Related
I had Mint Jelly2.1 installed and everything was working fine.
it started when I had used the APK Hide It Pro. I was in the process of hiding videos and I noticed that my phone got rebooted and got stock in the Samsung boot up image with the Custom Lock image.
I tried nandroid restore, 2 images, but both also failed to restore / bootup.
I tried re-installing ROM and it was successful but during reboot, it will still get stock on the boot image.
Last step.
I used ODIN to restore the stock ROM and ODIN was able to install and reset. And my phone rebooted but still got stock on the Samsung Logo with CUstom Lock Screen.
What else can I do to fix this?
Thank you.
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
I had tried to restore/flash from recovery before ODIN and it all Failed.
Anyway, the last step ODIN restore and it was still stock at the Samsung Logo with Lock image.
I left the phone to charge the whole night and this morning when I turned it on, it was able to start properly with ODIN stock ROM.
I tried to go to recovery, and can only be done manually, and it was not the TWRP recovery but the stock one, with very small characters.
I tried to install Mint Jell2.1 right away but just reboots.
I realized that I might need to root it again and downloaded the Tool and re-loki'ed/rooted and installed TWRP.
Now, I am able to install Mint Jelly 2.1 and restoring all my apps.
I appreciate the comment.
Thank you.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
CZ Eddie said:
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
Click to expand...
Click to collapse
I can confirm this works happened to me yesterday.
leoj85 said:
I can confirm this works happened to me yesterday.
Click to expand...
Click to collapse
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
I got stuck to 1st boot image of Samsung with Lock Custom Icon.
I did format data/factory reset/clear cache/dalvik.. all of the wipe ootions.
I flashed a new ROM, successful, rebooted pass the logo and booted fine. I did not change any settings yet and I rebooted to check if it will get stuck again and sure after reboot, it got stuck again on the 1st image that shows up : Samsung Logo with the Lock Custom Icon.
qwer43 said:
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
Click to expand...
Click to collapse
IMPORTANTwhen using*twrp*recoverydo not choose "format data"(that option will ask you to type "yes")what if i did?rom will not boot past "padlock" boot screen orrom will not boot on second reboot*help!! I did, I did*1. sigh2. d/l odin3. d/l odin stock restore MDL4. let it do its thang5. after its complete it will be stuck at padlock6. should have "rtfm" huh?*7. pull battery8. hold home button, vol-up, power at same time9. when phone vibrates, release power, while still holdingvol-up, and home button10. you will now be in "stock recovery"11. wipe factory reset then wipe cache12. reboot*13. swear you will never "ignore instructions"
I have to think I'm not the first to be in this situation but my searches didn't turn up anything that looked familiar.
I rooted the stock phone and installed TWRP 2.6xx a month or two ago with no issues. Everything's been running great and I decided it was time to make another backup using TWRP.
After a successful backup I wiped dalvik and cache out of habit and went to reboot -- TWRP said I was not rooted and wanted to know if I wanted to install SuperSU? This question was unexpected since I'd been rooted for a long time, and I decided to just say yes. The phone rebooted and stopped at the Samsung Galaxy S4 boot screen. I did up-volume reboot to recovery, but it seemed to hang at the TWRP blue screen -- I later discovered it will eventually get to the menu after a minute or two of the blue screen. I tried wiping cache and dalvik again and rebooting -- every time I try to reboot now it asks if I want to install SuperSU -- whether I say yes or no seems to make no difference -- I've tried both several times. Every time it hangs at the Samsung boot screen, or it takes forever to get to TWRP if I'm booting to recovery.
I've tried wiping cache, dalvik and data with no improvement. I finally tried formatting data, but again no improvement. I also tried restoring my backup several times and wiping cache and dalvik but still stuck.
I prior to today's problems I'd used TWRP a number of times and I don't recall it asking the SuperSU question, so I am thinking that is the key to this problem, and I'm wondering if anyone knows what it means?
You need to go to 2502 twrp, 26+ has hanging problems and possible Partition issues, also what rom are you on? Do you need to flash super su along with the rom /gapps?
Here's the twrp forum for us SPH-L720
The last page has a download link for the most stable build for us good luck!
http://forum.xda-developers.com/showthread.php?t=2262999
I'm running what came on the phone, just unlocked, rooted, and installed TWRP.
I ran CM10.1 on my previous phone and currently on my tablet, but my impression from running it previously is CM is a downgrade in voicemail functionality (you get these annoying text messages and have to call the voicemail), and I'm assuming it doesn't support the special GS4 hardware features like being able to hover your finger.
OK I installed TWRP 2502 and it now boots to recovery normally. However, it still asks me before rebooting if I want to install SuperSU, and it hangs on the Samsung boot screen.
Nerva said:
OK I installed TWRP 2502 and it now boots to recovery normally. However, it still asks me before rebooting if I want to install SuperSU, and it hangs on the Samsung boot screen.
Click to expand...
Click to collapse
How did you root? CF auto root also installs SuperSU
Do you have a back up from when you were rooted? IF twrp keeps giving you problems, use cwm, are you able to get past the Samsung boot..
Yeah that's what I did back when I rooted it months ago. I tried running CF auto root again today and it didn't work, so I ran it from Odin and it did work that time, but there was no change -- still hangs on the Samsung boot screen, although now I'm back to the stock recovery. So I tried installing the stock MF9 firmware from Odin -- still hangs on the boot screen. I don't know what to do at this point...
After mf9 install avd stock recovery did you factory reset
Yes, I did a factory reset -- followed the video instructions by qbking77. Still hangs on the boot screen.
Take out battery.. Put back in. Go to stock recovery, holding all 3 buttons volume up factory reset.. If you used odin abd flashed mf9 it should fix you?
---------- Post added at 06:02 PM ---------- Previous post was at 05:54 PM ----------
Well I guess I tried man, someone who has more knowledge should chime in now
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
This
http://forum.xda-developers.com/showthread.php?t=2400192
Im also stucked with the same problem!! After flashing my rom succesfully it just ask ur device is not rooted swipe to install!! I tried all the posiblities!! but i stuck with the boot image!! pls help me!!
From experience it sounds like you should head over to sammobile and Odin back to stock and start fresh.
1. Odin to stock
2. Root phone
3. Put desired recovery
4. Flash ROM (be sure to read dev install instructions some require reboot of recovery after wipe)
5.try to restore backup (best if you flash ROM that is backup then restore backup)
6.if you went into nae or ng2 you cannot downgrade to me
7.google has many solutions
Sent from my SCH-I545 using XDA Free mobile app
Sorry for necro, but did anyone figure out a solution to this? This just happened to me.
Just Reflash it
We have the same issue, tried to install supersu binary, after installing through twrp recover, my phone went bootloop, as i've tried to search the internet, the issue doesn't fix by by most of the users unless they reflash their device. though its a bit hassle starting from zero, but atleast, you got ur device back
This helps me:
1. Run Odin on your computer and, after entering download mode on your phone, establish a connection between your devices with the help of the USB cable.
2.Note: for download mode – power off your smartphone and then press and hold, at the same time, the Power, Volume Down and Home buttons.
3.Odin will try to recognize your device; if everything works as expected, on the program the “added” message will be displayed and the ID:COM field will be turned yellow, or blue. (Note: if that’s not happening, unplug the USB connection, close Odin, force restart your phone and reinstall the USB drivers on your computer before retrying the steps from above)
4.From the program click on the “PA” button and load the custom recovery image; don’t check Re Partition and Auto Reboot options.
5.When done, click on “start” and wait while TWRP recovery is being added on your phone
6.In the end, Odin will display the “pass” message and the ID:COM filed will be turned green (or other color) with message - RESTART; you can then remove the USB cord and reboot your smartphone.
I have had this prob on a few things , if you have a backup,flash any mod that will go to the device will do then run the backup and reflash should work .and if you have twrp try to reformat all but the system and see if that helps.
Good luck.
Hi to everyone.
Today, I installed the TWRP and the ROM and both were installed correctly on a Le Pro3 X722. The problem started when the Google services were updating. Suddenly, the phone restarted and entered in a bootloop. I was not even able to enter the TWRP. The page freeze on LE-Recovery logo and then crashed (fill full of lines). I disconnected the battery for a while and then, I was able to enter the TWRP for 2 time but recovery crashes in few seconds. I wanted to wipe and install a clean rom but I cannot enter TWRP anymore.
Please, Is there someone that could help me?
Thank you very much in advance
PS. My phone is not recognized via ADB. I tried with the AIO Tool but my device is not detected.
Hi, I followed the whole process for Qfil explained here:
Leeco Le Pro3 x720 Hard Brick
So the phone was running lineageos 15.1 nightly from 22.08 which i guess was kind of really unstable (even opening twitter in the morning could turn off the device. It could be turned back on right away though), xposed framework v90 w/yt...
forum.xda-developers.com
Installation was correct but nothing change in my phone:
- same start page and bootloop
- Same problem trying to access the recovery.
Now, i can connect via fastboot and I would like to install a fastboot rom (preferable EUI stock 20) but I cannot find one. All links are dead.
Thank you very much in advance
Hi guys im a bit rusty again in all this since i rooted my S3 and HTC desire years ago ,
I have an Galaxy S5 SM-G900F (bought seperately without any provider)(EU)
after 2-3 months now and getting the official android 5.0 upgrade, i thought it be time to Root my device again ,
i followed this link and how to from ChainFire "http://forum.xda-developers.com/showthread.php?t=2696537"
wich i been using on my Galaxy Tab 7 Lite(T110) as well and worked flawlessly
I followed the exact steps as usual , rooting went fine, phone rebooted as it should , i updated SUPERSU and its binaries and installed Ericson's Busybox,. ,and everything worked as it should ,
then i put off my phone and boot in to recovery mode to flash the Philz_touch_6.26.1-klte.zip (touch recovery)
when im in my stock recovery i facepalm'd myself because i hadnt put the flashable recovery file on my internal storage yet ,
so i wanted to reboot back in the phone so i could put the file on my internal storage so id be able to flash it from stock recovery ,,..
this is where it all got strange,.
My phone stays black after Boot logo, gives me errors like ,. SYSTEM UI STOPPED ,. and so on for about everything that keep the phone running , i mean really everything STOPS , after about 15 minutes and klicking away all the Stopped msg's , it just reboots again to do the same.
i tried starting the phone in SAFE MODE ,. . Same thing,...
this all just came up after i booted to STOCK RECOVERY ,. and back to Android without changing anything,.
Android 5.0
Stock Rom
CF Autoroot klte SM-G900F
Please help ?
Thank you in advance
Mike130784 said:
Hi guys im a bit rusty again in all this since i rooted my S3 and HTC desire years ago ,
I have an Galaxy S5 SM-G900F (bought seperately without any provider)(EU)
after 2-3 months now and getting the official android 5.0 upgrade, i thought it be time to Root my device again ,
i followed this link and how to from ChainFire "http://forum.xda-developers.com/showthread.php?t=2696537"
wich i been using on my Galaxy Tab 7 Lite(T110) as well and worked flawlessly
I followed the exact steps as usual , rooting went fine, phone rebooted as it should , i updated SUPERSU and its binaries and installed Ericson's Busybox,. ,and everything worked as it should ,
then i put off my phone and boot in to recovery mode to flash the Philz_touch_6.26.1-klte.zip (touch recovery)
when im in my stock recovery i facepalm'd myself because i hadnt put the flashable recovery file on my internal storage yet ,
so i wanted to reboot back in the phone so i could put the file on my internal storage so id be able to flash it from stock recovery ,,..
this is where it all got strange,.
My phone stays black after Boot logo, gives me errors like ,. SYSTEM UI STOPPED ,. and so on for about everything that keep the phone running , i mean really everything STOPS , after about 15 minutes and klicking away all the Stopped msg's , it just reboots again to do the same.
i tried starting the phone in SAFE MODE ,. . Same thing,...
this all just came up after i booted to STOCK RECOVERY ,. and back to Android without changing anything,.
Android 5.0
Stock Rom
CF Autoroot klte SM-G900F
Please help ?
Thank you in advance
Click to expand...
Click to collapse
Boot to recovery, wipe the caches, reboot, see how you get on then
*Detection* said:
Boot to recovery, wipe the caches, reboot, see how you get on then
Click to expand...
Click to collapse
thank you for your reply
i have wiped the Cache partitions as its the only cache to wipe in stock recovery,. rebooted ,. but still the same thing
Mike130784 said:
thank you for your reply
i have wiped the Cache partitions as its the only cache to wipe in stock recovery,. rebooted ,. but still the same thing
Click to expand...
Click to collapse
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
*Detection* said:
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
Click to expand...
Click to collapse
i used Odin3-v3.07
but after flashing the root everything worked installed superSU and updated it and its binaries and installed busybox,.
it all stopped working after i went into Stock Recovery and back
id prefer not to do a factory reset Wipe,. unless i really have to to fix it ,.
im going to try reflash with the latest version then,.
i have swapped SD card to galaxy tab to put the Flashable touch recovery on the SD card, and swapped back to the phone so i could Flash the Recovery when im in stock ,.
but ill try flashing Root with latest Odin first.. thank you
*Detection* said:
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
Click to expand...
Click to collapse
the new odin is a bit less informative (to me as beginner)
i managed to use AP to flash the root again
all goes fine , it reboots
and its now upgrading android as it says and opening app's
then Black screen again,. i klick a button,. and it shows me again all the STOPPED msg's of all internal apps that are crashing,. litterally all apps,
what can i do ?
If clearing cache didn't work, fixing permissions in recovery didn't work, only thing left I can think of is factory reset
--
*Detection* said:
If clearing cache didn't work, fixing permissions in recovery didn't work, only thing left I can think of is factory reset
--
Click to expand...
Click to collapse
i cant fix persmission in stock recovery and flashing the philz touch recovery didnt work something about not verify signature,.
al i can do i guess is wipe data factory reset ,.but im affraid it wont fix anything
Try TWRP recovery instead
http://teamw.in/project/twrp2/229
No reason a factory reset won't fix things, worst comes to worst, flash the whole ROM again from ODIN, that will fix everything as it wipes and reinstalls the lot
Grab a stock ROM from sammobile
Thank you for all your replys mate..
I managed to get it working again by doing a factory reset in stock recovery after I flashed root with latest odin
Even tho it was my last resort there was nothing else I guess .
I'm not sure tho if this will happen again when I go back to recovery like I did when this all happend the first time while I actually want to flash a more advanced recovery then stock recovery ..
But I'll take my chances and just leave it as it is
Again thank you for your help and suggestions .
This thread could be closed
Sent from my SM-G900F using XDA Free mobile app
Pleased you got it working again, I would say if you think you might want to flash another advanced recovery in the future, it might be best to do that now since you have already factory reset the phone, that way if this happens again, you don't lose months of data and settings and files that you have gathered between now and whenever you decide to flash recovery
*Detection* said:
Pleased you got it working again, I would say if you think you might want to flash another advanced recovery in the future, it might be best to do that now since you have already factory reset the phone, that way if this happens again, you don't lose months of data and settings and files that you have gathered between now and whenever you decide to flash recovery
Click to expand...
Click to collapse
i have actually ,. i installed the TWRP u mentioned,. by taking there app from the Playstore,. and flashed the new recovery, within android and without rebooting (just in case)
im used to the old CWM thats why i first wanted the Touch recovery as its based on it,
but always open for trying new things
Thank you
Good stuff
Id say the whole entering recovery / apps crashing thing was a problem with the ODIN version you used to root, too old for Lollipop is my guess, so I wouldn't worry about entering recovery again.
Hi everyone! Surfed the forums in the past for some minor help but never needed to register till now. I've tried everything and can't get my phone to boot.
So last night while camping my phone started boot cycling out of nowhere. I let it try a few times and then removed the battery and went to sleep. This morning I woke up and tried a few more times, replaced the battery with a non-stock double-capacity one I have, and still cycled. Sometimes it restarts on the Galaxy Note 4 logo, and sometimes on the Sprint logo. It will do this indefinitely. At one point It finally booted and said it was updating apps (like from an Android update, not the regular app updates.) Before I could do anything else with it though, the battery wiggled loose and it started power cycling again. Because of this one boot I think the root cause is related to an Android update that decided to run without my permission.
So I gave up and drove hoe from camping. Tonight I had tried everything I could find from factory reset to the toolkit to Odin and nothing has had any effect. The toolkit didn't see the device, and Odin failed to flash. Can anyone help me? I can boot to recovery and I can get into download mode, but nothing seems to work. The phone isn't hard bricked, but everything I can find on soft brick solutions hasn't worked. Thanks in advance!
~Evan
Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.
ekuest said:
Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.
Click to expand...
Click to collapse
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
Ok thanks that worked! I got into TWRP by setting Odin to not reboot. If I let it reboot then it just restarted after the TWRP flash and kept power cycling like before. If I uncheck auto reboot in Odin then after the flash I can pull the battery (can't figure out any other way to turn the phone off) and then when I restart in recovery mode it goes into TWRP. From there I tried a factory reset (wipe data, cache, and dalvik) and that didnt fix the power cycling. Do I have to flash TWRP and then immediately flash a rom right after? Or should I try an advance wipe in TWR, or maybe "repair or change file system" from the advanced wipe menu?
Bump? I still can't boot my phone. Got into TWRP but no idea what to do from there. I can't flash any rom successfully in Odin and I can't get the phone to boot. Now it just hangs on the "Samsung Galaxy Note 4" splash screen, doesnt even go to the "Samsung" screen or the "Sprint" screen like it used to.
Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.
ekuest said:
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.
Click to expand...
Click to collapse
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp
Trex888 said:
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp
Click to expand...
Click to collapse
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.
ekuest said:
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.
Click to expand...
Click to collapse
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13
Trex888 said:
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13
Click to expand...
Click to collapse
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
ekuest said:
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
Click to expand...
Click to collapse
Seandroid thing is normal if you are running custom rom. Cuz any custom comes with root and custom kernel so nothing to worry.
Did you tried another battery?
And how long did you wait to phone boot after flashing cm13 ?
Go to sprint note 4 xda forum and try different roms and be patient and wait atleast 20min to phone boot
You cannot flash cm13 without gapps and make sure gapps is for 6.0.1 marshmallow.
Once your phone boot normal go to download mode and flash 6.0.1 firmware in odin and after finish flash immediately go to stock recovery and do factory reset your phone will be normal.
Make sure your battery is not damaged maybe it is causing shut off. Issue.
Well since I can't flash CM13 with TWRP and I can't flash a stock rom with Odin, what other options do I have? Is there any way to get a bcakup file that someone else has made on their Note 4 in TWRP and try restoring from that? I've also read about ADB sideloading and another recovery called CWM or something and I don't know if those will be any different or just more failed flashes. I think the problem is deeper in the phone since it wouldn't boot with the stock rom and now it won't boot with CM13.
EDIT: Just saw your last post. I have 2 batteries, one samsung stock and one aftermarket TechOrbits double capacity. The phone does the same thing with either one so I ruled out the battery a while ago. Think there's any chance theyre both bad and I should order a new one? I don't really want to invest more money into a dead phone. I don't think I waited that long after installing CM13. I'll try it again and give it a half hour. I doubt that will change anything though.
EDIT2: Also when I go to download mode (says "ODIN MODE <HIGH SPEED>" at the top) it has some red text at the bottom I think might mean something. Does this mean anything to you or is it typical?
UDC START
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: ABOOT
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
a safe haven said:
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
Click to expand...
Click to collapse
You didn't specify your exact phone model, so assuming KLTE
AFAIK aroma does not work well with our TWRP
Can you pull the battery and then boot directly to recovery so you can wipe system/cache/Dalvik and then flash the ROM again?
If recovery is messed up, can you pull battery, then boot to download mode so you can reflash TWRP in Odin/Heimdall, or better yet flash latest stock Rom (caution if you have a g900V/A with stock locked bootloader) in Odin/Heimdall, followed by TWRP?
Post again if you need more help, and try to include as many specifics as possible eg exact phone model, TWRP version, Rom zip filename, Gapps, etc. I'll try to help if I can
I am very sorry for not posting the model number, mine is G900I (KLTEDV), everytime i turn on the phone it just keeps booting onto the recovery and goes to install the viper4android but it fails to do that and reboots again and again, its impossible to do anything basically, not booting onto the rom or anything. Recovery version is TWRP 3.2.2-0, it opens up directly to the zip file which is viper4androidfx-aroma.zip and tries to flash it and crashes and the whole process starts again, pulling the battery didnt break the chain it just keeps rebooting to do that again!
I reflashed a new twrp recovery ver 3.2.3-0, but it still tries to flash that zip file again! Even after deleting the file itself it still tries to flash it and keeps rebooting!
How do i get rid of this twrp loop!? This is so weird!
P.S: After reflashing twrp the phone boots to the rom normally but i cant access recovery anymore, whenever i go to recovery it goes on in an infinite bootloop (cleared cache and dalvik cache using es explorer root), I am also on LineageOs 16.0, tried stock recovery but the stock recovery also keeps bootlooping.
P.S this viper4android is a magisk module!
NVM, solved it by flashing stock rom! Thanks!