very detailed response. This totally clears up my questions. I'll charge my phone this evening and give it a shot in the morning when my battery is at 100%. :good:
beerindex said:
Thanks for the very detailed response. This totally clears up my questions. I'll charge my phone this evening and give it a shot in the morning when my battery is at 100%. :good:
Click to expand...
Click to collapse
Feel free to post back here or PM me if you have any more questions or problems, it wouldn't be the first time walking someone through the process via pm here or other methods
Sent from my SCH-R220
Okay, here is the deal. I was trying to install a costum rom on my att galaxy s4. What I did was I rooted it using king root and tried to flash a rom through rom toolbox, but I believe it was just going to take me to my recovery. After that the screen got stuck on the costum screen with the padlock, and only seems to turn on with a charger plugged into it. I am on 5.0.1 lollipop and have managed to flash the original recovery, but any stock rom I try to flash using Odin fails by saying complete thread failed or something like that, and says on my phone binary 1 or something like that. I really need help on where to start.
Thanks
What is the exact Odin error?
AT&T never released a full firmware for flashing via Odin beyond 4.1.2. Look here for a possible solution: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Once the phone is running a 4.3 or higher bootloader, the bootloader is locked and custom ROMs can't be installed unless the custom ROM is based on a stock ROM.
There's an ODIN flashable Android 4.2.2 MDL bootloader tar file out there somewhere too.
If the bootloader is locked, and it sounds like it is since it's running 5.01, Odin will not be able to flash a 4.2.2 ROM or bootloader.
audit13 said:
If the bootloader is locked, and it sounds like it is since it's running 5.01, Odin will not be able to flash a 4.2.2 ROM or bootloader.
Click to expand...
Click to collapse
Are there any other options, or should I just give up on it?
Look at this thread: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814.
Pay attention to this part of the post which may help:
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
5. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/show...10&postcount=2
audit13 said:
Look at this thread: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814.
Pay attention to this part of the post which may help:
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
5. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/show...10&postcount=2
Click to expand...
Click to collapse
I finally fixed it. I had downloaded that rom before, but it hadn't worked. I decided to try it again and used a different USB port and it worked! Thanks for the help!
I rooted the G950F italian version with oreo according to this guide
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
.... at last step in recovery twrp i didn't permit to install again twrp and unchecked. reboot shows samsung logo and then goes off. in recovery didn't access and i was constrict to install stock recovery. now i am on stock recovery but unable to flash again the twrp for error check file bootloader device 3 binary 1.
i can't flash the official stock rom because goes error only official can install......
ONLY OFFICIAL RELEASED BINAR ARE ALLOWED TO BE FLASHED please help
i installed in s8 italian version the files linked in first post. please help
IF I TRY TO INSTALL CRF7 ROM WITH 4 FILES AND HOME CSC IT SHOWS: CHECK FILES (BOOTLOADER) DEVICE 3 BINARY 1
is like i have not more recovery and i can't reflash with odin... i need help please
That error suggests you are flashing older firmware than what's on the device
how can i solve for motivation that every flash, even the last firmware goes on???
it stucks after click start button in cosmy odin.....
i cannot flash again the twrp, i cannot flash stock firmware, i flashed only bl file, but all errors.......
what can i try?
i hope a suggest
thanks
Here are some photo....
if i try flash 3 files with csc NOT home and without bl file, the result is so:
https://ibb.co/b2UA5K
https://ibb.co/jxZGee
If i try to flash all 4 files the results is so:
https://ibb.co/b2UA5K
https://ibb.co/muYnkK
if i try to flash only twrp the result:
https://ibb.co/mCSrCz
https://ibb.co/m4Geze
Why root this phone?
What mean with my problem???
hey,
Try flashing latest firmware with patched odin