I rooted the G950F italian version with oreo according to this guide
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
.... at last step in recovery twrp i didn't permit to install again twrp and unchecked. reboot shows samsung logo and then goes off. in recovery didn't access and i was constrict to install stock recovery. now i am on stock recovery but unable to flash again the twrp for error check file bootloader device 3 binary 1.
i can't flash the official stock rom because goes error only official can install......
ONLY OFFICIAL RELEASED BINAR ARE ALLOWED TO BE FLASHED please help
i installed in s8 italian version the files linked in first post. please help
IF I TRY TO INSTALL CRF7 ROM WITH 4 FILES AND HOME CSC IT SHOWS: CHECK FILES (BOOTLOADER) DEVICE 3 BINARY 1
is like i have not more recovery and i can't reflash with odin... i need help please
That error suggests you are flashing older firmware than what's on the device
how can i solve for motivation that every flash, even the last firmware goes on???
it stucks after click start button in cosmy odin.....
i cannot flash again the twrp, i cannot flash stock firmware, i flashed only bl file, but all errors.......
what can i try?
i hope a suggest
thanks
Here are some photo....
if i try flash 3 files with csc NOT home and without bl file, the result is so:
https://ibb.co/b2UA5K
https://ibb.co/jxZGee
If i try to flash all 4 files the results is so:
https://ibb.co/b2UA5K
https://ibb.co/muYnkK
if i try to flash only twrp the result:
https://ibb.co/mCSrCz
https://ibb.co/m4Geze
Why root this phone?
What mean with my problem???
hey,
Try flashing latest firmware with patched odin
Related
Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg
i downloaded all the files but the firmware (not listen i have n910W8 = telus)
I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.
I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.
I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)
thanks in advance!!
So I found this
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
which is telus 5.1.1 Rom. ill move this to my root directory and load the 910W8 TWRP file in odin and flash? Ill give it a try now wish me luck lol
ok i followed a guide online and now my phone just keeps restarting. I think im in big trouble. Im able to load openrecovery-twrp-2.8.1.0-trltecan.img into odin and boot to TWRP but now i cant load kernels? looked so easy to do now im down a phone? any help is much appreciated thanks!!!
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
ok so i loaded openrecovery-twrp-2.8.1.0-trltecan.img in AP (for my device) copied the custom rom
" cm-12.1-20150423-NIGHTLY-trltetmo" which was suppose to work with my 910w8 (910T) used recovery to flash it and also supersu it flashed OK... I restart and i see a little blue guy and its stuck optimizing apps. Suck in restart loop.
what did i do wrong? try a different kernel ?
thanks in advance
EDIT 1
im trying the " Tekxodus" rom. this file is way larger whats going on with that. Is it the same procedure to flash it?
EDIT 2
Flashed to tekxodus rom optimizing apps... now its stuck System UI has stopped. and I cant do nothing. Any suggestions? ?? ?
EDIT 3
Do I need to flash a certain BootLoader along with the recovery for my device (BL and AP) ? , reboot in recovery and flash the custom rom ie "Tekxodus" ?
found this guide for 910C
http://www.ibtimes.co.uk/how-root-galaxy-note-4-n910c-android-5-1-1-lollipop-1518168 with these steps
"Step-1: Download the flashable root package and transfer it to the storage of the phone
Step-2: Download Android 5.0.1 bootloader package. Extract it using any extracting tool and you should find a folder containing Odin flashable tar package and Odin binaries"
so confused lol
All you have to do is Odin stock 5.1.1 rom (COI4 i believe) then Odin TWRP then flash Tekxodus V3.2. Let everything optimize and let it sit there for a good 10 mins after optimization. Ignore what its doing. It will just work. No need to flash anything else unless you want Xposed, then you flash that right after flashing Tek (do not boot in between)
any idea where to get a custom kernel for 910w8 5.1.1 to root stock rom?
Im running this rom (flashed using odin)
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
stock telus rom. I loaded this rom by clicking BL in odin and selecting it (along with my recovery for telus 910w8). This was the only was to get my phone back into working order.
______-
I loaded my recovery for telus into odin and went to download mode.
booted into TWRP
Flashed Tekxodus V3.2.
Optimized apps for about 10 minutes and it just restarted and optimized again and again.
One time it said System UI has stopped and I was hooped.
not sure where I went wrong?
thanks for the response btw I really want to get this going cheers
equlizer said:
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
Click to expand...
Click to collapse
can i use any carrier software for the COI4? That's my only question. Thanks for helping!!
I recently upgraded my phone software from 4.4.2 to 5.0.1 and i need to download xposed again and when i searched online it showed that i need to download twrp and i tried this method using adb
https://www.xda-developers.com/how-to-install-twrp/
but after entering the step 4 ,the command control just "showed a searching for device message" .
i had also tried via odin but recovery did'nt show up when i pressed volumeup+power+home . just a bunch of letters on the top right corner . Pls help me (i am a noob)
Forum for the 337m is here: https://forum.xda-developers.com/galaxy-s4-att
Use Odin to flash the tar version of TWRP.
could'nt boot into twrp recovery
audit13 said:
Forum for the 337m is here: https://forum.xda-developers.com/galaxy-s4-att
Use Odin to flash the tar version of TWRP.
Click to expand...
Click to collapse
i tried your method and decided to see if it was working properly and i followed the instruction for rooted devices in https://www.xda-developers.com/how-to-boot-to-recovery/
Not only it did'nt work now my phone is just displaying the samsung galaxy s4 logo with words on the top left corner that says
recovery booting. . . .
recovery is not seandroid enforcing
set warranty bit : recovery
i just also checked the twrp manager app https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
it shows "custom recovery not installed or not detected"
How did you flash TWRP? You confirmed that the model # of the phone is sgh-i337m?
I could never get the fastboot instructions in the original post to work since all Samsung phones (non-Google Play versions) I have used did not support fastboot commands.
audit13 said:
How did you flash TWRP? You confirmed that the model # of the phone is sgh-i337m?
I could never get the fastboot instructions in the original post to work since all Samsung phones (non-Google Play versions) I have used did not support fastboot commands.
Click to expand...
Click to collapse
I downloaded the .tar file from the team win website for the samsung galaxy s4 canada and i opened odin .
switched off my phone , put it in download mode (volume down+power+ home ,pressed volume up again for confirmation)
connected to computer , odin shows added , clicked AP selected the .tar file and clicked start without making any changes in the options tab . Phone restarts
Flashing TWRP with Odin on a phone running a stock ROM will replace the stock recovery; however, if auto reboot is selected in Odin, rebooting the phone after flashing TWRP will cause the stock recovery or overwrite TWRP and this is one reason some people uncheck auto reboot.
I suggest starting over by flashing the latest stock ROM from sammobile.com with Odin 3.07.
audit13 said:
Flashing TWRP with Odin on a phone running a stock ROM will replace the stock recovery; however, if auto reboot is selected in Odin, rebooting the phone after flashing TWRP will cause the stock recovery or overwrite TWRP and this is one reason some people uncheck auto reboot.
I suggest starting over by flashing the latest stock ROM from sammobile.com with Odin 3.07.
Click to expand...
Click to collapse
I have just flashed my phone with stock rom from sammobile , after that i put into download mode again and did'nt select the autoreboot . when it was completed i tried going into recovery mode without switching on my phone so i removed the battery and placed it again and pressed volume up+power+home and i still got the same things that showed up before .
Did you try flashing different versions of TWRP? I suggest starting with 2.87. You can then use TWRP itself to flash newer zip versions.
audit13 said:
Did you try flashing different versions of TWRP? I suggest starting with 2.87. You can then use TWRP itself to flash newer zip versions.
Click to expand...
Click to collapse
Thank you so much . It finally loaded twrp and i started with version 2.8.4.0 FYI .
That's great
hello big worries since 48h with my s8 I explain my problem
so here I had an s8 with a rom custom king rom v8 i wanted to restore it to give it so i'm getting into the bootloader twrp i did a full wipe then at startup it did not turn on anymore i was all trying to put a rom stock but impossible with odin I had error messages but I could reinstall a custom ROM worked but it was not correct that I put an original rom so I insist I make a big mistake j I have to disable the unlock oem so the most way to put a custom rom or access the twrp I download a rom stock with samfirm but the same when I try to flash with odin his puts me failed or so pass but very quickly I do not know what to do with you any more ideas thanks?
I have this message on my s8 after odin told me fail.
sw check check fail bootlader device 3 binary 1
or
sw check check fail bootlader device 3 binary 2
sory bad english i french.
alextueu6 said:
hello big worries since 48h with my s8 I explain my problem
so here I had an s8 with a rom custom king rom v8 i wanted to restore it to give it so i'm getting into the bootloader twrp i did a full wipe then at startup it did not turn on anymore i was all trying to put a rom stock but impossible with odin I had error messages but I could reinstall a custom ROM worked but it was not correct that I put an original rom so I insist I make a big mistake j I have to disable the unlock oem so the most way to put a custom rom or access the twrp I download a rom stock with samfirm but the same when I try to flash with odin his puts me failed or so pass but very quickly I do not know what to do with you any more ideas thanks?
I have this message on my s8 after odin told me fail.
sw check check fail bootlader device 3 binary 1
or
sw check check fail bootlader device 3 binary 2
sory bad english i french.
Click to expand...
Click to collapse
I don't know your device really well but that error means your flashing older firmware to your device than what you had on it. As in downgrading. Find a newer firmware and try in Odin 3.13
It's telling you that your device is 3 and your flashing binary 1 or 2
Use updato .com to download a recent firmware and use a stable version of odin (3.12/3.13), most recent versions of odin can cause problems
Hi there, I have a SM-A5000 2015.
Here is the problem. I have made it unrecognizable by ODIN (Seems because I tried to flash the bootloader of other A500 model, because I couldn't find any for A5000)
ODIN works before I tried that bootloader)
so I can't flash STOCK rom via ODIN, and I don't have backup sorry..
I have TWRP 3.0.2.1 flashed and usable.
I tried to flash custom ROM but I neither faced "device model not match error 7" or If I remove the whole model assert code or amend the model name, it gave me "unknown command error 7".
That's why I'd like to make a STOCK .TAR.MD5 into a TWRP flashable ROM, I have searched and found Android Kitchen. But it is too hard for me sorry.
Is there anyone who can advise me how to solve this..please? I'd be grateful for any help.
SM-A5000 2015
TWRP 3.0.2.1
ODIN 3.10.7
NO OS installed
(tried to install this ROM, but it didn't reboot successfully, and turned into some wrong color screen and stucked https://forum.xda-developers.com/t/rom-7-1-1-xtreme-os-for-a5-2015-v3-5-30-12-18.3779606/ )
STOCK ROM LINK: https://firmwarefile.com/samsung-sm-a5000
A5000..TGY.ZIP
Hello,
im trying to flash an AP file, modified via magisk app, to my Galaxy S10+ (Exynos, SM-G975F/DS, FW: G975FXXSEFUL1) via ODIN. I´ve installed the magisk app on this clean Samsung device to modify the AP file.
The bootloader is unlocked. But when ODIN is flashing USERDATA, the Downloadmode says: "official signed binarys only" and stops the flashing. The phone can be restored by flashing the original fw.
I´ve also tried to copy the AP file from an to the phone via adb. Also I tried use another official Samsung firmware (Android 12, G975FXXUEGULB) with the same result.
Can somebody help?
Thanks
Mirko