zuk z1 stuck at twrp logo - Zuk Z1 Q&A, Help & Troubleshooting

My zuk z1 switch off all of a sudden and now stuck at company logo. When i restarted it in recovery mode it is stuck at twrp logo. Don't know what to do. Kindly help!

devu.4 said:
My zuk z1 switch off all of a sudden and now stuck at company logo. When i restarted it in recovery mode it is stuck at twrp logo. Don't know what to do. Kindly help!
Click to expand...
Click to collapse
Flash using qfil

karimskcs said:
Flash using qfil
Click to expand...
Click to collapse
actually data partition is corrupted. can you tell me how to repair it?

karimskcs said:
Flash using qfil
Click to expand...
Click to collapse
i don't know how to. can you plz provide me link ?

devu.4 said:
i don't know how to. can you plz provide me link ?
Click to expand...
Click to collapse
By reading you comments what i understand is your mobile stuck at bootloop...
But you can access twrp...
Right
Try this
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
If doesn't work reply i will provide you the link for qfil

Related

HUAWEI P8lite stuck at Huawei logo... Help plz !

So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Xil0s said:
So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Click to expand...
Click to collapse
You need to wait 20 minutes after updating from sdcard.
Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
k i'll try again
Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
Don't work ;(
Xil0s said:
Don't work ;(
Click to expand...
Click to collapse
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Suleiman01 said:
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Click to expand...
Click to collapse
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Xil0s said:
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Click to expand...
Click to collapse
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Suleiman01 said:
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Click to expand...
Click to collapse
I can't get into fastboot and rescue mode but when I plug it into the compute, it charges. I didn't flashed any custom recovery :/

Struck in TWRP

i dont know what happended but after flasing my mobile is rebooting into recovery mode only i dont know what happended, plz help me
solved
i followed a youtube link thanks mate..
Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Now press enter, and write down another code.
2. Code (Text):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again!
Then go to main menu, go to Reboot and hit System.
SUBA36 said:
i dont know what happended but after flasing my mobile is rebooting into recovery mode only i dont know what happended, plz help me
Click to expand...
Click to collapse
Try this this solved my problem may be it'll help you also
Search on you tube "phone reboots in twrp recovery"
I am also having the same problem but my handset is Sony xperia z . so I have write same command or some other one.
in case if any phones are having boot loop in recovery mode,,,,.. try to flash recovery first and install recovery again and install CM13 with image file,,, and later configure the OS and restart the phone ,,while restarting press volume down and power button and the options will appears and select install update here select lineage OS 14 and gapps...... it works ,,,
Hope it helps..
I had the same problem after accepting lineage update installation and the 2 commands below solved the problem!
thank you very much

No Fastboot No Recovery Bricked

Hey guys My redmi 2 has bricked
No fastboot no recovery hang on mi logo
I am on aex ROM
Plz help in bringing my phone back
How did it happened?
What you did with your device before it get bricked?
Please elaborate your story.
I just flash stock rom with mi flash tool and after flashing phone gets hang on mi logo
No recovery No fastboot just hang on mi logo
did u try remove battery and boot into fastboot mode?
AKHILR4J said:
did u try remove battery and boot into fastboot mode?
Click to expand...
Click to collapse
Yes i tried but no luck
I think it is a hardware problem,i saw many cases like this,u should get into recovery when u remove the battery if not that's hardware problem only,,,
Thanks for all to rply
Got the solution and unbricked my device
jatintomar said:
Thanks for all to rply
Got the solution and unbricked my device
Click to expand...
Click to collapse
how?
Use a pc...boot phone into fast boot mode (remove the battery..insert again..vol down and power buttom to fastboot...if not showing any symbol ( blank) it usually will be in fastboot mode with a firmware corrupted...but it will connect to fast boot in pc)...connect it...make sure adb drivers are installed on the pc...download twrp.img for redmi 2...open cmd...hold shift and right click on the file of that twrp...select copy path... In cmd type " fastboot flash recovery (space) (crtl v) (enter)...after successful flash remove battery...insert it press all 3 buttons (vol up down, power key)....voilà ur booted with twrp.
AKHILR4J said:
how?
Click to expand...
Click to collapse
By test point method
jatintomar said:
By test point method
Click to expand...
Click to collapse
Can you please elaborate this? I am stuck with a similar problem.
aviaryan said:
Can you please elaborate this? I am stuck with a similar problem.
Click to expand...
Click to collapse
See this video https://m.youtube.com/watch?v=SBrjho2nziQ
Or read this tutorial
http://en.miui.com/thread-100553-1-1.html

Stuck in bootloop after installing lineage os update

Guys i was in lineage-14.1-20170411-nightly-ham update after a while i download the latest update via OTA . Installed it manually using TWRP now unable to use my phone , always entering into the twrp mode . Even tried flashing the old version still stuck in the twrp loop PLz help .
mmprknown said:
Guys i was in lineage-14.1-20170411-nightly-ham update after a while i download the latest update via OTA . Installed it manually using TWRP now unable to use my phone , always entering into the twrp mode . Even tried flashing the old version still stuck in the twrp loop PLz help .
Click to expand...
Click to collapse
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
Thanks man!!!!!!
finally it worked
mmprknown said:
Thanks man!!!!!!
finally it worked
Click to expand...
Click to collapse
Welcome..
Copy the code it might be helpful next time.
I'm getting a syntax error saying expected ")".
I was entering "Code (Text):" also in terminal that was the mistake i think. Without it I did it. Now my hone has restarted. I am really really thankful to you.
Keep working towards this community.
I had installed zui 2.5 rom, it was working all fine, I didi factory reset without knowing that it doesn't work on flashed rom and rooted device. Now my phone is opening on TWRP screen, i installed rom again not working, then I saw your comment, I did these two commands in terminal but it is showing
syntax error: unexpected word (expecting ")" ) even when I copied exactly same code still. Please help ASAP!!
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
akanshajain said:
I was entering "Code (Text):" also in terminal that was the mistake i think. Without it I did it. Now my hone has restarted. I am really really thankful to you.
Keep working towards this community.
I had installed zui 2.5 rom, it was working all fine, I didi factory reset without knowing that it doesn't work on flashed rom and rooted device. Now my phone is opening on TWRP screen, i installed rom again not working, then I saw your comment, I did these two commands in terminal but it is showing
syntax error: unexpected word (expecting ")" ) even when I copied exactly same code still. Please help ASAP!!
Click to expand...
Click to collapse
Syntax error means you are missing something i used this code several times when i stucked at twrp screen.
Try to enter manually.
I will ask this to any senior member and comment you same...
Guys i recently updated to nougat on lineage 14.1 using twrp and supersu but when i got an auto update from the update option the download crashed three times after around 300mb the fingerprint scanner is not working properly can anyone give me a hint on whether the next update will hold the solution for this issue or not?
Please help me
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
Hi Karim,
Can you help with my case?
I can use CM13, but CM14 or 7.xx will be loop again
https://forum.xda-developers.com/zuk-z1/help/boot-loop-cyanogen-logo-t3666056
stuck on rebooting
phone keeps on rebooting, even booted into twrp but phone rebooted within 2-3 seconds. Had to remove the battery so the phone could stop rebooting, please help guys.
Manual Update from March 7 2018 build to March 14 2018.
Hey guys! I got this update recently and i wanted to install it manually after being unable to update automatically from the installer. So, i flashed the update file and everything was fine until the first 3-4 minutes but then i realized that my phone got into a bootlool.
Things I've tried,
1. Wiped Dalvik Cache and other cache from recovery.
2. Tried reinstalling the same file hoping it would save me.
3. Googled about it and found a guy named Karmicks giving the terminal code for exiting the loop. Still no luck!
I was on Nextbit Robin Lineage OS 14.1 Nightly ether build March 7 2018 before flashing.
It's my only device. I need help in getting it out of bootloop without any data loss ( exception if it's a serious case ).
Kindly let me know if you've got anything that can help me. Email me at "[email protected]"
Avgk Karthik said:
Hey guys! I got this update recently and i wanted to install it manually after being unable to update automatically from the installer. So, i flashed the update file and everything was fine until the first 3-4 minutes but then i realized that my phone got into a bootlool.
Things I've tried,
1. Wiped Dalvik Cache and other cache from recovery.
2. Tried reinstalling the same file hoping it would save me.
3. Googled about it and found a guy named Karmicks giving the terminal code for exiting the loop. Still no luck!
I was on Nextbit Robin Lineage OS 14.1 Nightly ether build March 7 2018 before flashing.
It's my only device. I need help in getting it out of bootloop without any data loss ( exception if it's a serious case ).
Kindly let me know if you've got anything that can help me. Email me at "[email protected]"
Click to expand...
Click to collapse
But you are posting in zuk z1 thread ml?
Sent from my Lenovo Zuk Z1 using XDA Labs
Sharma_Ji said:
But you are posting in zuk z1 thread ml?
Click to expand...
Click to collapse
I thought it was a general thread. I'll try to search a more relevant one now. Deleting the post
No Such Directory Found
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
No such diretory found..... please help...
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
It's work for Lenovo K6 power(k33a42)?
Iam also having same bootloops problem.
thankyou soo much bro it worked on my moto e5 plus (hannah)
same problem man .
i had flashed multiple rom but at last it will throw me to twrp only

Accidently took OTA, now I'm stuck in boot loop with twrp

I accidently took an OTA while on a rom. Now I can boot twrp and download mode, but when I enter download mode it goes static screen thing. Lgup recognizes the devices but no option to add file or anything ? Please help
Boot to TWRP
adb shell
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Reboot
-- Brian
thrgk said:
I accidently took an OTA while on a rom. Now I can boot twrp and download mode, but when I enter download mode it goes static screen thing. Lgup recognizes the devices but no option to add file or anything ? Please help
Click to expand...
Click to collapse
Same happened to me. I got out of it by manually booting into TWRP with power and volume down and then restarting as normal
runningnak3d said:
Boot to TWRP
adb shell
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Reboot
-- Brian
Click to expand...
Click to collapse
Hi bro...
After that phone now stck in LG Logo.
before I ve Formatted Data.... and phone do not enter in donload modo..What should i do in this case!!!
Thanks
Sorry my english
luis.manresa14 said:
Hi bro...
After that phone now stck in LG Logo.
before I ve Formatted Data.... and phone do not enter in donload modo..What should i do in this case!!!
Thanks
Sorry my english
Click to expand...
Click to collapse
HELLO.
Can someone give a hand with this?

Categories

Resources