Struck in TWRP - Zuk Z1 Q&A, Help & Troubleshooting

i dont know what happended but after flasing my mobile is rebooting into recovery mode only i dont know what happended, plz help me

solved
i followed a youtube link thanks mate..
Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Now press enter, and write down another code.
2. Code (Text):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again!
Then go to main menu, go to Reboot and hit System.

SUBA36 said:
i dont know what happended but after flasing my mobile is rebooting into recovery mode only i dont know what happended, plz help me
Click to expand...
Click to collapse
Try this this solved my problem may be it'll help you also
Search on you tube "phone reboots in twrp recovery"

I am also having the same problem but my handset is Sony xperia z . so I have write same command or some other one.

in case if any phones are having boot loop in recovery mode,,,,.. try to flash recovery first and install recovery again and install CM13 with image file,,, and later configure the OS and restart the phone ,,while restarting press volume down and power button and the options will appears and select install update here select lineage OS 14 and gapps...... it works ,,,
Hope it helps..

I had the same problem after accepting lineage update installation and the 2 commands below solved the problem!
thank you very much

Related

Download mode for unbrick after failed OTA-Flash of knock code

Hi
I tried to flash the knock code for open-devices over a rooted stock rom with custom recovery - so everytime I boot it automatically boots into custom recovery.
How do I enter download-mode to unbrick it using the offline-fix for the LG R&D Test tool? Holding volume up while plugging in the cable boots into TWRP and holding volume up+power also boots to TWRP..
Everything I try boots into TWRP even if it should boot to Download-Mode
SOLVED: (my problem was wrong searches within XDA and Google - "no boot after flashing knock code" isn't "LG G2 download mode doesn't working")
1. Open in TWRP:
Advanced - Terminal - Select / as folder - go to terminal
2. Enter
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
and hit "GO"
3. Enter
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
and hit "GO"
4. Back to main menu in TWRP - hit reboot -> System
now worked...

[Q] Bricked LG G2, Stuck at TWRP, No Download mode...try a lot of things plz help.

i bricked my LG G2 after instaling TWRP, i went to the app, test it by clicking reboot , saw it is warked fine and tap reboot- system.
its stuck on the LG logo on start.
i tryed to "factory reset" my phone by - wipe- advanced wipe.....
tryed also the commads:
"before trying anything else just type in these commands
What worked for me was from the TWRP terminal command was to type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
got help from the IRC xda-devs for the second step to complete the fix."
still stuck.
mybe i done some of thoes thing wrong to fix that.....i tryed the command thing 3 times.
*sorry for my bad English.
plz help!!!

zuk z1 stuck at twrp logo

My zuk z1 switch off all of a sudden and now stuck at company logo. When i restarted it in recovery mode it is stuck at twrp logo. Don't know what to do. Kindly help!
devu.4 said:
My zuk z1 switch off all of a sudden and now stuck at company logo. When i restarted it in recovery mode it is stuck at twrp logo. Don't know what to do. Kindly help!
Click to expand...
Click to collapse
Flash using qfil
karimskcs said:
Flash using qfil
Click to expand...
Click to collapse
actually data partition is corrupted. can you tell me how to repair it?
karimskcs said:
Flash using qfil
Click to expand...
Click to collapse
i don't know how to. can you plz provide me link ?
devu.4 said:
i don't know how to. can you plz provide me link ?
Click to expand...
Click to collapse
By reading you comments what i understand is your mobile stuck at bootloop...
But you can access twrp...
Right
Try this
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
If doesn't work reply i will provide you the link for qfil

Stuck in bootloop after installing lineage os update

Guys i was in lineage-14.1-20170411-nightly-ham update after a while i download the latest update via OTA . Installed it manually using TWRP now unable to use my phone , always entering into the twrp mode . Even tried flashing the old version still stuck in the twrp loop PLz help .
mmprknown said:
Guys i was in lineage-14.1-20170411-nightly-ham update after a while i download the latest update via OTA . Installed it manually using TWRP now unable to use my phone , always entering into the twrp mode . Even tried flashing the old version still stuck in the twrp loop PLz help .
Click to expand...
Click to collapse
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
Thanks man!!!!!!
finally it worked
mmprknown said:
Thanks man!!!!!!
finally it worked
Click to expand...
Click to collapse
Welcome..
Copy the code it might be helpful next time.
I'm getting a syntax error saying expected ")".
I was entering "Code (Text):" also in terminal that was the mistake i think. Without it I did it. Now my hone has restarted. I am really really thankful to you.
Keep working towards this community.
I had installed zui 2.5 rom, it was working all fine, I didi factory reset without knowing that it doesn't work on flashed rom and rooted device. Now my phone is opening on TWRP screen, i installed rom again not working, then I saw your comment, I did these two commands in terminal but it is showing
syntax error: unexpected word (expecting ")" ) even when I copied exactly same code still. Please help ASAP!!
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
akanshajain said:
I was entering "Code (Text):" also in terminal that was the mistake i think. Without it I did it. Now my hone has restarted. I am really really thankful to you.
Keep working towards this community.
I had installed zui 2.5 rom, it was working all fine, I didi factory reset without knowing that it doesn't work on flashed rom and rooted device. Now my phone is opening on TWRP screen, i installed rom again not working, then I saw your comment, I did these two commands in terminal but it is showing
syntax error: unexpected word (expecting ")" ) even when I copied exactly same code still. Please help ASAP!!
Click to expand...
Click to collapse
Syntax error means you are missing something i used this code several times when i stucked at twrp screen.
Try to enter manually.
I will ask this to any senior member and comment you same...
Guys i recently updated to nougat on lineage 14.1 using twrp and supersu but when i got an auto update from the update option the download crashed three times after around 300mb the fingerprint scanner is not working properly can anyone give me a hint on whether the next update will hold the solution for this issue or not?
Please help me
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
Hi Karim,
Can you help with my case?
I can use CM13, but CM14 or 7.xx will be loop again
https://forum.xda-developers.com/zuk-z1/help/boot-loop-cyanogen-logo-t3666056
stuck on rebooting
phone keeps on rebooting, even booted into twrp but phone rebooted within 2-3 seconds. Had to remove the battery so the phone could stop rebooting, please help guys.
Manual Update from March 7 2018 build to March 14 2018.
Hey guys! I got this update recently and i wanted to install it manually after being unable to update automatically from the installer. So, i flashed the update file and everything was fine until the first 3-4 minutes but then i realized that my phone got into a bootlool.
Things I've tried,
1. Wiped Dalvik Cache and other cache from recovery.
2. Tried reinstalling the same file hoping it would save me.
3. Googled about it and found a guy named Karmicks giving the terminal code for exiting the loop. Still no luck!
I was on Nextbit Robin Lineage OS 14.1 Nightly ether build March 7 2018 before flashing.
It's my only device. I need help in getting it out of bootloop without any data loss ( exception if it's a serious case ).
Kindly let me know if you've got anything that can help me. Email me at "[email protected]"
Avgk Karthik said:
Hey guys! I got this update recently and i wanted to install it manually after being unable to update automatically from the installer. So, i flashed the update file and everything was fine until the first 3-4 minutes but then i realized that my phone got into a bootlool.
Things I've tried,
1. Wiped Dalvik Cache and other cache from recovery.
2. Tried reinstalling the same file hoping it would save me.
3. Googled about it and found a guy named Karmicks giving the terminal code for exiting the loop. Still no luck!
I was on Nextbit Robin Lineage OS 14.1 Nightly ether build March 7 2018 before flashing.
It's my only device. I need help in getting it out of bootloop without any data loss ( exception if it's a serious case ).
Kindly let me know if you've got anything that can help me. Email me at "[email protected]"
Click to expand...
Click to collapse
But you are posting in zuk z1 thread ml?
Sent from my Lenovo Zuk Z1 using XDA Labs
Sharma_Ji said:
But you are posting in zuk z1 thread ml?
Click to expand...
Click to collapse
I thought it was a general thread. I'll try to search a more relevant one now. Deleting the post
No Such Directory Found
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
No such diretory found..... please help...
karimskcs said:
In TWRP, Go to advance, then go to Terminal and write down these codes one-by-one.
1. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Now press enter, and write down another code.
2. Code (Text): dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
Press enter again! Then go to main menu, go to Reboot and hit System. You're done, enjoy!
Click to expand...
Click to collapse
It's work for Lenovo K6 power(k33a42)?
Iam also having same bootloops problem.
thankyou soo much bro it worked on my moto e5 plus (hannah)
same problem man .
i had flashed multiple rom but at last it will throw me to twrp only

Phone boots into recovery repeatedly

Hi,I am using Lenovo zuk Z1. I flashed lineage os 14.1 .
As there was a OTA update I tried to install it.But it failed.So I tried manually flashing it.But after flashing my phone boots only into twrp mode repeatedly.I usually​ flash the update manually.But this time I tried through the lineage update and it failed. So I went back manually flashing it. I am unable to solve this issue. So can anyone help me?
Flash a new rom ( rr, lineage, nuclear,... )
Then reboot
If it continues to be rebooted into recovery
Try this code in twrp terminal
You can find it in the Advance, and then choose twrp terminal
Just find it, twrp terminal
Then write that code
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
ENTER
Then wait for a while
Then write
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
ENTER
then reboot
It will work
Yashwanth98 said:
Hi,I am using Lenovo zuk Z1. I flashed lineage os 14.1 .
As there was a OTA update I tried to install it.But it failed.So I tried manually flashing it.But after flashing my phone boots only into twrp mode repeatedly.I usually​ flash the update manually.But this time I tried through the lineage update and it failed. So I went back manually flashing it. I am unable to solve this issue. So can anyone help me?
Click to expand...
Click to collapse
This will fix it without losing any data. (NO FACTORY RESET NEEDED)
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
PRESS ENTER
THEN TYPE
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
THEN PRESS ENTER
REBOOT
This should boot up your phone without any changes.

Categories

Resources